nuttx/tools/LibTargets.mk

223 lines
8.7 KiB
Makefile
Raw Normal View History

############################################################################
# tools/LibTargets.mk
#
symtab/, tools/: NuttX provides lists of available syscalls and library functions and tools to process them. The lists can be used to build symbol table which allows runtime program loading which can reuse functions already compiled into NuttX system image. List processing, compilation and linking to the final system image has been possible only under manual control until now. Provided changes add option (CONFIG_EXECFUNCS_GENERATE_SYSTEM_SYMTAB) to build complete list of available functions and syscalls automatically. The symbolic table is generated in form libsymtab.a which can be reused by application or directly pull in when "g_symtab" and "g_nsymbols" variables are requested by EXECFUNCS configuration. I have tried to follow mechanisms for library compilation in different kernel protection modes but tested only flat no-MMU build. The basic assumption is that this library and libraries providing syscall stubs and C-library functions are available in user-space context and initial application (usually NSH) registers the symbol table through IOCTL. The table can be reused then by another applications in their address space as kernel allows. Simple for flat or protected mode, I am not sure if really support in MMU mode. It is highly probable that I have made some mistake, overlooked something, but functionality is optional (should not cause troubles in any mode if disabled) and main purpose is to lower memory overhead when more applications are loaded on memory constrained system which usually use direct kernel calling without protection or address space separation. If the table should be provided by kernel to applications then makefiles has to be adjusted.
2019-08-13 17:09:43 +02:00
# Copyright (C) 2007-2012, 2014, 2019 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Archive targets. The target build sequence will first create a series of
# libraries, one per configured source file directory. The final NuttX
# execution will then be built from those libraries. The following targets
# build those libraries.
#
# Possible kernel-mode builds
libs$(DELIM)libc$(DELIM)libkc$(LIBEXT): pass2dep
$(Q) $(MAKE) -C libs$(DELIM)libc TOPDIR="$(TOPDIR)" libkc$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libkc$(LIBEXT): libs$(DELIM)libc$(DELIM)libkc$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
libs$(DELIM)libnx$(DELIM)libknx$(LIBEXT): pass2dep
$(Q) $(MAKE) -C libs$(DELIM)libnx TOPDIR="$(TOPDIR)" libknx$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libknx$(LIBEXT): libs$(DELIM)libnx$(DELIM)libknx$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
mm$(DELIM)libkmm$(LIBEXT): pass2dep
$(Q) $(MAKE) -C mm TOPDIR="$(TOPDIR)" libkmm$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libkmm$(LIBEXT): mm$(DELIM)libkmm$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
$(ARCH_SRC)$(DELIM)libkarch$(LIBEXT): pass2dep
$(Q) $(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" libkarch$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libkarch$(LIBEXT): $(ARCH_SRC)$(DELIM)libkarch$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
pass1$(DELIM)libpass1$(LIBEXT): pass2dep
$(Q) $(MAKE) -C pass1 TOPDIR="$(TOPDIR)" libpass1$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libpass1$(LIBEXT): pass1$(DELIM)libpass1$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
sched$(DELIM)libsched$(LIBEXT): pass2dep
$(Q) $(MAKE) -C sched TOPDIR="$(TOPDIR)" libsched$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libsched$(LIBEXT): sched$(DELIM)libsched$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
net$(DELIM)libnet$(LIBEXT): pass2dep
$(Q) $(MAKE) -C net TOPDIR="$(TOPDIR)" libnet$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libnet$(LIBEXT): net$(DELIM)libnet$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
boards$(DELIM)libboards$(LIBEXT): pass2dep
$(Q) $(MAKE) -C boards TOPDIR="$(TOPDIR)" libboards$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
staging$(DELIM)libboards$(LIBEXT): boards$(DELIM)libboards$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
crypto$(DELIM)libcrypto$(LIBEXT): pass2dep
$(Q) $(MAKE) -C crypto TOPDIR="$(TOPDIR)" libcrypto$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libcrypto$(LIBEXT): crypto$(DELIM)libcrypto$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
fs$(DELIM)libfs$(LIBEXT): pass2dep
$(Q) $(MAKE) -C fs TOPDIR="$(TOPDIR)" libfs$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libfs$(LIBEXT): fs$(DELIM)libfs$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
drivers$(DELIM)libdrivers$(LIBEXT): pass2dep
