diff --git a/arch/arm/src/kinetis/Kconfig b/arch/arm/src/kinetis/Kconfig
index 17923818b5..cf781ade5e 100644
--- a/arch/arm/src/kinetis/Kconfig
+++ b/arch/arm/src/kinetis/Kconfig
@@ -629,6 +629,25 @@ config KINETIS_ENET_NORXER
 		If selected, then the MII/RMII RXER output will be configured as a
 		GPIO and pulled low.
 
+choice
+	prompt "Work queue"
+	default KINETIS_EMAC_LPWORK if SCHED_LPWORK
+	default KINETIS_EMAC_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config KINETIS_EMAC_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config KINETIS_EMAC_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
 endmenu # Kinetis Ethernet Configuration
 
 menu "Kinetis SDHC Configuration"
diff --git a/arch/arm/src/kinetis/kinetis_enet.c b/arch/arm/src/kinetis/kinetis_enet.c
index dc0be25e16..a546103d36 100644
--- a/arch/arm/src/kinetis/kinetis_enet.c
+++ b/arch/arm/src/kinetis/kinetis_enet.c
@@ -80,12 +80,24 @@
  * Pre-processor Definitions
  ****************************************************************************/
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_KINETIS_EMAC_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_KINETIS_EMAC_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_KINETIS_EMAC_HPWORK nor CONFIG_KINETIS_EMAC_LPWORK defined
+#  endif
 #endif
 
 /* CONFIG_KINETIS_ENETNETHIFS determines the number of physical interfaces
@@ -974,11 +986,11 @@ static int kinetis_interrupt(int irq, FAR void *context)
 
   /* Cancel any pending poll work */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the interrupt processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, kinetis_interrupt_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, kinetis_interrupt_work, priv, 0);
 
 #else
   /* Process the interrupt now */
@@ -1093,11 +1105,11 @@ static void kinetis_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, kinetis_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, kinetis_txtimeout_work, priv, 0);
 #else
   /* Process the timeout now */
 
@@ -1206,7 +1218,7 @@ static void kinetis_polltimer_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, kinetis_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, kinetis_poll_work, priv, 0);
     }
   else
     {
@@ -1513,7 +1525,7 @@ static int kinetis_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, kinetis_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, kinetis_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/lpc17xx/Kconfig b/arch/arm/src/lpc17xx/Kconfig
index 5038000d86..7691b48a0e 100644
--- a/arch/arm/src/lpc17xx/Kconfig
+++ b/arch/arm/src/lpc17xx/Kconfig
@@ -724,6 +724,26 @@ config LPC17_MULTICAST
 	---help---
 		Enable receipt of multicast (and unicast) frames. Automatically set
 		if NET_IGMP is selected.
+
+choice
+	prompt "Work queue"
+	default LPC17_ETHERNET_LPWORK if SCHED_LPWORK
+	default LPC17_ETHERNET_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config LPC17_ETHERNET_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config LPC17_ETHERNET_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
 endmenu
 
 menu "LCD device driver options"
diff --git a/arch/arm/src/lpc17xx/lpc17_ethernet.c b/arch/arm/src/lpc17xx/lpc17_ethernet.c
index 1373050682..d5ff009fd6 100644
--- a/arch/arm/src/lpc17xx/lpc17_ethernet.c
+++ b/arch/arm/src/lpc17xx/lpc17_ethernet.c
@@ -83,12 +83,24 @@
  * Pre-processor Definitions
  ****************************************************************************/
 /* Configuration ************************************************************/
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_LPC17_ETHERNET_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_LPC17_ETHERNET_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_LPC17_ETHERNET_HPWORK nor CONFIG_LPC17_ETHERNET_LPWORK defined
+#  endif
 #endif
 
 /* CONFIG_LPC17_NINTERFACES determines the number of physical interfaces
@@ -1259,11 +1271,11 @@ static int lpc17_interrupt(int irq, void *context)
 
               /* Cancel any pending RX done work */
 
-              work_cancel(HPWORK, &priv->lp_rxwork);
+              work_cancel(ETHWORK, &priv->lp_rxwork);
 
