nuttx/boards/z80/z8/z8f64200100kit/configs/ostest/Make.defs

300 lines
9.3 KiB
Plaintext
Raw Normal View History

############################################################################
# boards/z80/z8/z8f64200100kit/configs/ostest/Make.defs
#
2013-11-29 00:47:03 +01:00
# Copyright (C) 2008, 2012-2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk
# These are the directories where the ZDS-II toolchain is installed. NOTE
# that short 8.3 path names are used in order to avoid spaces. On my machine
# I have:
#
# C:\PROGRA~1\ = C:\Profram Files\
# C:\PROGRA~2\ = C:\Program Files (x86)\
#
# Your PC may be configured differently.
ifeq ($(CONFIG_Z8_ZDSII_V522),y)
ZDSVERSION = 5.2.2
else # ifeq ($(CONFIG_Z8_ZDSII_V500),y)
ZDSVERSION = 5.0.0
endif
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
ZDSINSTALLDIR = C:/PROGRA~2/ZiLOG/ZDSII_Z8Encore!_$(ZDSVERSION)
INSTALLDIR = ${shell echo $(ZDSINSTALLDIR)| sed -e "s/\//\\/g"}
ZDSBINDIR = $(INSTALLDIR)\bin
ZDSSTDINCDIR = $(INSTALLDIR)\include\std
ZDSZILOGINCDIR = $(INSTALLDIR)\include\zilog
ifeq ($(CONFIG_ARCH_CHIP_Z8F642X),y)
ZDSDEVINCDIR = $(INSTALLDIR)\Z8Encore_F642X
endif
ifeq ($(CONFIG_ARCH_CHIP_Z8F640X),y)
ZDSDEVINCDIR = $(INSTALLDIR)\Z8Encore_F640X
endif
ZDSSTDLIBDIR = $(INSTALLDIR)\lib\std
ZDSZILOGLIBDIR = $(INSTALLDIR)\lib\zilog
# CFLAGs
ARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
EARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
ARCHSTDINCLUDES = -stdinc:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR);$(ZDSDEVINCDIR)
ARCHUSRINCLUDES = -usrinc:.
else
WINTOOL = y
ZDSINSTALLDIR = C:/PROGRA~2/ZiLOG/ZDSII_Z8Encore!_$(ZDSVERSION)
INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
ZDSBINDIR = $(INSTALLDIR)/bin
ZDSSTDINCDIR = $(INSTALLDIR)/include/std
ZDSZILOGINCDIR = $(INSTALLDIR)/include/zilog
ifeq ($(CONFIG_ARCH_CHIP_Z8F642X),y)
ZDSDEVINCDIR = $(ZDSZILOGINCDIR)/Z8Encore_F642X
endif
ifeq ($(CONFIG_ARCH_CHIP_Z8F640X),y)
ZDSDEVINCDIR = $(ZDSZILOGINCDIR)/Z8Encore_F640X
endif
ZDSSTDLIBDIR = $(INSTALLDIR)/lib/std
ZDSZILOGLIBDIR = $(INSTALLDIR)/lib/zilog
# These are the same directories but with the directory separator
# character swapped as needed by the ZDS-II compiler
WTOPDIR = ${shell cygpath -w "$(TOPDIR)"}
WZDSSTDINCDIR = ${shell cygpath -w "$(ZDSSTDINCDIR)"}
WZDSZILOGINCDIR = ${shell cygpath -w "$(ZDSZILOGINCDIR)"}
WZDSDEVINCDIR = ${shell cygpath -w "$(ZDSDEVINCDIR)"}
WZDSSTDLIBDIR = ${shell cygpath -w "$(ZDSSTDLIBDIR)"}
WZDSZILOGLIBDIR = ${shell cygpath -w "$(ZDSZILOGLIBDIR)"}
# Escaped versions
ETOPDIR = ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
EZDSSTDINCDIR = ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
EZDSZILOGINCDIR = ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
# CFLAGs
ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR);$(WZDSDEVINCDIR)'
ARCHUSRINCLUDES = -usrinc:'.'
