nuttx/arch/arm/src/c5471/c5471_ethernet.c

/****************************************************************************
 * arch/arm/src/c5471/c5471_ethernet.c
 *
 *   Copyright (C) 2007, 2009-2010 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 *
 * Based one a C5471 Linux driver and released under this BSD license with
 * special permisson from the copyright holder of the Linux driver:
 * Todd Fischer, Cadenux, LLC.  Other references: "TMS320VC547x CPU and
 * Peripherals Reference Guide," TI document spru038.pdf.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>
#if defined(CONFIG_NET)

#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <time.h>
#include <string.h>
#include <debug.h>
#include <wdog.h>
#include <errno.h>

#include <nuttx/irq.h>
#include <nuttx/arch.h>

#include <net/ethernet.h>
#include <net/uip/uip.h>
#include <net/uip/uip-arp.h>
#include <net/uip/uip-arch.h>

#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Configuration ************************************************************/
/* CONFIG_C5471_NET_NINTERFACES determines the number of physical interfaces
 * that will be supported.
 */

#ifndef CONFIG_C5471_NET_NINTERFACES
# define CONFIG_C5471_NET_NINTERFACES 1
#endif

/* CONFIG_C5471_NET_STATS will enabled collection of driver statistics.
 * Default is disabled.
 */

/* CONFIG_C5471_ETHERNET_PHY may be set to one of the following values to
 * select the PHY (or left undefined if there is no PHY)
 */

#ifndef ETHERNET_PHY_LU3X31T_T64
# define ETHERNET_PHY_LU3X31T_T64 1
#endif
#ifndef ETHERNET_PHY_AC101L
# define ETHERNET_PHY_AC101L 2
#endif

/* Mode of operation defaults to AUTONEGOTIATION */

#if defined(CONFIG_NET_C5471_AUTONEGOTIATION)
# undef CONFIG_NET_C5471_BASET100
# undef CONFIG_NET_C5471_BASET10
#elif defined(CONFIG_NET_C5471_BASET100)
# undef CONFIG_NET_C5471_AUTONEGOTIATION
# undef CONFIG_NET_C5471_BASET10
#elif defined(CONFIG_NET_C5471_BASET10)
# undef CONFIG_NET_C5471_AUTONEGOTIATION
# undef CONFIG_NET_C5471_BASET100
#else
# define CONFIG_NET_C5471_AUTONEGOTIATION 1
# undef CONFIG_NET_C5471_BASET100
# undef CONFIG_NET_C5471_BASET10
#endif

/* This should be disabled unless you are performing very low level debug */

#undef CONFIG_C5471_NET_DUMPBUFFER
//#define CONFIG_C5471_NET_DUMPBUFFER 1

/* Timing values ************************************************************/
/* TX poll deley = 1 seconds. CLK_TCK=number of clock ticks per second */

#define C5471_WDDELAY   (1*CLK_TCK)
#define C5471_POLLHSEC  (1*2)

/* TX timeout = 1 minute */

#define C5471_TXTIMEOUT (60*CLK_TCK)

/* Ethernet GPIO bit settings ***********************************************/

#define GPIO_CIO_MDIO         0x00004000
#define GPIO_IO_MDCLK         0x00008000

/* Ethernet interface bit settings ******************************************/

/* TX descriptor, word #0 */

#define EIM_TXDESC_OWN_HOST   0x80000000 /* Bit 15: Ownership bit */
#define EIM_TXDESC_OWN_ENET   0x00000000
#define EIM_TXDESC_WRAP_NEXT  0x40000000 /* Bit 14: Descriptor chain wrap */
#define EIM_TXDESC_WRAP_FIRST 0x00000000
#define EIM_TXDESC_FIF        0x20000000 /* Bit 13: First in frame */
#define EIM_TXDESC_LIF        0x10000000 /* Bit 12: Last in frame */
                                         /* Bits 8-11: Retry count status */
#define EIM_TXDESC_INTRE      0x00800000 /* Bit 7: TX_IRQ int enable */
#define EIM_TXDESC_STATUSMASK 0x007f0000 /* Bits 0-6: Status */
#define EIM_TXDESC_RETRYERROR 0x00400000 /*   Exceed retry error */
#define EIM_TXDESC_HEARTBEAT  0x00200000 /*   Heartbeat (SQE) */
#define EIM_TXDESC_LCOLLISON  0x00100000 /*   Late collision error */
#define EIM_TXDESC_COLLISION  0x00080000 /*   Collision */
#define EIM_TXDESC_CRCERROR   0x00040000 /*   CRC error */
#define EIM_TXDESC_UNDERRUN   0x00020000 /*   Underrun error */
#define EIM_TXDESC_LOC        0x00010000 /*   Loss of carrier */

/* Packet bytes value used for both TX and RX descriptors */

#define EIM_PACKET_BYTES      0x00000040

/* Count of descriptors */

#define NUM_DESC_TX           32
#define NUM_DESC_RX           64

/* TX descriptor, word #1 */
                                         /* Bit 15: reserved */
#define EIM_TXDESC_PADCRC     0x00004000 /* Bit 14: Enable padding small frames */
                                         /* Bits 11-13: reserved */
#define EIM_TXDESC_BYTEMASK   0x000007ff /* Bits 0-10: Descriptor byte count */

/* RX descriptor, word #0 */

#define EIM_RXDESC_OWN_HOST   0x80000000 /* Bit 15: Ownership bit */
#define EIM_RXDESC_OWN_ENET   0x00000000
#define EIM_RXDESC_WRAP_NEXT  0x40000000 /* Bit 14: Descriptor chain wrap */
#define EIM_RXDESC_WRAP_FIRST 0x00000000
#define EIM_RXDESC_FIF        0x20000000 /* Bit 13: First in frame */
#define EIM_RXDESC_LIF        0x10000000 /* Bit 12: Last in frame */
                                         /* Bits 8-11: reserved */
#define EIM_RXDESC_INTRE      0x00800000 /* Bit 7: RX_IRQ int enable */
#define EIM_RXDESC_STATUSMASK 0x007f0000 /* Bits 0-6: Status */
#define EIM_RXDESC_MISS       0x00400000 /*   Miss */
#define EIM_RXDESC_VLAN       0x00200000 /*   VLAN */
#define EIM_RXDESC_LFRAME     0x00100000 /*   Long frame error */
#define EIM_RXDESC_SFRAME     0x00080000 /*   Short frame error */
#define EIM_RXDESC_CRCERROR   0x00040000 /*   CRC error */
#define EIM_RXDESC_OVERRUN    0x00020000 /*   Overrun error */
#define EIM_RXDESC_ALIGN      0x00010000 /*   Non-octect align error */

#define EIM_RXDESC_PADCRC     0x00004000 /* Enable padding for small frames */

/* RX descriptor, word #1 */
                                         /* Bits 11-15: reserved */
#define EIM_RXDESC_BYTEMASK   0x000007ff /* Bits 0-10: Descriptor byte count */

/* EIM_CPU_FILTER bit settings */
                                         /* Bits 5-31: reserved */
#define EIM_FILTER_MACLA      0x00000010 /* Bit 4: Enable logical address+multicast filtering */
#define EIM_FILTER_LOGICAL    0x00000008 /* Bit 3: Enable ENET logical filtering */
#define EIM_FILTER_MULTICAST  0x00000004 /* Bit 2: Enable multicast filtering */
#define EIM_FILTER_BROADCAST  0x00000002 /* Bit 1: Enable broadcast matching */
#define EIM_FILTER_UNICAST    0x00000001 /* Bit 0: Enable dest CPU address matching */

/* EIM_CTRL bit settings */
                                         /* Bits 16-31: Reserved */
#define EIM_CTRL_ESM_EN       0x00008000 /* Bit 15: Ethernet state machine enable */
                                         /* Bits 9-14: reserved */
#define EIM_CTRL_ENET0_EN     0x00000100 /* Bit 8: Enable routing of RX packets CPU->ENET0 */
                                         /* Bit 7: reserved */
#define EIM_CTRL_ENET0_FLW    0x00000040 /* Bit 6: Enable ENET0 flow control RX threshold */
#define EIM_CTRL_RXENET0_EN   0x00000020 /* Bit 5: Enable processing of ENET0 RX queue */
#define EIM_CTRL_TXENET0_EN   0x00000010 /* Bit 4: Enable processing of ENET0 TX queue */
                                         /* Bits 2-3: reserved */
#define EIM_CTRL_RXCPU_EN     0x00000002 /* Bit 1: Enable processing of CPU RX queue */
#define EIM_CTRL_TXCPU_EN     0x00000001 /* Bit 0: Enable processing of CPU TX queue */