               /* Schedule RX-related work to be performed on the work thread */
 
-              work_queue(HPWORK, &priv->lp_rxwork, (worker_t)lpc17_rxdone_work,
+              work_queue(ETHWORK, &priv->lp_rxwork, (worker_t)lpc17_rxdone_work,
                          priv, 0);
 
 #else /* CONFIG_NET_NOINTS */
@@ -1323,7 +1335,7 @@ static int lpc17_interrupt(int irq, void *context)
                * to avoid race conditions with the TX timeout work)
                */
 
-              work_cancel(HPWORK, &priv->lp_txwork);
+              work_cancel(ETHWORK, &priv->lp_txwork);
 
               /* Then make sure that the TX poll timer is running (if it is
                * already running, the following would restart it).  This is
@@ -1336,7 +1348,7 @@ static int lpc17_interrupt(int irq, void *context)
 
               /* Schedule TX-related work to be performed on the work thread */
 
-              work_queue(HPWORK, &priv->lp_txwork, (worker_t)lpc17_txdone_work,
+              work_queue(ETHWORK, &priv->lp_txwork, (worker_t)lpc17_txdone_work,
                          priv, 0);
 
 #else /* CONFIG_NET_NOINTS */
@@ -1468,7 +1480,7 @@ static void lpc17_txtimeout_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->lp_txwork, lpc17_txtimeout_work, priv, 0);
+      work_queue(ETHWORK, &priv->lp_txwork, lpc17_txtimeout_work, priv, 0);
     }
 
 #else
@@ -1526,7 +1538,7 @@ static void lpc17_poll_process(FAR struct lpc17_driver_s *priv)
   if (considx != prodidx)
     {
 #ifdef CONFIG_NET_NOINTS
-      work_queue(HPWORK, &priv->lp_rxwork, (worker_t)lpc17_rxdone_work,
+      work_queue(ETHWORK, &priv->lp_rxwork, (worker_t)lpc17_rxdone_work,
                  priv, 0);
 
 #else /* CONFIG_NET_NOINTS */
@@ -1606,7 +1618,7 @@ static void lpc17_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->lp_pollwork, lpc17_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->lp_pollwork, lpc17_poll_work, priv, 0);
     }
   else
     {
@@ -2013,7 +2025,7 @@ static int lpc17_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->lp_pollwork, lpc17_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->lp_pollwork, lpc17_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/lpc43xx/Kconfig b/arch/arm/src/lpc43xx/Kconfig
index 7c9a89c49d..c063fd86c7 100644
--- a/arch/arm/src/lpc43xx/Kconfig
+++ b/arch/arm/src/lpc43xx/Kconfig
@@ -485,8 +485,8 @@ endif # LCP43_EXTSDRAM3
 
 endmenu # External Memory Configuration
 
-if LPC43_ETHERNET
 menu "Ethernet MAC configuration"
+	depends on LPC43_ETHERNET
 
 config LPC43_PHYADDR
 	int "PHY address"
@@ -619,6 +619,26 @@ config LPC43_RMII
 	bool
 	default y if !LPC43_MII
 
+choice
+	prompt "Work queue"
+	default LPC43_ETHERNET_LPWORK if SCHED_LPWORK
+	default LPC43_ETHERNET_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config LPC43_ETHERNET_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config LPC43_ETHERNET_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
+
 config LPC43_ETHERNET_REGDEBUG
 	bool "Register-Level Debug"
 	default n
@@ -627,7 +647,6 @@ config LPC43_ETHERNET_REGDEBUG
 		Enable very low-level register access debug.  Depends on CONFIG_DEBUG_NET_INFO.
 
