nuttx/boards/arm/lpc54xx/lpcxpresso-lpc54628/scripts/flash.ld

104 lines
3.1 KiB
Plaintext
Raw Normal View History

This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
/****************************************************************************
* boards/arm/lpc54xx/lpcxpresso-lpc54628/scripts/flash.ld
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
*
* http://www.apache.org/licenses/LICENSE-2.0
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
*
****************************************************************************/
/* The LPC54628 on the LPCXPresso has 512Kb of FLASH at address 0x0000:0000.
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
* The Main SRAM is comprised of up to a total 160 KB of contiguous, on-chip
* static RAM memory beginning at address 0x2000:0000 (this is in addition
* to SRAMX aso the total device SRAM can be up to 200 KB).
*/
MEMORY
{
progmem (rx) : ORIGIN = 0x00000000, LENGTH = 512K
datamem (rwx) : ORIGIN = 0x20000000, LENGTH = 160K
}
OUTPUT_ARCH(arm)
ENTRY(__start) /* Treat __start as the anchor for dead code stripping */
EXTERN(_vectors) /* Force the vectors to be included in the output */
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > progmem
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > progmem
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
.ARM.extab : {
*(.ARM.extab*)
} > progmem
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > progmem
__exidx_end = ABSOLUTE(.);
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
_eronly = ABSOLUTE(.);
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
. = ALIGN(4);
_edata = ABSOLUTE(.);
} > datamem AT > progmem
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > datamem
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
}