sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arch/arm/src/tiva: The LauchXL-CC1312R1 NSH configuration is now fully functional. On to bigger and better things.

Browse Source
This commit is contained in:
Gregory Nutt 2019-02-13 08:06:52 -06:00
parent fa1e151b12
commit 07c16d8b70
4 changed files with 45 additions and 56 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/src/tiva/cc13xx/cc13xx_gpio.c
View File

@ -132,7 +132,7 @@ int tiva_configgpio(pinconfig_t pinconfig)
/* Configure the GPIO as an output */
regval = getreg32(TIVA_GPIO_DOE);
regval |= ~(1 << dio);
regval |= (1 << dio);
putreg32(regval, TIVA_GPIO_DOE);
}

6
arch/arm/src/tiva/hardware/cc13x0/cc13x0_ioc.h
View File

@ -169,9 +169,9 @@
#define IOC_IOCFG_WUCFG_MASK (3 << IOC_IOCFG_WUCFG_SHIFT)
# define IOC_IOCFG_WUCFG_NONE (0 << IOC_IOCFG_WUCFG_SHIFT) /* 0, 1: Wakeup disabled */
# define IOC_IOCFG_WUCFG_ENABLE (2 << IOC_IOCFG_WUCFG_SHIFT) /* 2, 3: Wakeup enabled */
# define IOC_IOCFG_WUCFG_WAKEUPL (2 << IOC_IOCFG_WUCFG_SHIFT) /* Wakeup on transition low */
# define IOC_IOCFG_WUCFG_WEKUPH (3 << IOC_IOCFG_WUCFG_SHIFT) /* Wakeup on transition high */
#define IOC_IOCFG_IE (1 >> 29) /* Bit 29: Input enable */
# define IOC_IOCFG_WUCFG_WAKEUPL (2 << IOC_IOCFG_WUCFG_SHIFT) /* 2: Wakeup on transition low */
# define IOC_IOCFG_WUCFG_WEKUPH (3 << IOC_IOCFG_WUCFG_SHIFT) /* 3: Wakeup on transition high */
#define IOC_IOCFG_IE (1 << 29) /* Bit 29: Input enable */
#define IOC_IOCFG_HYSTEN (1 << 30) /* Bit 30: Input hysteresis enable */
/* PORTID definitions */

6
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_ioc.h
View File

@ -172,9 +172,9 @@
#define IOC_IOCFG_WUCFG_MASK (3 << IOC_IOCFG_WUCFG_SHIFT)
# define IOC_IOCFG_WUCFG_NONE (0 << IOC_IOCFG_WUCFG_SHIFT) /* 0, 1: Wakeup disabled */
# define IOC_IOCFG_WUCFG_ENABLE (2 << IOC_IOCFG_WUCFG_SHIFT) /* 2, 3: Wakeup enabled */
# define IOC_IOCFG_WUCFG_WAKEUPL (2 << IOC_IOCFG_WUCFG_SHIFT) /* Wakeup on transition low */
# define IOC_IOCFG_WUCFG_WEKUPH (3 << IOC_IOCFG_WUCFG_SHIFT) /* Wakeup on transition high */
#define IOC_IOCFG_IE (1 >> 29) /* Bit 29: Input enable */
# define IOC_IOCFG_WUCFG_WAKEUPL (2 << IOC_IOCFG_WUCFG_SHIFT) /* 2: Wakeup on transition low */
# define IOC_IOCFG_WUCFG_WEKUPH (3 << IOC_IOCFG_WUCFG_SHIFT) /* 3: Wakeup on transition high */
#define IOC_IOCFG_IE (1 << 29) /* Bit 29: Input enable */
#define IOC_IOCFG_HYSTEN (1 << 30) /* Bit 30: Input hysteresis enable */
/* PORTID definitions */

17
configs/launchxl-cc1312r1/README.txt
View File

@ -21,20 +21,9 @@ Status
development. Serious board development will occur later. Board
support is missing LED and button support.
2019-02-10: Figured out how to connect J-Link and began debug.
2019-02-12: A little progress. I do make it all the way into NSH:
ABCF
nx_start: Entry
uart_register: Registering /dev/console
uart_register: Registering /dev/ttyS0
work_hpstart: Starting high-priority kernel worker thread(s)
up_release_pending: From TCB=20000c00
nx_start_application: Starting init thread
NuttShell (NSH) NuttX-7.28
nsh> nx_start: CPU0: Beginning Idle Loop
But things are not very stable and I do not get any console input.
2019-02-12: A little progress. I do make it all the way into NSH, but
with no console input.
2019-02-13: NSH is now fully functional.
Serial Console
==============