 endmenu # Ethernet MAC configuration
-endif # LPC43_ETHERNET
 
 menu "RS-485 Configuration"
 if LPC43_USART0
diff --git a/arch/arm/src/lpc43xx/lpc43_ethernet.c b/arch/arm/src/lpc43xx/lpc43_ethernet.c
index 086dd0b8f3..c96f1a7551 100644
--- a/arch/arm/src/lpc43xx/lpc43_ethernet.c
+++ b/arch/arm/src/lpc43xx/lpc43_ethernet.c
@@ -83,12 +83,24 @@
  ****************************************************************************/
 /* Configuration ************************************************************/
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_LPC43_ETHERNET_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_LPC43_ETHERNET_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_LPC43_ETHERNET_HPWORK nor CONFIG_LPC43_ETHERNET_LPWORK defined
+#  endif
 #endif
 
 #ifndef CONFIG_LPC43_PHYADDR
@@ -2075,11 +2087,11 @@ static int lpc43_interrupt(int irq, FAR void *context)
 
       /* Cancel any pending poll work */
 
-      work_cancel(HPWORK, &priv->work);
+      work_cancel(ETHWORK, &priv->work);
 
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, lpc43_interrupt_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, lpc43_interrupt_work, priv, 0);
     }
 
 #else
@@ -2195,11 +2207,11 @@ static void lpc43_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, lpc43_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, lpc43_txtimeout_work, priv, 0);
 
 #else
   /* Process the timeout now */
@@ -2339,7 +2351,7 @@ static void lpc43_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, lpc43_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, lpc43_poll_work, priv, 0);
     }
   else
     {
@@ -2556,7 +2568,7 @@ static int lpc43_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, lpc43_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, lpc43_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/sam34/Kconfig b/arch/arm/src/sam34/Kconfig
index 1f1f423e85..df13714792 100644
--- a/arch/arm/src/sam34/Kconfig
+++ b/arch/arm/src/sam34/Kconfig
@@ -1136,9 +1136,8 @@ config SAM34_SPI_REGDEBUG
 endmenu # AT91SAM3/4 SPI device driver options
 endif # SAM34_SPI0 || SAM34_SPI1
 
-if SAM34_EMAC
-
 menu "AT91SAM3/4 EMAC device driver options"
+	depends on SAM34_EMAC
 
 config SAM34_EMAC_NRXBUFFERS
 	int "Number of RX buffers"
@@ -1332,6 +1331,30 @@ config SAM34_EMAC_PHYSR_100FD
 		This must be provided if SAM34_EMAC_AUTONEG is defined.  This is the value
 		under the bit mask that represents the 100Mbps, full duplex setting.
 
+config SAM34_EMAC_ISETH0
+	bool
+	default y
+
+choice
+	prompt "Work queue"
+	default SAM34_EMAC_LPWORK if SCHED_LPWORK
+	default SAM34_EMAC_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config SAM34_EMAC_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config SAM34_EMAC_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
+
 config SAM34_EMAC_REGDEBUG
 	bool "Register-Level Debug"
 	default n
@@ -1339,13 +1362,7 @@ config SAM34_EMAC_REGDEBUG
 	---help---
 		Enable very low-level register access debug.  Depends on CONFIG_DEBUG_NET_INFO.
 
-config SAM34_EMAC_ISETH0
-	bool
-	default y if !SAM34_EMAC || !SAM34_GMAC_ISETH0
-	default n if SAM34_EMAC && SAM34_GMAC_ISETH0
-
 endmenu # EMAC device driver options
-endif # SAM34_EMAC
 
 if SAM34_HSMCI
 menu "AT91SAM3/4 HSMCI device driver options"
diff --git a/arch/arm/src/sam34/sam_emac.c b/arch/arm/src/sam34/sam_emac.c
index a7a9bc2141..15e7b1b4ba 100644
--- a/arch/arm/src/sam34/sam_emac.c
+++ b/arch/arm/src/sam34/sam_emac.c
@@ -97,12 +97,24 @@
  ****************************************************************************/
 /* Configuration ************************************************************/
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_SAM34_EMAC_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_SAM34_EMAC_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_SAM34_EMAC_HPWORK nor CONFIG_SAM34_EMAC_LPWORK defined
+#  endif
 #endif
 