/* EIM_STATUS bit settings */
                                         /* Bits 10-31: reserved */
#define EIM_STATUS_CPU_TXLIF  0x00000200 /* Bit 9: Last descriptor of TX packet filled */
#define EIM_STATUS_CPU_RXLIF  0x00000100 /* Bit 8: Last descriptor of RX queue processed */
#define EIM_STATUS_CPU_TX     0x00000080 /* Bit 7: Descriptor filled in TX queue */
#define EIM_STATUS_CPU_RX     0x00000040 /* Bit 6: Descriptor filled in RX queue */
                                         /* Bits 3-5: reserved */
#define EIM_STATUS_ENET0_ERR  0x00000004 /* Bit 2: ENET0 error interrupt */
#define EIM_STATUS_ENET0_TX   0x00000002 /* Bit 1: ENET0 TX interrupt */
#define EIM_STATUS_ENET0_RX   0x00000001 /* Bit 0" ENET0 RX interrupt */

/* EIM_INTEN bit settings */

#define EIM_INTEN_CPU_TXLIF  0x00000200 /* Bit 9: Last descriptor of TX packet filled */
#define EIM_INTEN_CPU_RXLIF  0x00000100 /* Bit 8: Last descriptor of RX queue processed */
#define EIM_INTEN_CPU_TX     0x00000080 /* Bit 7: Descriptor filled in TX queue */
#define EIM_INTEN_CPU_RX     0x00000040 /* Bit 6: Descriptor filled in RX queue */
                                         /* Bits 3-5: reserved */
#define EIM_INTEN_ENET0_ERR  0x00000004 /* Bit 2: ENET0 error interrupt */
#define EIM_INTEN_ENET0_TX   0x00000002 /* Bit 1: ENET0 TX interrupt */
#define EIM_INTEN_ENET0_RX   0x00000001 /* Bit 0: ENET0 RX interrupt */

/* ENET0_ADRMODE_EN bit settings */

#define ENET_ADR_PROMISCUOUS  0x00000008 /* Bit 3: Enable snoop address comparison */
#define ENET_ADR_BROADCAST    0x00000004 /* Bit 2: Enable broadcast address comparison */
#define ENET_ADDR_LCOMPARE    0x00000002 /* Bit 1: Enable logical address comparison */
#define ENET_ADDR_PCOMPARE    0x00000001 /* Bit 0: Enable physical address comparison */

/* ENET0_MODE bit settings */
                                         /* Bits 16-31: reserved */
#define ENET_MODO_FIFO_EN     0x00008000 /* Bit 15: Fifo enable */
                                         /* Bits 8-14: reserved */
#define ENET_MODE_RJCT_SFE    0x00000080 /* Bit 7: Reject short frames durig receive */
#define ENET_MODE_DPNET       0x00000040 /* Bit 6: Demand priority networkd vs CSMA/CD */
#define ENET_MODE_MWIDTH      0x00000020 /* Bit 5: Select nibble mode MII port */
#define ENET_MODE_WRAP        0x00000010 /* Bit 4: Internal MAC loopback */
#define ENET_MODE_FDWRAP      0x00000008 /* Bit 3: Full duplex wrap */
#define ENET_MODE_FULLDUPLEX  0x00000004 /* Bit 2: 1:Full duplex */
#define ENET_MODE_HALFDUPLEX  0x00000000 /*        0:Half duplex */
                                         /* Bit 1: reserved */
#define ENET_MODE_ENABLE      0x00000001 /* Bit 0: Port enable */

/* PHY registers */

#define MD_PHY_CONTROL_REG    0x00
#define MD_PHY_MSB_REG        0x02
#define MD_PHY_LSB_REG        0x03
#define MD_PHY_CTRL_STAT_REG  0x17

/*  Lucent LU3X31T-T64 transeiver ID */

#define LU3X31_T64_PHYID      0x00437421

/* PHY control register bit settings */

#define MODE_AUTONEG          0x1000
#define MODE_10MBIT_HALFDUP   0x0000
#define MODE_10MBIT_FULLDUP   0x0100
#define MODE_100MBIT_FULLDUP  0x2100
#define MODE_100MBIT_HALFDUP  0x2000

/* Inserts an ARM "nop" instruction */

#define nop() asm("    nop");

/* This is a helper pointer for accessing the contents of the Ethernet header */

#define BUF ((struct uip_eth_hdr *)c5471->c_dev.d_buf)

/****************************************************************************
 * Private Types
 ****************************************************************************/

/* The c5471_driver_s encapsulates all state information for a single c5471
 * hardware interface
 */

struct c5471_driver_s
{
  bool    c_bifup;           /* true:ifup false:ifdown */
  WDOG_ID c_txpoll;          /* TX poll timer */
  WDOG_ID c_txtimeout;       /* TX timeout timer */

  /* Note: According to the C547x documentation: "The software has to maintain
   * two pointers to the current RX-CPU and TX-CPU descriptors. At init time,
   * they have to be set to the first descriptors of each queue, and they have
   * to be incremented each time a descriptor ownership is give to the SWITCH".
   */

  volatile uint32_t c_txcpudesc;
  volatile uint32_t c_rxcpudesc;

  /* Last TX descriptor saved for error handling */

  uint32_t c_lastdescstart;
  uint32_t c_lastdescend;

  /* Shadowed registers */

  uint32_t c_eimstatus;

#ifdef CONFIG_C5471_NET_STATS
  /* TX statistics */

  uint32_t c_txpackets;      /* Number of packets sent */
  uint32_t c_txmiss;         /* Miss */
  uint32_t c_txvlan;         /* VLAN */
  uint32_t c_txlframe;       /* Long frame errors */
  uint32_t c_txsframe;       /* Short frame errors */
  uint32_t c_txcrc;          /* CRC errors */
  uint32_t c_txoverrun;      /* Overrun errors */
  uint32_t c_txalign;        /* Non-octect align errors */
  uint32_t c_txtimeouts;     /* TX timeouts */

  uint32_t c_rxpackets;      /* Number of packets received */
  uint32_t c_rxretries;      /* Exceed retry errors */
  uint32_t c_rxheartbeat;    /* Heartbeat (SQE) */
  uint32_t c_rxlcollision;   /* Late collision errors */
  uint32_t c_rxcollision;    /* Collision */
  uint32_t c_rxcrc;          /* CRC errors */
  uint32_t c_rxunderrun;     /* Underrun errors */
  uint32_t c_rxloc;          /* Loss of carrier */
  uint32_t c_rxdropped;      /* Packets dropped because of size */
#endif

  /* This holds the information visible to uIP/NuttX */

  struct uip_driver_s c_dev;  /* Interface understood by uIP */
};

/****************************************************************************
 * Private Data
 ****************************************************************************/

static struct c5471_driver_s g_c5471[CONFIG_C5471_NET_NINTERFACES];

/****************************************************************************
 * Private Function Prototypes
 ****************************************************************************/

/* Transceiver interface */

static void c5471_mdtxbit (int bit_state);
static int  c5471_mdrxbit (void);
static void c5471_mdwrite (int adr, int reg, int data);
static int  c5471_mdread (int adr, int reg);
static int  c5471_phyinit (void);

/* Support logic */

static inline void c5471_inctxcpu(struct c5471_driver_s *c5471);
static inline void c5471_incrxcpu(struct c5471_driver_s *c5471);

/* Common TX logic */

static int  c5471_transmit(struct c5471_driver_s *c5471);
static int  c5471_uiptxpoll(struct uip_driver_s *dev);

/* Interrupt handling */

#ifdef CONFIG_C5471_NET_STATS
static void c5471_rxstatus(struct c5471_driver_s *c5471);
#endif
static void c5471_receive(struct c5471_driver_s *c5471);
#ifdef CONFIG_C5471_NET_STATS
static void c5471_txstatus(struct c5471_driver_s *c5471);
#endif
static void c5471_txdone(struct c5471_driver_s *c5471);
static int  c5471_interrupt(int irq, FAR void *context);

/* Watchdog timer expirations */

static void c5471_polltimer(int argc, uint32_t arg, ...);
static void c5471_txtimeout(int argc, uint32_t arg, ...);

/* NuttX callback functions */

static int c5471_ifup(struct uip_driver_s *dev);
static int c5471_ifdown(struct uip_driver_s *dev);
static int c5471_txavail(struct uip_driver_s *dev);
#ifdef CONFIG_NET_IGMP
static int c5471_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
static int c5471_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac);
#endif

/* Initialization functions */

static void c5471_eimreset (struct c5471_driver_s *c5471);
static void c5471_eimconfig(struct c5471_driver_s *c5471);
static void c5471_reset(struct c5471_driver_s *c5471);
static void c5471_macassign(struct c5471_driver_s *c5471);

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: c5471_dumpbuffer
 *
 * Description
 *   Debug only
 *
 ****************************************************************************/

