Add lpc313x header files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2425 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
45a2c688a1
commit
010cd59aac
262
arch/arm/src/lpc313x/lpc313x_uart.h
Executable file
262
arch/arm/src/lpc313x/lpc313x_uart.h
Executable file
@ -0,0 +1,262 @@
|
||||
/************************************************************************************************
|
||||
* arch/arm/src/lpc313x/lpc313x_uart.h
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_LPC313X_UART_H
|
||||
#define __ARCH_ARM_SRC_LPC313X_UART_H
|
||||
|
||||
/************************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include "lpc313x_memorymap.h"
|
||||
|
||||
/************************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************************/
|
||||
|
||||
/* UART register base address offset into the APB2 domain ***************************************/
|
||||
|
||||
#define LPC313X_UART_VBASE (LPC313X_APB2_VSECTION+LPC313X_APB2_UART_OFFSET)
|
||||
#define LPC313X_UART_PBASE (LPC313X_APB2_PSECTION+LPC313X_APB2_UART_OFFSET)
|
||||
|
||||
/* UART register offsets (with respect to the UART base) ****************************************/
|
||||
|
||||
#define LPC313X_UART_RBR_OFFSET 0x000 /* Receiver Buffer Register */
|
||||
#define LPC313X_UART_THR_OFFSET 0x000 /* Transmitter Holding Register */
|
||||
#define LPC313X_UART_DLL_OFFSET 0x000 /* Divisor Latch LSB */
|
||||
#define LPC313X_UART_DLM_OFFSET 0x004 /* Divisor Latch MSB */
|
||||
#define LPC313X_UART_IER_OFFSET 0x004 /* Interrupt Enable Register */
|
||||
#define LPC313X_UART_IIR_OFFSET 0x008 /* Interrupt Identification Register */
|
||||
#define LPC313X_UART_FCR_OFFSET 0x008 /* FIFO Control Register */
|
||||
#define LPC313X_UART_LCR_OFFSET 0x00c /* Line Control Register */
|
||||
#define LPC313X_UART_MCR_OFFSET 0x010 /* Modem Control Register */
|
||||
#define LPC313X_UART_LSR_OFFSET 0x014 /* Line Status Register */
|
||||
#define LPC313X_UART_MSR_OFFSET 0x018 /* Modem status Register */
|
||||
#define LPC313X_UART_SCR_OFFSET 0x01c /* Scratch Register */
|
||||
/* 0x020: Reserved */
|
||||
#define LPC313X_UART_ICR_OFFSET 0x024 /* IrDA Control Register */
|
||||
#define LPC313X_UART_FDR_OFFSET 0x028 /* Fractional Divider Register */
|
||||
/* 0x02c: Reserved */
|
||||
#define LPC313X_UART_POP_OFFSET 0x030 /* NHP Pop Register */
|
||||
#define LPC313X_UART_MODE_OFFSET 0x034 /* NHP Mode Selection Register */
|
||||
/* 0x038-0xfd4: Reserved */
|
||||
#define LPC313X_UART_INTCE_OFFSET 0xfd8 /* Interrupt Clear Enable Register */
|
||||
#define LPC313X_UART_INTSE_OFFSET 0xfdc /* Interrupt Set Enable Register */
|
||||
#define LPC313X_UART_INTS_OFFSET 0xfe0 /* Interrupt Status Register */