 /* Number of buffer for RX */
@@ -1690,11 +1702,11 @@ static int sam_emac_interrupt(int irq, void *context)
 
   /* Cancel any pending poll work */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the interrupt processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, sam_interrupt_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, sam_interrupt_work, priv, 0);
 
 #else
   /* Process the interrupt now */
@@ -1807,11 +1819,11 @@ static void sam_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, sam_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, sam_txtimeout_work, priv, 0);
 #else
   /* Process the timeout now */
 
@@ -1918,7 +1930,7 @@ static void sam_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, sam_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, sam_poll_work, priv, 0);
     }
   else
     {
@@ -2155,7 +2167,7 @@ static int sam_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, sam_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, sam_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/sama5/Kconfig b/arch/arm/src/sama5/Kconfig
index 121ee991ec..1400aea5c9 100644
--- a/arch/arm/src/sama5/Kconfig
+++ b/arch/arm/src/sama5/Kconfig
@@ -1685,13 +1685,11 @@ config SAMA5_EMACA_REGDEBUG
 endmenu # EMAC device driver options
 endif # SAMA5_EMACA
 
-if SAMA5_EMACB
-
 menu "EMAC device driver options"
-
-if SAMA5_EMAC0
+	depends on SAMA5_EMACB
 
 menu "EMAC0 device driver options"
+	depends on SAMA5_EMAC0
 
 config SAMA5_EMAC0_NRXBUFFERS
 	int "Number of RX buffers"
@@ -1871,11 +1869,9 @@ config SAMA5_EMAC0_PHYSR_FULLDUPLEX
 endif # !SAMA5_EMAC0_PHYSR_ALTCONFIG
 endif # SAMA5_EMAC0_AUTONEG
 endmenu # EMAC0 device driver options
-endif # SAMA5_EMAC0
-
-if SAMA5_EMAC1
 
 menu "EMAC1 device driver options"
+	depends on SAMA5_EMAC1
 
 config SAMA5_EMAC1_NRXBUFFERS
 	int "Number of RX buffers"
@@ -2055,7 +2051,6 @@ config SAMA5_EMAC1_PHYSR_FULLDUPLEX
 endif # !SAMA5_EMAC1_PHYSR_ALTCONFIG
 endif # SAMA5_EMAC1_AUTONEG
 endmenu # EMAC1 device driver options
-endif # SAMA5_EMAC1
 
 # These apply to both EMAC0 and EMAC1
 
@@ -2073,6 +2068,26 @@ config SAMA5_EMACB_NBC
 	---help---
 		Select to disable receipt of broadcast packets.
 
+choice
+	prompt "Work queue"
+	default SAMA5_EMACB_LPWORK if SCHED_LPWORK
+	default SAMA5_EMACB_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config SAMA5_EMACB_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config SAMA5_EMACB_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
+
 config SAMA5_EMACB_DEBUG
 	bool "Force EMAC0/1 DEBUG"
 	default n
@@ -2092,7 +2107,6 @@ config SAMA5_EMACB_REGDEBUG
 		Enable very low-level register access debug.  Depends on CONFIG_DEBUG_NET_INFO.
 
 endmenu # EMAC device driver options
-endif # SAMA5_EMACB
 
 if SAMA5_EMACA || SAMA5_EMAC0 || SAMA5_EMAC1 || SAMA5_GMAC
 choice
diff --git a/arch/arm/src/sama5/sam_emacb.c b/arch/arm/src/sama5/sam_emacb.c
index ba118484e1..3d9f282ce9 100644
--- a/arch/arm/src/sama5/sam_emacb.c
+++ b/arch/arm/src/sama5/sam_emacb.c
@@ -113,12 +113,24 @@
  ****************************************************************************/
 /* Configuration ************************************************************/
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_SAMA5_EMACB_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_SAMA5_EMACB_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_SAMA5_EMACB_HPWORK nor CONFIG_SAMA5_EMACB_LPWORK defined
+#  endif
 #endif
 
