diff --git a/configs/Kconfig b/configs/Kconfig index 3346f5f9bc..d76659a3f1 100644 --- a/configs/Kconfig +++ b/configs/Kconfig @@ -372,6 +372,14 @@ config ARCH_BOARD_OLIMEXLPC2378 Linux or Cygwin. STATUS: ostest and NSH configurations available. This port for the NXP LPC2378 was contributed by Rommel Marcelo. +config ARCH_BOARD_OLIMEX_LPC_H3131 + bool "Olimex LPC-H3131 Development board" + depends on ARCH_CHIP_LPC3131 + select ARCH_HAVE_LEDS + ---help--- + Olimex LPC-H3131 development board. This board is based on the the + NXP LPC3131 MCU. + config ARCH_BOARD_OLIMEX_STRP711 bool "Olimex STR-P711 board" depends on ARCH_CHIP_STR71X @@ -848,6 +856,7 @@ config ARCH_BOARD default "nutiny-nuc120" if ARCH_BOARD_NUTINY_NUC120 default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378 + default "olimex-lpc-h3131" if ARCH_BOARD_OLIMEX_LPC_H3131 default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107 default "olimex-stm32-p207" if ARCH_BOARD_OLIMEX_STM32P207 default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711 @@ -1062,6 +1071,9 @@ endif if ARCH_BOARD_OLIMEXLPC2378 source "configs/olimex-lpc2378/Kconfig" endif +if ARCH_BOARD_OLIMEX_LPC_H3131 +source "configs/olimex-lpc-h3131/Kconfig" +endif if ARCH_BOARD_OLIMEX_STM32P107 source "configs/olimex-stm32-p107/Kconfig" endif diff --git a/configs/ea3131/nsh/setenv.sh b/configs/ea3131/nsh/setenv.sh index f3cacc7c46..0206c686e9 100755 --- a/configs/ea3131/nsh/setenv.sh +++ b/configs/ea3131/nsh/setenv.sh @@ -58,7 +58,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ # This is the path to the tools subdirectory -export LPCTOOL_DIR="${WD}/configs/ea3152/tools" +export LPCTOOL_DIR="${WD}/configs/ea3131/tools" # Add the path to the toolchain to the PATH varialble diff --git a/configs/ea3131/ostest/setenv.sh b/configs/ea3131/ostest/setenv.sh index 2c3453d070..2e3b315ae6 100755 --- a/configs/ea3131/ostest/setenv.sh +++ b/configs/ea3131/ostest/setenv.sh @@ -58,7 +58,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ # This is the path to the tools subdirectory -export LPCTOOL_DIR="${WD}/configs/ea3152/tools" +export LPCTOOL_DIR="${WD}/configs/ea3131/tools" # Add the path to the toolchain to the PATH varialble diff --git a/configs/ea3131/pgnsh/setenv.sh b/configs/ea3131/pgnsh/setenv.sh index adec8bc780..17afa39df9 100755 --- a/configs/ea3131/pgnsh/setenv.sh +++ b/configs/ea3131/pgnsh/setenv.sh @@ -58,7 +58,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ # This is the path to the tools subdirectory -export LPCTOOL_DIR="${WD}/configs/ea3152/tools" +export LPCTOOL_DIR="${WD}/configs/ea3131/tools" # Add the path to the toolchain to the PATH varialble diff --git a/configs/ea3131/usbmsc/setenv.sh b/configs/ea3131/usbmsc/setenv.sh index 131d288067..de7b4b2135 100755 --- a/configs/ea3131/usbmsc/setenv.sh +++ b/configs/ea3131/usbmsc/setenv.sh @@ -58,7 +58,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ # This is the path to the tools subdirectory -export LPCTOOL_DIR="${WD}/configs/ea3152/tools" +export LPCTOOL_DIR="${WD}/configs/ea3131/tools" # Add the path to the toolchain to the PATH varialble diff --git a/configs/ea3131/usbserial/setenv.sh b/configs/ea3131/usbserial/setenv.sh index 51d3d5250b..01a5dde2a3 100755 --- a/configs/ea3131/usbserial/setenv.sh +++ b/configs/ea3131/usbserial/setenv.sh @@ -58,7 +58,7 @@ export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ # This is the path to the tools subdirectory -export LPCTOOL_DIR="${WD}/configs/ea3152/tools" +export LPCTOOL_DIR="${WD}/configs/ea3131/tools" # Add the path to the toolchain to the PATH varialble diff --git a/configs/olimex-lpc-h3131/Kconfig b/configs/olimex-lpc-h3131/Kconfig new file mode 100644 index 0000000000..d48cc4bb68 --- /dev/null +++ b/configs/olimex-lpc-h3131/Kconfig @@ -0,0 +1,7 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +if ARCH_BOARD_OLIMEX_LPC_H3131 +endif diff --git a/configs/olimex-lpc-h3131/README.txt b/configs/olimex-lpc-h3131/README.txt new file mode 100644 index 0000000000..d3cce7b5c1 --- /dev/null +++ b/configs/olimex-lpc-h3131/README.txt @@ -0,0 +1,528 @@ +README +====== + + This README file discusses the port of NuttX to the Olimex LPC-H3131 board. + +Contents +======== + + o Development Environment + o GNU Toolchain Options + o IDEs + o NuttX buildroot Toolchain + o Boot Sequence + o Buttons and LEDs + o Image Format + o Image Download to ISRAM + o Using OpenOCD and GDB + o ARM/LPC-H3131-specific Configuration Options + o Configurations + +Development Environment +======================= + + Either Linux or Cygwin on Windows can be used for the development environment. + The source has been built only using the GNU toolchain (see below). Other + toolchains will likely cause problems. + +GNU Toolchain Options +===================== + + The NuttX make system has been modified to support the following different + toolchain options. + + 1. The CodeSourcery GNU toolchain, + 2. The devkitARM GNU toolchain, + 3. Raisonance GNU toolchain, + 4. The NuttX buildroot Toolchain (see below), or + 5. Any generic arm-none-eabi GNU toolchain. + + All testing has been conducted using the NuttX buildroot toolchain. However, + the make system is setup to default to use the devkitARM toolchain. To use + the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to + add one of the following configuration options to your .config (or defconfig) + file: + + CONFIG_ARM_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_ARM_TOOLCHAIN_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_ARM_TOOLCHAIN_DEVKITARM=y : devkitARM under Windows + CONFIG_ARM_TOOLCHAIN_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + CONFIG_ARM_TOOLCHAIN_GNU_EABIL : Generic arm-none-eabi toolchain for Linux + CONFIG_ARM_TOOLCHAIN_GNU_EABIW : Generic arm-none-eabi toolchain for Windows + + If you are not using CONFIG_ARM_TOOLCHAIN_BUILDROOT, then you may also have to modify + the PATH in the setenv.h file if your make cannot find the tools. + + The toolchain may also be set using the kconfig-mconf utility (make menuconfig) or by + passing CONFIG_ARM_TOOLCHAIN= to make, where is one + of CODESOURCERYW, CODESOURCERYL, DEVKITARM, BUILDROOT or GNU_EABI as described + above. + + NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are + Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot + toolchains are Cygwin and/or Linux native toolchains. There are several limitations + to using a Windows based toolchain in a Cygwin environment. The three biggest are: + + 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are + performed automatically in the Cygwin makefiles using the 'cygpath' utility + but you might easily find some new path problems. If so, check out 'cygpath -w' + + 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links + are used in Nuttx (e.g., include/arch). The make system works around these + problems for the Windows tools by copying directories instead of linking them. + But this can also cause some confusion for you: For example, you may edit + a file in a "linked" directory and find that your changes had no effect. + That is because you are building the copy of the file in the "fake" symbolic + directory. If you use a Windows toolchain, you should get in the habit of + making like this: + + make clean_context all + + An alias in your .bashrc file might make that less painful. + + 3. Dependencies are not made when using Windows versions of the GCC. This is + because the dependencies are generated using Windows pathes which do not + work with the Cygwin make. + + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + + NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization + level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with + -Os. + + NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that + the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM + path or will get the wrong version of make. + + Generic arm-none-eabi GNU Toolchain + ----------------------------------- + There are a number of toolchain projects providing support for ARMv4/v5 + class processors, including: + + GCC ARM Embedded + https://launchpad.net/gcc-arm-embedded + + Summon ARM Toolchain + https://github.com/esden/summon-arm-toolchain + + Yagarto + http://www.yagarto.de + + Others exist for various Linux distributions, MacPorts, etc. Any version + based on GCC 4.6.3 or later should work. + +IDEs +==== + + NuttX is built using command-line make. It can be used with an IDE, but some + effort will be required to create the project (There is a simple RIDE project + in the RIDE subdirectory). + + Makefile Build + -------------- + Under Eclipse, it is pretty easy to set up an "empty makefile project" and + simply use the NuttX makefile to build the system. That is almost for free + under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty + makefile project in order to work with Windows (Google for "Eclipse Cygwin" - + there is a lot of help on the internet). + + Native Build + ------------ + Here are a few tips before you start that effort: + + 1) Select the toolchain that you will be using in your .config file + 2) Start the NuttX build at least one time from the Cygwin command line + before trying to create your project. This is necessary to create + certain auto-generated files and directories that will be needed. + 3) Set up include pathes: You will need include/, arch/arm/src/lpc31xx, + arch/arm/src/common, arch/arm/src/arm, and sched/. + 4) All assembly files need to have the definition option -D __ASSEMBLY__ + on the command line. + + Startup files will probably cause you some headaches. The NuttX startup file + is arch/arm/src/lpc31xx/lpc31_vectors.S. With RIDE, I have to build NuttX + one time from the Cygwin command line in order to obtain the pre-built + startup object needed by RIDE. + +NuttX buildroot Toolchain +========================= + + A GNU GCC-based toolchain is assumed. The files */setenv.sh should + be modified to point to the correct path to the Cortex-M3 GCC toolchain (if + different from the default in your PATH variable). + + If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX + SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/). + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in /nuttx. + + cd tools + ./configure.sh olimex-lpc-h3131/ + + 2. Download the latest buildroot package into + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename /buildroot-x.y.z to /buildroot. + + 4. cd /buildroot + + 5. cp configs/arm926t-defconfig-4.2.4 .