|
||||
#define LPC313X_UART_INTE_OFFSET 0xfe4 /* Interrupt Enable Register */
|
||||
#define LPC313X_UART_INTCS_OFFSET 0xfe8 /* Interrupt Clear Status Register */
|
||||
#define LPC313X_UART_INTSS_OFFSET 0xfec /* Interrupt Set Status Register */
|
||||
/* 0xff0-0xff8: Reserved */
|
||||
|
||||
/* UART register (virtual) addresses ************************************************************/
|
||||
|
||||
#define LPC313X_UART_RBR (LPC313X_UART_VBASE+LPC313X_UART_RBR_OFFSET)
|
||||
#define LPC313X_UART_THR (LPC313X_UART_VBASE+LPC313X_UART_THR_OFFSET)
|
||||
#define LPC313X_UART_DLL (LPC313X_UART_VBASE+LPC313X_UART_DLL_OFFSET)
|
||||
#define LPC313X_UART_DLM (LPC313X_UART_VBASE+LPC313X_UART_DLM_OFFSET)
|
||||
#define LPC313X_UART_IER (LPC313X_UART_VBASE+LPC313X_UART_IER_OFFSET)
|
||||
#define LPC313X_UART_IIR (LPC313X_UART_VBASE+LPC313X_UART_IIR_OFFSET)
|
||||
#define LPC313X_UART_FCR (LPC313X_UART_VBASE+LPC313X_UART_FCR_OFFSET)
|
||||
#define LPC313X_UART_LCR (LPC313X_UART_VBASE+LPC313X_UART_LCR_OFFSET)
|
||||
#define LPC313X_UART_MCR (LPC313X_UART_VBASE+LPC313X_UART_MCR_OFFSET)
|
||||
#define LPC313X_UART_LSR (LPC313X_UART_VBASE+LPC313X_UART_LSR_OFFSET)
|
||||
#define LPC313X_UART_MSR (LPC313X_UART_VBASE+LPC313X_UART_MSR_OFFSET)
|
||||
#define LPC313X_UART_SCR (LPC313X_UART_VBASE+LPC313X_UART_SCR_OFFSET)
|
||||
#define LPC313X_UART_ICR (LPC313X_UART_VBASE+LPC313X_UART_ICR_OFFSET)
|
||||
#define LPC313X_UART_FDR (LPC313X_UART_VBASE+LPC313X_UART_FDR_OFFSET)
|
||||
#define LPC313X_UART_POP (LPC313X_UART_VBASE+LPC313X_UART_POP_OFFSET)
|
||||
#define LPC313X_UART_MODE (LPC313X_UART_VBASE+LPC313X_UART_MODE_OFFSET)
|
||||
#define LPC313X_UART_INTCE (LPC313X_UART_VBASE+LPC313X_UART_INTCE_OFFSET)
|
||||
#define LPC313X_UART_INTSE (LPC313X_UART_VBASE+LPC313X_UART_INTSE_OFFSET)
|
||||
#define LPC313X_UART_INTS (LPC313X_UART_VBASE+LPC313X_UART_INTS_OFFSET)
|
||||
#define LPC313X_UART_INTE (LPC313X_UART_VBASE+LPC313X_UART_INTE_OFFSET)
|
||||
#define LPC313X_UART_INTCS (LPC313X_UART_VBASE+LPC313X_UART_INTCS_OFFSET)
|
||||
#define LPC313X_UART_INTSS (LPC313X_UART_VBASE+LPC313X_UART_INTSS_OFFSET)
|
||||
|
||||
/* UART register bit definitions ****************************************************************/
|
||||
/* Receive Buffer Register RBR, address 0x15001000 */
|
||||
|
||||
#define UART_RBR_SHIFT (0) /* Bits 0-7 */
|
||||
#define UART_RBR_MASK (0xff << UART_RBR_SHIFT)
|
||||
|
||||
/* Transmitter Holding Register THR, address 0x15001000 */
|
||||
|
||||
#define UART_THR_SHIFT (0) /* Bits 0-7 */
|
||||
#define UART_THR_MASK (0xff << UART_THR_SHIFT)
|
||||
|
||||
/* Divisor register Latch LSB DLL, address 0x15001000 */
|
||||
|
||||
#define UART_DLL_SHIFT (0) /* Bits 0-7 */
