sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

drivers/sensors: add LTR308 ambient light sensor

Browse Source 
Add support for the LTR308 ambient light sensor through I2C. Currently,
the interrupt-driven mode of operation is not supported.

Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
This commit is contained in:
Robert-Ionut Alexa 2022-10-08 11:31:29 +03:00 committed by Xiang Xiao
parent 5f82e2aeac
commit 039262484a
4 changed files with 782 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
drivers/sensors/Kconfig
View File

@ -1144,4 +1144,36 @@ config HDC1008_DEBUG
Enables debug features for the HDC1008 Enables debug features for the HDC1008
endif # SENSORS_HDC1008 endif # SENSORS_HDC1008
config SENSORS_LTR308
bool "LTR308 Lite-On ambient light sensor"
default n
select I2C
---help---
Enable driver support for the LTR308 Lite-on ambient light sensor.
if SENSORS_LTR308
config SENSORS_LTR308_I2C_FREQUENCY
int "LTR308 I2C frequency"
default 400000
range 1 400000
config SENSORS_LTR308_POLL_INTERVAL
int "Polling interval in microseconds, default 1 sec"
depends on SENSORS_LTR308
default 1000000
range 0 4294967295
---help---
The interval until a new sensor measurement will be triggered.
config SENSORS_LTR308_THREAD_STACKSIZE
int "Worker thread stack size"
depends on SENSORS_LTR308
default 1024
---help---
The stack size for the worker thread.
endif # SENSORS_LTR308
endif # SENSORS endif # SENSORS

4
drivers/sensors/Make.defs
View File

@ -228,6 +228,10 @@ ifeq ($(CONFIG_SENSORS_T67XX),y)
CSRCS += t67xx.c CSRCS += t67xx.c
endif endif
ifeq ($(CONFIG_SENSORS_LTR308),y)
CSRCS += ltr308.c
endif
endif # CONFIG_I2C endif # CONFIG_I2C
# These drivers depend on SPI support # These drivers depend on SPI support