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly built binaries. + + See the file configs/README.txt in the buildroot source tree. That has more + detailed PLUS some special instructions that you will need to follow if you are + building a Cortex-M3 toolchain for Cygwin under Windows. + +Boot Sequence +============= + + LPC313x has on chip bootrom which loads properly formatted images from multiple + sources into SRAM. These sources include including SPI Flash, NOR Flash, UART, + USB, SD Card, and NAND Flash. + + In all configurations, NuttX is loaded directly into ISRAM. NuttX is linked + to execute from ISRAM, regardless of the boot source. + +Buttons and LEDs +================ + + Buttons + ------- + + There are not user buttons on the H3131 + + LEDs + ---- + + There are two LEDs on the LPC-H3131 that can be controlled by software: + + LED GPIO + ---------------- ----- + LED1 Yellow GPIO17 High output illuminates + LED2 Green GPIO18 High output illuminates + + Both can be illuminated by driving the GPIO output to high. + + These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is + defined. In that case, the usage by the board port is defined in + include/board.h and src/lpc31_leds.c. The LEDs are used to encode + OS-related events as follows: + + SYMBOL Meaning LED state + LED2 LED1 + ------------------- ----------------------- -------- -------- + LED_STARTED NuttX has been started OFF OFF + LED_HEAPALLOCATE Heap has been allocated OFF OFF + LED_IRQSENABLED Interrupts enabled OFF OFF + LED_STACKCREATED Idle stack created ON OFF + LED_INIRQ In an interrupt N/C N/C + LED_SIGNAL In a signal handler N/C N/C + LED_ASSERTION An assertion failed N/C N/C + LED_PANIC The system has crashed N/C Blinking + LED_IDLE MCU is is sleep mode Not used + + Thus if LED2 is statically on, NuttX has successfully booted and is, + apparently, running normmally. If LED1 is flashing at approximately + 2Hz, then a fatal error has been detected and the system has halted. + + NOTE: That LED2 is not used after completion of booting and may + be used by other board-specific logic. + +Image Format +============ + + In order to use the bootrom bootloader, a special header must be added to the + beginning of the binary image that includes information about the binary (things + like the entry point, the size, and CRC's to verify the image. + + NXP provides a Windows program to append such a header to the binary image. + However, (1) that program won't run under Linux, and (2) when I try it under + WinXP, Symantec immediately claims that the program is misbehaving and deletes + it! + + To work around both of these issues, I have created a small program under + configs/olimex-lpc-h3131/tools to add the header. This program can be built under + either Linux or Cygwin (and probably other tool environments as well). That + tool can be built as follows: + + - cd configs/olimex-lpc-h3131/tools + - make + + Then, to build the NuttX binary ready to load with the bootloader, just + following these steps: + + - cd tools/ # Configure Nuttx + - ./configure.sh olimex-lpc-h3131/ostest # (using the ostest configuration for this example) + - cd .. # Set up environment + - . ./setenv.sh # (see notes below) + - make # Make NuttX. This will produce nuttx.bin + - mklpc.sh # Make the bootloader binary (nuttx.lpc) + + NOTES: + + 1. setenv.sh just sets up pathes to the toolchain and also to + configs/olimex-lpc-h3131/tools where mklpc.sh resides. Use of setenv.sh is optional. + If you don't use setenv.sh, then just set your PATH variable appropriately or + use the full path to mklpc.sh in the final step. + 2. You can instruct Symantec to ignore the errors and it will stop quarantining + the NXP program. + 3. The CRC32 logic in configs/olimex-lpc-h3131/tools doesn't seem to work. As a result, + the CRC is currently disabled in the header: + + RCS file: /cvsroot/nuttx/nuttx/configs/olimex-lpc-h3131/tools/lpchdr.c,v + retrieving revision 1.2 + diff -r1.2 lpchdr.c + 264c264 + < g_hdr.imageType = 0x0000000b; + --- + > g_hdr.imageType = 0x0000000a; + +Image Download to ISRAM +======================= + +Assuming that you already have the FTDI driver installed*, then here is the +are the steps that I use for loading new code into the LPC-H3131: + +- Create the bootloader binary, nuttx.lpc, as described above. +- Connected the LPC-H3131 using the FTDI USB port (not the lpc3131 USB port) + This will power up the LPC-H3131 and start the bootloader. +- Start a terminal emulator (such as TeraTerm) at 115200 8NI. +- Reset the LPC-H3131 and you should see: + LPC31xx READY FOR PLAIN IMAGE> +- Send the nuttx.lpc file and you should see: + Download finished + +That will load the NuttX binary into ISRAM and attempt to execute it. + +*See the LPC313x documentation if you do not have the FTDI driver installed. + +Using OpenOCD and GDB +===================== + [NOTE: As of this writing, my OpenOCD script does NOT work. It fails + because it is unable to halt the LPC3131. So, unfortunately, OpenOCD + is not a option right now.] + + I have been using the Olimex ARM-USB-OCD JTAG debugger with the LPC-H3131 + (http://www.olimex.com). The OpenOCD configuration file is here: + tools/armusbocb.cfg. There is also a script on the tools directory that + I used to start the OpenOCD daemon on my system called oocd.sh. That + script would probably require some modifications to work in another + environment: + + - possibly the value of OPENOCD_PATH + - If you are working under Linux you will need to change any + occurances of `cygpath -w blablabla` to just blablabla + + Then you should be able to start the OpenOCD daemon like: + + configs/olimex-lpc-h3131/tools/oocd.sh $PWD + + Where it is assumed that you are executing oocd.sh from the top level + directory where NuttX is installed. + + Once the OpenOCD daemon has been started, you can connect to it via + GDB using the following GDB command: + + arm-nuttx-elf-gdb + (gdb) target remote localhost:3333 + + And you can load the NuttX ELF file: + + (gdb) symbol-file nuttx + (gdb) load nuttx + +ARM/LPC-H3131-specific Configuration Options +============================================ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_family - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_architecture - For use in C code: + + CONFIG_ARCH_ARM926EJS=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=lpc313x + + CONFIG_ARCH_CHIP_name - For use in C code + + CONFIG_ARCH_CHIP_LPC3131 + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD="olimex-lpc-h3131" + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_OLIMEX_LPC_H3131 + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_RAM_SIZE - For most ARM9 architectures, this describes the + size of installed DRAM. For the LPC313X, it is used only to + deterimine how to map the executable regions. It is SDRAM size + only if you are executing out of the external SDRAM; or it could + be NOR FLASH size, external SRAM size, or internal SRAM size. + + CONFIG_RAM_START - The start address of installed DRAM (physical) + + CONFIG_RAM_VSTART - The startaddress of DRAM (virtual) + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. + + CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. + + CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that + cause a 100 second delay during boot-up. This 100 second delay + serves no purpose other than it allows you to calibratre + CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure + the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + CONFIG_ARCH_DMA - Support DMA initialization + CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 + Undefine if vectors reside at address 0xffff:0000 + CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. + If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, + PGTABLE_BASE_VADDR, and all memory section mapping in a file named + board_memorymap.h. + + Individual subsystems can be enabled: + + CONFIG_LPC31_MCI, CONFIG_LPC31_SPI, CONFIG_LPC31_UART + + External memory available on the board (see also CONFIG_MM_REGIONS) + + CONFIG_LPC31_EXTSRAM0 - Select if external SRAM0 is present + CONFIG_LPC31_EXTSRAM0HEAP - Select if external SRAM0 should be + configured as part of the NuttX heap. + CONFIG_LPC31_EXTSRAM0SIZE - Size (in bytes) of the installed + external SRAM0 memory + CONFIG_LPC31_EXTSRAM1 - Select if external SRAM1 is present + CONFIG_LPC31_EXTSRAM1HEAP - Select if external SRAM1 should be + configured as part of the NuttX heap. + CONFIG_LPC31_EXTSRAM1SIZE - Size (in bytes) of the installed + external SRAM1 memory + CONFIG_LPC31_EXTDRAM - Select if external SDRAM is present + CONFIG_LPC31_EXTDRAMHEAP - Select if external SDRAM should be + configured as part of the NuttX heap. + CONFIG_LPC31_EXTDRAMSIZE - Size (in bytes) of the installed + external SDRAM memory + CONFIG_LPC31_EXTNAND - Select if external NAND is present + CONFIG_LPC31_EXTNANDSIZE - Size (in bytes) of the installed + external NAND memory + + LPC313X specific device driver settings + + CONFIG_UART_SERIAL_CONSOLE - selects the UART for the + console and ttys0 + CONFIG_UART_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_UART_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_UART_BAUD - The configure BAUD of the UART. Must be + CONFIG_UART_BITS - The number of bits. Must be either 7 or 8. + CONFIG_UART_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_UART_2STOP - Two stop bits + +Configurations +============== + +Configurations +============== + + Information Common to All Configurations + ---------------------------------------- + Each LPC-H3131 configuration is maintained in a sub-directory and can be + selected as follow: + + cd tools + ./configure.sh olimex-lpc-h3131/ + cd - + . ./setenv.sh + + Before sourcing the setenv.sh file above, you should examine it and perform + edits as necessary so that TOOLCHAIN_BIN is the correct path to the directory + than holds your toolchain binaries. + + And then build NuttX by simply typing the following. At the conclusion of + the make, the nuttx binary will reside in an ELF file called, simply, nuttx. + + make + + The that is provided above as an argument to the tools/configure.sh + must be is one of the following. + + NOTES: + + 1. These configurations use the mconf-based configuration tool. To + change any of these configurations using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Unless stated otherwise, all configurations generate console + output on the UART0 associated with the FT232RL USB-to UART + converter. + + 3. Unless otherwise stated, the configurations are setup for + Windows undery Cygwin. This can, however, be easilty reconfigured. + + 4. All of these configurations use the Code Sourcery for Windows toolchain + (unless stated otherwise in the description of the configuration). That + toolchain selection can easily be reconfigured using 'make menuconfig'. + Here are the relevant current settings: + + Build Setup: + CONFIG_HOST_WINDOS=y : Microsoft Windows + CONFIG_WINDOWS_CYGWIN=y : Using Cygwin or other POSIX environment + + System Type -> Toolchain: + CONFIG_ARM_TOOLCHAIN_GNU_EABIW=y : GNU EABI toolchain for windows + + The setenv.sh file is available for you to use to set the PATH + variable. The path in the that file may not, however, be correct + for your installation. + + Configuration sub-directories + ----------------------------- + + nsh: + Configures the NuttShell (nsh) located at examples/nsh. The + Configuration enables only the serial NSH interface. diff --git a/configs/olimex-lpc-h3131/include/board.h b/configs/olimex-lpc-h3131/include/board.h new file mode 100644 index 0000000000..e2181dc1b5 --- /dev/null +++ b/configs/olimex-lpc-h3131/include/board.h @@ -0,0 +1,166 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/include/board.h + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_OLIMEX_LPC_H3131_INCLUDE_BOARD_H +#define __CONFIGS_OLIMEX_LPC_H3131_INCLUDE_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include +#ifndef __ASSEMBLY__ +# include +# include "lpc31_cgudrvr.h" +#endif + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ +/* Frequency of the FFAST input */ + +#define BOARD_FREQIN_FFAST (12000000) /* ffast (12 MHz crystal) */ + +/* HPLL0 configuration */ + +#define BOARD_HPLL0_FINSEL CGU_HPFINSEL_FFAST /* Frequency input selection */ +#define BOARD_HPLL0_NDEC 131 /* PLL N-divider value */ +#define BOARD_HPLL0_MDEC 29784 /* PLL M-divider value */ +#define BOARD_HPLL0_PDEC 7 /* PLL P-divider value */ +#define BOARD_HPLL0_SELR 0 /* SELR bandwidth selection */ +#define BOARD_HPLL0_SELI 8 /* SELI bandwidth selection */ +#define BOARD_HPLL0_SELP 31 /* SELP bandwidth selection */ +#define BOARD_HPLL0_MODE 0 /* PLL mode */ +#define BOARD_HPLL0_FREQ 406425600 /* Frequency of the PLL in MHz */ + +/* HPLL1 configuration */ + +#define BOARD_HPLL1_FINSEL CGU_HPFINSEL_FFAST /* Frequency input selection */ +#define BOARD_HPLL1_NDEC 770 /* PLL N-divider value */ +#define BOARD_HPLL1_MDEC 8191 /* PLL M-divider value */ +#define BOARD_HPLL1_PDEC 98 /* PLL P-divider value */ +#define BOARD_HPLL1_SELR 0 /* SELR bandwidth selection */ +#define BOARD_HPLL1_SELI 16 /* SELI bandwidth selection */ +#define BOARD_HPLL1_SELP 8 /* SELP bandwidth selection */ +#define BOARD_HPLL1_MODE 0 /* PLL mode */ +#define BOARD_HPLL1_FREQ 180000000 /* Frequency of the PLL in MHz */ + +/* The following 3 bitsets determine which clocks will be enabled at initialization + * time. + */ + +#define BOARD_CLKS_0_31 \ + (_RBIT(CLKID_APB0CLK,0)|_RBIT(CLKID_APB1CLK,0)|_RBIT(CLKID_APB2CLK,0)|\ + _RBIT(CLKID_APB3CLK,0)|_RBIT(CLKID_APB4CLK,0)|_RBIT(CLKID_AHB2INTCCLK,0)|\ + _RBIT(CLKID_AHB0CLK,0)|_RBIT(CLKID_ARM926CORECLK,0)|_RBIT(CLKID_ARM926BUSIFCLK,0)|\ + _RBIT(CLKID_ARM926RETIMECLK,0)|_RBIT(CLKID_ISRAM0CLK,0)|_RBIT(CLKID_ISRAM1CLK,0)|\ + _RBIT(CLKID_ISROMCLK,0)|_RBIT(CLKID_INTCCLK,0)|_RBIT(CLKID_AHB2APB0PCLK,0)|\ + _RBIT(CLKID_EVENTROUTERPCLK,0)|_RBIT(CLKID_CLOCKOUT,0)) + +#define BOARD_CLKS_32_63 \ + (_RBIT(CLKID_IOCONFPCLK,32)|_RBIT(CLKID_CGUPCLK,32)|_RBIT(CLKID_SYSCREGPCLK,32)|\ + _RBIT(CLKID_OTPPCLK,32)|_RBIT(CLKID_AHB2APB1PCLK,32)|_RBIT(CLKID_AHB2APB2PCLK,32)|\ + _RBIT(CLKID_AHB2APB3PCLK,32)|_RBIT(CLKID_EDGEDETPCLK,32)) + +#define BOARD_CLKS_64_92 \ + (0) + +/* LED definitions ******************************************************************/ + +#define LED_STARTED 0 +#define LED_HEAPALLOCATE 1 +#define LED_IRQSENABLED 2 +#define LED_STACKCREATED 3 +#define LED_INIRQ 4 +#define LED_SIGNAL 5 +#define LED_ASSERTION 6 +#define LED_PANIC 7 + +/* Button definitions ***************************************************************/ + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +/************************************************************************************ + * Name: lpc31_boardinitialize + * + * Description: + * All LPC31XX architectures must provide the following entry point. This entry + * point is called early in the intitialization -- after all memory has been + * configured and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void lpc31_boardinitialize(void); + +/************************************************************************************ + * Button support. + * + * Description: + * up_buttoninit() must be called to initialize button resources. After that, + * up_buttons() may be called to collect the state of all buttons. up_buttons() + * returns an 8-bit bit set with each bit associated with a button. See the + * BUTTON_* definitions above for the meaning of each bit. + * + ************************************************************************************/ + +#ifdef CONFIG_ARCH_BUTTONS +void up_buttoninit(void); +uint8_t up_buttons(void); +#endif + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_OLIMEX_LPC_H3131_INCLUDE_BOARD_H */ diff --git a/configs/olimex-lpc-h3131/include/board_memorymap.h b/configs/olimex-lpc-h3131/include/board_memorymap.h new file mode 100644 index 0000000000..24ecee7a90 --- /dev/null +++ b/configs/olimex-lpc-h3131/include/board_memorymap.h @@ -0,0 +1,116 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/include/board_memorymap.h + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_OLIMEX_LPC_H3131_INCLUDE_BOARD_MEMORYMAP_H +#define __CONFIGS_OLIMEX_LPC_H3131_INCLUDE_BOARD_MEMORYMAP_H + +/* This file should never be included directly, but only indirectly via + * lpc31_memorymap.h. + */ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* If the LPC31xx ROM page table is selected, then the board-logic is required + * to provide: + * + * PGTABLE_BASE_PADDR - The physical address of the page table in ROM, + * PGTABLE_BASE_VADDR - The mapped address of the page table in ROM, and + * Mappings for each of the PSECTIONS in lpc31_memorymap.h + */ + +#ifdef CONFIG_ARCH_ROMPGTABLE + /* The LPC31xx ROM page table uses a 1-1 physical to virtual memory mapping */ + +# define LPC31_SHADOWSPACE_VSECTION 0x00000000 /* 0x00000000-0x00000fff: Shadow Area 4Kb */ +# define LPC31_INTSRAM_VSECTION 0x11028000 /* Internal SRAM 96Kb-192Kb */ +# define LPC31_INTSRAM0_VADDR 0x11028000 /* 0x11028000-0x1103ffff: Internal SRAM 0 96Kb */ +# define LPC31_INTSRAM1_VADDR 0x11040000 /* 0x11040000-0x11057fff: Internal SRAM 1 96Kb */ +# define LPC31_INTSROM0_VSECTION 0x12000000 /* 0x12000000-0x1201ffff: Internal SROM 0 128Kb */ +# define LPC31_APB01_VSECTION 0x13000000 /* 0x13000000-0x1300bfff: APB0 32Kb APB1 16Kb*/ +# define LPC31_APB0_VADDR 0x13000000 /* 0x13000000-0x13007fff: APB0 32Kb */ +# define LPC31_APB1_VADDR 0x13008000 /* 0x13008000-0x1300bfff: APB1 16Kb */ +# define LPC31_APB2_VSECTION 0x15000000 /* 0x15000000-0x15003fff: APB2 16Kb */ +# define LPC31_APB3_VSECTION 0x16000000 /* 0x16000000-0x160003ff: APB3 1Kb */ +# define LPC31_APB4MPMC_VSECTION 0x17000000 /* 8Kb */ +# define LPC31_APB4_VADDR 0x17000000 /* 0x17000000-0x17000fff: APB4 4Kb */ +# define LPC31_MPMC_VADDR 0x17008000 /* 0x17008000-0x17008fff: MPMC cfg 4Kb */ +# define LPC31_MCI_VSECTION 0x18000000 /* 0x18000000 0x180003ff: MCI/SD/SDIO 1Kb */ +# define LPC31_USBOTG_VSECTION 0x19000000 /* 0x19000000-0x19000fff: USB OTG 4Kb */ +# define LPC31_EXTSRAM_VSECTION 0x20020000 /* 64-128Kb */ +# define LPC31_EXTSRAM0_VADDR 0x20000000 /* 0x20000000-0x2001ffff: External SRAM 0 64-128Kb */ +# define LPC31_EXTSRAM1_VADDR 0x20020000 /* 0x20020000-0x2003ffff: External SRAM 1 64-128Kb */ +# define LPC31_EXTSDRAM0_VSECTION 0x30000000 /* 0x30000000-0x37ffffff: External SDRAM 0 128Mb */ +# define LPC31_INTC_VSECTION 0x60000000 /* 0x60000000-0x60000fff: Interrupt controller 4Kb */ +# define LPC31_NAND_VSECTION 0x70000000 /* 0x70000000-0x700007ff: NANDFLASH Ctrl 2Kb */ + + /* Define the address of the page table within the ROM */ + +# define ROMPGTABLE_OFFSET 0x0001c000 /* Offset of the ROM page table in ROM */ +# define PGTABLE_BASE_PADDR (LPC31_INTSROM0_PSECTION+ROMPGTABLE_OFFSET) +# define PGTABLE_BASE_VADDR (LPC31_INTSROM0_VSECTION+ROMPGTABLE_OFFSET) +#endif + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_OLIMEX_LPC_H3131_INCLUDE_BOARD_MEMORYMAP_H */ diff --git a/configs/olimex-lpc-h3131/nsh/Make.defs b/configs/olimex-lpc-h3131/nsh/Make.defs new file mode 100644 index 0000000000..35ec5382e6 --- /dev/null +++ b/configs/olimex-lpc-h3131/nsh/Make.defs @@ -0,0 +1,112 @@ +############################################################################ +# configs/olimex-lpc-h3131/nsh/Make.defs +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/arm/Toolchain.defs + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ifeq ($(ARCHCCMAJOR),4) + ARCHCPUFLAGS = -mtune=arm9tdmi -march=armv5te -mfloat-abi=soft -fno-builtin +else + ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CONFIG_ARM_TOOLCHAIN),BUILDROOT) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = diff --git a/configs/olimex-lpc-h3131/nsh/defconfig b/configs/olimex-lpc-h3131/nsh/defconfig new file mode 100644 index 0000000000..bf800748d3 --- /dev/null +++ b/configs/olimex-lpc-h3131/nsh/defconfig @@ -0,0 +1,703 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +CONFIG_ARCH_CHIP_LPC31XX=y +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_ARM7TDMI is not set +CONFIG_ARCH_ARM926EJS=y +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM3 is not set +# CONFIG_ARCH_CORTEXM4 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +CONFIG_ARCH_FAMILY="arm" +CONFIG_ARCH_CHIP="lpc31xx" +# CONFIG_ARCH_HAVE_FPU is not set +# CONFIG_ARCH_HAVE_MPU is not set +CONFIG_ARCH_HAVE_LOWVECTORS=y +CONFIG_ARCH_LOWVECTORS=y +CONFIG_PGTABLE_VADDR=0x0 +CONFIG_ARCH_ROMPGTABLE=y + +# +# ARM Configuration Options +# +# CONFIG_ARM_TOOLCHAIN_BUILDROOT is not set +CONFIG_ARM_TOOLCHAIN_CODESOURCERYW=y +# CONFIG_ARM_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARM_TOOLCHAIN_GNU_EABIL is not set +# CONFIG_ARM_TOOLCHAIN_GNU_EABIW is not set +# CONFIG_ARM_TOOLCHAIN_GNU_OABI is not set +CONFIG_ARCH_HAVE_EXTNAND=y +CONFIG_ARCH_HAVE_EXTDRAM=y +CONFIG_ARCH_HAVE_EXTSRAM0=y + +# +# LPC31xx Configuration Options +# +# CONFIG_ARCH_CHIP_LPC3130 is not set +CONFIG_ARCH_CHIP_LPC3131=y +# CONFIG_ARCH_CHIP_LPC3152 is not set +# CONFIG_ARCH_CHIP_LPC3154 is not set + +# +# LPC31xx Peripheral Support +# +CONFIG_LPC31_UART=y +# CONFIG_LPC31_SPI is not set +# CONFIG_LPC31_USBOTG is not set +# CONFIG_LPC31_MCI is not set + +# +# External Memory Configuration +# +CONFIG_ARCH_HAVE_EXTSRAM1=y +# CONFIG_LPC31_EXTNAND is not set +# CONFIG_LPC31_EXTDRAM is not set +# CONFIG_LPC31_EXTSRAM0 is not set +# CONFIG_LPC31_EXTSRAM1 is not set + +# +# LPC31xx UART Configuration +# +# CONFIG_LPC31_UART_PRECALCULATED is not set + +# +# SPI device driver options +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +# CONFIG_ARCH_IRQPRIO is not set +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_HAVE_MMU=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +# CONFIG_ARCH_HAVE_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=16945 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +# CONFIG_BOOT_RUNFROMFLASH is not set +CONFIG_BOOT_RUNFROMISRAM=y +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x11028000 +CONFIG_RAM_VSTART=0x11028000 +CONFIG_RAM_SIZE=196608 + +# +# Board Selection +# +# CONFIG_ARCH_BOARD_EA3131 is not set +CONFIG_ARCH_BOARD_OLIMEX_LPC_H3131=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="olimex-lpc-h3131" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2010 +CONFIG_START_MONTH=3 +CONFIG_START_DAY=15 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_I2S is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART=y + +# +# USART Configuration +# +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART Configuration +# +CONFIG_UART_RXBUFSIZE=256 +CONFIG_UART_TXBUFSIZE=256 +CONFIG_UART_BAUD=115200 +CONFIG_UART_BITS=8 +CONFIG_UART_PARITY=0 +CONFIG_UART_2STOP=0 +# CONFIG_UART_IFLOWCONTROL is not set +# CONFIG_UART_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +CONFIG_FS_READABLE=y +CONFIG_FS_WRITABLE=y +# CONFIG_FS_RAMMAP is not set +CONFIG_FS_FAT=y +# CONFIG_FAT_LCNAMES is not set +# CONFIG_FAT_LFN is not set +# CONFIG_FS_FATTIME is not set +# CONFIG_FAT_DMAMEMORY is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_PROCFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +# CONFIG_NSH_CMDOPT_HEXDUMP is not set +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y + +# +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +CONFIG_NSH_ARCHINIT=y + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System NSH Add-Ons +# + +# +# USB CDC/ACM Device Commands +# + +# +# USB Composite Device Commands +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# NxPlayer media player library / command Line +# +# CONFIG_SYSTEM_NXPLAYER is not set + +# +# RAM test +# +# CONFIG_SYSTEM_RAMTEST is not set + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# + +# +# Stack Monitor +# + +# +# USB Mass Storage Device Commands +# + +# +# Zmodem Commands +# +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/olimex-lpc-h3131/nsh/setenv.sh b/configs/olimex-lpc-h3131/nsh/setenv.sh new file mode 100755 index 0000000000..7ebc4227e4 --- /dev/null +++ b/configs/olimex-lpc-h3131/nsh/setenv.sh @@ -0,0 +1,66 @@ +#!