sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
f49fa466b6
nuttx/boards/arm/cxd56xx/common/CMakeLists.txt

184 lines
4.3 KiB
CMake
Raw Normal View History

build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
# ##############################################################################
# boards/arm/cxd56xx/common/CMakeLists.txt
#
# Licensed to the Apache Software Foundation (ASF) under one or more contributor
# license agreements. See the NOTICE file distributed with this work for
# additional information regarding copyright ownership. The ASF licenses this
# file to you under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
#
# ##############################################################################
if(CONFIG_ARCH_BOARD_COMMON)
set(SRCS)
list(APPEND SRCS src/cxd56_boot.c)
boards: cxd56xx: Fix duplicate make target Remove a build warning by target 'cxd56_audio.o' given more than once in the same rule.
2023-08-05 07:21:55 +02:00
if(CONFIG_AUDIO_CXD56 OR CONFIG_CXD56_AUDIO)
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
list(APPEND SRCS src/cxd56_audio.c)
endif()
if(CONFIG_MODEM_ALTMDM)
list(APPEND SRCS src/cxd56_altmdm.c)
endif()
if(CONFIG_BOARDCTL_UNIQUEID)
list(APPEND SRCS src/cxd56_uid.c)
endif()
if(CONFIG_CXD56_BACKUPLOG)
list(APPEND SRCS src/cxd56_crashdump.c)
endif()
if(CONFIG_SENSORS)
list(APPEND SRCS src/cxd56_sensors.c)
endif()
if(CONFIG_SENSORS_AK09912)
list(APPEND SRCS src/cxd56_ak09912_i2c.c)
endif()
if(CONFIG_SENSORS_AK09912_SCU)
list(APPEND SRCS src/cxd56_ak09912_scu.c)
endif()
if(CONFIG_SENSORS_APDS9930_SCU)
list(APPEND SRCS src/cxd56_apds9930_scu.c)
endif()
if(CONFIG_SENSORS_APDS9960)
list(APPEND SRCS src/cxd56_apds9960_i2c.c)
endif()
if(CONFIG_SENSORS_BH1721FVC_SCU)
list(APPEND SRCS src/cxd56_bh1721fvc_scu.c)
endif()
if(CONFIG_SENSORS_BH1745NUC_SCU)
list(APPEND SRCS src/cxd56_bh1745nuc_scu.c)
endif()
if(CONFIG_SENSORS_BM1383GLV_SCU)
list(APPEND SRCS src/cxd56_bm1383glv_scu.c)
endif()
if(CONFIG_SENSORS_BM1422GMV_SCU)
list(APPEND SRCS src/cxd56_bm1422gmv_scu.c)
endif()
if(CONFIG_SENSORS_BMI160_I2C)
list(APPEND SRCS src/cxd56_bmi160_i2c.c)
endif()
boards: cxd56xx: Add board-specific driver for bmi270
2023-08-29 12:49:52 +02:00
if(CONFIG_SENSORS_BMI270_I2C)
list(APPEND SRCS src/cxd56_bmi270_i2c.c)
endif()
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
if(CONFIG_SENSORS_BMI160_SCU)
list(APPEND SRCS src/cxd56_bmi160_scu.c)
endif()
if(CONFIG_SENSORS_BMI160_SPI)
list(APPEND SRCS src/cxd56_bmi160_spi.c)
endif()
if(CONFIG_SENSORS_BMP280)
list(APPEND SRCS src/cxd56_bmp280_i2c.c)
endif()
if(CONFIG_SENSORS_BMP280_SCU)
list(APPEND SRCS src/cxd56_bmp280_scu.c)
endif()
if(CONFIG_SENSORS_KX022_SCU)
list(APPEND SRCS src/cxd56_kx022_scu.c)
endif()
if(CONFIG_SENSORS_LT1PA01_SCU)
list(APPEND SRCS src/cxd56_lt1pa01_scu.c)
endif()
if(CONFIG_SENSORS_RPR0521RS_SCU)
list(APPEND SRCS src/cxd56_rpr0521rs_scu.c)
endif()
if(CONFIG_SENSORS_SCD41)
list(APPEND SRCS src/cxd56_scd41_i2c.c)
endif()
if(CONFIG_NETDEVICES)
list(APPEND SRCS src/cxd56_netinit.c)
endif()
if(CONFIG_WL_GS2200M)
list(APPEND SRCS src/cxd56_gs2200m.c)
endif()
if(CONFIG_LCD_ILI9340)
list(APPEND SRCS src/cxd56_ili9340.c)
endif()
if(CONFIG_LCD_LPM013M091A)
list(APPEND SRCS src/cxd56_lpm013m091a.c)
endif()
if(CONFIG_CXD56_SFC)
list(APPEND SRCS src/cxd56_flash.c)
endif()
if(CONFIG_USBMSC)
list(APPEND SRCS src/cxd56_usbmsc.c)
endif()
if(CONFIG_CXD56_I2C_DRIVER)
list(APPEND SRCS src/cxd56_i2cdev.c)
endif()
if(CONFIG_I2C_BITBANG)
list(APPEND SRCS src/cxd56_i2cdev_bitbang.c)
endif()
if(CONFIG_CXD56_SPI_DRIVER)
list(APPEND SRCS src/cxd56_spidev.c)
endif()
if(CONFIG_VIDEO_ISX012)
list(APPEND SRCS src/cxd56_isx012.c)
endif()
if(CONFIG_VIDEO_ISX019)
list(APPEND SRCS src/cxd56_isx019.c)
endif()
if(CONFIG_CXD56_IMAGEPROC)
list(APPEND SRCS src/cxd56_imageproc.c)
endif()
if(CONFIG_BCM20706)
list(APPEND SRCS src/cxd56_bcm20706.c)
endif()
if(CONFIG_CXD56_EMMC)
list(APPEND SRCS src/cxd56_emmcdev.c)
endif()
if(CONFIG_CXD56_SPISD)
list(APPEND SRCS src/cxd56_spisd.c)
endif()
if(CONFIG_BOARD_USBDEV_SERIALSTR)
list(APPEND SRCS src/cxd56_usbdevserialstr.c)
endif()
target_sources(board PRIVATE ${SRCS})
endif()
Reference in New Issue Copy Permalink