nuttx/fs/nxffs/nxffs_reformat.c

/****************************************************************************
 * fs/nxffs/nxffs_reformat.c
 *
 *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 *
 * References: Linux/Documentation/filesystems/romfs.txt
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <string.h>
#include <errno.h>
#include <debug.h>

#include <nuttx/mtd.h>

#include "nxffs.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Types
 ****************************************************************************/

/****************************************************************************
 * Public Variables
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nxffs_format
 *
 * Description:
 *   Erase and reformat the entire volume.
 *
 * Input Parameters:
 *   volume - Describes the NXFFS volume to be reformatted.
 *
 * Returned Value:
 *   Zero on success or a negated errno on a failure.  Failures will be
 *   returned n the case of MTD reported failures o.
 *   Nothing in the volume data itself will generate errors.
 *
 ****************************************************************************/

static int nxffs_format(FAR struct nxffs_volume_s *volume)
{
  FAR uint8_t *blkptr;   /* Pointer to next block data */
  off_t eblock;          /* Erase block number */
  off_t lblock;          /* Logical block number */
  ssize_t nxfrd;         /* Number of blocks transferred */
  int i;
  int ret;

  /* Create an image of one properly formatted erase sector */

  memset(volume->pack, CONFIG_NXFFS_ERASEDSTATE, volume->geo.erasesize);
  for (blkptr = volume->pack, i = 0;
       i < volume->blkper;
       blkptr += volume->geo.blocksize, i++)
    {
      FAR struct nxffs_block_s *blkhdr = (FAR struct nxffs_block_s*)blkptr;
      memcpy(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE);
      blkhdr->state = BLOCK_STATE_GOOD;
    }

  /* Erase and format each erase block */

  for (eblock = 0; eblock < volume->geo.neraseblocks; eblock++)
    {
      /* Erase the block */

      ret = MTD_ERASE(volume->mtd, eblock, 1);
      if (ret < 0)
        {
          fdbg("Erase block %d failed: %d\n", eblock, ret);
          return ret;
        }

      /* Write the formatted image to the erase block */

      lblock = eblock * volume->blkper;
      nxfrd = MTD_BWRITE(volume->mtd, lblock, volume->blkper, volume->pack);
      if (nxfrd != volume->blkper)
        {
          fdbg("Write erase block %d failed: %d\n", lblock, nxfrd);
          return -EIO;
        }
    }

  return OK;
}

/****************************************************************************
 * Name: nxffs_badblocks
 *
 * Description:
 *   Verify each block and mark improperly erased blocks as bad.
 *
 * Input Parameters:
 *   volume - Describes the NXFFS volume to be reformatted.
 *
 * Returned Value:
 *   Zero on success or a negated errno on a failure.  Failures will be
 *   returned n the case of MTD reported failures o.
 *   Nothing in the volume data itself will generate errors.
 *
 ****************************************************************************/

static int nxffs_badblocks(FAR struct nxffs_volume_s *volume)
{
  FAR uint8_t *blkptr;   /* Pointer to next block data */
  off_t eblock;          /* Erase block number */
  off_t lblock;          /* Logical block number */
  ssize_t nxfrd;         /* Number of blocks transferred */
  bool good;             /* TRUE: block is good */
  bool modified;         /* TRUE: The erase block has been modified */
  int i;

  /* Read and verify each erase block */

  for (eblock = 0; eblock < volume->geo.neraseblocks; eblock++)
    {
      /* Read the entire erase block */

      lblock = eblock * volume->blkper;
      nxfrd  = MTD_BREAD(volume->mtd, lblock, volume->blkper, volume->pack);
      if (nxfrd != volume->blkper)
        {
          fdbg("Read erase block %d failed: %d\n", lblock, nxfrd);
          return -EIO;
        }

      /* Process each logical block */

      modified = false;
      for (blkptr = volume->pack, i = 0;
           i < volume->blkper;
           blkptr += volume->geo.blocksize, i++)
        {
          FAR struct nxffs_block_s *blkhdr = (FAR struct nxffs_block_s*)blkptr;

          /* Check block header */

          good = true;
          if (memcmp(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE) != 0 ||
              blkhdr->state != BLOCK_STATE_GOOD)
            {
              good = false;
            }

          /* Check that block data is erased */

          else
            {
              size_t blocksize = volume->geo.blocksize - SIZEOF_NXFFS_BLOCK_HDR;
              size_t erasesize = nxffs_erased(&blkptr[SIZEOF_NXFFS_BLOCK_HDR], blocksize);
              good = (blocksize == erasesize);
            }

          /* If the block is bad, attempt to re-write the block header indicating
           * a bad block (of course, if the block has failed, this may not be
           * possible, depending upon failure modes.
           */

          if (!good)
            {
              memcpy(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE);
              blkhdr->state = BLOCK_STATE_BAD;
              modified = true;
            }
        }

      /* If the erase block was modified, then re-write it */

      nxfrd = MTD_BWRITE(volume->mtd, lblock, volume->blkper, volume->pack);
      if (nxfrd != volume->blkper)
        {
          fdbg("Write erase block %d failed: %d\n", lblock, nxfrd);
          return -EIO;
        }
    }

  return OK;
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nxffs_reformat
 *
 * Description:
 *   Erase and reformat the entire volume.  Verify each block and mark
 *   improperly erased blocks as bad.
 *
 * Input Parameters:
 *   volume - Describes the NXFFS volume to be reformatted.
 *
 * Returned Value:
 *   Zero on success or a negated errno on a failure.  Failures will be
 *   returned n the case of MTD reported failures o.
 *   Nothing in the volume data itself will generate errors.
 *
 ****************************************************************************/

int nxffs_reformat(FAR struct nxffs_volume_s *volume)
{
  int ret;

  /* Erase and reformat the entire volume */

  ret = nxffs_format(volume);
  if (ret < 0)
    {
      fdbg("Failed to reformat the volume: %d\n", -ret);
      return ret;
    }

  /* Check for bad blocks */

  ret = nxffs_badblocks(volume);
  if (ret < 0)
    {
      fdbg("Bad block check failed: %d\n", -ret);
    }
  return ret;
}