Initial lpc214x support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@193 42af7a65-404d-4744-a932-0658087f49c3

configs/mcu123-lpc214x/Make.defs

@@ -0,0 +1,71 @@
+############################################################
+# Make.defs
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################
+
+include ${TOPDIR}/.config
+
+ifeq ("${CONFIG_DEBUG}","y")
+  ARCHOPTIMIZATION	= -g
+else
+  ARCHOPTIMIZATION	= -Os -fno-strict-aliasing -fno-strength-reduce \
+			  -fomit-frame-pointer
+endif
+
+ARCHCPUFLAGS		= -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin
+ARCHPICFLAGS		= -fpic
+ARCHWARNINGS		= -Wall -Wstrict-prototypes -Wshadow
+ARCHDEFINES		=
+ARCHINCLUDES		= -I. -isystem $(TOPDIR)/include
+ARCHSCRIPT		= -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ld.script
+
+CROSSDEV		= arm-elf-
+CC			= $(CROSSDEV)gcc
+LD			= $(CROSSDEV)ld
+AR			= $(CROSSDEV)ar rcs
+NM			= $(CROSSDEV)nm
+OBJCOPY			= $(CROSSDEV)objcopy
+OBJDUMP			= $(CROSSDEV)objdump
+
+CFLAGS			= $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
+			  $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+
+OBJEXT			= .o
+LIBEXT			= .a
+EXEEXT			=
+
+ifeq ("${CONFIG_DEBUG}","y")
+  LDFLAGS		+= -g
+endif
+
+

configs/mcu123-lpc214x/defconfig

@@ -0,0 +1,248 @@
+############################################################
+# defconfig
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_name - for use in C code.  This identifies the
+#   particular chip or SoC that the architecture is implemented
+#   in.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to lpc2148.
+# CONFIG_DRAM_SIZE - Describes the internal DRAM.
+# CONFIG_DRAM_START - The start address of internal DRAM
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_CHIP=lpc214x
+CONFIG_ARCH_LPC2148=y
+CONFIG_ARCH_BOARD=mcu123-lpc214x
+CONFIG_ARCH_BOARD_MCU123=y
+CONFIG_BOARD_LOOPSPERMSEC=1250
+CONFIG_ARCH_LEDS=n
+CONFIG_DRAM_SIZE=0x02000000
+CONFIG_DRAM_START=0x40000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_STACKDUMP=y
+
+#
+# LPC2148 specific chip initialization
+#
+CONFIG_EXTMEM_MODE=n
+CONFIG_RAM_MODE=n
+CONFIG_CODE_BASE=0x00000000
+CONFIG_PLL_SETUP=y
+CONFIG_MAM_SETUP=y
+CONFIG_VPBDIV_SETUP=y
+CONFIG_EMC_SETUP=n
+CONFIG_BCFG0_SETUP=n
+CONFIG_BCFG1_SETUP=n
+CONFIG_BCFG2_SETUP=n
+CONFIG_BCFG3_SETUP=n
+
+#
+# General OS setup
+#
+# CONFIG_EXAMPLE - identifies the subdirectory in examples
+#   that will be used in the build
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+#
+CONFIG_EXAMPLE=ostest
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2007
+CONFIG_START_MONTH=2
+CONFIG_START_DAY=13
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve sysem performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com
+#
+CONFIG_RRLOAD_BINARY=y
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=64
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=32
+CONFIG_NFILE_STREAMS=16
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=1024
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=32
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=4
+CONFIG_PREALLOC_WDOGS=32
+CONFIG_PREALLOC_TIMERS=8
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
+#   operation from FLASH.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_PROC_STACK_SIZE - The size of the initial stack
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_FROM_FLASH=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_PROC_STACK_SIZE=4096
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=4096
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=

configs/mcu123-lpc214x/include/README.txt

@@ -0,0 +1 @@
+This directory contains header files unique to the MCU123 LPC2148 board.

configs/mcu123-lpc214x/include/board.h

@@ -0,0 +1,59 @@
+/************************************************************
+ * board/board.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+# include <sys/types.h>
+#endif
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* Clocking *************************************************/
+
+/* LED definitions ******************************************/
+
+/************************************************************
+ * Inline Functions
+ ************************************************************/
+
+#endif  /* __ARCH_BOARD_BOARD_H */

configs/mcu123-lpc214x/ld.script

@@ -0,0 +1,84 @@
+/************************************************************
+ * ld.script
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+	/* The OS entry point is here (default MEMMAP mode assumed) */
+
+	. = 0x00000000;
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.text)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)			/* Global offset table		*/
+		_etext = ABSOLUTE(.);
+	}
+
+	_eronly = ABSOLUTE(.);		/* See below                    */
+	. = ALIGN(4096);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	}
+
+	.bss : {			/* BSS				*/
+		_sbss = ABSOLUTE(.);
+		*(.bss)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	}
+					/* Stabs debugging sections.	*/
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

configs/mcu123-lpc214x/setenv.sh

@@ -0,0 +1,46 @@
+#!/bin/sh
+# setenv.sh
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
+
+WD=`pwd`
+export BUILDROOT_BIN=${WD}/../buildroot/build_arm_nofpu/staging_dir/bin
+export PATH=${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}
+
+echo "PATH : ${PATH}"

configs/mcu123-lpc214x/src/Makefile

@@ -0,0 +1,79 @@
+############################################################
+# Makefile
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################
+
+-include $(TOPDIR)/Make.defs
+
+MKDEP 		= $(TOPDIR)/tools/mkdeps.sh
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+CFLAGS		+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(TOPDIR)/sched
+
+ASRCS		= 
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+CSRCS		= up_leds.c
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+CFLAGS		+= -I $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(CC) -c $(CFLAGS) -D__ASSEMBLY__ $< -o $@
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(CC) -c $(CFLAGS) $< -o $@
+
+libboard$(LIBEXT): $(OBJS)
+	( for obj in $(OBJS) ; do \
+		$(AR) $@ $${obj} || \
+			{ echo "$(AR) $@ $obj FAILED!" ; exit 1 ; } ; \
+	done ; )
+
+.depend: Makefile $(SRCS)
+	$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	touch $@
+
+depend: .depend
+
+clean:
+	rm -f libboard$(LIBEXT) *~
+	if [ ! -z "$(OBJEXT)" ]; then rm -f *$(OBJEXT); fi
+
+distclean: clean
+	rm -f Make.dep .depend
+
+-include Make.dep

configs/mcu123-lpc214x/src/README.txt

@@ -0,0 +1,2 @@
+This directory contains drivers unique to the MCU123 LPC2148 board.
+

configs/mcu123-lpc214x/src/up_leds.c

@@ -0,0 +1,84 @@
+/************************************************************
+ * board/up_leds.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_ledinit
+ ************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+void up_ledinit(void)
+{
+}
+
+/************************************************************
+ * Name: up_ledon
+ ************************************************************/
+
+void up_ledon(int led)
+{
+}
+
+/************************************************************
+ * Name: up_ledoff
+ ************************************************************/
+
+void up_ledoff(int led)
+{
+}
+#endif /* CONFIG_ARCH_LEDS */