#ifdef CONFIG_C5471_NET_DUMPBUFFER
static inline void c5471_dumpbuffer(const char *msg, const uint8_t *buffer, unsigned int nbytes)
{
  /* CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and CONFIG_DEBUG_NET have to be
   * defined or the following does nothing.
   */
    
  nvdbgdumpbuffer(msg, buffer, nbytes);
}
#else
# define c5471_dumpbuffer(msg, buffer,nbytes)
#endif

/****************************************************************************
 * Name: c5471_mdtxbit
 *
 * Description
 *   A helper routine used when serially communicating with the c547X's
 *   external ethernet transeiver device. GPIO pins are connected to the
 *   transeiver's MDCLK and MDIO pins and are used to accomplish the serial
 *   comm.
 *
 *   protocol:
 *                      ___________
 *     MDCLK   ________/           \_
 *              ________:____
 *     MDIO    <________:____>--------
 *                      :
 *                      ^
 *              Pin state internalized
 *
 ****************************************************************************/

static void c5471_mdtxbit (int bit_state)
{
  /* Note: any non-zero "bit_state" supplied by the caller means we should clk a "1"
   * out the MDIO pin.
   */

  /* Config MDIO as output pin. */

  putreg32((getreg32(GPIO_CIO) & ~GPIO_CIO_MDIO), GPIO_CIO);

  /* Select the bit output state */

  if (bit_state)
    {
      /* set MDIO state high. */

      putreg32((getreg32(GPIO_IO) | GPIO_CIO_MDIO), GPIO_IO);
    }
  else
    {
      /* set MDIO state low. */

      putreg32((getreg32(GPIO_IO) & ~GPIO_CIO_MDIO), GPIO_IO);
    }

  nop();
  nop();
  nop();
  nop();

  /* MDCLK rising edge */

  putreg32((getreg32(GPIO_IO) | GPIO_IO_MDCLK), GPIO_IO);
  nop();
  nop();

  /* release MDIO */

  putreg32((getreg32(GPIO_CIO) | GPIO_CIO_MDIO), GPIO_CIO);
  nop();
  nop();

  /* MDCLK falling edge. */

  putreg32((getreg32(GPIO_IO) & ~GPIO_IO_MDCLK), GPIO_IO);
}

/****************************************************************************
 * Name: c5471_mdrxbit
 *
 * Description
 *    A helper routine used when serially communicating with the c547X's
 *    external ethernet transeiver device. GPIO pins are connected to the
 *    transeiver's MDCLK and MDIO pins and are used to accomplish the serial
 *    comm.
 *
 *    protocol:
 *                       ___________
 *       MDCLK  ________/           \_
 *              _______:_____
 *       MDIO   _______:_____>--------
 *                     :
 *                     ^
 *            pin state sample point
 *
 ****************************************************************************/

static int c5471_mdrxbit (void)
{
  register volatile uint32_t bit_state;

  /* config MDIO as input pin. */

  putreg32((getreg32(GPIO_CIO) | GPIO_CIO_MDIO), GPIO_CIO);

  /* Make sure the MDCLK is low */

  putreg32((getreg32(GPIO_IO) & ~GPIO_IO_MDCLK), GPIO_IO);
  nop();
  nop();
  nop();
  nop();

  /* Sample MDIO */

  bit_state = getreg32(GPIO_IO) & GPIO_CIO_MDIO;

  /* MDCLK rising edge */

  putreg32((getreg32(GPIO_IO) | GPIO_IO_MDCLK), GPIO_IO);
  nop();
  nop();
  nop();
  nop();

  /* MDCLK falling edge. */

  putreg32((getreg32(GPIO_IO)&~GPIO_IO_MDCLK), GPIO_IO); /* MDCLK falling edge */
  if (bit_state)
    {
      return 1;
    }
  else
    {
      return OK;
    }
}

/****************************************************************************
 * Name: c5471_mdwrite
 *
 * Description
 *    A helper routine used when serially communicating with the c547X's
 *    external ethernet transeiver device. GPIO pins are connected to the
 *    transeiver's MDCLK and MDIO pins and are used to accomplish the serial
 *    comm.
 *
 ****************************************************************************/

static void c5471_mdwrite (int adr, int reg, int data)
{
  int i;

  /* preamble: 11111111111111111111111111111111 */

  for (i = 0; i < 32; i++)
    {
      c5471_mdtxbit(1);
    }

  /* start of frame: 01 */

  c5471_mdtxbit(0);
  c5471_mdtxbit(1);

  /* operation code: 01 - write */

  c5471_mdtxbit(0);
  c5471_mdtxbit(1);

  /* PHY device address: AAAAA, msb first */

  for (i = 0; i < 5; i++)
    {
      c5471_mdtxbit(adr & 0x10);
      adr = adr << 1;
    }

  /* MII register address: RRRRR, msb first */

  for (i = 0; i < 5; i++)
    {
      c5471_mdtxbit(reg & 0x10);
      reg = reg << 1;
    }

  /* Turnaround time: ZZ */

  c5471_mdtxbit(1);
  c5471_mdtxbit(0);

  /* data: DDDDDDDDDDDDDDDD, msb first */

  for (i = 0; i < 16; i++)
    {
      c5471_mdtxbit(data & 0x8000);
      data = data << 1;
    }
}

/****************************************************************************
 * Name: c5471_mdread
 *
 * Description
 *    A helper routine used when serially communicating with the c547X's
 *    external ethernet transeiver device. GPIO pins are connected to the
 *    transeiver's MDCLK and MDIO pins and are used to accomplish the serial
 *    comm.
 *
 ****************************************************************************/

static int c5471_mdread (int adr, int reg)
{
  int i;
  int data = 0;

  /* preamble: 11111111111111111111111111111111 */

  for (i = 0; i < 32; i++)
    {
      c5471_mdtxbit(1);
    }

  /* start of frame: 01 */

  c5471_mdtxbit(0);
  c5471_mdtxbit(1);

  /* operation code: 10 - read */

  c5471_mdtxbit(1);
  c5471_mdtxbit(0);

  /* PHY device address: AAAAA, msb first */

  for (i = 0; i < 5; i++)
    {
      c5471_mdtxbit(adr & 0x10);
      adr = adr << 1;
    }

  /* MII register address: RRRRR, msb first */

  for (i = 0; i < 5; i++)
    {
      c5471_mdtxbit(reg & 0x10);
      reg = reg << 1;
    }

  /* turnaround time: ZZ */

  c5471_mdrxbit();
  c5471_mdrxbit(); /* PHY should drive a 0 */

  /* data: DDDDDDDDDDDDDDDD, msb first */

  for (i = 0; i < 16; i++)
    {
      data = data << 1;
      data |= c5471_mdrxbit();
    }

  return data;
}

/****************************************************************************
 * Name: c5471_phyinit
 *
 * Description
 *   The c547X EVM board uses a Lucent LU3X31T-T64 transeiver device to
 *   handle the physical layer (PHY). It's a h/w block that on the one end
 *   offers a Media Independent Interface (MII) which is connected to the
 *   Ethernet Interface Module (EIM) internal to the C547x and on the other
 *   end offers either the 10baseT or 100baseT electrical interface connecting
 *   to an RJ45 onboard network connector. The PHY transeiver has several
 *   internal registers allowing host configuration and status access. These
 *   internal registers are accessable by clocking serial data in/out of the
 *   MDIO pin of the LU3X31T-T64 chip. For c547X, the MDC and the MDIO pins
 *   are connected to the C547x GPIO15 and GPIO14 pins respectivley. Host
 *   software twiddles the GPIO pins appropriately to get data serially into
 *   and out of the chip. This is typically a one time operation at boot and
 *   normal operation of the transeiver involves EIM/Transeiver interaction at
 *   the other pins of the transeiver chip and doesn't require host intervention
 *   at the MDC and MDIO pins.
 *
 ****************************************************************************/

#if (CONFIG_C5471_ETHERNET_PHY == ETHERNET_PHY_LU3X31T_T64)
static int c5471_phyinit (void)
{
  int phyid;
  int status;

  /* Next, Setup GPIO pins to talk serially to the Lucent transeiver chip */

  /* enable gpio bits 15,14 */

  putreg32((getreg32(GPIO_EN) | 0x0000C000), GPIO_EN);

  /* config gpio(15); out -> MDCLK */

  putreg32((getreg32(GPIO_CIO) & ~0x00008000), GPIO_CIO);

  /* config gpio(14); in <- MDIO */

  putreg32((getreg32(GPIO_CIO) | 0x00004000), GPIO_CIO);

  /* initial pin state; MDCLK = 0 */

  putreg32((getreg32(GPIO_IO) & 0x000F3FFF), GPIO_IO);

  /* Next, request a chip reset */

  c5471_mdwrite(0, MD_PHY_CONTROL_REG, 0x8000); 
  while (c5471_mdread(0, MD_PHY_CONTROL_REG) & 0x8000)
    {
      /* wait for chip reset to complete */
    }