|
||||
#define UART_DLL_MASK (0xff << UART_DLL_SHIFT)
|
||||
|
||||
/* Divisor latch register MSB DLM, address 0x15001004 */
|
||||
|
||||
#define UART_DLM_SHIFT (0) /* Bits 0-7 */
|
||||
#define UART_DLM_MASK (0xff << UART_DLM_SHIFT)
|
||||
|
||||
/* Interrupt Enable Register IER, address 0x15001004 */
|
||||
|
||||
#define UART_IER_CTSINTEN (1 << 7) /* Bit 7: Enable modem status interrupt on CTS transition */
|
||||
#define UART_IER_MSINTEN (1 << 3) /* Bit 3: Enable Modem Status interrupt */
|
||||
#define UART_IER_RLSINTEN (1 << 2) /* Bit 2: Receiver Line Status interrupt enable */
|
||||
#define UART_IER_THREINTEN (1 << 1) /* Bit 1: Transmitter Holding Register Empty interrupt enable */
|
||||
#define UART_IER_RDAINTEN (1 << 0) /* Bit 0: Receive Data Available interrupt enable */
|
||||
|
||||
/* Interrupt Identification Register IIR, address 0x15001008 */
|
||||
|
||||
#define UART_IIR_FIFOEN_SHIFT (6) /* Bits 6-7: Copies of FCR[0] */
|
||||
#define UART_IIR_FIFOEN_MASK (3 << UART_IIR_FIFOEN_SHIFT)
|
||||
#define UART_IIR_INTID_SHIFT (1) /* Bits 1-3: Interrupt identification */
|
||||
#define UART_IIR_INTID_MASK (7 << UART_IIR_INTID_SHIFT)
|
||||
# define UART_IIR_INTID_MODEMSTATUS (0 << UART_IIR_INTID_SHIFT) /* Modem status */
|
||||
# define UART_IIR_INTID_THREMPTY (1 << UART_IIR_INTID_SHIFT) /* Transmitter Holding Register empty */
|
||||
# define UART_IIR_INTID_REVCDATA (2 << UART_IIR_INTID_SHIFT) /* Received Data Available */
|
||||
# define UART_IIR_INTID_LINESTATUS (3 << UART_IIR_INTID_SHIFT) /* Receiver Line Status */
|
||||
# define UART_IIR_INTID_TIMEOUT (6 << UART_IIR_INTID_SHIFT) /* Character time-out */
|
||||
#define UART_IIR_INTSTATUS (1 << 0) /* Bit 0: 0 Interrupt status */
|
||||
|
||||
/* FIFO Control Register FCR, address 0x15001008 */
|
||||
|
||||
#define UART_FCR_RXTRIGLEVEL_SHIFT (6) /* Bits 6-7: 7:6 Receiver trigger level selection */
|
||||
#define UART_FCR_RXTRIGLEVEL_MASK (3 << UART_FCR_RXTRIGLEVEL_SHIFT)
|
||||
#define UART_FCR_RXTRIGLEVEL (0 << UART_FCR_RXTRIGLEVEL_SHIFT) /* Rx trigger at character 1 */
|
||||
#define UART_FCR_RXTRIGLEVEL (1 << UART_FCR_RXTRIGLEVEL_SHIFT) /* Rx trigger at character 16 */
|
||||
#define UART_FCR_RXTRIGLEVEL (2 << UART_FCR_RXTRIGLEVEL_SHIFT) /* Rx trigger at character 32 */
|
||||
#define UART_FCR_RXTRIGLEVEL (3 << UART_FCR_RXTRIGLEVEL_SHIFT) /* Rx trigger at character 56 */
|
||||
#define UART_FCR_DMAMODE (1 << 3) /* Bit 3: DMA mode select */
|
||||
#define UART_FCR_TXFIFORST (1 << 2) /* Bit 2: Transmitter FIFO reset */
|
||||
#define UART_FCR_RXFIFORST (1 << 1) /* Bit 1: Receiver FIFO reset */
|
||||
#define UART_FCR_FIFOENABLE (1 << 0) /* Bit 0: Transmit and receive FIFO enable */
|
||||
|
