nuttx/configs/same70-xplained/mrf24j40-starhub/defconfig

134 lines
3.4 KiB
Plaintext
Raw Normal View History

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_ARCH_RAMFUNCS is not set
# CONFIG_NET_IPv4 is not set
# CONFIG_NSH_DISABLE_DATE is not set
# CONFIG_SAMV7_UART0 is not set
# CONFIG_SAMV7_UART2 is not set
# CONFIG_SAMV7_UART4 is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="same70-xplained"
CONFIG_ARCH_BOARD_SAME70_XPLAINED=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP_SAME70=y
CONFIG_ARCH_CHIP_SAME70Q21=y
CONFIG_ARCH_CHIP_SAME70Q=y
CONFIG_ARCH_CHIP_SAMV7=y
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_LAZYFPU=y
CONFIG_AT24XX_ADDR=0x57
CONFIG_AT24XX_EXTENDED=y
CONFIG_AT24XX_EXTSIZE=160
CONFIG_AT24XX_SIZE=2
CONFIG_BOARD_LOOPSPERMSEC=51262
CONFIG_BUILTIN=y
CONFIG_DRIVERS_IEEE802154=y
CONFIG_DRIVERS_WIRELESS=y
CONFIG_ETH0_PHY_KSZ8061=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_HOST_WINDOWS=y
CONFIG_IEEE802154_I8SAK=y
CONFIG_IEEE802154_MAC=y
CONFIG_IEEE802154_MACDEV=y
CONFIG_IEEE802154_MRF24J40=y
CONFIG_IEEE802154_NETDEV=y
CONFIG_INTELHEX_BINARY=y
CONFIG_IOB_BUFSIZE=128
CONFIG_IOB_NBUFFERS=32
CONFIG_IOB_NCHAINS=16
CONFIG_LIB_HOSTNAME="MRF24J40-Hub"
CONFIG_MAC802154_NTXDESC=32
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_MTD=y
CONFIG_MTD_AT24XX=y
CONFIG_MTD_AT25=y
CONFIG_MTD_CONFIG=y
CONFIG_NET=y
CONFIG_NETDB_DNSCLIENT=y
CONFIG_NETDB_DNSSERVER_NOADDR=y
CONFIG_NETDEV_PHY_IOCTL=y
CONFIG_NETDEV_STATISTICS=y
CONFIG_NETDEV_WIRELESS_IOCTL=y
CONFIG_NETINIT_MACADDR=0x00fade00deadbeef
CONFIG_NETINIT_NOMAC=y
CONFIG_NETUTILS_TELNETD=y
CONFIG_NETUTILS_WEBCLIENT=y
CONFIG_NET_6LOWPAN=y
CONFIG_NET_BROADCAST=y
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE. This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU. The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's. Squashed commit of the following: Trivial update to fix some spacing issues. net/: Rename several macros containing _MTU to _PKTSIZE. net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
2018-07-04 22:10:40 +02:00
CONFIG_NET_ETH_PKTSIZE=590
CONFIG_NET_ICMPv6=y
CONFIG_NET_ICMPv6_NEIGHBOR=y
CONFIG_NET_ICMPv6_SOCKET=y
CONFIG_NET_IPv6=y
CONFIG_NET_STAR=y
CONFIG_NET_STARHUB=y
CONFIG_NET_STATISTICS=y
CONFIG_NET_TCP=y
CONFIG_NET_TCPBACKLOG=y
CONFIG_NET_TCP_WRITE_BUFFERS=y
CONFIG_NET_UDP=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_DISABLE_GET=y
CONFIG_NSH_DISABLE_PUT=y
CONFIG_NSH_DISABLE_WGET=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=393216
CONFIG_RAM_START=0x20400000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SAME70XPLAINED_CLICKSHIELD=y
CONFIG_SAMV7_EMAC0=y
CONFIG_SAMV7_EMAC0_PHYSR=30
CONFIG_SAMV7_EMAC0_PHYSR_100FD=0x6
CONFIG_SAMV7_EMAC0_PHYSR_100HD=0x2
CONFIG_SAMV7_EMAC0_PHYSR_10FD=0x5
CONFIG_SAMV7_EMAC0_PHYSR_10HD=0x1
CONFIG_SAMV7_EMAC0_PHYSR_ALTCONFIG=y
CONFIG_SAMV7_EMAC0_PHYSR_ALTMODE=0x7
CONFIG_SAMV7_EMAC0_RMII=y
CONFIG_SAMV7_GPIOA_IRQ=y
CONFIG_SAMV7_GPIOC_IRQ=y
CONFIG_SAMV7_GPIO_IRQ=y
CONFIG_SAMV7_SPI0=y
CONFIG_SAMV7_UART3=y
CONFIG_SAMV7_XDMAC=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=160
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_START_DAY=16
CONFIG_START_MONTH=8
CONFIG_SYSLOG_BUFFER=y
CONFIG_SYSLOG_INTBUFFER=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
CONFIG_SYSTEM_PING6=y
CONFIG_SYSTEM_TELNET_CLIENT=y
CONFIG_UART3_SERIAL_CONSOLE=y
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WIRELESS=y
CONFIG_WIRELESS_IEEE802154=y