 /* EMAC0 Configuration ******************************************************/
@@ -2098,11 +2110,11 @@ static int sam_emac_interrupt(struct sam_emac_s *priv)
 
   /* Cancel any pending poll work */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the interrupt processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, sam_interrupt_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, sam_interrupt_work, priv, 0);
 
 #else
   /* Process the interrupt now */
@@ -2244,11 +2256,11 @@ static void sam_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, sam_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, sam_txtimeout_work, priv, 0);
 #else
   /* Process the timeout now */
 
@@ -2355,7 +2367,7 @@ static void sam_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, sam_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, sam_poll_work, priv, 0);
     }
   else
     {
@@ -2600,7 +2612,7 @@ static int sam_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, sam_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, sam_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/samv7/Kconfig b/arch/arm/src/samv7/Kconfig
index fc4f513507..9a79ec5428 100644
--- a/arch/arm/src/samv7/Kconfig
+++ b/arch/arm/src/samv7/Kconfig
@@ -1998,6 +1998,26 @@ config SAMV7_EMAC_NBC
 	---help---
 		Select to disable receipt of broadcast packets.
 
+choice
+	prompt "Work queue"
+	default SAMV7_EMAC_LPWORK if SCHED_LPWORK
+	default SAMV7_EMAC_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config SAMV7_EMAC_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config SAMV7_EMAC_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
+
 config SAMV7_EMAC_DEBUG
 	bool "Force EMAC0/1 DEBUG"
 	default n
diff --git a/arch/arm/src/samv7/sam_emac.c b/arch/arm/src/samv7/sam_emac.c
index c246140138..2eefdcefa7 100644
--- a/arch/arm/src/samv7/sam_emac.c
+++ b/arch/arm/src/samv7/sam_emac.c
@@ -103,12 +103,24 @@
  ****************************************************************************/
 /* Configuration ************************************************************/
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_SAMV7_EMAC_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_SAMV7_EMAC_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_SAMV7_EMAC_HPWORK nor CONFIG_SAMV7_EMAC_LPWORK defined
+#  endif
 #endif
 
 /* EMAC0 Configuration ******************************************************/
@@ -2544,11 +2556,11 @@ static int sam_emac_interrupt(struct sam_emac_s *priv)
 
   /* Cancel any pending poll work */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the interrupt processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, sam_interrupt_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, sam_interrupt_work, priv, 0);
 
 #else
   /* Process the interrupt now */
@@ -2691,11 +2703,11 @@ static void sam_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, sam_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, sam_txtimeout_work, priv, 0);
 #else
   /* Process the timeout now */
 
@@ -2802,7 +2814,7 @@ static void sam_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, sam_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, sam_poll_work, priv, 0);
     }
   else
     {
@@ -3050,7 +3062,7 @@ static int sam_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, sam_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, sam_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/samv7/sam_ethernet.c b/arch/arm/src/samv7/sam_ethernet.c
index 0137b16115..847099fb92 100644
--- a/arch/arm/src/samv7/sam_ethernet.c
+++ b/arch/arm/src/samv7/sam_ethernet.c
@@ -44,26 +44,6 @@
 
 #ifdef CONFIG_NET
 
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/****************************************************************************
- * Private Types
- ****************************************************************************/
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-/****************************************************************************
- * Private Function Prototypes
- ****************************************************************************/
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
 /****************************************************************************
  * Public Functions
  ****************************************************************************/
diff --git a/arch/arm/src/stm32/Kconfig b/arch/arm/src/stm32/Kconfig
index c0dc163d30..57165d8ab0 100644
--- a/arch/arm/src/stm32/Kconfig
+++ b/arch/arm/src/stm32/Kconfig
@@ -6146,8 +6146,8 @@ config RTC_HSECLOCK
 
 endchoice
 
-if STM32_ETHMAC
 menu "Ethernet MAC configuration"
+	depends on STM32_ETHMAC
 
 config STM32_PHYADDR
 	int "PHY address"
@@ -6351,6 +6351,26 @@ config STM32_RMII_EXTCLK
 
 endchoice
 
+choice
+	prompt "Work queue"
+	default STM32_ETHMAC_LPWORK if SCHED_LPWORK
+	default STM32_ETHMAC_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config STM32_ETHMAC_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config STM32_ETHMAC_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
+
 config STM32_ETHMAC_REGDEBUG
 	bool "Register-Level Debug"
 	default n
@@ -6358,8 +6378,7 @@ config STM32_ETHMAC_REGDEBUG
 	---help---
 		Enable very low-level register access debug.  Depends on CONFIG_DEBUG_FEATURES.
 