  /* Next, Read out the chip ID */

  phyid = (c5471_mdread(0, MD_PHY_MSB_REG) << 16) | c5471_mdread(0, MD_PHY_LSB_REG);
  if (phyid != LU3X31_T64_PHYID)
    {
      ndbg("Unrecognized PHY ID: %08x\n", phyid);
      return ERROR;
    }

  /* Next, Set desired network rate, 10BaseT, 100BaseT, or auto. */

#ifdef CONFIG_NET_C5471_AUTONEGOTIATION
  ndbg("Setting PHY Transceiver for Autonegotiation\n");
  c5471_mdwrite(0, MD_PHY_CONTROL_REG, MODE_AUTONEG);
#endif 
#ifdef CONFIG_NET_C5471_BASET100
  ndbg("Setting PHY Transceiver for 100BaseT FullDuplex\n");
  c5471_mdwrite(0, MD_PHY_CONTROL_REG, MODE_100MBIT_FULLDUP);
#endif 
#ifdef CONFIG_NET_C5471_BASET10
  ndbg("Setting PHY Transceiver for 10BaseT FullDuplex\n");
  c5471_mdwrite(0, MD_PHY_CONTROL_REG, MODE_10MBIT_FULLDUP);
#endif 

  status = c5471_mdread(0, MD_PHY_CTRL_STAT_REG);
  return status;
}

#elif (CONFIG_C5471_ETHERNET_PHY == ETHERNET_PHY_AC101L)

static int c5471_phyinit (void)
{
  int phyid;
  int status;

  /* Next, Setup GPIO pins to talk serially to the Lucent transeiver chip */

  putreg32((getreg32(GPIO_EN)  |  0x0000C000), GPIO_EN);   /* enable gpio bits 15,14 */
  putreg32((getreg32(GPIO_CIO) & ~0x00008000), GPIO_CIO); /* config gpio(15); out -> MDCLK */
  putreg32((getreg32(GPIO_CIO) |  0x00004000), GPIO_CIO);  /* config gpio(14); in <- MDIO */
  putreg32((getreg32(GPIO_IO)  &  0x000F3FFF), GPIO_IO);   /* initial pin state; MDCLK = 0 */

  return 1;
}

#else
#  define c5471_phyinit()
#  if defined(CONFIG_C5471_ETHERNET_PHY)
#    error "CONFIG_C5471_ETHERNET_PHY value not recognized"
#  else
#    warning "CONFIG_C5471_ETHERNET_PHY not defined -- assumed NO PHY"
#  endif
#endif

/****************************************************************************
 * Name: c5471_inctxcpu
 *
 * Description
 *
 ****************************************************************************/

static inline void c5471_inctxcpu(struct c5471_driver_s *c5471)
{
  if (EIM_TXDESC_WRAP_NEXT & getreg32(c5471->c_txcpudesc))
    {
      /* Loop back around to base of descriptor queue */

      c5471->c_txcpudesc = getreg32(EIM_CPU_TXBA) + EIM_RAM_START;
    }
  else
    {
      c5471->c_txcpudesc += 2*sizeof(uint32_t);
    }

  nvdbg("TX CPU desc: %08x\n", c5471->c_txcpudesc);
}

/****************************************************************************
 * Name: c5471_incrxcpu
 *
 * Description
 *
 ****************************************************************************/

static inline void c5471_incrxcpu(struct c5471_driver_s *c5471)
{
  if (EIM_RXDESC_WRAP_NEXT & getreg32(c5471->c_rxcpudesc))
    {
      /* Loop back around to base of descriptor queue */

      c5471->c_rxcpudesc = getreg32(EIM_CPU_RXBA) + EIM_RAM_START;
    }
  else
    {
      c5471->c_rxcpudesc += 2*sizeof(uint32_t);
    }

  nvdbg("RX CPU desc: %08x\n", c5471->c_rxcpudesc);
}

/****************************************************************************
 * Function: c5471_transmit
 *
 * Description:
 *   Start hardware transmission.  Called either from the txdone interrupt
 *   handling or from watchdog based polling.
 *
 * Parameters:
 *   c5471  - Reference to the driver state structure
 *
 * Returned Value:
 *   OK on success; a negated errno on failure
 *
 * Assumptions:
 *
 ****************************************************************************/

static int c5471_transmit(struct c5471_driver_s *c5471)
{
  struct uip_driver_s *dev = &c5471->c_dev;
  volatile uint16_t *packetmem;
  uint16_t framelen;
  bool bfirstframe;
  int nbytes;
  int nshorts;
  unsigned int i;
  unsigned int j;

  nbytes                 = (dev->d_len + 1) & ~1;
  j                      = 0;
  bfirstframe            = true;
  c5471->c_lastdescstart = c5471->c_rxcpudesc;

  nvdbg("Packet size: %d RX CPU desc: %08x\n", nbytes, c5471->c_rxcpudesc);
  c5471_dumpbuffer("Transmit packet", dev->d_buf, dev->d_len);

  while (nbytes)
    {
      /* Verify that the hardware is ready to send another packet */
      /* Words #0 and #1 of descriptor */

      while (EIM_TXDESC_OWN_HOST & getreg32(c5471->c_rxcpudesc))
       {
         /* Loop until the SWITCH lets go of the descriptor giving us access
          * rights to submit our new ether frame to it.
          */
       }

      if (bfirstframe)
        {
          putreg32((getreg32(c5471->c_rxcpudesc) | EIM_RXDESC_FIF), c5471->c_rxcpudesc);
        }
      else
        {
          putreg32((getreg32(c5471->c_rxcpudesc) & ~EIM_RXDESC_FIF), c5471->c_rxcpudesc);
        }

      putreg32((getreg32(c5471->c_rxcpudesc) & ~EIM_RXDESC_PADCRC), c5471->c_rxcpudesc);

      if (bfirstframe)
        {
          putreg32((getreg32(c5471->c_rxcpudesc) | EIM_RXDESC_PADCRC), c5471->c_rxcpudesc);
        }

      if (nbytes >= EIM_PACKET_BYTES)
        {
          framelen = EIM_PACKET_BYTES;
        }
      else
        {
          framelen = nbytes;
        }

      /* Submit ether frame bytes to the C5472 Ether Module packet memory space. */
      /* Get the number of 16-bit values to transfer by dividing by 2 with round up. */

      nshorts = (framelen + 1) >> 1;

      /* Words #2 and #3 of descriptor */

      packetmem = (uint16_t*)getreg32(c5471->c_rxcpudesc + sizeof(uint32_t));
      for (i = 0; i < nshorts; i++, j++)
        {
          /* 16-bits at a time. */

          packetmem[i] = htons(((uint16_t*)dev->d_buf)[j]);
        }

      putreg32(((getreg32(c5471->c_rxcpudesc) & ~EIM_RXDESC_BYTEMASK) | framelen), c5471->c_rxcpudesc);
      nbytes -= framelen;
      nvdbg("Wrote framelen: %d nbytes: %d nshorts: %d\n", framelen, nbytes, nshorts);

      if (0 == nbytes)
        {
          putreg32((getreg32(c5471->c_rxcpudesc) | EIM_RXDESC_LIF), c5471->c_rxcpudesc);
        }
      else
        {
          putreg32((getreg32(c5471->c_rxcpudesc) & ~EIM_RXDESC_LIF), c5471->c_rxcpudesc);
        }

      /* We're done with that descriptor; give access rights back to h/w */

      putreg32((getreg32(c5471->c_rxcpudesc) | EIM_RXDESC_OWN_HOST), c5471->c_rxcpudesc);

      /* Next, tell Ether Module that those submitted bytes are ready for the wire */

      putreg32(0x00000001, EIM_CPU_RXREADY);
      c5471->c_lastdescend = c5471->c_rxcpudesc;

      /* Advance to the next free descriptor */

      c5471_incrxcpu(c5471);
      bfirstframe = false;
    }

  /* Packet transferred .. Update statistics */

#ifdef CONFIG_C5471_NET_STATS
  c5471->c_txpackets++;
#endif

  /* Setup the TX timeout watchdog (perhaps restarting the timer) */

  (void)wd_start(c5471->c_txtimeout, C5471_TXTIMEOUT, c5471_txtimeout, 1, (uint32_t)c5471);
  return OK;
}

/****************************************************************************
 * Function: c5471_uiptxpoll
 *
 * Description:
 *   The transmitter is available, check if uIP has any outgoing packets ready
 *   to send.  This is a callback from uip_poll().  uip_poll() may be called:
 *
 *   1. When the preceding TX packet send is complete,
 *   2. When the preceding TX packet send timesout and the interface is reset
 *   3. During normal TX polling
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   OK on success; a negated errno on failure
 *
 * Assumptions:
 *
 ****************************************************************************/

static int c5471_uiptxpoll(struct uip_driver_s *dev)
{
  struct c5471_driver_s *c5471 = (struct c5471_driver_s *)dev->d_private;

