sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs/sama5d4-ek/bridge: Add a simple test for the dual EMACs on the SAMA5D4

Browse Source
This commit is contained in:
Gregory Nutt 2014-11-17 10:56:02 -06:00
parent 33627632a5
commit 031c06002b
4 changed files with 1349 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
configs/sama5d4-ek/README.txt
View File

@ -3588,6 +3588,8 @@ Configurations
AT25 serial FLASH (in particular, dramboot). See the description AT25 serial FLASH (in particular, dramboot). See the description
below and the section above entitled "Creating and Using AT25BOOT" below and the section above entitled "Creating and Using AT25BOOT"
for more information for more information
bridge: This is a simple testing that exercises EMAC0 and EMAC1 for
a simple UDP relay bridge test.
dramboot: This is a little program to help debug of code in DRAM. See dramboot: This is a little program to help debug of code in DRAM. See
the description below and the section above entitled "Creating and the description below and the section above entitled "Creating and
Using DRAMBOOT" for more information Using DRAMBOOT" for more information
@ -3635,6 +3637,41 @@ Configurations
not boot it! I believe that is because the secure boot loader has some not boot it! I believe that is because the secure boot loader has some
undocumented requirements that I am unaware of. (2014-6-28) undocumented requirements that I am unaware of. (2014-6-28)
bridge:
This is a simple testing that exercises EMAC0 and EMAC1 for a simple
UDP relay bridge test using apps/examples/bridge. See
apps/examples/README.txt for more information about this test.
NOTES:
1. This configuration uses the the USART3 for the serial console
which is available at the "DBGU" RS-232 connector (J24). That
is easily changed by reconfiguring to (1) enable a different
serial peripheral, and (2) selecting that serial peripheral as
the console device.
2. By default, this configuration is set up to build on Windows
under either a Cygwin or MSYS environment using a recent, Windows-
native, generic ARM EABI GCC toolchain (such as the CodeSourcery
toolchain). Both the build environment and the toolchain
selection can easily be changed by reconfiguring:
CONFIG_HOST_WINDOWS=y : Windows operating system
CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
If you are running on Linux, make *certain* that you have
CONFIG_HOST_LINUX=y *before* the first make or you will create a
corrupt configuration that may not be easy to recover from. See
the warning in the section "Information Common to All Configurations"
for further information.
STATUS:
2014-11-17: Configuration created. Not yet verified.
dramboot: dramboot:
This is a little program to help debug of code in DRAM. It does the This is a little program to help debug of code in DRAM. It does the

144
configs/sama5d4-ek/bridge/Make.defs Normal file
View File

@ -0,0 +1,144 @@
############################################################################
# configs/sama5d4-ek/bridge/Make.defs
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
LDSCRIPT = isram.ld
endif
ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
ifeq ($(CONFIG_SAMA5D4EK_DRAM_BOOT),y)
LDSCRIPT = dramboot.ld
else
LDSCRIPT = uboot.ld
endif
endif
ifeq ($(WINTOOL),y)
# Windows-native toolchains
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
# NXFLAT module definitions
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
# ELF module definitions
CELFFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
CXXELFFLAGS = $(CXXFLAGS) -mlong-calls # --target1-abs
LDELFFLAGS = -r -e main
ifeq ($(WINTOOL),y)
LDELFFLAGS += -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld}"
else
LDELFFLAGS += -T $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld
endif
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
ifeq ($(CONFIG_HOST_WINDOWS),y)
HOSTEXEEXT = .exe
else
HOSTEXEEXT =
endif
ifeq ($(WINTOOL),y)
# Windows-native host tools
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
else
# Linux/Cygwin-native host tools
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
endif

1091
configs/sama5d4-ek/bridge/defconfig Normal file
View File

File diff suppressed because it is too large Load Diff

77
configs/sama5d4-ek/bridge/setenv.sh Executable file
View File

@ -0,0 +1,77 @@
#!/bin/bash
# configs/sama5d4-ek/bridge/setenv.sh
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the Atmel GCC
# toolchain under Windows. You will also have to edit this if you install
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"