655
drivers/sensors/ltr308.c Normal file
View File

@ -0,0 +1,655 @@
/****************************************************************************
* drivers/sensors/ltr308.c
* Character driver for the LTR-308ALS-01 Lite-On ambient light sensor.
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <stdlib.h>
#include <debug.h>
#include <nuttx/nuttx.h>
#include <nuttx/kmalloc.h>
#include <nuttx/kthread.h>
#include <nuttx/signal.h>
#include <nuttx/fs/fs.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/sensors/sensor.h>
#include <nuttx/sensors/ltr308.h>
#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_LTR308)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define LTR308_ADDR 0x53
#define DEVID 0xB1
#define LTR308_CTRL 0x00
#define LTR308_MEAS_RATE 0x04
#define LTR308_ALS_GAIN 0x05
#define LTR308_PART_ID 0x06
#define LTR308_STATUS 0x07
#define LTR308_DATA_0 0x0D
/****************************************************************************
* Private Type Definitions
****************************************************************************/
struct ltr308_sensor_s
{
struct sensor_lowerhalf_s lower; /* Common lower interface */
uint8_t integration_time; /* The interval between 2 ALS cycles */
uint8_t measurement_rate; /* The interval between 2 data updates */
uint8_t gain; /* Sensor gain */
};
struct ltr308_dev_s
{
struct ltr308_sensor_s dev; /* Sensor private data */
FAR struct i2c_master_s *i2c; /* I2C interface */
mutex_t dev_lock; /* Manages exclusive access to the device */
sem_t run; /* Locks sensor thread */
bool enabled; /* Enable/Disable LTR308 */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int ltr308_activate(FAR struct sensor_lowerhalf_s *lower,
FAR struct file *filep, bool enabled);
static int ltr308_calibrate(FAR struct sensor_lowerhalf_s *lower,
FAR struct file *filep,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct sensor_ops_s g_sensor_ops =
{
NULL, /* open */
NULL, /* close */
ltr308_activate, /* activate */
NULL, /* set_interval */
NULL, /* batch */
NULL, /* fetch */
NULL, /* selftest */
NULL, /* set_calibvalue */
ltr308_calibrate, /* calibrate */
NULL /* control */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: ltr308_set_reg8
*
* Description:
* Write to an 8-bit LTR308 register
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_set_reg8(FAR struct ltr308_dev_s *priv, uint8_t regaddr,
uint8_t regval)
{
struct i2c_msg_s msg;
uint8_t txbuffer[2];
int ret;
txbuffer[0] = regaddr;
txbuffer[1] = regval;
msg.frequency = CONFIG_SENSORS_LTR308_I2C_FREQUENCY;
msg.addr = LTR308_ADDR;
msg.flags = 0;
msg.buffer = txbuffer;
msg.length = 2;
ret = I2C_TRANSFER(priv->i2c, &msg, 1);
if (ret < 0)
{
snerr("I2C_TRANSFER failed (err = %d)\n", ret);
}
return ret;
}
/****************************************************************************
* Name: ltr308_get_reg8
*
* Description:
* Read from an 8-bit LTR308 register
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_get_reg8(FAR struct ltr308_dev_s *priv, uint8_t regaddr,
FAR uint8_t *regval)
{
struct i2c_msg_s msg[2];
int ret;
msg[0].frequency = CONFIG_SENSORS_LTR308_I2C_FREQUENCY;
msg[0].addr = LTR308_ADDR;
msg[0].flags = 0;
msg[0].buffer = &regaddr;
msg[0].length = 1;
msg[1].frequency = CONFIG_SENSORS_LTR308_I2C_FREQUENCY;
msg[1].addr = LTR308_ADDR;
msg[1].flags = I2C_M_READ;
msg[1].buffer = regval;
msg[1].length = 1;
ret = I2C_TRANSFER(priv->i2c, msg, 2);
if (ret < 0)
{
snerr("ERROR: I2C_TRANSFER failed (err = %d)\n", ret);
}
return ret;
}
/****************************************************************************
* Name: ltr308_get_reg24
*
* Description:
* Read from 3 8-bit LTR308 registers
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_get_reg24(FAR struct ltr308_dev_s *priv, uint8_t regaddr,
FAR uint32_t *val)
{
int ret;
int i;
*val = 0;
for (i = 0; i < 3; i++, regaddr++)
{
ret = ltr308_get_reg8(priv, regaddr, ((uint8_t *)val) + i);
if (ret < 0)
{
return ret;
}
}
return ret;
}
/****************************************************************************
* Name: ltr308_checkid
*
* Description:
* Read and verify the LTR308 chip ID
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_checkid(FAR struct ltr308_dev_s *priv)
{
uint8_t devid;
int ret;
/* Read device ID */
ret = ltr308_get_reg8(priv, LTR308_PART_ID, &devid);
if (ret < 0)
{
return ret;
}
sninfo("devid: 0x%02x\n", devid);
return (devid != DEVID) ? -ENODEV : OK;
}
/****************************************************************************