  /* If the polling resulted in data that should be sent out on the network,
   * the field d_len is set to a value > 0.
   */

  if (c5471->c_dev.d_len > 0)
    {
      uip_arp_out(&c5471->c_dev);
      c5471_transmit(c5471);

      /* Check if the ESM has let go of the RX descriptor giving us access
       * rights to submit another Ethernet frame.
       */

      if ((EIM_TXDESC_OWN_HOST & getreg32(c5471->c_rxcpudesc)) != 0)
        {
          /* No, then return non-zero to terminate the poll */

          return 1;
        }
    }

  /* If zero is returned, the polling will continue until all connections have
   * been examined.
   */

  return 0;
}

/****************************************************************************
 * Function: c5471_rxstatus
 *
 * Description:
 *   An interrupt was received indicating that the last RX packet(s) is done
 *
 * Parameters:
 *   c5471  - Reference to the driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

#ifdef CONFIG_C5471_NET_STATS
static void c5471_rxstatus(struct c5471_driver_s *c5471)
{
  uint32_t desc = c5471->c_txcpudesc;
  uint32_t rxstatus;

  /* Walk that last packet we just received to collect xmit status bits. */

  rxstatus = 0;
  for (;;)
    {
      if (EIM_TXDESC_OWN_HOST & getreg32(desc))
        {
          /* The incoming packet queue is empty. */

          break;
        }

      rxstatus |= (getreg32(desc) & EIM_TXDESC_STATUSMASK);

      if ((getreg32(desc) & EIM_TXDESC_LIF) != 0)
        {
          break;
        }

      /* This packet is made up of several descriptors, find next one in chain. */

      if (EIM_TXDESC_WRAP_NEXT & getreg32(desc))
        {
          /* Loop back around to base of descriptor queue. */

          desc = getreg32(EIM_CPU_TXBA) + EIM_RAM_START;
        }
      else
        {
          desc += 2 * sizeof(uint32_t);
        }
    }

  if (rxstatus != 0)
    {
      if ((rxstatus & EIM_TXDESC_RETRYERROR) != 0)
        {
          c5471->c_rxretries++;
          nvdbg("c_rxretries: %d\n", c5471->c_rxretries);
        }

      if ((rxstatus & EIM_TXDESC_HEARTBEAT) != 0)
        {
          c5471->c_rxheartbeat++;
          nvdbg("c_rxheartbeat: %d\n", c5471->c_rxheartbeat);
        }

      if ((rxstatus & EIM_TXDESC_LCOLLISON) != 0)
        {
          c5471->c_rxlcollision++;
          nvdbg("c_rxlcollision: %d\n", c5471->c_rxlcollision);
        }

      if ((rxstatus & EIM_TXDESC_COLLISION) != 0)
        {
          c5471->c_rxcollision++;
          nvdbg("c_rxcollision: %d\n", c5471->c_rxcollision);
        }

      if ((rxstatus & EIM_TXDESC_CRCERROR) != 0)
        {
          c5471->c_rxcrc++;
          nvdbg("c_rxcrc: %d\n", c5471->c_rxcrc);
        }

      if ((rxstatus & EIM_TXDESC_UNDERRUN) != 0)
        {
          c5471->c_rxunderrun++;
          nvdbg("c_rxunderrun: %d\n", c5471->c_rxunderrun);
        }

      if ((rxstatus & EIM_TXDESC_LOC) != 0)
        {
          c5471->c_rxloc++;
          nvdbg("c_rxloc: %d\n", c5471->c_rxloc);
        }
    }
}
#endif

/****************************************************************************
 * Function: c5471_receive
 *
 * Description:
 *   An interrupt was received indicating the availability of a new RX packet
 *
 * Parameters:
 *   c5471  - Reference to the driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static void c5471_receive(struct c5471_driver_s *c5471)
{
  struct uip_driver_s *dev = &c5471->c_dev;
  uint16_t *packetmem;
  bool bmore = true;
  int packetlen = 0;
  int framelen;
  int nshorts;
  int i;
  int j = 0;

  /* Walk the newly received packet contained within the EIM and transfer
   * its contents to the uIP buffer. This frees up the memory contained within
   * the EIM for additional packets that might be received later from the network.
   */

  nvdbg("Reading TX CPU desc: %08x\n", c5471->c_txcpudesc);
  while (bmore)
    {
      /* Words #0 and #1 of descriptor */

      if (EIM_TXDESC_OWN_HOST & getreg32(c5471->c_txcpudesc))
        {
          /* No further packets to receive. */

          break;
        }

      /* Get the size of the frame from words #0 and #1 of the descriptor
       * and update the accumulated packet size
       */

      framelen   = (getreg32(c5471->c_txcpudesc) & EIM_TXDESC_BYTEMASK);
      packetlen += framelen;

      /* Check if the received packet will fit within the uIP packet buffer */

      if (packetlen < (CONFIG_NET_BUFSIZE + 4))
        {
          /* Get the packet memory from words #2 and #3 of descriptor */

          packetmem = (uint16_t*)getreg32(c5471->c_txcpudesc + sizeof(uint32_t));

          /* Divide by 2 with round up to get the number of 16-bit words. */

          nshorts = (framelen + 1) >> 1;
          nvdbg("Reading framelen: %d packetlen: %d nshorts: %d packetmen: %p\n",
                 framelen, packetlen, nshorts, packetmem);

          for (i = 0 ; i < nshorts; i++, j++)
            {
              /* Copy the data data from the hardware to c5471->c_dev.d_buf 16-bits at
               * a time.
               */

              ((uint16_t*)dev->d_buf)[j] = htons(packetmem[i]);
            }
        }
      else
        {
          nvdbg("Discarding framelen: %d packetlen\n", framelen, packetlen);
        }

      if (getreg32(c5471->c_txcpudesc) & EIM_TXDESC_LIF)
        {
          bmore = false;
        }

      /* Next, Clear all bits of words0/1 of the emptied descriptor except preserve
       * the settings of a select few. Can leave descriptor words 2/3 alone.
       */

      putreg32((getreg32(c5471->c_txcpudesc) & (EIM_TXDESC_WRAP_NEXT|EIM_TXDESC_INTRE)),
               c5471->c_txcpudesc);

      /* Next, Give ownership of now emptied descriptor back to the Ether Module's SWITCH */

      putreg32((getreg32(c5471->c_txcpudesc) | EIM_TXDESC_OWN_HOST), c5471->c_txcpudesc);

      /* Advance to the next data buffer */

      c5471_inctxcpu(c5471);
    }

  /* Adjust the packet length to remove the CRC bytes that uIP doesn't care about. */

  packetlen -= 4;

#ifdef CONFIG_C5471_NET_STATS
  /* Increment the count of received packets */

  c5471->c_rxpackets++;
#endif

  /* If we successfully transferred the data into the uIP buffer, then pass it on
   * to uIP for processing.
   */

  if (packetlen > 0 && packetlen < CONFIG_NET_BUFSIZE)
    {
      /* Set amount of data in c5471->c_dev.d_len. */

      dev->d_len = packetlen;
      nvdbg("Received packet, packetlen: %d type: %02x\n", packetlen, ntohs(BUF->type));
      c5471_dumpbuffer("Received packet", dev->d_buf, dev->d_len);

      /* We only accept IP packets of the configured type and ARP packets */

#ifdef CONFIG_NET_IPv6
      if (BUF->type == HTONS(UIP_ETHTYPE_IP6))
#else
      if (BUF->type == HTONS(UIP_ETHTYPE_IP))
#endif
        {
          uip_arp_ipin(dev);
          uip_input(dev);

          /* If the above function invocation resulted in data that should be
           * sent out on the network, the field  d_len will set to a value > 0.
           * Send that data now if ESM has let go of the RX descriptor giving us
           * access rights to submit another Ethernet frame.
           */

          if (dev->d_len > 0 &&
             (EIM_TXDESC_OWN_HOST & getreg32(c5471->c_rxcpudesc)) == 0)
            {
              uip_arp_out(dev);
              c5471_transmit(c5471);
            }
        }
      else if (BUF->type == HTONS(UIP_ETHTYPE_ARP))
        {
          uip_arp_arpin(dev);

          /* If the above function invocation resulted in data that should be
           * sent out on the network, the field  d_len will set to a value > 0.
           * Send that data now if ESM has let go of the RX descriptor giving us
           * access rights to submit another Ethernet frame.
           */

          if (dev->d_len > 0 &&
             (EIM_TXDESC_OWN_HOST & getreg32(c5471->c_rxcpudesc)) == 0)
            {
              c5471_transmit(c5471);
            }
        }
    }
#ifdef CONFIG_C5471_NET_STATS
  else
    {
      /* Increment the count of dropped packets */

      ndbg("Too big! packetlen: %d\n", packetlen);
      c5471->c_rxdropped++;
    }
#endif
}

