nuttx/tools/Directories.mk

191 lines
4.7 KiB
Makefile
Raw Normal View History

############################################################################
# tools/Directories.mk
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
# Lists of build directories.
#
# CONTEXTDIRS include directories that have special, one-time pre-build
# requirements. Normally this includes things like auto-generation of
# configuration specific files or creation of configurable symbolic links
# CLEANDIRS are the directories that the clean target will executed in.
# These are all directories that we know about.
# CCLEANDIRS are directories that the clean_context target will execute in.
# The clean_context target "undoes" the actions of the context target.
# Only directories known to require cleaning are included.
# KERNDEPDIRS are the directories in which we will build target dependencies.
# If NuttX and applications are built separately (CONFIG_BUILD_PROTECTED or
# CONFIG_BUILD_KERNEL), then this holds only the directories containing
# kernel files.
# USERDEPDIRS. If NuttX and applications are built separately (CONFIG_BUILD_PROTECTED),
# then this holds only the directories containing user files. If
# CONFIG_BUILD_KERNEL is selected, then applications are not build at all.
CLEANDIRS :=
CCLEANDIRS := boards $(APPDIR) graphics
KERNDEPDIRS :=
USERDEPDIRS :=
# In the protected build, the applications in the apps/ directory will be
# into the userspace; in the flat build, the applications will be built into
# the kernel space. But in the kernel build, the applications will not be
# built at all by this Makefile.
ifeq ($(CONFIG_BUILD_PROTECTED),y)
USERDEPDIRS += $(APPDIR)
else ifneq ($(CONFIG_BUILD_KERNEL),y)
KERNDEPDIRS += $(APPDIR)
else
CLEANDIRS += $(APPDIR)
endif
KERNDEPDIRS += sched drivers boards $(ARCH_SRC)
KERNDEPDIRS += fs binfmt
ifeq ($(EXTERNALDIR),external)
KERNDEPDIRS += external
endif
CONTEXTDIRS = boards drivers fs $(APPDIR) $(ARCH_SRC)
CLEANDIRS += pass1
ifeq ($(CONFIG_BUILD_FLAT),y)
KERNDEPDIRS += libs$(DELIM)libc mm
ifeq ($(CONFIG_LIBM_TOOLCHAIN)$(CONFIG_LIBM_NONE),)
KERNDEPDIRS += libs$(DELIM)libm
else
CLEANDIRS += libs$(DELIM)libm
endif
ifeq ($(CONFIG_HAVE_CXX),y)
KERNDEPDIRS += libs$(DELIM)libxx
else
CLEANDIRS += libs$(DELIM)libxx
endif
else
USERDEPDIRS += libs$(DELIM)libc mm
ifeq ($(CONFIG_LIBM_TOOLCHAIN)$(CONFIG_LIBM_NONE),)
USERDEPDIRS += libs$(DELIM)libm
else
CLEANDIRS += libs$(DELIM)libm
endif
ifeq ($(CONFIG_HAVE_CXX),y)
USERDEPDIRS += libs$(DELIM)libxx
else
CLEANDIRS += libs$(DELIM)libxx
endif
endif
ifeq ($(CONFIG_LIB_SYSCALL),y)
CONTEXTDIRS += syscall
USERDEPDIRS += syscall
else
ifeq ($(CONFIG_SCHED_INSTRUMENTATION_SYSCALL),y)
CONTEXTDIRS += syscall
USERDEPDIRS += syscall
else
CLEANDIRS += syscall
endif
endif
CONTEXTDIRS += libs$(DELIM)libc
ifeq ($(CONFIG_LIBM_TOOLCHAIN)$(CONFIG_LIBM_NONE),)
CONTEXTDIRS += libs$(DELIM)libm
endif
ifeq ($(CONFIG_HAVE_CXX),y)
CONTEXTDIRS += libs$(DELIM)libxx
endif
2016-07-01 00:20:43 +02:00
ifeq ($(CONFIG_NX),y)
KERNDEPDIRS += graphics
CONTEXTDIRS += graphics
else
CLEANDIRS += graphics
endif
ifeq ($(CONFIG_NXFONTS),y)
ifeq ($(CONFIG_BUILD_FLAT),y)
KERNDEPDIRS += libs$(DELIM)libnx
else
USERDEPDIRS += libs$(DELIM)libnx
endif
CONTEXTDIRS += libs$(DELIM)libnx
else
CLEANDIRS += libs$(DELIM)libnx
endif
ifeq ($(CONFIG_AUDIO),y)
KERNDEPDIRS += audio
else
CLEANDIRS += audio
endif
ifeq ($(CONFIG_VIDEO),y)
KERNDEPDIRS += video
else
CLEANDIRS += video
endif
ifeq ($(CONFIG_WIRELESS),y)
KERNDEPDIRS += wireless
else
CLEANDIRS += wireless
endif
ifeq ($(CONFIG_LIBDSP),y)
KERNDEPDIRS += libs$(DELIM)libdsp
else
CLEANDIRS += libs$(DELIM)libdsp
endif
# Add networking directories to KERNDEPDIRS and CLEANDIRS
ifeq ($(CONFIG_NET),y)
KERNDEPDIRS += net
else
CLEANDIRS += net
endif
ifeq ($(CONFIG_CRYPTO),y)
KERNDEPDIRS += crypto
else
CLEANDIRS += crypto
endif
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
ifeq ($(CONFIG_OPENAMP),y)
KERNDEPDIRS += openamp
CONTEXTDIRS += openamp
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
else
CLEANDIRS += openamp
endif
ifeq ($(CONFIG_MM_TLSF_MANAGER),y)
CONTEXTDIRS += mm
endif
CLEANDIRS += $(KERNDEPDIRS) $(USERDEPDIRS)