/bin/bash +# configs/olimex-lpc-h3131/nsh/setenv.sh +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# This is the path to the tools subdirectory + +export LPCTOOL_DIR="${WD}/configs/olimex-lpc-h3131/tools" + +# Add the path to the toolchain to the PATH varialble + +export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}" +echo "PATH : ${PATH}" diff --git a/configs/olimex-lpc-h3131/scripts/ld.script b/configs/olimex-lpc-h3131/scripts/ld.script new file mode 100644 index 0000000000..3efc2fdcde --- /dev/null +++ b/configs/olimex-lpc-h3131/scripts/ld.script @@ -0,0 +1,114 @@ +/**************************************************************************** + * configs/olimex-lpc-h3131/scripts/ld.script + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The LPC3131 has 192Kb of ISRAM beginning at virtual address 0x1102:8000. + * LPC31xx boot ROM expects the boot image be compiled with entry point at + * 0x1102:9000. A 128b header will appear at this address (applied by + * lpc313xImgCreator) and the executable code must begin at 0x1102:9080. + */ + +MEMORY +{ + isram (rwx) : ORIGIN = 0x11029080, LENGTH = 192K - 4224 +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > isram + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > isram + + .ARM.extab : { + *(.ARM.extab*) + } > isram + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > isram + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > isram + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > isram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/olimex-lpc-h3131/src/.gitignore b/configs/olimex-lpc-h3131/src/.gitignore new file mode 100644 index 0000000000..726d936e1e --- /dev/null +++ b/configs/olimex-lpc-h3131/src/.gitignore @@ -0,0 +1,2 @@ +/.depend +/Make.dep diff --git a/configs/olimex-lpc-h3131/src/Makefile b/configs/olimex-lpc-h3131/src/Makefile new file mode 100644 index 0000000000..477febcb3b --- /dev/null +++ b/configs/olimex-lpc-h3131/src/Makefile @@ -0,0 +1,100 @@ +############################################################################ +# configs/olimex-lpc-h3131/src/Makefile +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) + +CSRCS = lpc31_boot.c lpc31_clkinit.c + +ifeq ($(CONFIG_ARCH_LEDS),y) +CSRCS += lpc31_leds.c +endif + +ifeq ($(CONFIG_LPC31_SPI),y) +CSRCS += lpc31_spi.c +endif + +ifeq ($(CONFIG_NSH_ARCHINIT),y) +CSRCS += lpc31_nsh.c +endif + +ifeq ($(CONFIG_LPC31_USBOTG),y) +ifeq ($(CONFIG_USBHOST),y) +CSRCS += lpc31_usbhost.c +endif +endif + +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" -I "${shell cygpath -w $(ARCH_SRCDIR)/arm}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/arm +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + $(call ARCHIVE, $@, $(OBJS)) + +.depend: Makefile $(SRCS) + $(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + $(Q) touch $@ + +depend: .depend + +clean: + $(call DELFILE, libboard$(LIBEXT)) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep diff --git a/configs/olimex-lpc-h3131/src/lpc31_boot.c b/configs/olimex-lpc-h3131/src/lpc31_boot.c new file mode 100644 index 0000000000..c8cda3f3b3 --- /dev/null +++ b/configs/olimex-lpc-h3131/src/lpc31_boot.c @@ -0,0 +1,122 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/src/lpc31_boot.c + * + * Copyright (C) 2031 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include + +#include "up_arch.h" +#include "up_internal.h" +#include "lpc31_internal.h" +#include "lpc_h3131.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc31_boardinitialize + * + * Description: + * All LPC31XX architectures must provide the following entry point. This entry + * point is called early in the intitialization -- after all memory has been + * configured and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void lpc31_boardinitialize(void) +{ + /* Initialize configured, external memory resources */ + +#ifdef CONFIG_LPC31_EXTDRAM + lpc31_meminitialize(); +#endif + + /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function + * lpc31_spiinitialize() has been brought into the link. + */ + +#if defined(CONFIG_LPC31_SPI) + if (lpc31_spiinitialize) + { + lpc31_spiinitialize(); + } +#endif + + /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not + * disabled, and 3) the weak function lpc31_usbdev_initialize() has been brought + * into the build. + */ + +#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31_USBOTG) + if (lpc31_usbdev_initialize) + { + lpc31_usbdev_initialize(); + } +#endif + + /* Initialize USB if the 1) the HS host or device controller is in the + * configuration and 2) the weak function sam_usbinitialize() has been brought + * into the build. Presumeably either CONFIG_USBDEV or CONFIG_USBHOST is also + * selected. + */ + +#if defined(CONFIG_SAMA5_UHPHS) || defined(CONFIG_SAMA5_UDPHS) + if (lpc31_usbhost_bootinitialize) + { + lpc31_usbhost_bootinitialize(); + } +#endif + + /* Configure on-board LEDs if LED support has been selected. */ + +#ifdef CONFIG_ARCH_LEDS + up_ledinit(); +#endif +} diff --git a/configs/olimex-lpc-h3131/src/lpc31_clkinit.c b/configs/olimex-lpc-h3131/src/lpc31_clkinit.c new file mode 100644 index 0000000000..1e009e0c77 --- /dev/null +++ b/configs/olimex-lpc-h3131/src/lpc31_clkinit.c @@ -0,0 +1,437 @@ +/**************************************************************************** + * configs/olimex-lpc-h3131/src/lpc31_clkinit.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * References: + * - NXP UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009 + * - NXP lpc313x.cdl.drivers.zip example driver code + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include "lpc31_cgu.h" +#include "lpc31_cgudrvr.h" + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Sub-domain Clock Bitsets *************************************************/ +/* The following bitsets group clocks into bitsets associated with each + * domain and fractional divider subdomain. + * + * Domain 0 (DOMAINID_SYS), Clocks 0 - 29, Fraction dividers 0-6. Clocks not + * defined in the clock sets will be sourced with SYS_BASE_CLK. + */ + +/* Domain 0, Fractional divider 0: */ + +#define CGU_CLKSET_DOMAIN0_DIV0 \ + (_D0B(CLKID_APB0CLK)|_D0B(CLKID_APB1CLK)|_D0B(CLKID_APB2CLK)|\ + _D0B(CLKID_APB3CLK)|_D0B(CLKID_APB4CLK)|_D0B(CLKID_AHB2INTCCLK)|\ + _D0B(CLKID_AHB0CLK)|_D0B(CLKID_DMAPCLK)|_D0B(CLKID_DMACLKGATED)|\ + _D0B(CLKID_NANDFLASHS0CLK)|_D0B(CLKID_NANDFLASHPCLK)|\ + _D0B(CLKID_ARM926BUSIFCLK)|_D0B(CLKID_SDMMCHCLK)|_D0B(CLKID_USBOTGAHBCLK)|\ + _D0B(CLKID_ISRAM0CLK)|_D0B(CLKID_ISRAM1CLK)|_D0B(CLKID_ISROMCLK)|\ + _D0B(CLKID_MPMCCFGCLK)|_D0B(CLKID_MPMCCFGCLK2)|_D0B(CLKID_INTCCLK)) + +/* Domain 0, Fractional divider 1: */ + +#define CGU_CLKSET_DOMAIN0_DIV1 \ + (_D0B(CLKID_ARM926CORECLK)) + +/* Domain 0, Fractional divider 2: */ + +#define CGU_CLKSET_DOMAIN0_DIV2 \ + (_D0B(CLKID_NANDFLASHAESCLK)|_D0B(CLKID_NANDFLASHNANDCLK)) + +/* Domain 0, Fractional divider 3: */ + +#define CGU_CLKSET_DOMAIN0_DIV3 \ + (_D0B(CLKID_NANDFLASHECCCLK)) + +/* Domain 0, Fractional divider 4: */ + +#define CGU_CLKSET_DOMAIN0_DIV4 \ + (_D0B(CLKID_SDMMCCCLKIN)) + +/* Domain 0, Fractional divider 5: */ + +#define CGU_CLKSET_DOMAIN0_DIV5 \ + (_D0B(CLKID_CLOCKOUT)) + +/* Domain 0, Fractional divider 6: */ + +#define CGU_CLKSET_DOMAIN0_DIV6 \ + (_D0B(CLKID_EBICLK)) + +/* Domain 1 (DOMAINID_AHB0APB0), Clocks 30-39, Fraction dividers 7-8. Clocks + * not defined in the clock sets will be sourced with AHB_APB0_BASE_CLK. + */ + +/* Domain 1, Fractional divider 7: */ + +#define CGU_CLKSET_DOMAIN1_DIV7 \ + (_D1B(CLKID_ADCCLK)) + +/* Domain 1, Fractional divider 8: */ + +#define CGU_CLKSET_DOMAIN1_DIV8 \ + (_D1B(CLKID_AHB2APB0PCLK)|_D1B(CLKID_EVENTROUTERPCLK)|\ + _D1B(CLKID_ADCPCLK)|_D1B(CLKID_WDOGPCLK)|_D1B(CLKID_IOCONFPCLK)|\ + _D1B(CLKID_CGUPCLK)|_D1B(CLKID_SYSCREGPCLK)|_D1B(CLKID_OTPPCLK)|\ + _D1B(CLKID_RNGPCLK)) + +/* Domain 2 (DOMAINID_AHB0APB1), Clocks 40-49, Fraction dividers 9-10. Clocks + * not defined in the clock sets will be sourced with AHB_APB1_BASE_CLK. + */ + +/* Domain 2, Fractional divider 9: */ + +#define CGU_CLKSET_DOMAIN2_DIV9 \ + (_D2B(CLKID_AHB2APB1PCLK)|_D2B(CLKID_TIMER0PCLK)|_D2B(CLKID_TIMER1PCLK)|\ + _D2B(CLKID_TIMER2PCLK)|_D2B(CLKID_TIMER3PCLK)|_D2B(CLKID_PWMPCLK)|\ + _D2B(CLKID_PWMPCLKREGS)|_D2B(CLKID_I2C0PCLK)|_D2B(CLKID_I2C1PCLK)) + +/* Domain 2, Fractional divider 10: */ + +#define CGU_CLKSET_DOMAIN2_DIV10 \ + (_D2B(CLKID_PWMCLK)) + +/* Domain 3 (DOMAINID_AHB0APB2), Clocks 50-57, Fraction dividers 11-13. Clocks + * not defined in the clock sets will be sourced with AHB_APB2_BASE_CLK. + */ + +/* Domain 3, Fractional divider 11: */ + +#define CGU_CLKSET_DOMAIN3_DIV11 \ + ( _D3B(CLKID_AHB2APB2PCLK)|_D3B(CLKID_PCMPCLK)|_D3B(CLKID_PCMAPBPCLK)|\ + _D3B(CLKID_UARTAPBCLK)|_D3B(CLKID_LCDPCLK)|_D3B(CLKID_SPIPCLK)|\ + _D3B(CLKID_SPIPCLKGATED)) + +/* Domain 3, Fractional divider 12: */ + +#define CGU_CLKSET_DOMAIN3_DIV12 \ + (_D3B(CLKID_LCDCLK)) + +/* Domain 3, Fractional divider 13: */ + +#define CGU_CLKSET_DOMAIN3_DIV13 \ + (0) + +/* Domain 4 (DOMAINID_AHB0APB3), Clocks 58-70, Fraction divider 14. Clocks + * not defined in the clock sets will be sourced with AHB_APB3_BASE_CLK. + */ + +#define CGU_CLKSET_DOMAIN4_DIV14 \ + (_D4B(CLKID_AHB2APB3PCLK)|_D4B(CLKID_I2SCFGPCLK)|_D4B(CLKID_EDGEDETPCLK)|\ + _D4B(CLKID_I2STXFIFO0PCLK)|_D4B(CLKID_I2STXIF0PCLK)|_D4B(CLKID_I2STXFIFO1PCLK)|\ + _D4B(CLKID_I2STXIF1PCLK)|_D4B(CLKID_I2SRXFIFO0PCLK)|_D4B(CLKID_I2SRXIF0PCLK)|\ + _D4B(CLKID_I2SRXFIFO1PCLK)|_D4B(CLKID_I2SRXIF1PCLK)) + +/* Domain 5 (DOMAINID_PCM), Clock 71, Fraction divider 15. Clocks not + * defined in the clock sets will be sourced with AHB_APB3_BASE_CLK. + */ + +#define CGU_CLKSET_DOMAIN5_DIV15 \ + (_D5B(CLKID_PCMCLKIP)) + +/* Domain 6 (DOMAINID_UART), Clock 72, Fraction divider 16. Clocks mpt + * defined in the clock sets will be sourced with UART_BASE_CLK. + */ + +#define CGU_CLKSET_DOMAIN6_DIV16 \ + (0) + +/* Domain 7 (DOMAINID_CLK1024FS), Clocks 73-86, Fraction dividers 17-22. Clocks + * not defined in the clock sets will be sourced with CLK1024FS_BASE_CLK. + */ + +/* Domain 7, Fractional divider 17: */ + +#define CGU_CLKSET_DOMAIN7_DIV17 \ + ( _D7B(CLKID_I2SEDGEDETECTCLK)|_D7B(CLKID_I2STXWS0)|_D7B(CLKID_I2STXWS1)|\ + _D7B(CLKID_I2SRXWS0)|_D7B(CLKID_I2SRXWS1)) + +/* Domain 7, Fractional divider 18: */ + +#define CGU_CLKSET_DOMAIN7_DIV18 \ + ( _D7B(CLKID_I2STXBCK0N)|_D7B(CLKID_I2STXBCK1N)) + +/* Domain 7, Fractional divider 19: */ + +#define CGU_CLKSET_DOMAIN7_DIV19 \ + ( _D7B(CLKID_I2STXCLK0)|_D7B(CLKID_CLK256FS)) + +/* Domain 7, Fractional divider 20: */ + +#define CGU_CLKSET_DOMAIN7_DIV20 \ + ( _D7B(CLKID_I2SRXBCK0N)|_D7B(CLKID_I2SRXBCK1N)) + +/* Domain 7, Fractional divider 21: */ + +#define CGU_CLKSET_DOMAIN7_DIV21 \ + (0) + +/* Domain 7, Fractional divider 22: */ + +#define CGU_CLKSET_DOMAIN7_DIV22 \ + (0) + +/* Domain 8 (DOMAINID_BCK0, clock 87, and domain 9 (DOMAINID_BCK1), clock 88, + * are directly connected + */ + +/* Domain 10 (DOMAINID_SPI), Clocks 89-90, Fraction divider 23. Clocks + * not defined in the clock sets will be sourced with SPI_CLK_BASE_CLK. + */ + +#define CGU_CLKSET_DOMAIN10_DIV23 \ + ( _D10B(CLKID_SPICLK)|_D10B(CLKID_SPICLKGATED)) + +/* Domain 11 (DOMAINID_SYSCLKO, clock 91, is directly connected */ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +/* Default clock configuration for the LPC-H3131 board. Every board must + * provide an implementation of g_boardclks. This rather complex structure + * is used by the boot-up logic to configure initial lpc313x clocking. + * + * FFAST: 12MHz + * MASTER PLL Freq: 180MHz; + * AUDIOPLL Freq: 1024Fs, Fs = 44.1kHz + * + * Domain Input Subdomain Divider Ratio + * ------------------------ ----------------- ----------------- ------------- + * 0 - DOMAIN_SYS MASTER PLL(HPLL1) DOMAIN0_DIV0 1/2 + * DOMAIN0_DIV1 1 + * DOMAIN0_DIV2 1/2 + * DOMAIN0_DIV3 1/4 + * DOMAIN0_DIV4 1/4 + * DOMAIN0_DIV5 1/2 + * DOMAIN0_DIV6 1/2 + * + * 1 - DOMAIN_AHB0APB0 FFAST DOMAIN1_DIV7 1/38 + * DOMAIN1_DIV8 1/2 + * + * 2 - DOMAIN_AHB0APB1 FFAST DOMAIN2_DIV9 1/2 + * DOMAIN2_DIV10 1/2 + * + * 3 - DOMAIN_AHB0APB2 MASTER PLL(HPLL1) DOMAIN3_DIV11 1/2 + * DOMAIN3_DIV12 1/40 + * DOMAIN3_DIV13 1 (not used) + * + * 4 - DOMAIN_AHB0APB3 FFAST DOMAIN4_DIV14 1/2 + * + * 5 - DOMAIN_PCM MASTER PLL(HPLL1) DOMAIN5_DIV15 1/2 + * + * 6 - DOMAIN_UART FFAST DOMAIN6_DIV16 1 + * + * 7 - DOMAIN_CLCK1024FS AUDIO PLL(HPLL0) DOMAIN7_DIV17 1/256 + * DOMAIN7_DIV18 1/4 + * DOMAIN7_DIV19 1 + * DOMAIN7_DIV20 1/4 + * DOMAIN7_DIV21 1/32 + * DOMAIN7_DIV22 1/2 + * + * 8 - DOMAIN_I2SRXBCK0 I2SRX_BCK0 - - + * + * 9 - DOMAIN_I2SRXBCK1 I2SRX_BCK1 - - + * + * 10 - DOMAIN_SPI MASTER PLL(HPLL1) DOMAIN10_DIV23 1/2 + * + * 11 - DOMAIN_SYSCLKO FFAST - - + */ + +const struct lpc31_clkinit_s g_boardclks = +{ + /* Domain 0 (DOMAINID_SYS), Clocks 0 - 29, Fraction dividers 0-6 */ + + { + CGU_FREQIN_HPPLL1, + { + {{1, 1, 2}, CGU_CLKSET_DOMAIN0_DIV0}, + {{0, 0, 0}, CGU_CLKSET_DOMAIN0_DIV1}, + {{1, 1, 2}, CGU_CLKSET_DOMAIN0_DIV2}, + {{1, 1, 4}, CGU_CLKSET_DOMAIN0_DIV3}, + {{1, 1, 4}, CGU_CLKSET_DOMAIN0_DIV4}, + {{1, 1, 2}, CGU_CLKSET_DOMAIN0_DIV5}, + {{1, 1, 2}, CGU_CLKSET_DOMAIN0_DIV6} + } + }, + + /* Domain 1 (DOMAINID_AHB0APB0), Clocks 30-39, Fraction dividers 7-8 */ + + { + CGU_FREQIN_FFAST, + { + {{1, 1, 38}, CGU_CLKSET_DOMAIN1_DIV7}, + {{1, 1, 2}, CGU_CLKSET_DOMAIN1_DIV8} + } + }, + + /* Domain 2 (DOMAINID_AHB0APB1), Clocks 40-49, Fraction dividers 9-10 */ + + { + CGU_FREQIN_FFAST, + { + {{1, 1, 2}, CGU_CLKSET_DOMAIN2_DIV9}, + {{1, 1, 2}, CGU_CLKSET_DOMAIN2_DIV10} + } + }, + + /* Domain 3 (DOMAINID_AHB0APB2), Clocks 50-57, Fraction dividers 11-13 */ + + { + CGU_FREQIN_HPPLL1, + { + {{1, 1, 2}, CGU_CLKSET_DOMAIN3_DIV11}, + {{1, 1, 40}, CGU_CLKSET_DOMAIN3_DIV12}, + {{0, 0, 0}, CGU_CLKSET_DOMAIN3_DIV13} + } + }, + + /* Domain 4 (DOMAINID_AHB0APB3), Clocks 58-70, Fraction divider 14 */ + + { + CGU_FREQIN_FFAST, + { + {{1, 1, 2}, CGU_CLKSET_DOMAIN4_DIV14} + } + }, + + /* Domain 5 (DOMAINID_PCM), Clock 71, Fraction divider 15 */ + + { + CGU_FREQIN_HPPLL1, + { + {{1, 1, 2}, CGU_CLKSET_DOMAIN5_DIV15} + } + }, + + /* Domain 6 (DOMAINID_UART), Clock 72, Fraction divider 16 */ + + { + CGU_FREQIN_FFAST, + { + {{0, 0, 0}, CGU_CLKSET_DOMAIN6_DIV16} + } + }, + + /* Domain 7 (DOMAINID_CLK1024FS), Clocks 73-86, Fraction dividers 17-22 */ + + { + CGU_FREQIN_HPPLL0, + { + {{1, 1, 256}, CGU_CLKSET_DOMAIN7_DIV17}, + {{1, 1, 4}, CGU_CLKSET_DOMAIN7_DIV18}, + {{0, 0, 0}, CGU_CLKSET_DOMAIN7_DIV19}, + {{1, 1, 4}, CGU_CLKSET_DOMAIN7_DIV20}, + {{1, 1, 32}, CGU_CLKSET_DOMAIN7_DIV21}, + {{1, 1, 2}, CGU_CLKSET_DOMAIN7_DIV22} + } + }, + + /* Domain 8 (DOMAINID_BCK0, clock 87 */ + + { + CGU_FREQIN_I2SRXBCK0 + }, + + /* Domain 9 (DOMAINID_BCK1, clock 88 */ + + { + CGU_FREQIN_I2SRXBCK1 + }, + + /* Domain 10 (DOMAINID_SPI), Clocks 89-90, Fraction divider 23 */ + + { + CGU_FREQIN_HPPLL1, + { + {{1, 1, 2}, CGU_CLKSET_DOMAIN10_DIV23} + } + }, + + /* Domain 11 (DOMAINID_SYSCLKO, clock 91 */ + + { + CGU_FREQIN_FFAST + }, + + /* Dynamic fractional divider configuration (7) */ + +#if 0 /* Dynamic fractional divider initialization not implemented */ + { + { + CGU_DYNSEL_ALLBITS, {1, 1, 64} + }, + { + CGU_DYNSEL_ALLBITS, {0, 0, 0} + }, + { + CGU_DYNSEL_ALLBITS, {1, 1, 3} + }, + { + CGU_DYNSEL_ALLBITS, {1, 1, 6} + }, + { + CGU_DYNSEL_ALLBITS, {1, 1, 6} + }, + { + CGU_DYNSEL_ALLBITS, {1, 1, 6} + }, + { + CGU_DYNSEL_ALLBITS, {1, 1, 3} + } + } +#endif +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ diff --git a/configs/olimex-lpc-h3131/src/lpc31_leds.c b/configs/olimex-lpc-h3131/src/lpc31_leds.c new file mode 100644 index 0000000000..05219f8803 --- /dev/null +++ b/configs/olimex-lpc-h3131/src/lpc31_leds.c @@ -0,0 +1,106 @@ +/**************************************************************************** + * configs/olimex-lpc-h3131/src/lpc31_leds.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include + +#include + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "lpc31_internal.h" + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG + * with CONFIG_DEBUG_VERBOSE too) + */ + +#ifdef CONFIG_DEBUG_LEDS +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_ledinit + ****************************************************************************/ + +#ifdef CONFIG_ARCH_LEDS +void up_ledinit(void) +{ +} + +/**************************************************************************** + * Name: up_ledon + ****************************************************************************/ + +void up_ledon(int led) +{ +} + +/**************************************************************************** + * Name: up_ledoff + ****************************************************************************/ + +void up_ledoff(int led) +{ +} + +#endif /* CONFIG_ARCH_LEDS */ diff --git a/configs/olimex-lpc-h3131/src/lpc31_nsh.c b/configs/olimex-lpc-h3131/src/lpc31_nsh.c new file mode 100644 index 0000000000..2f660c15a2 --- /dev/null +++ b/configs/olimex-lpc-h3131/src/lpc31_nsh.c @@ -0,0 +1,150 @@ +/**************************************************************************** + * configs/olimex-lpc-h3131/src/lpc31_nsh.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include +#include + +#ifdef CONFIG_LPC31_MCI +# include +# include +#endif + +#include "lpc31_internal.h" + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +/* PORT and SLOT number probably depend on the board configuration */ + +#define NSH_HAVEMMCSD 1 + +#if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0 +# error "Only one MMC/SD slot" +# undef CONFIG_NSH_MMCSDSLOTNO +#endif +#ifndef CONFIG_NSH_MMCSDSLOTNO +# define CONFIG_NSH_MMCSDSLOTNO 0 +#endif + +/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support + * is not enabled. + */ + +#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_LPC31_MCI) +# undef NSH_HAVEMMCSD +#endif + +#ifndef CONFIG_NSH_MMCSDMINOR +# define CONFIG_NSH_MMCSDMINOR 0 +#endif + +/* Debug ********************************************************************/ + +#ifdef CONFIG_CPP_HAVE_VARARGS +# ifdef CONFIG_DEBUG +# define message(...) lowsyslog(__VA_ARGS__) +# else +# define message(...) printf(__VA_ARGS__) +# endif +#else +# ifdef CONFIG_DEBUG +# define message lowsyslog +# else +# define message printf +# endif +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: nsh_archinitialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +int nsh_archinitialize(void) +{ +#ifdef NSH_HAVEMMCSD + FAR struct sdio_dev_s *sdio; + int ret; + + /* First, get an instance of the SDIO interface */ + + message("nsh_archinitialize: Initializing SDIO slot %d\n", + CONFIG_NSH_MMCSDSLOTNO); + sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO); + if (!sdio) + { + message("nsh_archinitialize: Failed to initialize SDIO slot %d\n", + CONFIG_NSH_MMCSDSLOTNO); + return -ENODEV; + } + + /* Now bind the SPI interface to the MMC/SD driver */ + + message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n", + CONFIG_NSH_MMCSDMINOR); + ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio); + if (ret != OK) + { + message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret); + return ret; + } + message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n"); + + /* Then let's guess and say that there is a card in the slot. I need to check to + * see if the LPC-H3131 board supports a GPIO to detect if there is a card in + * the slot. + */ + + sdio_mediachange(sdio, true); +#endif + return OK; +} diff --git a/configs/olimex-lpc-h3131/src/lpc31_spi.c b/configs/olimex-lpc-h3131/src/lpc31_spi.c new file mode 100644 index 0000000000..8a53ba1b1a --- /dev/null +++ b/configs/olimex-lpc-h3131/src/lpc31_spi.c @@ -0,0 +1,141 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/src/lpc31_spi.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include + +#include +#include + +#include "up_arch.h" +#include "chip.h" +#include "lpc31_internal.h" +#include "lpc_h3131.h" + +#ifdef CONFIG_LPC31_SPI +#if 0 /* At present, LPC-H3131 specific logic is hard-coded in the file lpc31_spi.c + * in arch/arm/src/lpc31xx */ + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG too) */ + +#undef SPI_DEBUG /* Define to enable debug */ +#undef SPI_VERBOSE /* Define to enable verbose debug */ + +#ifdef SPI_DEBUG +# define spidbg lldbg +# ifdef SPI_VERBOSE +# define spivdbg lldbg +# else +# define spivdbg(x...) +# endif +#else +# undef SPI_VERBOSE +# define spidbg(x...) +# define spivdbg(x...) +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc31_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the LPC-H3131 board. + * + ************************************************************************************/ + +void weak_function lpc31_spiinitialize(void) +{ + /* NOTE: Clocking for SPI has already been provided. Pin configuration is performed + * on-the-fly, so no additional setup is required. + */ +} + +/************************************************************************************ + * Name: lpc31_spiselect and lpc31_spistatus + * + * Description: + * The external functions, lpc31_spiselect and lpc31_spistatus must be + * provided by board-specific logic. They are implementations of the select + * and status methods of the SPI interface defined by struct spi_ops_s (see + * include/nuttx/spi/spi.h). All other methods (including up_spiinitialize()) + * are provided by common LPC31XX logic. To use this common SPI logic on your + * board: + * + * 1. Provide logic in lpc31_boardinitialize() to configure SPI chip select + * pins. + * 2. Provide lpc31_spiselect() and lpc31_spistatus() functions in your + * board-specific logic. These functions will perform chip selection and + * status operations using GPIOs in the way your board is configured. + * 3. Add a calls to up_spiinitialize() in your low level application + * initialization logic + * 4. The handle returned by up_spiinitialize() may then be used to bind the + * SPI driver to higher level logic (e.g., calling + * mmcsd_spislotinitialize(), for example, will bind the SPI driver to + * the SPI MMC/SD driver). + * + ************************************************************************************/ + +void lpc31_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +{ + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); +#warning "Missing logic" +} + +uint8_t lpc31_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +{ + return SPI_STATUS_PRESENT; +} + +#endif /* 0 */ +#endif /* CONFIG_LPC31_SPI */ + diff --git a/configs/olimex-lpc-h3131/src/lpc31_usbhost.c b/configs/olimex-lpc-h3131/src/lpc31_usbhost.c new file mode 100644 index 0000000000..e8155c1f91 --- /dev/null +++ b/configs/olimex-lpc-h3131/src/lpc31_usbhost.c @@ -0,0 +1,311 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/src/lpc31_usbhost.