* Name: ltr308_get_status
*
* Description:
* Get the status information of LTR308
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_get_status(FAR struct ltr308_dev_s *priv,
FAR bool *power_on,
FAR bool *interrupt_pending,
FAR bool *data_pending)
{
uint8_t status;
uint8_t ret;
ret = ltr308_get_reg8(priv, LTR308_STATUS, &status);
if (ret < 0)
{
return ret;
}
if (power_on != NULL)
{
*power_on = status & 0x20;
}
if (interrupt_pending != NULL)
{
*interrupt_pending = status & 0x10;
}
if (data_pending != NULL)
{
*data_pending = status & 0x08;
}
return ret;
}
/****************************************************************************
* Name: ltr308_get_lux
*
* Description:
* Convert raw data to lux
* @gain: see ltr308_calibrate()
* @integration_time: see ltr308_calibrate()
* @ch: result from ltr308_get_data()
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_get_lux(FAR struct ltr308_dev_s *priv, uint8_t gain,
uint8_t integration_time, uint32_t data,
FAR float *lux)
{
float d0;
/* Determine if sensor is saturated. If so, abandon ship (calculation will
* not be accurate)
*/
if (data == 0x000fffff)
{
*lux = 0.0;
return -ENODATA;
}
d0 = ((float)data * 0.6);
switch (gain)
{
case 0:
break;
case 1:
d0 /= 3;
break;
case 2:
d0 /= 6;
break;
case 3:
d0 /= 9;
break;
case 4:
d0 /= 18;
break;
default:
d0 = 0.0;
break;
}
switch (integration_time)
{
case 0:
*lux = d0 / 4;
break;
case 1:
*lux = d0 / 2;
break;
case 2:
*lux = d0;
break;
case 3:
*lux = d0 * 2;
break;
case 4:
*lux = d0 * 4;
break;
default:
*lux = 0.0;
break;
}
return 0;
}
/****************************************************************************
* Name: ltr308_activate
*
* Description:
* Enable/Disable LTR308 sensor
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_activate(FAR struct sensor_lowerhalf_s *lower,
FAR struct file *filep, bool enabled)
{
FAR struct ltr308_sensor_s *dev = container_of(lower,
FAR struct ltr308_sensor_s,
lower);
FAR struct ltr308_dev_s *priv = container_of(dev,
FAR struct ltr308_dev_s,
dev);
int ret;
ret = ltr308_set_reg8(priv, LTR308_CTRL, enabled << 1);
if (ret < 0)
{
snerr("ERROR: Could not enable sensor\n");
return ret;
}
priv->enabled = enabled;
if (enabled == true)
{
/* Wake up the polling thread */
nxsem_post(&priv->run);
}
return OK;
}
/****************************************************************************
* Name: ltr308_calibrate
*
* Description:
* Set the integration time, measurement rate and gain of LTR308
* @integration_time - the measurement time for each ALS cycle
* @measurement_rate - the interval between DATA_REGISTERS update. Must be
* set to be equal or greater than integration time
* @gain - the sensor gain
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_calibrate(FAR struct sensor_lowerhalf_s *lower,
FAR struct file *filep,
unsigned long arg)
{
FAR struct ltr308_sensor_s *dev = container_of(lower,
FAR struct ltr308_sensor_s,
lower);
FAR struct ltr308_dev_s *priv = container_of(dev,
FAR struct ltr308_dev_s,
dev);
FAR struct ltr308_calibval *calibval =
(FAR struct ltr308_calibval *) arg;
uint8_t measurement = 0;
int ret;
/* Sanity checks */
if (calibval->integration_time >= 5)
{
calibval->integration_time = 0;
}
if (calibval->measurement_rate >= 6 || calibval->measurement_rate == 4)
{
calibval->measurement_rate = 0;
}
if (calibval->gain >= 5)
{
calibval->gain = 0;
}
/* Do not overwrite if the values have not been modified */
nxmutex_lock(&priv->dev_lock);
if (dev->integration_time != calibval->integration_time ||
dev->measurement_rate != calibval->measurement_rate)
{
dev->integration_time = calibval->integration_time;
dev->measurement_rate = calibval->measurement_rate;
measurement |= calibval->integration_time << 4;
measurement |= calibval->measurement_rate;
ret = ltr308_set_reg8(priv, LTR308_MEAS_RATE, measurement);
if (ret < 0)
{
goto err_out;
}
}
if (dev->gain != calibval->gain)
{
dev->gain = calibval->gain;
ret = ltr308_set_reg8(priv, LTR308_ALS_GAIN, calibval->gain);
if (ret < 0)
{
goto err_out;
}
}
nxmutex_unlock(&priv->dev_lock);
return OK;
err_out:
nxmutex_unlock(&priv->dev_lock);
snerr("ERROR: Failed to calibrate sensor\n");
return ret;
}
/****************************************************************************
* Name: ltr308_thread
*
* Description:
* Thread for performing data readings at fixed intervals, defined by
* CONFIG_SENSORS_LTR308_POLL_INTERVAL
* @argc - Number of arguments
* @argv - Pointer to argument list
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