/****************************************************************************
 * Function: c5471_txstatus
 *
 * Description:
 *   An interrupt was received indicating that the last TX packet(s) is done
 *
 * Parameters:
 *   c5471  - Reference to the driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

#ifdef CONFIG_C5471_NET_STATS
static void c5471_txstatus(struct c5471_driver_s *c5471)
{
  uint32_t desc = c5471->c_lastdescstart;
  uint32_t txstatus;

  /* Walk that last packet we just sent to collect xmit status bits. */

  txstatus = 0;
  if (c5471->c_lastdescstart && c5471->c_lastdescend)
    {
      for (;;)
        {
          txstatus |= (getreg32(desc) & EIM_RXDESC_STATUSMASK);
          if (desc == c5471->c_lastdescend)
            {
              break;
            }

          /* This packet is made up of several descriptors, find next one in chain. */

          if (EIM_RXDESC_WRAP_NEXT & getreg32(c5471->c_rxcpudesc))
            {
              /* Loop back around to base of descriptor queue. */

              desc = getreg32(EIM_CPU_RXBA) + EIM_RAM_START;
            }
          else
            {
              desc += 2 * sizeof(uint32_t);
            }
        }
    }

  if (txstatus)
    {
      if ((txstatus & EIM_RXDESC_MISS) != 0)
        {
          c5471->c_txmiss++;
          nvdbg("c_txmiss: %d\n", c5471->c_txmiss);
        }

      if ((txstatus & EIM_RXDESC_VLAN) != 0)
        {
          c5471->c_txvlan++;
          nvdbg("c_txvlan: %d\n", c5471->c_txvlan);
        }

      if ((txstatus & EIM_RXDESC_LFRAME) != 0)
        {
          c5471->c_txlframe++;
          nvdbg("c_txlframe: %d\n", c5471->c_txlframe);
        }

      if ((txstatus & EIM_RXDESC_SFRAME) != 0)
        {
          c5471->c_txsframe++;
          nvdbg("c_txsframe: %d\n", c5471->c_txsframe);
        }

      if ((txstatus & EIM_RXDESC_CRCERROR) != 0)
        {
          c5471->c_txcrc++;
          nvdbg("c_txcrc: %d\n", c5471->c_txcrc);
        }

      if ((txstatus & EIM_RXDESC_OVERRUN) != 0)
        {
          c5471->c_txoverrun++;
          nvdbg("c_txoverrun: %d\n", c5471->c_txoverrun);
        }

      if ((txstatus & EIM_RXDESC_OVERRUN) != 0)
        {
          c5471->c_txalign++;
          nvdbg("c_txalign: %d\n", c5471->c_txalign);
        }
    }
}
#endif

/****************************************************************************
 * Function: c5471_txdone
 *
 * Description:
 *   An interrupt was received indicating that the last TX packet(s) is done
 *
 * Parameters:
 *   c5471  - Reference to the driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static void c5471_txdone(struct c5471_driver_s *c5471)
{
  /* If no further xmits are pending, then cancel the TX timeout */

  wd_cancel(c5471->c_txtimeout);

  /* Then poll uIP for new XMIT data */

  (void)uip_poll(&c5471->c_dev, c5471_uiptxpoll);
}

/****************************************************************************
 * Function: c5471_interrupt
 *
 * Description:
 *   Hardware interrupt handler
 *
 * Parameters:
 *   irq     - Number of the IRQ that generated the interrupt
 *   context - Interrupt register state save info (architecture-specific)
 *
 * Returned Value:
 *   OK on success
 *
 * Assumptions:
 *
 ****************************************************************************/

static int c5471_interrupt(int irq, FAR void *context)
{
#if CONFIG_C5471_NET_NINTERFACES == 1
  register struct c5471_driver_s *c5471 = &g_c5471[0];
#else
# error "Additional logic needed to support multiple interfaces"
#endif

  /* Get and clear interrupt status bits */

  c5471->c_eimstatus = getreg32(EIM_STATUS);

  /* Handle interrupts according to status bit settings */
  /* Check if we received an incoming packet, if so, call c5471_receive() */

  if ((EIM_STATUS_CPU_TX & c5471->c_eimstatus) != 0)
    {
      /* An incoming packet has been received by the EIM from the network and
       * the interrupt associated with EIM's CPU TX queue has been asserted. It
       * is the EIM's CPU TX queue that we need to read from to get those
       * packets.  We use this terminology to stay consistent with the Orion
       * documentation.
       */

#ifdef CONFIG_C5471_NET_STATS
      /* Check for RX errors */

      c5471_rxstatus(c5471);
#endif

      /* Process the received packet */

      c5471_receive(c5471);
    }

  /* Check is a packet transmission just completed.  If so, call c5471_txdone */

  if ((EIM_STATUS_CPU_RX & c5471->c_eimstatus) != 0)
    {
      /* An outgoing packet has been processed by the EIM and the interrupt
       * associated with EIM's CPU RX que has been asserted. It is the EIM's
       * CPU RX queue that we put packets on to send them *out*. TWe use this
       * terminology to stay consistent with the Orion documentation.
       */

#ifdef CONFIG_C5471_NET_STATS
      /* Check for TX errors */

      c5471_txstatus(c5471);
#endif

      /* Handle the transmission done event */

      c5471_txdone(c5471);
    }

  /* Enable Ethernet interrupts (perhaps excluding the TX done interrupt if 
   * there are no pending transmissions.
   */

  return OK;
}

/****************************************************************************
 * Function: c5471_txtimeout
 *
 * Description:
 *   Our TX watchdog timed out.  Called from the timer interrupt handler.
 *   The last TX never completed.  Reset the hardware and start again.
 *
 * Parameters:
 *   argc - The number of available arguments
 *   arg  - The first argument
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static void c5471_txtimeout(int argc, uint32_t arg, ...)
{
  struct c5471_driver_s *c5471 = (struct c5471_driver_s *)arg;

  /* Increment statistics */

#ifdef CONFIG_C5471_NET_STATS
  c5471->c_txtimeouts++;
  nvdbg("c_txtimeouts: %d\n", c5471->c_txtimeouts);
#endif

  /* Then try to restart the hardware */

  c5471_ifdown(&c5471->c_dev);
  c5471_ifup(&c5471->c_dev);

  /* Then poll uIP for new XMIT data */

  (void)uip_poll(&c5471->c_dev, c5471_uiptxpoll);
}

/****************************************************************************
 * Function: c5471_polltimer
 *
 * Description:
 *   Periodic timer handler.  Called from the timer interrupt handler.
 *
 * Parameters:
 *   argc - The number of available arguments
 *   arg  - The first argument
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static void c5471_polltimer(int argc, uint32_t arg, ...)
{
  struct c5471_driver_s *c5471 = (struct c5471_driver_s *)arg;

  /* Check if the ESM has let go of the RX descriptor giving us access rights
   * to submit another Ethernet frame.
   */

  if ((EIM_TXDESC_OWN_HOST & getreg32(c5471->c_rxcpudesc)) == 0)
    {
      /* If so, update TCP timing states and poll uIP for new XMIT data */

      (void)uip_timer(&c5471->c_dev, c5471_uiptxpoll, C5471_POLLHSEC);
    }

  /* Setup the watchdog poll timer again */

  (void)wd_start(c5471->c_txpoll, C5471_WDDELAY, c5471_polltimer, 1, arg);
}

/****************************************************************************
 * Function: c5471_ifup
 *
 * Description:
 *   NuttX Callback: Bring up the Ethernet interface when an IP address is
 *   provided 
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   The user has assigned a MAC to the driver
 *
 ****************************************************************************/

static int c5471_ifup(struct uip_driver_s *dev)
{
  struct c5471_driver_s *c5471 = (struct c5471_driver_s *)dev->d_private;
  volatile uint32_t clearbits;

  ndbg("Bringing up: %d.%d.%d.%d\n",
       dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
       (dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24 );

  /* Initilize Ethernet interface */

  c5471_reset(c5471);

  /* Assign the MAC to the device */

  c5471_macassign(c5471);

  /* Clear pending interrupts by reading the EIM status register */

  clearbits = getreg32(EIM_STATUS);

  /* Enable interrupts going from EIM Module to Interrupt Module. */

  putreg32(((getreg32(EIM_INTEN) | EIM_INTEN_CPU_TX|EIM_INTEN_CPU_RX)), EIM_INTEN);

  /* Next, go on-line. According to the C547X documentation the enables have to
   * occur in this order to insure proper operation; ESM first then the ENET.
   */

  putreg32((getreg32(EIM_CTRL) | EIM_CTRL_ESM_EN), EIM_CTRL);   /* enable ESM */
  putreg32((getreg32(ENET0_MODE) | ENET_MODE_ENABLE), ENET0_MODE); /* enable ENET */
  up_mdelay(100);