||||
/* Line Control Register LCR, address 0x1500100c */
|
||||
|
||||
#define UART_LCR_DLAB (1 << 7) /* Bit 7: Divisor Latch Access bit */
|
||||
#define UART_LCR_BRKCTRL (1 << 6) /* Bit 6: Break control bit */
|
||||
#define UART_LCR_PARSTICK (1 << 5) /* Bit 5: Enable sticky parity mode */
|
||||
#define UART_LCR_PAREVEN (1 << 4) /* Bit 4: Select even parity */
|
||||
#define UART_LCR_PAREN (1 << 3) /* Bit 3: Parity enable */
|
||||
#define UART_LCR_NSTOPBITS (1 << 2) /* Bit 2: Number of stop bits selector */
|
||||
#define UART_LCR_WDLENSEL_SHIFT (0) /* Bits 0-1: Word length selector */
|
||||
#define UART_LCR_WDLENSEL_MASK (3 << UART_LCR_WDLENSEL_SHIFT)
|
||||
#define UART_LCR_WDLENSEL_5BITS (0 << UART_LCR_WDLENSEL_SHIFT) /* Char length=5 stopbits=1 or 1.5*/
|
||||
#define UART_LCR_WDLENSEL_6BITS (1 << UART_LCR_WDLENSEL_SHIFT) /* Char length=6 stopbits=1 or 2 */
|
||||
#define UART_LCR_WDLENSEL_7BITS (2 << UART_LCR_WDLENSEL_SHIFT) /* Char length=7 stopbits=1 or 2 */
|
||||
#define UART_LCR_WDLENSEL_8BITS (3 << UART_LCR_WDLENSEL_SHIFT) /* Char length=8 stopbits=1 or 2 */
|
||||
|
||||
/* Modem Control Register MCR, address 0x15001010 */
|
||||
|
||||
#define UART_MCR_AUTOCTSEN (1 << 7) /* Bit 7: Auto-cts flow control enable */
|
||||
#define UART_MCR_AUTORTSEN (1 << 6) /* Bit 6: Auto-rts flow control enable */
|
||||
#define UART_MCR_LOOPEN (1 << 4) /* Bit 4: Loop-back mode enable */
|
||||
#define UART_MCR_RTS (1 << 1) /* Bit 1: Request To Send */
|
||||
|
||||
/* Line Status Register LSR, address 0x15001014 */
|
||||
|
||||
#define UART_LSR_RXER (1 << 7) /* Bit 7: Error in receiver FIFO */
|
||||
#define UART_LSR_TEMT (1 << 6) /* Bit 6: Transmitter empty (TSR and THR) */
|
||||
#define UART_LSR_THRE (1 << 5) /* Bit 5: Transmitter Holding Register empty */
|
||||
#define UART_LSR_BI (1 << 4) /* Bit 4: Break indication */
|
||||
#define UART_LSR_FE (1 << 3) /* Bit 3: Framing error */
|
||||
#define UART_LSR_PE (1 << 2) /* Bit 2: Parity error */
|
||||
#define UART_LSR_OE (1 << 1) /* Bit 1: Overrun error */
|
||||
#define UART_LSR_DR (1 << 0) /* Bit 0: Data ready */
|
||||
|
||||
/* Modem Status Register MSR, address 0x15001018 */
|
||||
|
||||
#define UART_MSR_CTS (1 << 4) /* Bit 4: CTS is modem flow control signal */
|
||||
#define UART_MSR_DCTS (1 << 0) /* Bit 0: Delta Clear To Send */
|
||||
|
||||
/* Scratch Register SCR, address 0x1500101c */
|
||||
|
||||
#define UART_SCR_SCRVAL_SHIFT (0) /* Bits 0-7: Scratch Value */
|
||||
#define UART_SCR_SCRVAL_MASK (0xff << bb)
|
||||
|
||||
/* IrDA Control Register ICR, address 0x15001024 */
|
||||
|
||||
#define UART_ICR_PULSEDIV_SHIFT (3) /* Bits 3-5: Configures fixed pulse width mode */
|
||||