static int ltr308_thread(int argc, char** argv)
{
FAR struct ltr308_dev_s *priv = (FAR struct ltr308_dev_s *)
((uintptr_t)strtoul(argv[1], NULL, 0));
struct sensor_light light;
uint32_t data = 0;
bool data_pending;
float lux;
int ret;
while (true)
{
if (priv->enabled == false)
{
/* Wait for the sensor to be enabled */
nxsem_wait(&priv->run);
}
/* Read the data registers and sleep if no change is detected
* or the sensor is saturated
*/
ret = ltr308_get_status(priv, NULL, NULL, &data_pending);
if (ret < 0)
{
snerr("ERROR: Failed to read sensor's status\n");
return ret;
}
if (data_pending == false)
{
goto thread_sleep;
}
ret = ltr308_get_reg24(priv, LTR308_DATA_0, &data);
if (ret < 0)
{
snerr("ERROR: Failed to read data from sensor\n");
return ret;
}
ret = ltr308_get_lux(priv, priv->dev.gain, priv->dev.integration_time,
data, &lux);
if (ret < 0)
{
goto thread_sleep;
}
light.timestamp = sensor_get_timestamp();
light.light = lux;
priv->dev.lower.push_event(priv->dev.lower.priv, &light,
sizeof(struct sensor_light));
thread_sleep:
nxsig_usleep(CONFIG_SENSORS_LTR308_POLL_INTERVAL);
}
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: ltr308_register
*
* Description:
* Register the LTR308 character device
* @devno - The user-specified device number, starting from 0
* @i2c - An instance of the I2C interface to use to communicate with
* LTR308
*
* Return value:
* Zero (OK) on success; a negated errno value on failure
****************************************************************************/
int ltr308_register(int devno, FAR struct i2c_master_s *i2c)
{
FAR struct sensor_lowerhalf_s *lower;
FAR struct ltr308_dev_s *priv;
FAR char *argv[2];
char arg1[32];
int ret = OK;
DEBUGASSERT(i2c != NULL);
/* Initialize the LTR308 device structure */
priv = (FAR struct ltr308_dev_s *)kmm_zalloc(sizeof(struct ltr308_dev_s));
if (priv == NULL)
{
snerr("ERROR: Failed to allocate instance (err = %d)\n", ret);
return -ENOMEM;
}
priv->i2c = i2c;
priv->enabled = false;
nxmutex_init(&priv->dev_lock);
nxsem_init(&priv->run, 0, 0);
/* Check Device ID */
ret = ltr308_checkid(priv);
if (ret < 0)
{
snerr("ERROR: Wrong device ID!\n");
goto err_init;
}
/* Register the character driver */
lower = &priv->dev.lower;
lower->ops = &g_sensor_ops;
lower->type = SENSOR_TYPE_LIGHT;
ret = sensor_register(lower, 0);
if (ret < 0)
{
snerr("ERROR: Failed to register driver (err = %d)\n", ret);
goto err_init;
}
/* Create thread for polling sensor data */
snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)priv);
argv[0] = arg1;
argv[1] = NULL;
ret = kthread_create("ltr308_thread", SCHED_PRIORITY_DEFAULT,
CONFIG_SENSORS_LTR308_THREAD_STACKSIZE,
ltr308_thread, argv);
if (ret < 0)
{
snerr("ERROR: Failed to create poll thread (err = %d)\n", ret);
goto err_register;
}
sninfo("LTR308 driver loaded successfully!\n");
return OK;
err_register:
sensor_unregister(lower, 0);
err_init:
nxsem_destroy(&priv->run);
nxmutex_destroy(&priv->dev_lock);
kmm_free(priv);
return ret;
}
#endif /* CONFIG_I2C && CONFIG_SENSORS_LTR308 */

91
include/nuttx/sensors/ltr308.h Normal file
View File

@ -0,0 +1,91 @@
/****************************************************************************
* include/nuttx/sensors/ltr308.h
* Character driver for the LTR-308ALS-01 Lite-On ambient light sensor.
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_SENSORS_LTR308_H
#define __INCLUDE_NUTTX_SENSORS_LTR308_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/sensors/ioctl.h>
/* Configuration ************************************************************
* Prerequisites:
*
* CONFIG_I2C
* Enables support for I2C drivers
* CONFIG_SENSORS_LTR308
* Enables support for the LTR308 driver
*/
#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_LTR308)
/****************************************************************************
* Public Types
****************************************************************************/
struct i2c_master_s;
struct ltr308_calibval
{
uint8_t integration_time;
uint8_t measurement_rate;
uint8_t gain;
};
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: ltr308_register
*
* Description:
* Register the LTR308 character device as 'devpath'.
*
* Input Parameters:
* devno - Number of device (i.e. ltr0, ltr1, ...)
* i2c - An I2C driver instance.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
int ltr308_register(int devno, FAR struct i2c_master_s *i2c);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_I2C && CONFIG_SENSORS_LTR308 */
#endif /* __INCLUDE_NUTTX_SENSORS_LTR308_H */