-endmenu
-endif
+endmenu # Ethernet MAC configuration
 
 menu "USB FS Host Configuration"
 
diff --git a/arch/arm/src/stm32/stm32_eth.c b/arch/arm/src/stm32/stm32_eth.c
index abf911f7ac..635940ac95 100644
--- a/arch/arm/src/stm32/stm32_eth.c
+++ b/arch/arm/src/stm32/stm32_eth.c
@@ -93,12 +93,24 @@
 #  error "Logic to support multiple Ethernet interfaces is incomplete"
 #endif
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_STM32_ETHMAC_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_STM32_ETHMAC_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_STM32_ETHMAC_HPWORK nor CONFIG_STM32_ETHMAC_LPWORK defined
+#  endif
 #endif
 
 #if !defined(CONFIG_STM32_SYSCFG) && !defined(CONFIG_STM32_CONNECTIVITYLINE)
@@ -2139,11 +2151,11 @@ static int stm32_interrupt(int irq, FAR void *context)
 
       /* Cancel any pending poll work */
 
-      work_cancel(HPWORK, &priv->work);
+      work_cancel(ETHWORK, &priv->work);
 
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, stm32_interrupt_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, stm32_interrupt_work, priv, 0);
     }
 
 #else
@@ -2259,11 +2271,11 @@ static void stm32_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, stm32_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, stm32_txtimeout_work, priv, 0);
 
 #else
   /* Process the timeout now */
@@ -2403,7 +2415,7 @@ static void stm32_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, stm32_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, stm32_poll_work, priv, 0);
     }
   else
     {
@@ -2618,7 +2630,7 @@ static int stm32_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, stm32_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, stm32_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/stm32f7/Kconfig b/arch/arm/src/stm32f7/Kconfig
index ced8f62ca3..1723b9dad0 100644
--- a/arch/arm/src/stm32f7/Kconfig
+++ b/arch/arm/src/stm32f7/Kconfig
@@ -4436,8 +4436,8 @@ config STM32F7_ADC3_DMA
 
 endmenu # "ADC Configuration"
 
-if STM32F7_ETHMAC
 menu "Ethernet MAC configuration"
+	depends on STM32F7_ETHMAC
 
 config STM32F7_PHYADDR
 	int "PHY address"
@@ -4619,7 +4619,27 @@ config STM32F7_RMII_EXTCLK
 	---help---
 		Clocking is provided by external logic.
 
-endchoice
+endchoice # RMII clock configuration
+
+choice
+	prompt "Work queue"
+	default STM32F7_ETHMAC_LPWORK if SCHED_LPWORK
+	default STM32F7_ETHMAC_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config STM32F7_ETHMAC_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config STM32F7_ETHMAC_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
 
 config STM32F7_ETHMAC_REGDEBUG
 	bool "Register-Level Debug"
@@ -4628,6 +4648,5 @@ config STM32F7_ETHMAC_REGDEBUG
 	---help---
 		Enable very low-level register access debug.  Depends on CONFIG_DEBUG_FEATURES.
 