$(Q) $(MAKE) -C drivers TOPDIR="$(TOPDIR)" libdrivers$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libdrivers$(LIBEXT): drivers$(DELIM)libdrivers$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
binfmt$(DELIM)libbinfmt$(LIBEXT): pass2dep
$(Q) $(MAKE) -C binfmt TOPDIR="$(TOPDIR)" libbinfmt$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libbinfmt$(LIBEXT): binfmt$(DELIM)libbinfmt$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
graphics$(DELIM)libgraphics$(LIBEXT): pass2dep
$(Q) $(MAKE) -C graphics TOPDIR="$(TOPDIR)" libgraphics$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libgraphics$(LIBEXT): graphics$(DELIM)libgraphics$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
audio$(DELIM)libaudio$(LIBEXT): pass2dep
$(Q) $(MAKE) -C audio TOPDIR="$(TOPDIR)" libaudio$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libaudio$(LIBEXT): audio$(DELIM)libaudio$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
video$(DELIM)libvideo$(LIBEXT): pass2dep
$(Q) $(MAKE) -C video TOPDIR="$(TOPDIR)" libvideo$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libvideo$(LIBEXT): video$(DELIM)libvideo$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
wireless$(DELIM)libwireless$(LIBEXT): pass2dep
$(Q) $(MAKE) -C wireless TOPDIR="$(TOPDIR)" libwireless$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
2016-02-27 00:07:04 +01:00
staging$(DELIM)libwireless$(LIBEXT): wireless$(DELIM)libwireless$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
2016-02-27 00:07:04 +01:00
openamp$(DELIM)libopenamp$(LIBEXT): pass2dep
$(Q) $(MAKE) -C openamp TOPDIR="$(TOPDIR)" libopenamp$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
staging$(DELIM)libopenamp$(LIBEXT): openamp$(DELIM)libopenamp$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
syscall$(DELIM)libstubs$(LIBEXT): pass2dep
$(Q) $(MAKE) -C syscall TOPDIR="$(TOPDIR)" libstubs$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libstubs$(LIBEXT): syscall$(DELIM)libstubs$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
# Special case
ifeq ($(CONFIG_BUILD_FLAT),y)
$(ARCH_SRC)$(DELIM)libarch$(LIBEXT): pass2dep
$(Q) $(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" libarch$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
else
$(ARCH_SRC)$(DELIM)libarch$(LIBEXT): pass1dep
$(Q) $(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" libarch$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
endif
staging$(DELIM)libarch$(LIBEXT): $(ARCH_SRC)$(DELIM)libarch$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
# Possible user-mode builds
ifeq ($(CONFIG_BUILD_FLAT),y)
libs$(DELIM)libc$(DELIM)libc$(LIBEXT): pass2dep
else
libs$(DELIM)libc$(DELIM)libc$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C libs$(DELIM)libc TOPDIR="$(TOPDIR)" libc$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libc$(LIBEXT): libs$(DELIM)libc$(DELIM)libc$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
ifeq ($(CONFIG_BUILD_FLAT),y)
libs$(DELIM)libnx$(DELIM)libnx$(LIBEXT): pass2dep
else
libs$(DELIM)libnx$(DELIM)libnx$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C libs$(DELIM)libnx TOPDIR="$(TOPDIR)" libnx$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libnx$(LIBEXT): libs$(DELIM)libnx$(DELIM)libnx$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
ifeq ($(CONFIG_BUILD_FLAT),y)
mm$(DELIM)libmm$(LIBEXT): pass2dep
else
mm$(DELIM)libmm$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C mm TOPDIR="$(TOPDIR)" libmm$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libmm$(LIBEXT): mm$(DELIM)libmm$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
libs$(DELIM)libxx$(DELIM)libxx$(LIBEXT): pass1dep
$(Q) $(MAKE) -C libs$(DELIM)libxx TOPDIR="$(TOPDIR)" libxx$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libxx$(LIBEXT): libs$(DELIM)libxx$(DELIM)libxx$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
libs$(DELIM)libdsp$(DELIM)libdsp$(LIBEXT): pass2dep
$(Q) $(MAKE) -C libs$(DELIM)libdsp TOPDIR="$(TOPDIR)" libdsp$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libdsp$(LIBEXT): libs$(DELIM)libdsp$(DELIM)libdsp$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
ifeq ($(CONFIG_BUILD_FLAT),y)
$(APPDIR)$(DELIM)libapps$(LIBEXT): pass2dep
else
$(APPDIR)$(DELIM)libapps$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C $(APPDIR) TOPDIR="$(TOPDIR)" EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libapps$(LIBEXT): $(APPDIR)$(DELIM)libapps$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
syscall$(DELIM)libproxies$(LIBEXT): pass1dep
$(Q) $(MAKE) -C syscall TOPDIR="$(TOPDIR)" libproxies$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libproxies$(LIBEXT): syscall$(DELIM)libproxies$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)