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "up_arch.h" + +#include "lpc31_internal.h" +#include "lpc_h3131.h" + +#if defined(CONFIG_LPC31_USBOTG) || defined(CONFIG_USBHOST) + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#ifndef CONFIG_USBHOST_DEFPRIO +# define CONFIG_USBHOST_DEFPRIO 50 +#endif + +#ifndef CONFIG_USBHOST_STACKSIZE +# define CONFIG_USBHOST_STACKSIZE 1024 +#endif + +#ifdef HAVE_USBDEV +# undef CONFIG_LPC31_USBOTG_RHPORT1 +#endif + +/************************************************************************************ + * Private Data + ************************************************************************************/ +/* Retained device driver handle */ + +static struct usbhost_connection_s *g_ehciconn; + +/* Overcurrent interrupt handler */ + +#if 0 /* Not yet implemented */ +static xcpt_t g_ochandler; +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: ehci_waiter + * + * Description: + * Wait for USB devices to be connected to the EHCI root hub. + * + ************************************************************************************/ + +static int ehci_waiter(int argc, char *argv[]) +{ + bool connected = false; + int rhpndx; + int ret; + + uvdbg("Waiter Running\n"); + for (;;) + { + /* Wait for the device to change state */ + + rhpndx = CONN_WAIT(g_ehciconn, &connected); + DEBUGASSERT(rhpndx >= 0 && rhpndx < 1); + + connected = !connected; + + uvdbg("RHport1 %s\n", + connected ? "connected" : "disconnected"); + + /* Did we just become connected? */ + + if (connected) + { + /* Yes.. enumerate the newly connected device */ + + ret = CONN_ENUMERATE(g_ehciconn, rhpndx); + if (ret < 0) + { + uvdbg("RHport1 CONN_ENUMERATE failed: %d\n", ret); + connected = false; + } + } + } + + /* Keep the compiler from complaining */ + + return 0; +} + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc31_usbhost_bootinitialize + * + * Description: + * Called from lpc31_boardinitialize very early in inialization to setup USB + * host-related GPIO pins for the LPC-H3131 board. + * + * SIGNAL GPIO + * ----------- ------- + * #OTG_PWR_E GPIO19 + * #OTG_OVRCR GPIO20 + * + ************************************************************************************/ + +void weak_function lpc31_usbhost_bootinitialize(void) +{ + /* Configure pin to drive VBUS power */ +#warning Missing logic + + /* Configure pin to detect overrcurrent errors */ +#warning Missing logic +} + +/*********************************************************************************** + * Name: lpc31_usbhost_initialize + * + * Description: + * Called at application startup time to initialize the USB host functionality. + * This function will start a thread that will monitor for device + * connection/disconnection events. + * + ***********************************************************************************/ + +int lpc31_usbhost_initialize(void) +{ + pid_t pid; + int ret; + + /* First, register all of the class drivers needed to support the drivers + * that we care about + * + * Register theUSB host Mass Storage Class: + */ + +#ifdef CONFIG_USBHOST_MSC + ret = usbhost_storageinit(); + if (ret != OK) + { + udbg("ERROR: Failed to register the mass storage class: %d\n", ret); + } +#endif + + /* Register the USB host HID keyboard class driver */ + +#ifdef CONFIG_USBHOST_HIDKBD + ret = usbhost_kbdinit(); + if (ret != OK) + { + udbg("ERROR: Failed to register the KBD class\n"); + } +#endif + + /* Then get an instance of the USB EHCI interface. */ + + g_ehciconn = lpc31_ehci_initialize(0); + if (!g_ehciconn) + { + udbg("ERROR: lpc31_ehci_initialize failed\n"); + return -ENODEV; + } + + /* Start a thread to handle device connection. */ + + pid = TASK_CREATE("EHCI Monitor", CONFIG_USBHOST_DEFPRIO, CONFIG_USBHOST_STACKSIZE, + (main_t)ehci_waiter, (FAR char * const *)NULL); + if (pid < 0) + { + udbg("ERROR: Failed to create ehci_waiter task: %d\n", ret); + return -ENODEV; + } + + return OK; +} + +/*********************************************************************************** + * Name: lpc31_usbhost_vbusdrive + * + * Description: + * Enable/disable driving of VBUS 5V output. This function must be provided by + * each platform that implements the OHCI or EHCI host interface + * + * Input Parameters: + * rhport - Selects root hub port to be powered host interface. See SAM_RHPORT_* + * definitions above. + * enable - true: enable VBUS power; false: disable VBUS power + * + * Returned Value: + * None + * + ***********************************************************************************/ + +void lpc31_usbhost_vbusdrive(int rhport, bool enable) +{ + uvdbg("RHPort%d: enable=%d\n", rhport+1, enable); + + /* The LPC3131 has only a single root hub port */ + + if (rhport == 0) + { + /* Then enable or disable VBUS power */ + + if (enable) + { + /* Enable the Power Switch by driving the enable pin low */ +#warning Missing logic + } + else + { + /* Disable the Power Switch by driving the enable pin high */ +#warning Missing logic + } + } +} + +/************************************************************************************ + * Name: lpc31_setup_overcurrent + * + * Description: + * Setup to receive an interrupt-level callback if an overcurrent condition is + * detected. + * + * Input parameter: + * handler - New overcurrent interrupt handler + * + * Returned value: + * Old overcurrent interrupt handler + * + ************************************************************************************/ + +#if 0 /* Not ready yet */ +xcpt_t lpc31_setup_overcurrent(xcpt_t handler) +{ + xcpt_t oldhandler; + irqstate_t flags; + + /* Disable interrupts until we are done. This guarantees that the + * following operations are atomic. + */ + + flags = irqsave(); + + /* Get the old button interrupt handler and save the new one */ + + oldhandler = g_ochandler; + g_ochandler = handler; + + /* Configure the interrupt */ +#warning Missing logic + + /* Return the old button handler (so that it can be restored) */ + + irqrestore(flags); + return oldhandler; +} +#endif /* 0 */ + +#endif /* CONFIG_LPC31_USBOTG || CONFIG_USBHOST */ diff --git a/configs/olimex-lpc-h3131/src/lpc_h3131.h b/configs/olimex-lpc-h3131/src/lpc_h3131.h new file mode 100644 index 0000000000..71805b6839 --- /dev/null +++ b/configs/olimex-lpc-h3131/src/lpc_h3131.h @@ -0,0 +1,156 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/src/lpc_h3131.h + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_OLIMEX_LPC_H3131_SRC_LPC_H3131_H +#define __CONFIGS_OLIMEX_LPC_H3131_SRC_LPC_H3131_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include +#include +#include + +#include "lpc31_ioconfig.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* LPC-H3131 GPIOs ******************************************************************/ +/* BUTTONS. There are no user accessible buttons on the LPC-H3131 */ + +/* LEDs + * + * SIGNAL COLOR GPIO ILLUMINATION + * ------ ------ ------ ----------------------- + * LED1 Yellow GPIO17 High output illuminates + * LED2 Green GPIO18 High output illuminates + */ + +/* USB HOST + * + * SIGNAL GPIO + * ----------- ------- + * #OTG_PWR_E GPIO19 + * #OTG_OVRCR GPIO20 + */ + +/* SPI Chip Selects */ +/* SPI NOR flash is the only device on SPI. SPI_CS_OUT0 is its chip select */ + +#define SPINOR_CS IOCONFIG_SPI_CSOUT0 + +/* USB Soft Connect Pullup -- NONE */ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc31_meminitialize + * + * Description: + * Initialize external memory resources (sram, sdram, nand, nor, etc.) + * + ************************************************************************************/ + +#ifdef CONFIG_LPC31_EXTDRAM +void lpc31_meminitialize(void); +#endif + +/************************************************************************************ + * Name: lpc31_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the LPC-H3131 board. + * + ************************************************************************************/ + +void weak_function lpc31_spiinitialize(void); + +/************************************************************************************ + * Name: lpc31_usbdev_initialize + * + * Description: + * Called to setup USB-related GPIO pins for the LPC-H3131 board. + * + ************************************************************************************/ + +#if defined(CONFIG_LPC31_USBOTG) && defined(CONFIG_USBDEV) +void weak_function lpc31_usbdev_initialize(void); +#endif + +/************************************************************************************ + * Name: lpc31_usbhost_bootinitialize + * + * Description: + * Called from lpc31_boardinitialize very early in inialization to setup USB + * host-related GPIO pins for the LPC-H3131 board. + * + ************************************************************************************/ + +#if defined(CONFIG_LPC31_USBOTG) && defined(CONFIG_USBHOST) +void weak_function lpc31_usbhost_bootinitialize(void); +#endif + +/*********************************************************************************** + * Name: lpc31_usbhost_initialize + * + * Description: + * Called at application startup time to initialize the USB host functionality. + * This function will start a thread that will monitor for device + * connection/disconnection events. + * + ***********************************************************************************/ + +#if defined(CONFIG_LPC31_USBOTG) && defined(CONFIG_USBHOST) +int lpc31_usbhost_initialize(void); +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_OLIMEX_LPC_H3131_SRC_LPC_H3131_H */ + diff --git a/configs/olimex-lpc-h3131/tools/Makefile b/configs/olimex-lpc-h3131/tools/Makefile new file mode 100644 index 0000000000..5327928acb --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/Makefile @@ -0,0 +1,53 @@ +############################################################################ +# configs/olimex-lpc-h3131/tools/Makefile +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +OBJS = lpchdr.o crc32.o +BIN = lpchdr + +CFLAGS += -Wall -g + +all: $(BIN) +.PHONY: clean + +$(OBJS): %.o: %.c + $(CC) -c $(CFLAGS) $< -o $@ + +lpchdr: $(OBJS) + $(CC) -o $@ $^ + +clean: + @rm -f $(BIN) *.o *~ + + diff --git a/configs/olimex-lpc-h3131/tools/armusbocd.cfg b/configs/olimex-lpc-h3131/tools/armusbocd.cfg new file mode 100644 index 0000000000..012aa783a3 --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/armusbocd.cfg @@ -0,0 +1,106 @@ +################################################################## +# Settings taken from OpenOCD Version 0.7.0 +################################################################## +################################################################## +# daemon configuration +################################################################## +telnet_port 4444 +gdb_port 3333 + +################################################################## +# interface taken from scripts/interface/arm-usb-ocd.cfg +################################################################## +# +# Olimex ARM-USB-OCD +# +# http://www.olimex.com/dev/arm-usb-ocd.html +# + +interface ft2232 +ft2232_device_desc "Olimex OpenOCD JTAG" +ft2232_layout "olimex-jtag" +ft2232_vid_pid 0x15BA 0x0003 + +################################################################## +# Board-specific stuff +################################################################## + +adapter_khz 1000 +reset_config trst_and_srst srst_pulls_trst + +################################################################## +# target taken from scripts/target/lpc3131.cfg +################################################################## + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lpc3131 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# ARM926EJS core +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x07926f0f +} + +# Scan Tap +# Wired to seperate STDO pin on the lpc3131, externally muxed to TDO on ea3131 module +# JTAGSEL pin must be 0 to activate, which reassigns arm tdo to a pass through. +if { [info exists SJCTAPID] } { + set _SJCTAPID $SJCTAPID +} else { + set _SJCTAPID 0x1541E02B +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID + +################################################################## +# various symbol definitions, to avoid hard-wiring addresses +################################################################## + +global lpc313x +set lpc313x [ dict create ] + +# Physical addresses for controllers and memory +dict set lpc313x sram0 0x11028000 +dict set lpc313x sram1 0x11040000 +dict set lpc313x uart 0x15001000 +dict set lpc313x cgu 0x13004000 +dict set lpc313x ioconfig 0x13003000 +dict set lpc313x sysconfig 0x13002800 +dict set lpc313x wdt 0x13002400 + +################################################################## +# Target configuration +################################################################## + +adapter_nsrst_delay 1000 +jtag_ntrst_delay 0 + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME + +$_TARGETNAME invoke-event halted + +$_TARGETNAME configure -work-area-phys [dict get $lpc313x sram0] -work-area-size 0x30000 -work-area-backup 0 + +$_TARGETNAME configure -event reset-init { + echo "\nRunning reset init script for LPC3131\n" + halt + wait_halt + reg cpsr 0xa00000d3 ;#Supervisor mode + reg pc 0x11029000 + poll + sleep 500 +} + +arm7_9 fast_memory_access enable +arm7_9 dcc_downloads enable diff --git a/configs/olimex-lpc-h3131/tools/crc32.c b/configs/olimex-lpc-h3131/tools/crc32.c new file mode 100644 index 0000000000..ccb1416858 --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/crc32.c @@ -0,0 +1,123 @@ +/************************************************************************************************ + * configs/olimex-lpc-h3131/tools/crc32.c + * + * This file is a part of NuttX: + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * + * The logic in this file was developed by Gary S. Brown: + * + * COPYRIGHT (C) 1986 Gary S. Brown. You may use this program, or code or tables + * extracted from it, as desired without restriction. + * + * First, the polynomial itself and its table of feedback terms. The polynomial is: + * + * X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 + * + * Note that we take it "backwards" and put the highest-order term in the lowest-order bit. + * The X^32 term is "implied"; the LSB is the X^31 term, etc. The X^0 term (usually shown + * as "+1") results in the MSB being 1 + * + * Note that the usual hardware shift register implementation, which is what we're using + * (we're merely optimizing it by doing eight-bit chunks at a time) shifts bits into the + * lowest-order term. In our implementation, that means shifting towards the right. Why + * do we do it this way? Because the calculated CRC must be transmitted in order from + * highest-order term to lowest-order term. UARTs transmit characters in order from LSB + * to MSB. By storing the CRC this way we hand it to the UART in the order low-byte to + * high-byte; the UART sends each low-bit to hight-bit; and the result is transmission bit + * by bit from highest- to lowest-order term without requiring any bit shuffling on our + * part. Reception works similarly + * + * The feedback terms table consists of 256, 32-bit entries. Notes + * + * - The table can be generated at runtime if desired; code to do so is shown later. It + * might not be obvious, but the feedback terms simply represent the results of eight + * shift/xor operations for all combinations of data and CRC register values + * + * - The values must be right-shifted by eight bits by the updcrc logic; the shift must + * be u_(bring in zeroes). On some hardware you could probably optimize the shift in + * assembler by using byte-swap instructions polynomial $edb88320 + ************************************************************************************************/ + +/************************************************************************************************ + * Included Files + ************************************************************************************************/ + +#include +#include +#include "lpchdr.h" + +/************************************************************************************************ + * Private Data + ************************************************************************************************/ + +static const uint32_t crc32_tab[] = +{ + 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3, + 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, + 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, + 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5, + 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, + 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, + 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f, + 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, + 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, + 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, + 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, + 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, + 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, + 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, + 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, + 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, + 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, + 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, + 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7, + 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, + 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, + 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79, + 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, + 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, + 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, + 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, + 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, + 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, + 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, + 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, + 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf, + 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d +}; + +/************************************************************************************************ + * Public Functions + ************************************************************************************************/ +/************************************************************************************************ + * Name: crc32part + * + * Description: + * Continue CRC calculation on a part of the buffer. + * + ************************************************************************************************/ + +uint32_t crc32part(const uint8_t *src, size_t len, uint32_t crc32val) +{ + size_t i; + + for (i = 0; i < len; i++) + { + crc32val = crc32_tab[(crc32val ^ src[i]) & 0xff] ^ (crc32val >> 8); + } + return crc32val; +} + +/************************************************************************************************ + * Name: crc32 + * + * Description: + * Return a 32-bit CRC of the contents of the 'src' buffer, length 'len' + * + ************************************************************************************************/ + +uint32_t crc32(const uint8_t *src, size_t len) +{ + return crc32part(src, len, 0); +} diff --git a/configs/olimex-lpc-h3131/tools/lpchdr.c b/configs/olimex-lpc-h3131/tools/lpchdr.c new file mode 100644 index 0000000000..178cce21b0 --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/lpchdr.c @@ -0,0 +1,297 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/tools/lpchdr.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "lpchdr.