  /* Set and activate a timer process */

  (void)wd_start(c5471->c_txpoll, C5471_WDDELAY, c5471_polltimer, 1, (uint32_t)c5471);

  /* Enable the Ethernet interrupt */

  c5471->c_bifup = true;
  up_enable_irq(C5471_IRQ_ETHER);
  return OK;
}

/****************************************************************************
 * Function: c5471_ifdown
 *
 * Description:
 *   NuttX Callback: Stop the interface.
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static int c5471_ifdown(struct uip_driver_s *dev)
{
  struct c5471_driver_s *c5471 = (struct c5471_driver_s *)dev->d_private;
  irqstate_t flags;

  ndbg("Stopping\n");

  /* Disable the Ethernet interrupt */

  flags = irqsave();
  up_disable_irq(C5471_IRQ_ETHER);

  /* Disable interrupts going from EIM Module to Interrupt Module. */

  putreg32((getreg32(EIM_INTEN) & ~(EIM_INTEN_CPU_TX|EIM_INTEN_CPU_RX)), EIM_INTEN);

  /* Disable ENET */

  putreg32((getreg32(ENET0_MODE) & ~ENET_MODE_ENABLE), ENET0_MODE); /* disable ENET */

  /* Disable ESM */

  putreg32((getreg32(EIM_CTRL) & ~EIM_CTRL_ESM_EN), EIM_CTRL);  /* disable ESM */

  /* Cancel the TX poll timer and TX timeout timers */

  wd_cancel(c5471->c_txpoll);
  wd_cancel(c5471->c_txtimeout);

  /* Reset the device */

  c5471->c_bifup = false;
  irqrestore(flags);
  return OK;
}

/****************************************************************************
 * Function: c5471_txavail
 *
 * Description:
 *   Driver callback invoked when new TX data is available.  This is a 
 *   stimulus perform an out-of-cycle poll and, thereby, reduce the TX
 *   latency.
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   Called in normal user mode
 *
 ****************************************************************************/

static int c5471_txavail(struct uip_driver_s *dev)
{
  struct c5471_driver_s *c5471 = (struct c5471_driver_s *)dev->d_private;
  irqstate_t flags;

  ndbg("Polling\n");
  flags = irqsave();

  /* Ignore the notification if the interface is not yet up */

  if (c5471->c_bifup)
    {
      /* Check if the ESM has let go of the RX descriptor giving us access
       * rights to submit another Ethernet frame.
       */

      if ((EIM_TXDESC_OWN_HOST & getreg32(c5471->c_rxcpudesc)) == 0)
       {
          /* If so, then poll uIP for new XMIT data */

          (void)uip_poll(&c5471->c_dev, c5471_uiptxpoll);
       }
    }

  irqrestore(flags);
  return OK;
}

/****************************************************************************
 * Function: c5471_addmac
 *
 * Description:
 *   NuttX Callback: Add the specified MAC address to the hardware multicast
 *   address filtering
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *   mac  - The MAC address to be added 
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IGMP
static int c5471_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
  FAR struct c5471_driver_s *priv = (FAR struct c5471_driver_s *)dev->d_private;

  /* Add the MAC address to the hardware multicast routing table */

#warning "Multicast MAC support not implemented"
  return OK;
}
#endif

/****************************************************************************
 * Function: c5471_rmmac
 *
 * Description:
 *   NuttX Callback: Remove the specified MAC address from the hardware multicast
 *   address filtering
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *   mac  - The MAC address to be removed 
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IGMP
static int c5471_rmmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
{
  FAR struct c5471_driver_s *priv = (FAR struct c5471_driver_s *)dev->d_private;

  /* Add the MAC address to the hardware multicast routing table */

#warning "Multicast MAC support not implemented"
  return OK;
}
#endif

/****************************************************************************
 * Name: c5471_eimreset
 *
 * Description
 *   The C547x docs states that a module should generally be reset according
 *   to the following algorithm:
 *
 *   1. Put the module in reset.
 *   2. Switch on the module clock.
 *   3. Wait for eight clock cycles.
 *   4. Release the reset.
 *
 ****************************************************************************/

static void c5471_eimreset (struct c5471_driver_s *c5471)
{
  /* Stop the EIM module clock */

  putreg32((getreg32(CLKM) | CLKM_EIM_CLK_STOP), CLKM);

  /* Put EIM module in reset */

  putreg32((getreg32(CLKM_RESET) & ~CLKM_RESET_EIM), CLKM_RESET);

  /* Start the EIM module clock */

  putreg32((getreg32(CLKM) & ~CLKM_EIM_CLK_STOP), CLKM);

  /* Assert nRESET to reset the board's PHY0/1 chips */

  putreg32((CLKM_CTL_RST_EXT_RESET|CLKM_CTL_RST_LEAD_RESET), CLKM_CTL_RST);
  up_mdelay(2);

  /* Release the peripheral nRESET signal */

  putreg32(CLKM_CTL_RST_LEAD_RESET, CLKM_CTL_RST);

  /* Release EIM module reset */

  putreg32((getreg32(CLKM_RESET) | CLKM_RESET_EIM), CLKM_RESET);

  /* All EIM register should now be in there power-up default states */

  c5471->c_lastdescstart = 0;
  c5471->c_lastdescend   = 0;
}

/****************************************************************************
 * Name: c5471_eimconfig
 *
 * Description
 *    Assumes that all registers are currently in the power-up reset state.
 *    This routine then modifies that state to provide our specific ethernet
 *    configuration.
 *
 ****************************************************************************/

static void c5471_eimconfig(struct c5471_driver_s *c5471)
{
  volatile uint32_t pbuf;
  volatile uint32_t desc;
  volatile uint32_t val;
  int i;

  desc = EIM_RAM_START;
  pbuf = EIM_RAM_START + 0x6C0;

  /* TX ENET 0 */

  ndbg("TX ENET0 desc: %08x pbuf: %08x\n", desc, pbuf);
  putreg32((desc & 0x0000ffff), ENET0_TDBA); /* 16-bit offset address */
  for (i = NUM_DESC_TX-1; i >= 0; i--)
    {
      if (i == 0)
        val = EIM_TXDESC_WRAP_NEXT;
      else
        val = EIM_TXDESC_WRAP_FIRST;

      val |= EIM_TXDESC_OWN_HOST|EIM_TXDESC_INTRE|EIM_TXDESC_PADCRC|EIM_PACKET_BYTES;

      putreg32(val, desc);
      desc += sizeof(uint32_t);

      putreg32(pbuf, desc);
      desc += sizeof(uint32_t);

      putreg32(0, pbuf);
      pbuf += EIM_PACKET_BYTES;

      putreg32(0, pbuf);
      pbuf += sizeof(uint32_t); /* Ether Module's "Buffer Usage Word" */
    }

  /* RX ENET 0 */

  ndbg("RX ENET0 desc: %08x pbuf: %08x\n", desc, pbuf);
  putreg32((desc & 0x0000ffff), ENET0_RDBA); /* 16-bit offset address */
  for (i = NUM_DESC_RX-1; i >= 0; i--)
    {
      if (i == 0)
        val = EIM_RXDESC_WRAP_NEXT;
      else
        val = EIM_RXDESC_WRAP_FIRST;

      val |= EIM_RXDESC_OWN_ENET|EIM_RXDESC_INTRE|EIM_RXDESC_PADCRC|EIM_PACKET_BYTES;

      putreg32(val, desc);
      desc += sizeof(uint32_t);

      putreg32(pbuf, desc);
      desc += sizeof(uint32_t);

      putreg32(0, pbuf);
      pbuf += EIM_PACKET_BYTES;

      putreg32(0, pbuf);
      pbuf += sizeof(uint32_t); /* Ether Module's "Buffer Usage Word" */
  }

  /* TX CPU */

  ndbg("TX CPU desc: %08x pbuf: %08x\n", desc, pbuf);
  c5471->c_txcpudesc = desc;
  putreg32((desc & 0x0000ffff), EIM_CPU_TXBA); /* 16-bit offset address */
  for (i = NUM_DESC_TX-1; i >= 0; i--)
    {
      /* Set words 1+2 of the TXDESC */

      if (i == 0)
        val = EIM_TXDESC_WRAP_NEXT;
      else
        val = EIM_TXDESC_WRAP_FIRST;

      val |= EIM_TXDESC_OWN_HOST|EIM_TXDESC_INTRE|EIM_TXDESC_PADCRC|EIM_PACKET_BYTES;

      putreg32(val, desc);
      desc += sizeof(uint32_t);

      putreg32(pbuf, desc);
      desc += sizeof(uint32_t);

      putreg32(0, pbuf);
      pbuf += EIM_PACKET_BYTES;

      putreg32(0, pbuf);
      pbuf += sizeof(uint32_t); /* Ether Module's "Buffer Usage Word" */
  }