-endmenu
-endif # STM32F7_ETHMAC
+endmenu # Ethernet MAC configuration
 endif # ARCH_CHIP_STM32F7
diff --git a/arch/arm/src/stm32f7/stm32_ethernet.c b/arch/arm/src/stm32f7/stm32_ethernet.c
index 0d4485ac26..eccf15b348 100644
--- a/arch/arm/src/stm32f7/stm32_ethernet.c
+++ b/arch/arm/src/stm32f7/stm32_ethernet.c
@@ -94,12 +94,24 @@
 #  error "Logic to support multiple Ethernet interfaces is incomplete"
 #endif
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_STM32F7_ETHMAC_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_STM32F7_ETHMAC_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_STM32F7_ETHMAC_HPWORK nor CONFIG_STM32F7_ETHMAC_LPWORK defined
+#  endif
 #endif
 
 #ifndef CONFIG_STM32F7_PHYADDR
@@ -2252,11 +2264,11 @@ static int stm32_interrupt(int irq, void *context)
 
       /* Cancel any pending poll work */
 
-      work_cancel(HPWORK, &priv->work);
+      work_cancel(ETHWORK, &priv->work);
 
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, stm32_interrupt_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, stm32_interrupt_work, priv, 0);
     }
 
 #else
@@ -2372,11 +2384,11 @@ static void stm32_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, stm32_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, stm32_txtimeout_work, priv, 0);
 
 #else
   /* Process the timeout now */
@@ -2516,7 +2528,7 @@ static void stm32_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, stm32_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, stm32_poll_work, priv, 0);
     }
   else
     {
@@ -2732,7 +2744,7 @@ static int stm32_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, stm32_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, stm32_txavail_work, priv, 0);
     }
 
 #else
diff --git a/arch/arm/src/tiva/Kconfig b/arch/arm/src/tiva/Kconfig
index 174252528b..78a7ae07f1 100644
--- a/arch/arm/src/tiva/Kconfig
+++ b/arch/arm/src/tiva/Kconfig
@@ -1100,6 +1100,25 @@ config TIVA_EMAC_HWCHECKSUM
 	---help---
 		Use the hardware checksum capabilities of the Tiva chip
 
+choice
+	prompt "Work queue"
+	default TIVA_ETHERNET_LPWORK if SCHED_LPWORK
+	default TIVA_ETHERNET_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
+	depends on SCHED_WORKQUEUE
+	---help---
+		Work queue support is required to use the Ethernet driver.  If the
+		low priority work queue is available, then it should be used by the
+		driver.
+
+config TIVA_ETHERNET_HPWORK
+	bool "High priority"
+	depends on SCHED_HPWORK
+
+config TIVA_ETHERNET_LPWORK
+	bool "Low priority"
+	depends on SCHED_LPWORK
+
+endchoice # Work queue
 config TIVA_ETHERNET_REGDEBUG
 	bool "Register-Level Debug"
 	default n
diff --git a/arch/arm/src/tiva/tm4c_ethernet.c b/arch/arm/src/tiva/tm4c_ethernet.c
index e7d7d0a67b..3882a95db3 100644
--- a/arch/arm/src/tiva/tm4c_ethernet.c
+++ b/arch/arm/src/tiva/tm4c_ethernet.c
@@ -98,12 +98,24 @@
 #  error Logic to support multiple Ethernet interfaces is incomplete
 #endif
 
-/* If processing is not done at the interrupt level, then high priority
- * work queue support is required.
+/* If processing is not done at the interrupt level, then work queue support
+ * is required.
  */
 
-#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_HPWORK)
-#  error High priority work queue support is required
+#if defined(CONFIG_NET_NOINTS) && !defined(CONFIG_SCHED_WORKQUEUE)
+#  error Work queue support is required
+#endif
+
+/* Select work queue */
+
+#if defined(CONFIG_SCHED_WORKQUEUE)
+#  if defined(CONFIG_TIVA_ETHERNET_HPWORK)
+#    define ETHWORK HPWORK
+#  elif defined(CONFIG_TIVA_ETHERNET_LPWORK)
+#    define ETHWORK LPWORK
+#  else
+#    error Neither CONFIG_TIVA_ETHERNET_HPWORK nor CONFIG_TIVA_ETHERNET_LPWORK defined
+#  endif
 #endif
 
 /* Are we using the internal PHY or an external PHY? */
@@ -2167,11 +2179,11 @@ static int tiva_interrupt(int irq, FAR void *context)
 