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#define IO_BUF_SIZE 1024 +#define HDR_SIZE 0x80 +#define HDR_CRC_SIZE 0x6c + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +static const char *g_infile; +static const char *g_outfile; + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +static void show_usage(const char *progname, int exitcode) +{ + fprintf(stderr, "%s -o \n", progname); + exit(exitcode); +} + +static void parse_args(int argc, char **argv) +{ + int ch; + + while ((ch = getopt(argc, argv, ":o:")) >= 0) + { + switch (ch) + { + case 'o': + g_outfile = optarg; + break; + + case ':': + fprintf(stderr, "Missing option argumen\n"); + show_usage(argv[0], 1); + + case '?': + default: + fprintf(stderr, "Unrecognized option\n"); + show_usage(argv[0], 1); + } + } + + if (optind >= argc) + { + fprintf(stderr, "Missing binary input file name\n"); + show_usage(argv[0], 1); + } + + g_infile = argv[optind]; + optind++; + + if (optind < argc) + { + fprintf(stderr, "Garbage at the end of the command line\n"); + show_usage(argv[0], 1); + } +} + +static inline uint32_t infilecrc32(int infd, size_t len, size_t padlen) +{ + off_t offset; + uint8_t buffer[IO_BUF_SIZE]; + ssize_t nbytes; + size_t bytesread; + uint32_t crc; + + offset = lseek(infd, 0, SEEK_SET); + if (offset == (off_t)-1) + { + fprintf(stderr, "lseek failed: %s\n", strerror(errno)); + exit(4); + } + + crc = 0; + for (bytesread = 0; bytesread < len; bytesread += nbytes) + { + nbytes = read(infd, buffer, IO_BUF_SIZE); + if (nbytes < 0) + { + fprintf(stderr, "read failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbytes == 0) + { + fprintf(stderr, "Unexpected end-of-file: %s\n", strerror(errno)); + exit(4); + } + else + { + crc = crc32part(buffer, nbytes, crc); + } + } + + /* Add the zero-padding at the end of the binary in the CRC */ + + memset(buffer, 0, IO_BUF_SIZE); + return crc32part(buffer, padlen, crc); +} + +static inline void writefile(int infd, int outfd, size_t len, size_t padlen) +{ + off_t offset; + uint8_t buffer[IO_BUF_SIZE]; + ssize_t nbytesread; + ssize_t nbyteswritten; + size_t totalread; + + offset = lseek(infd, 0, SEEK_SET); + if (offset == (off_t)-1) + { + fprintf(stderr, "lseek failed: %s\n", strerror(errno)); + exit(4); + } + + for (totalread = 0; totalread < len; totalread += nbytesread) + { + nbytesread = read(infd, buffer, IO_BUF_SIZE); + if (nbytesread < 0) + { + fprintf(stderr, "read failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbytesread == 0) + { + fprintf(stderr, "Unexpected end-of-file: %s\n", strerror(errno)); + exit(4); + } + else + { + nbyteswritten = write(outfd, buffer, nbytesread); + if (nbyteswritten < 0) + { + fprintf(stderr, "write failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbyteswritten != nbytesread) + { + fprintf(stderr, "Short writes not handled\n"); + exit(4); + } + } + } + + /* Write the zero-padding at the end of the binary */ + + memset(buffer, 0, IO_BUF_SIZE); + nbyteswritten = write(outfd, buffer, padlen); + if (nbyteswritten < 0) + { + fprintf(stderr, "write failed: %s\n", strerror(errno)); + exit(4); + } + else if (nbyteswritten != padlen) + { + fprintf(stderr, "Short writes not handled\n"); + exit(4); + } +} + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +int main(int argc, char **argv, char **envp) +{ + struct lpc31_header_s g_hdr; + struct stat buf; + ssize_t nbytes; + size_t padlen; + int infd; + int outfd; + int ret; + + /* Parse arguments */ + + parse_args(argc, argv); + + /* Open files */ + + infd = open(g_infile, O_RDONLY); + if (infd < 0) + { + fprintf(stderr, "Failed to open %s for reading: %s\n", g_infile, strerror(errno)); + exit(2); + } + + outfd = open(g_outfile, O_WRONLY|O_CREAT|O_TRUNC, 0644); + if (outfd < 0) + { + fprintf(stderr, "Failed to open %s for writing: %s\n", g_outfile, strerror(errno)); + exit(2); + } + + /* Get the size of the binary file */ + + ret = fstat(infd, &buf); + if (ret < 0) + { + fprintf(stderr, "stat of %s failed: %s\n", g_infile, strerror(errno)); + exit(3); + } + + /* Initialize the header */ + + memset(&g_hdr, 0, sizeof(struct lpc31_header_s)); + g_hdr.vector = 0xea00001e; /* b 0x11029080 */ + g_hdr.magic = 0x41676d69; +#if 1 /* CRC doesn't seem to be functional */ + g_hdr.imageType = 0x0000000a; +#else + g_hdr.imageType = 0x0000000b; +#endif + g_hdr.imageLength = (buf.st_size + sizeof(struct lpc31_header_s) + 511) & ~0x1ff; + + /* This is how much we must pad at the end of the binary image. */ + + padlen = g_hdr.imageLength - buf.st_size; + + /* Calculate CRCs */ + + g_hdr.execution_crc32 = infilecrc32(infd, buf.st_size, padlen); + g_hdr.header_crc32 = crc32((const uint8_t*)&g_hdr, HDR_CRC_SIZE); + + /* Write the header */ + + nbytes = write(outfd, &g_hdr, HDR_SIZE); + if (nbytes != 0x80) + { + fprintf(stderr, "write of header to of %s failed: %s\n", g_outfile, strerror(errno)); + exit(4); + } + + /* Copy the input file to the output */ + + writefile(infd, outfd, buf.st_size, padlen); + close(infd); + close(outfd); + return 0; +} + + diff --git a/configs/olimex-lpc-h3131/tools/lpchdr.h b/configs/olimex-lpc-h3131/tools/lpchdr.h new file mode 100644 index 0000000000..ea30df072a --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/lpchdr.h @@ -0,0 +1,105 @@ +/************************************************************************************ + * configs/olimex-lpc-h3131/tools/lpchdr.h + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_OLIMEX_LPC_H3131_TOOLS_LPCHDR_H +#define __CONFIGS_OLIMEX_LPC_H3131_TOOLS_LPCHDR_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +struct lpc31_header_s +{ + /* OFFS DESCRIPTION */ + uint32_t vector; /* 0x00 Valid ARM instruction. Usually this will be + * a branch instruction to entry point of the + * image. */ + uint32_t magic; /* 0x04 This field is used by boot ROM to detect a + * valid image header. This field should always + * be set to 0x41676d69. */ + uint32_t execution_crc32; /* 0x08 CRC32 value of execution part of the image. If + * the ‘image_type’ is set to ‘0xA’, this field + * is ignored by boot ROM. */ + uint32_t Reserved0[4]; /* 0x0c-0x18: Should be zero. */ + uint32_t imageType; /* 0x1c Specifies whether CRC check should be done + * on the image or not: + * 0xA – No CRC check required. + * 0xB – Do CRC32 check on both header and + * execution part of the image. */ + uint32_t imageLength; /* 0x20 Total image length including header rounded + * up to the nearest 512 byte boundary. In C + * language the field can be computed as: + * imageLength = (Actual length + 511) & ~0x1FF; */ + uint32_t releaseID; /* 0x24 Release or version number of the image. Note, + * this field is not used by boot ROM but is + * provided to track the image versions. */ + uint32_t buildTime; /* 0x28 Time (expressed in EPOC time format) at which + * image is built. Note, this field is not used + * by boot ROM but is provided to track the image + * versions. */ + uint32_t sbzBootParameter; /* 0x2c hould be zero. */ + uint32_t cust_reserved[15]; /* 0x30-0x68: Reserved for customer use (60 bytes) */ + uint32_t header_crc32; /* 0x6c CRC32 value of the header (bytes 0x00 to 0x6C + * of the image). If the ‘image_type’ is set + * to ‘0xA’, this field is ignored by boot ROM. */ + uint32_t Reserved1[4]; /* 0x70-0x7c: Should be zero. */ + /* 0x80 Start of program code (128Kb max). The final + * image has to be padded to the nearest 512 + * byte boundary */ +}; + +/************************************************************************************ + * Public data + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +extern uint32_t crc32part(const uint8_t *src, size_t len, uint32_t crc32val); +extern uint32_t crc32(const uint8_t *src, size_t len); + +#endif /* __CONFIGS_OLIMEX_LPC_H3131_TOOLS_LPCHDR_H */ + diff --git a/configs/olimex-lpc-h3131/tools/mklpc.sh b/configs/olimex-lpc-h3131/tools/mklpc.sh new file mode 100755 index 0000000000..3f8de2d88e --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/mklpc.sh @@ -0,0 +1,60 @@ +#!/bin/sh + +# This script lies in sub-directory configs/olimex-lpc-h3131/tools but make be executed +# from either that directory or TOPDIR + +MYNAME=`basename $0` +if [ -x "$PWD/$MYNAME" ]; then + TOPDIR="$PWD/../../.." +else + if [ -x "$PWD/configs/olimex-lpc-h3131/tools/$MYNAME" ]; then + TOPDIR="$PWD" + else + echo "This script must be executed from a known director" + exit 1 + fi +fi +echo "TOOLDIR: $TOOLDIR" + +# The lpchdr could be named lpchdr.exe if we are running under Cygwin or +# just lpchdr under Linux + +TOOLDIR=$TOPDIR/configs/olimex-lpc-h3131/tools + +if [ ! -d "$TOOLDIR" ]; then + echo "Tool directory $TOOLDIR does not exist" + exit 1 +fi + +if [ -x "$TOOLDIR/lpchdr.exe" ]; then + LPCHDR="$TOOLDIR/lpchdr.exe" +else + if [ -x "$TOOLDIR/lpchdr" ]; then + LPCHDR="$TOOLDIR/lpchdr" + else + echo "lpchdr executable does not exist in $TOODIR" + echo " - cd $TOOLDIR" + echo " - make" + fi +fi +echo "LPCHDR: $LPCHDR" + +# Now get the path to the NuttX executable + +NUTTXPATH="$TOPDIR/nuttx.bin" + +if [ ! -f "$NUTTXPATH" ]; then + echo "NuttX binary does not exist at $NUTTXPATH" + echo " - cd $TOPDIR" + echo " - make" + exit 1 +fi +echo "NUTTXPATH: $NUTTXPATH" + +# Create the binary + +echo "COMMAND: $LPCHDR -o $TOPDIR/nuttx.lpc $NUTTXPATH" +"$LPCHDR" -o "$TOPDIR/nuttx.lpc" "$NUTTXPATH" || \ + { echo "$LPCHDR failed" ; exit 1 ; } +echo "Successfully created binary" + diff --git a/configs/olimex-lpc-h3131/tools/oocd.sh b/configs/olimex-lpc-h3131/tools/oocd.sh new file mode 100755 index 0000000000..655f52d9cd --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/oocd.sh @@ -0,0 +1,61 @@ +#!/bin/sh +# +# See configs/olimex-lpc-h3131/README.txt for information about +# this file. + +TOPDIR=$1 +USAGE="$0 [-d]" +if [ -z "${TOPDIR}" ]; then + echo "Missing argument" + echo $USAGE + exit 1 +fi + +# Places where OpenOCD has been installed +#OPENOCD_PATH="/cygdrive/c/OpenOCD/openocd-0.4.0/src" +#OPENOCD_PATH="/cygdrive/c/gccfd/openocd/bin" +OPENOCD_PATH="/usr/local/bin" + +#TARGET_PATH="c:\OpenOCD\openocd-0.4.0\tcl" +TARGET_PATH="/usr/local/share/openocd/scripts" + +# OPENOCD_EXE=openocd-ftd2xx.exe +OPENOCD_EXE=openocd.exe + +#OPENOCD_CFG=`cygpath -w "${TOPDIR}/configs/olimex-lpc1766stk/tools/olimex.cfg"` +OPENOCD_CFG="${TOPDIR}/configs/olimex-lpc-h3131/tools/armusbocd.cfg" + +# OPENOCD_ARGS="-f `cygpath -w ${OPENOCD_CFG}` -s `cygpath -w ${TARGET_PATH}`" +# OPENOCD_ARGS="-f interface/arm-usb-ocd.cfg -f target/lpc3131.cfg -c \"adapter_khz 1000\"" +OPENOCD_ARGS="-f ${OPENOCD_CFG} -s ${TARGET_PATH} " + +if [ "X$2" = "X-d" ]; then + OPENOCD_ARGS=$OPENOCD_ARGS" -d3" + set -x +fi + +if [ ! -d ${OPENOCD_PATH} ]; then + echo "OpenOCD path does not exist: ${OPENOCD_PATH}" + exit 1 +fi +if [ ! -x ${OPENOCD_PATH}/${OPENOCD_EXE} ]; then + echo "OpenOCD does not exist: ${OPENOCD_PATH}/${OPENOCD_EXE}" + exit 1 +fi +if [ ! -f ${OPENOCD_CFG} ]; then + echo "OpenOCD config file does not exist: ${OPENOCD_CFG}" + exit 1 +fi + +echo "Starting OpenOCD" +#${OPENOCD_PATH}/${OPENOCD_EXE} ${OPENOCD_ARGS} & +cd ${OPENOCD_PATH} || { echo "Failed to CD to ${OPENOCD_PATH}"; exit 1; } +${OPENOCD_EXE} ${OPENOCD_ARGS} & + +echo "OpenOCD daemon started" +ps -ef | grep openocd +echo "In GDB: target remote localhost:3333" + + + + diff --git a/configs/olimex-lpc-h3131/tools/usb-driver.txt b/configs/olimex-lpc-h3131/tools/usb-driver.txt new file mode 100644 index 0000000000..83d7598a55 --- /dev/null +++ b/configs/olimex-lpc-h3131/tools/usb-driver.txt @@ -0,0 +1,25 @@ +https://www.olimex.com/dev/pdf/ARM/JTAG/Repair%20Procedure%20for%20OpenOcd-Rev.%20G%20drivers.pdf + +Repair procedure for ARM-USB-OCD drivers + +1. Uninstalling ARM-USB-OCD drivers +------------------------------------- +1.1. Connect your programmer/debugger to your computer, open Device Manager + and uninstall the drivers for ARM-USB-OCD. +1.2. After you have uninstalled ARM-USB-TINY driver from Device Manager, + disconnect the programmer from your computer. +1.3. Now you should download FTClean.exe from here: + http://www.ftdichip.com/Support/Utilities/FTClean.zip. +1.4. After download is complete extract the "*.zip" file, open folder FTClean, + and run FTClean.exe +1.5. Ror VID (Hex) select "Other". And after that fill the first box with 15ba + and "PID (Hex)" with 0004. +1.6. Press "Clean System" button. Make sure that all FTDI devices are + disconnected. (My require administrator privileges). + +2. Re-installing the ARM-USB-OCD driver +--------------------------------------- +2.1 Connect the programmer/debugger to the computer. +2.2 When prompted, browse to the C:\gccfd\DRIVERS\ARM-USB-OCD-DRIVER + directory and install. (A different driver is required for OpenOCD + 0.4.0. That driver is available from the olimex.com web site).