  /* RX CPU */

  ndbg("RX CPU desc: %08x pbuf: %08x\n", desc, pbuf);
  c5471->c_rxcpudesc = desc;
  putreg32((desc & 0x0000ffff), EIM_CPU_RXBA); /* 16-bit offset address */
  for (i = NUM_DESC_RX-1; i >= 0; i--)
    {
      /* Set words 1+2 of the RXDESC */

      if (i == 0)
        val = EIM_RXDESC_WRAP_NEXT;
      else
        val = EIM_RXDESC_WRAP_FIRST;

      val |= EIM_RXDESC_OWN_ENET|EIM_RXDESC_INTRE|EIM_RXDESC_PADCRC|EIM_PACKET_BYTES;

      putreg32(val, desc);
      desc += sizeof(uint32_t);

      putreg32(pbuf, desc);
      desc += sizeof(uint32_t);

      putreg32(0, pbuf);
      pbuf += EIM_PACKET_BYTES;

      putreg32(0, pbuf);
      pbuf += sizeof(uint32_t); /* Ether Module's "Buffer Usage Word" */
  }
  ndbg("END desc: %08x pbuf: %08x\n", desc, pbuf);

  /* Save the descriptor packet size */

  putreg32(EIM_PACKET_BYTES, EIM_BUFSIZE);

  /* Set the filter mode */

#if 0
  putreg32(EIM_FILTER_UNICAST, EIM_CPU_FILTER);
#else
//  putreg32(EIM_FILTER_LOGICAL|EIM_FILTER_UNICAST|EIM_FILTER_MULTICAST|
//           EIM_FILTER_BROADCAST, EIM_CPU_FILTER);
  putreg32(EIM_FILTER_UNICAST|EIM_FILTER_MULTICAST|EIM_FILTER_BROADCAST, EIM_CPU_FILTER);
#endif 

  /* Disable all Ethernet interrupts */

  putreg32(0x00000000, EIM_INTEN);

  /* Setup the EIM control register */

#if 1
  putreg32(EIM_CTRL_ENET0_EN|EIM_CTRL_RXENET0_EN|EIM_CTRL_TXENET0_EN|
           EIM_CTRL_RXCPU_EN|EIM_CTRL_TXCPU_EN, EIM_CTRL);
#else 
  putreg32(EIM_CTRL_ENET0_EN|EIM_CTRL_ENET0_FLW|EIM_CTRL_RXENET0_EN|
           EIM_CTRL_TXENET0_EN|EIM_CTRL_RXCPU_EN|EIM_CTRL_TXCPU_EN, EIM_CTRL);
#endif

#if 1 
  putreg32(0x00000000, EIM_MFVHI);
#else
  putreg32(0x0000ff00, EIM_MFVHI);
#endif 

  putreg32(0x00000000, EIM_MFVLO);
  putreg32(0x00000000, EIM_MFMHI);
  putreg32(0x00000000, EIM_MFMLO);
  putreg32(0x00000018, EIM_RXTH);
  putreg32(0x00000000, EIM_CPU_RXREADY);

  /* Setup the ENET0 mode register */

#if 1
  putreg32(ENET_MODE_RJCT_SFE|ENET_MODE_MWIDTH|ENET_MODE_FULLDUPLEX, ENET0_MODE);
#else
  putreg32(ENET_MODE_RJCT_SFE|ENET_MODE_MWIDTH|ENET_MODE_HALFDUPLEX, ENET0_MODE);
#endif 

  putreg32(0x00000000, ENET0_BOFFSEED);
  putreg32(0x00000000, ENET0_FLWPAUSE);
  putreg32(0x00000000, ENET0_FLWCONTROL);
  putreg32(0x00000000, ENET0_VTYPE);

#if 0 
  putreg32(ENET_ADR_BROADCAST|ENET_ADR_PROMISCUOUS, ENET0_ADRMODE_EN);
#else 
  /* The CPU port is not PROMISCUOUS, it wants a no-promiscuous address
   * match yet the SWITCH receives packets from the PROMISCUOUS ENET0
   * which routes all packets for filter matching at the CPU port which
   * then allows the s/w to see the new incoming packetes that passed
   * the filter. Here we are setting the main SWITCH closest the ether
   * wire.
   */

  putreg32(ENET_ADR_PROMISCUOUS, ENET0_ADRMODE_EN);
#endif 

  putreg32(0x00000000, ENET0_DRP);
  up_mdelay(500);
}

/****************************************************************************
 * Name: c5471_reset
 *
 * Description
 *
 ****************************************************************************/

static void c5471_reset(struct c5471_driver_s *c5471)
{
#if (CONFIG_C5471_ETHERNET_PHY == ETHERNET_PHY_LU3X31T_T64)
  ndbg("EIM reset\n");
  c5471_eimreset(c5471);
#endif
  ndbg("PHY init\n");
  c5471_phyinit();

  ndbg("EIM config\n");
  c5471_eimconfig(c5471);
}

/****************************************************************************
 * Name: c5471_macassign
 *
 * Description
 *    Set the mac address of our CPU ether port so that when the SWITCH
 *    receives packets from the PROMISCUOUS ENET0 it will switch them to the
 *    CPU port and cause a packet arrival event on the Switch's CPU TX queue
 *    when an address match occurs. The CPU port is not PROMISCUOUS and wants
 *    to see only packets specifically addressed to this device.
 *
 ****************************************************************************/

static void c5471_macassign(struct c5471_driver_s *c5471)
{
  struct uip_driver_s *dev = &c5471->c_dev;
  uint8_t *mptr = dev->d_mac.ether_addr_octet;
  register uint32_t tmp;

  ndbg("MAC: %0x:%0x:%0x:%0x:%0x:%0x\n",
        mptr[0], mptr[1], mptr[2], mptr[3], mptr[4], mptr[5]);

  /* Set CPU port MAC address. S/W will only see incoming packets that match
   * this destination address.
   */

  tmp = (((uint32_t)mptr[0]) << 8) | ((uint32_t)mptr[1]);
  putreg32(tmp, EIM_CPU_DAHI);

  tmp = (((uint32_t)mptr[2]) << 24) | (((uint32_t)mptr[3]) << 16) |
        (((uint32_t)mptr[4]) <<  8) |  ((uint32_t)mptr[5]);
  putreg32(tmp, EIM_CPU_DALO);

#if 0
  /* Set the ENET MAC address */

  putreg32(getreg32(EIM_CPU_DAHI), ENET0_PARHI);
  putreg32(getreg32(EIM_CPU_DALO), ENET0_PARLO);
  putreg32(getreg32(EIM_CPU_DAHI), ENET0_LARHI);
  putreg32(getreg32(EIM_CPU_DALO), ENET0_LARLO);

#else
  /* ENET MAC assignment not needed for its PROMISCUOUS mode */ 

  putreg32(0x00000000, ENET0_PARHI);
  putreg32(0x00000000, ENET0_PARLO);
  putreg32(0x00000000, ENET0_LARHI);
  putreg32(0x00000000, ENET0_LARLO);

#endif
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Function: c5471_initialize
 *
 * Description:
 *   Initialize the Ethernet driver
 *
 * Parameters:
 *   None
 *
 * Returned Value:
 *   OK on success; Negated errno on failure.
 *
 * Assumptions:
 *
 ****************************************************************************/

/* Initialize the DM90x0 chip and driver */

void up_netinitialize(void)
{
  /* Attach the IRQ to the driver */

  if (irq_attach(C5471_IRQ_ETHER, c5471_interrupt))
    {
      /* We could not attach the ISR to the ISR */

      nlldbg("irq_attach() failed\n");
      return;
    }

  /* Initialize the driver structure */

  memset(g_c5471, 0, CONFIG_C5471_NET_NINTERFACES*sizeof(struct c5471_driver_s));
  g_c5471[0].c_dev.d_ifup    = c5471_ifup;     /* I/F down callback */
  g_c5471[0].c_dev.d_ifdown  = c5471_ifdown;   /* I/F up (new IP address) callback */
  g_c5471[0].c_dev.d_txavail = c5471_txavail;  /* New TX data callback */
 #ifdef CONFIG_NET_IGMP
  g_c5471[0].c_dev.d_addmac  = c5471_addmac;   /* Add multicast MAC address */
  g_c5471[0].c_dev.d_rmmac   = c5471_rmmac;    /* Remove multicast MAC address */
#endif
 g_c5471[0].c_dev.d_private = (void*)g_c5471; /* Used to recover private state from dev */

  /* Create a watchdog for timing polling for and timing of transmisstions */

  g_c5471[0].c_txpoll       = wd_create();   /* Create periodic poll timer */
  g_c5471[0].c_txtimeout    = wd_create();   /* Create TX timeout timer */

  /* Register the device with the OS so that socket IOCTLs can be performed */

  (void)netdev_register(&g_c5471[0].c_dev);
}

#endif /* CONFIG_NET */