       /* Cancel any pending poll work */
 
-      work_cancel(HPWORK, &priv->work);
+      work_cancel(ETHWORK, &priv->work);
 
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, tiva_interrupt_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, tiva_interrupt_work, priv, 0);
     }
 
 #else
@@ -2303,11 +2315,11 @@ static void tiva_txtimeout_expiry(int argc, uint32_t arg, ...)
    * on work that has already been started.
    */
 
-  work_cancel(HPWORK, &priv->work);
+  work_cancel(ETHWORK, &priv->work);
 
   /* Schedule to perform the TX timeout processing on the worker thread. */
 
-  work_queue(HPWORK, &priv->work, tiva_txtimeout_work, priv, 0);
+  work_queue(ETHWORK, &priv->work, tiva_txtimeout_work, priv, 0);
 
 #else
   /* Process the timeout now */
@@ -2447,7 +2459,7 @@ static void tiva_poll_expiry(int argc, uint32_t arg, ...)
     {
       /* Schedule to perform the interrupt processing on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, tiva_poll_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, tiva_poll_work, priv, 0);
     }
   else
     {
@@ -2662,7 +2674,7 @@ static int tiva_txavail(struct net_driver_s *dev)
     {
       /* Schedule to serialize the poll on the worker thread. */
 
-      work_queue(HPWORK, &priv->work, tiva_txavail_work, priv, 0);
+      work_queue(ETHWORK, &priv->work, tiva_txavail_work, priv, 0);
     }
 
 #else
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9bb451ab3a..5bcb225dd0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -24,7 +24,9 @@ choice
 	default LOOPBACK_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
 	depends on SCHED_WORKQUEUE
 	---help---
-		Work queue support is required to use the LOOPBACK driver.  If the low priority work queue is available, then it should be used by the LOOPBACK.
+		Work queue support is required to use the loopback driver.  If the
+		low priority work queue is available, then it should be used by the
+		loopback driver.
 
 config LOOPBACK_HPWORK
 	bool "High priority"
@@ -245,7 +247,9 @@ choice
 	default ENC28J60_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
 	depends on SCHED_WORKQUEUE
 	---help---
-		Work queue support is required to use the ENC28J60 driver.  If the low priority work queue is available, then it should be used by the ENC28J60.
+		Work queue support is required to use the ENC28J60 driver.  If the
+		low priority work queue is available, then it should be used by the
+		ENC28J60 driver.
 
 config ENC28J60_HPWORK
 	bool "High priority"
@@ -332,7 +336,9 @@ choice
 	default ENCX24J600_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
 	depends on SCHED_WORKQUEUE
 	---help---
-		Work queue support is required to use the ENCX24J600 driver.  If the low priority work queue is available, then it should be used by the ENCX24J600.
+		Work queue support is required to use the ENCX24J600 driver.  If the
+		low priority work queue is available, then it should be used by the
+		ENCX24J600 driver.
 
 config ENCX24J600_HPWORK
 	bool "High priority"
@@ -444,7 +450,9 @@ choice
 	default FTMAC100_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
 	depends on SCHED_WORKQUEUE
 	---help---
-		Work queue support is required to use the FTMAC100 driver.  If the low priority work queue is available, then it should be used by the FTMAC100.
+		Work queue support is required to use the FTMAC100 driver.  If the
+		low priority work queue is available, then it should be used by the
+		FTMAC100 driver.
 
 config FTMAC100_HPWORK
 	bool "High priority"
diff --git a/net/Kconfig b/net/Kconfig
index 2c1aecd291..a216650c76 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -247,7 +247,9 @@ choice
 	default TUN_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
 	depends on SCHED_WORKQUEUE
 	---help---
-		Work queue support is required to use the TUN driver.  If the low priority work queue is available, then it should be used by the TUN.
+		Work queue support is required to use the TUN driver.  If the
+		low priority work queue is available, then it should be used by the
+		TUN driver.
 
 config TUN_HPWORK
 	bool "High priority"