endif
# Assembler definitions
ifeq ($(CONFIG_ARCH_CHIP_Z8F642X),y)
ARCHFAMILYDEF = _Z8ENCORE_F642X
ARCHSERIESDEF = _Z8ENCORE_64K_SERIES
ARCHREVAA = -NOrevaa
ifeq ($(CONFIG_ARCH_CHIP_Z8F6423),y)
ARCHCPU = Z8F6423
ARCHCPUDEF = _Z8F6423
endif
endif
ifeq ($(CONFIG_ARCH_CHIP_Z8F640X),y)
ARCHFAMILYDEF = _Z8ENCORE_F640X
ARCHSERIESDEF = _Z8ENCORE_640_FAMILY
ARCHREVAA = -revaa
ifeq ($(CONFIG_ARCH_CHIP_Z8F6403),y)
ARCHCPU = Z8F6403
ARCHCPUDEF = _Z8F6403
endif
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHASMOPTIMIZATION = -debug -sdiopt
else
ARCHASMOPTIMIZATION = -nodebug -sdiopt
endif
ARCHASMCPUFLAGS = -cpu:$(ARCHCPU) -NOigcase $(ARCHREVAA)
ARCHASMLIST = -list -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
ARCHASMWARNINGS = -warn
ARCHASMDEFINES = -define:$(ARCHCPUDEF)=1 -define:$(ARCHSERIESDEF)=1 -define:$(ARCHFAMILYDEF)=1 -define:__ASSEMBLY__
AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)
# Compiler definitions
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -debug
else
ARCHOPTIMIZATION = -nodebug
endif
ifeq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += -NOregvar -reduceopt
else
ARCHOPTIMIZATION += -regvar
endif
ARCHCPUFLAGS = -chartype:S -model:L -const:RAM -NOoptlink -promote -cpu:$(ARCHCPU) $(ARCHREVAA) -NOgenprintf \
-asmsw:" $(ARCHASMCPUFLAGS) $(EARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)"
ARCHLIST = -keeplst -NOlist -NOlistinc -keepasm
ARCHPICFLAGS =
ARCHWARNINGS = -warn
ARCHDEFINES = -define:$(ARCHFAMILYDEF) -define:$(ARCHCPUDEF) -define:$(ARCHSERIESDEF)
ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
CPPDEFINES = -D$(ARCHFAMILYDEF) -D$(ARCHCPUDEF) -D$(ARCHSERIESDEF) -D__ASSEMBLY__
CPPINCLUDES = -I$(TOPDIR)$(DELIM)include
CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES)
# Librarian definitions
ARFLAGS = -quiet -warn
# Linker definitions
LINKCMDTEMPLATE = $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)configs$(DELIM)ostest$(DELIM)ostest.linkcmd
# Tool names/pathes
CROSSDEV =
CC = ez8cc.exe
CPP = gcc -E
LD = ez8link.exe
AS = ez8asm.exe
AR = ez8lib.exe
# File extensions
ASMEXT = .asm
OBJEXT = .obj
LIBEXT = .lib
EXEEXT = .hex
# These are the macros that will be used in the NuttX make system
# to compile and assembly source files and to insert the resulting
# object files into an archive
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
define PREPROCESS
@echo CPP: $1->$2
$(Q) "$(CPP)" $(CPPFLAGS) $($(strip $1)_CPPFLAGS) $1 -o $2
endef
define COMPILE
$(Q) "$(CC)" $(CFLAGS) $($(strip $1)_CFLAGS) ${shell echo $1 | sed -e "s/\//\\/g"}
endef
define ASSEMBLE
$(Q) "$(AS)" $(AFLAGS) $($(strip $1)_AFLAGS) ${shell echo $1 | sed -e "s/\//\\/g"}
endef
2013-11-29 00:47:03 +01:00
define MOVEOBJ
$(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj")
$(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst")
$(call MOVEFILE, "$1.src", "$2$(DELIM)$1.src")
endef
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
define MOVEOBJ
$(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj")
$(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst")
$(call MOVEFILE, "$1.src", "$2$(DELIM)$1.src")
endef
define ARCHIVE
$(Q) for %%G in ($(2)) do ( "$(AR)" $(ARFLAGS) $1=-+%%G )
endef
define CLEAN
$(Q) if exist *.obj (del /f /q *.obj)
$(Q) if exist *.src (del /f /q *.src)
$(Q) if exist *.lib (del /f /q *.lib)
$(Q) if exist *.hex (del /f /q *.hex)
$(Q) if exist *.lod (del /f /q *.lod)
$(Q) if exist *.lst (del /f /q *.lst)
endef
else
define PREPROCESS
@echo "CPP: $1->$2"
$(Q) "$(CPP)" $(CPPFLAGS) $($(strip $1)_CPPFLAGS) $1 -o $2
endef
define COMPILE
$(Q) (wfile=`cygpath -w "$1"`; "$(CC)" $(CFLAGS) $($(strip $1)_CFLAGS) $$wfile)
endef
define ASSEMBLE
$(Q) (wfile=`cygpath -w "$1"`; "$(AS)" $(AFLAGS) $($(strip $1)_AFLAGS) $$wfile)
endef
define ARCHIVE
$(Q) for __obj in $(2) ; do \
"$(AR)" $(ARFLAGS) $1=-+$$__obj \
done
endef
define CLEAN
$(Q) rm -f *.obj *.src *.lib *.hex *.lod *.lst
endef
endif
# Windows native host tool definitions
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
HOSTCC = mingw32-gcc.exe
HOSTINCLUDES = -I.
2015-09-01 18:02:36 +02:00
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =
HOSTEXEEXT = .exe
# Windows-native host tools
MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative
else
# Linux/Cygwin host tool definitions
HOSTCC = gcc
HOSTINCLUDES = -I.
2015-09-01 18:02:36 +02:00
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =
# This is the tool to use for dependencies (i.e., none)
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkwindeps.sh
# ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
endif