nuttx/boards/arm/lpc43xx/lpc4357-evb/scripts/spificonfig.ld

133 lines
4.7 KiB
Plaintext
Raw Normal View History

/****************************************************************************
* boards/arm/lpc43xx/lpc4357-evb/scripts/spificonfig.ld
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/*
* Power-Up Reset Overview
* -----------------------
*
* The ARM core starts executing code on reset with the program counter set
* to 0x0000 0000. The LPC43xx contains a shadow pointer register that
* allows areas of memory to be mapped to address 0x0000 0000. The default,
* reset value of the shadow pointer is 0x1040 0000 so that on reset code in
* the boot ROM is always executed first.
*
* The boot starts after reset is released. The IRC is selected as CPU clock
* and the Cortex-M4 starts the boot loader. By default the JTAG access to the
* chip is disabled at reset. The boot ROM determines the boot mode based on
* the OTP BOOT_SRC value or reset state pins. For flash-based parts, the part
* boots from internal flash by default. Otherwise, the boot ROM copies the
* image to internal SRAM at location 0x1000 0000, sets the ARM's shadow
* pointer to 0x1000 0000, and jumps to that location.
*
* Of course, using JTAG the executable image can be also loaded directly
* into and executed from SRAM.
*/
MEMORY
{
progmem (rx) : ORIGIN = 0x14000000, LENGTH = 1024K
datamem (rwx) : ORIGIN = 0x10000000, LENGTH = 128K
}
OUTPUT_ARCH(arm)
ENTRY(__start) /* Treat __start as the anchor for dead code stripping */
EXTERN(_vectors) /* Force the vectors to be included in the output */
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > progmem
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > progmem
.ARM.extab : {
*(.ARM.extab*)
} > progmem
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > progmem
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
. = ALIGN(4);
_edata = ABSOLUTE(.);
} > datamem AT > progmem
.bss : { /* BSS */
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > datamem
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}