28 lines
1011 B
Plaintext
28 lines
1011 B
Plaintext
|
README
|
||
|
|
======
|
||
|
|
|
||
|
|
The NuttX configuration for the Olimex STM32-H405 is based on the configuration
|
||
|
|
Olimex STM32-P207.
|
||
|
|
|
||
|
|
It was tested with the NuttX EABI "buildroot" Toolchain.
|
||
|
|
|
||
|
|
Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
|
||
|
|
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
|
||
|
|
are enabled so that the JTAG connection is not disconnected by the idle
|
||
|
|
loop.
|
||
|
|
|
||
|
|
Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
|
||
|
|
to '/dev/console' which makes problems with the shell over USB.
|
||
|
|
|
||
|
|
The following peripherals are enabled in this configuration.
|
||
|
|
- LED: Shows the sytem status
|
||
|
|
|
||
|
|
- Button: Built in app 'buttons' works.
|
||
|
|
|
||
|
|
- ADC: ADC1 samples ADC_IN1. Built in app 'adc' works.
|
||
|
|
|
||
|
|
- USB-FS-OTG: The console is running on the virtual serial port. Note that you
|
||
|
|
have to press enter three times until NSH appears.
|
||
|
|
|
||
|
|
- CAN: Built in app 'can' is enabled but not tested, since no CAN transceiver
|
||
|
|
is on board.
|