#define UART_ICR_PULSEDIV_MASK (7 << UART_ICR_PULSEDIV_SHIFT)
|
||||
#define UART_ICR_FIXPULSEEN (1 << 2) /* Bit 2: Enables IrDA fixed pulse width mode */
|
||||
#define UART_ICR_IRDAINV (1 << 1) /* Bit 1: Serial input is inverted */
|
||||
#define UART_ICR_IRDAEN (1 << 0) /* Bit 0: Enable IrDA */
|
||||
|
||||
/* Fractional Divider Register FDR, address 0x15001028 */
|
||||
|
||||
#define UART_FDR_MULVAL_SHIFT (4) /* Bits 4-7: Baud pre-scaler multiplier value */
|
||||
#define UART_FDR_MULVAL_MASK (15 << UART_FDR_MULVAL_SHIFT)
|
||||
#define UART_FDR_DIVADDVAL_SHIFT (0) /* Bits 0-3: Baud pre-scaler divisor value */
|
||||
#define UART_FDR_DIVADDVAL_MASK (15 << UART_FDR_DIVADDVAL_SHIFT)
|
||||
|
||||
/* NHP POP Register POP, address 0x15001030 */
|
||||
|
||||
#define UART_POP_POPRBR (1 << 0) /* Bit 0: Pop from RBR as if RBR read in non-NHP mode */
|
||||
|
||||
/* Mode Selection Register MODE, 0x15001034 */
|
||||
|
||||
#define UART_MODE_NHP (1 << 0) /* Bit 0: Enable UART NHP mode */
|
||||
|
||||
/* Interrupt Clear Enable Register INTCE, address 0x15001fd8
|
||||
* Interrupt Set Enable Register INTSE, address 0x15001fdc
|
||||
* Interrupt Status Register INTS, address 0x15001fe0
|
||||
* Interrupt Enable Register INTE, address 0x15001fe4
|
||||
* Interrupt Clear Status Register INTCS, address 0x15001fe8
|
||||
* Interrupt Set Status Register INTSS, address 0x15001fec
|
||||
*/
|
||||
|
||||
#define UART_OEINT (1 << 15) /* Bit 15: Overrun Error Interrupt */
|
||||
#define UART_PEINT (1 << 14) /* Bit 14: Parity Error Interrupt (not INTSS) */
|
||||
#define UART_FEINT (1 << 13) /* Bit 13: Frame Error Interrupt (not INTSS) */
|
||||
#define UART_BIINT (1 << 12) /* Bit 12: Break Indication Interrupt (not INTSS) */
|
||||
#define UART_ABTOINT (1 << 9) /* Bit 9: Auto-Baud Time-Out Interrupt */
|
||||
#define UART_ABEOINT (1 << 8) /* Bit 8: End of Auto-Baud Interrupt */
|
||||
#define UART_RXDAINT (1 << 6) /* Bit 6: Receiver Data Available Interrupt (not INTSS) */
|
||||
#define UART_RXTOINT (1 << 5) /* Bit 5: Receiver Time-Out Interrupt (not INTCE) */
|
||||
#define UART_THREINT (1 << 4) /* Bit 4: Transmitter Holding Register Empty Interrupt */
|
||||
#define UART_DCTSINT (1 << 0) /* Bit 0: Delta Clear To Send Interrupt */
|
||||
|
||||
|
||||
/************************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************************/
|
||||
|
||||
/************************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************************/
|
||||
|
||||
/************************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************************/
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_LPC313X_UART_H */
|
||||
Loading…
Reference in New Issue
Block a user