nuttx/boards/arm/stm32l4/nucleo-l476rg/src/stm32_userleds.c

215 lines
6.5 KiB
C
Raw Normal View History

2016-03-10 18:21:35 +01:00
/****************************************************************************
* boards/arm/stm32l4/nucleo-l476rg/src/stm32_userleds.c
2016-03-10 18:21:35 +01:00
*
* Copyright (C) 2014-2016 Gregory Nutt. All rights reserved.
2016-03-10 18:21:35 +01:00
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/power/pm.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32l4.h"
#include "nucleo-l476rg.h"
#ifndef CONFIG_ARCH_LEDS
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* LED Power Management */
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate);
static int led_pm_prepare(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate);
2016-03-10 18:21:35 +01:00
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_PM
static struct pm_callback_s g_ledscb =
{
.notify = led_pm_notify,
.prepare = led_pm_prepare,
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: led_pm_notify
*
* Description:
* Notify the driver of new power state. This callback is called after
* all drivers have had the opportunity to prepare for the new power state.
*
****************************************************************************/
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate)
2016-03-10 18:21:35 +01:00
{
switch (pmstate)
{
case(PM_NORMAL):
{
/* Restore normal LEDs operation */
}
break;
case(PM_IDLE):
{
/* Entering IDLE mode - Turn leds off */
}
break;
case(PM_STANDBY):
{
/* Entering STANDBY mode - Logic for PM_STANDBY goes here */
}
break;
case(PM_SLEEP):
{
/* Entering SLEEP mode - Logic for PM_SLEEP goes here */
}
break;
default:
{
/* Should not get here */
}
break;
}
}
#endif
/****************************************************************************
* Name: led_pm_prepare
*
* Description:
* Request the driver to prepare for a new power state. This is a warning
* that the system is about to enter into a new power state. The driver
* should begin whatever operations that may be required to enter power
* state. The driver may abort the state change mode by returning a
* non-zero value from the callback function.
*
****************************************************************************/
#ifdef CONFIG_PM
static int led_pm_prepare(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate)
2016-03-10 18:21:35 +01:00
{
/* No preparation to change power modes is required by the LEDs driver.
* We always accept the state change by returning OK.
*/
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_userled_initialize
****************************************************************************/
void board_userled_initialize(void)
{
/* Configure LD2 GPIO for output */
stm32l4_configgpio(GPIO_LD2);
2016-03-10 18:21:35 +01:00
}
/****************************************************************************
* Name: board_userled
****************************************************************************/
void board_userled(int led, bool ledon)
{
if (led == BOARD_LD2)
2016-03-10 18:21:35 +01:00
{
stm32l4_gpiowrite(GPIO_LD2, ledon);
2016-03-10 18:21:35 +01:00
}
}
/****************************************************************************
* Name: board_userled_all
****************************************************************************/
void board_userled_all(uint8_t ledset)
{
stm32l4_gpiowrite(GPIO_LD2, (ledset & BOARD_LD2_BIT) != 0);
2016-03-10 18:21:35 +01:00
}
/****************************************************************************
* Name: stm32l4_led_pminitialize
2016-03-10 18:21:35 +01:00
****************************************************************************/
#ifdef CONFIG_PM
void stm32l4_led_pminitialize(void)
2016-03-10 18:21:35 +01:00
{
/* Register to receive power management callbacks */
int ret = pm_register(&g_ledscb);
DEBUGASSERT(ret == OK);
UNUSED(ret);
}
#endif /* CONFIG_PM */
#endif /* !CONFIG_ARCH_LEDS */