SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default
This commit is contained in:
Gregory Nutt
parent
b12f75aa5a
commit
0bd5f23a30
@ -6978,6 +6978,13 @@
|
||||
* configs/spark: Refresh all spark configurations (2014-3-11).
|
||||
* arch/arm/src/tiva/chip/tm4c_memorymap.h: Fix typos reported by
|
||||
Daniel Pereira de Carvalho (2014-2-12).
|
||||
* arch/arm/src/sam34/sam_emac.c: Add an Ethernet MAC driver for the
|
||||
SAM4E. The initial checkin is essentially the SAMA5D3 EMAC driver
|
||||
with naming changes as appropriate (2014-3-12).
|
||||
* arch/arm/src/sam34/sam_cmcc.c: Add logic to manage the Cortex-M
|
||||
Cache Control block. Untested on initial check-in (2014-3-12).
|
||||
|
||||
* arch/arm/src/sam34/sam_emac.c: Fix EMAC pin configuration (was been
|
||||
set up for RMII instead of MII). Now the driver EMAC appears to be
|
||||
functional (2014-3-13).
|
||||
* configs/sam4e-ek/nsh: Networking support is now enabled by default
|
||||
in the NSH configuration (2014-3-13).
|
||||
|
||||
@ -3123,12 +3123,16 @@ Mem: 29232 5920 23312 23312
|
||||
<p>
|
||||
<b>Atmel SAM4E-EK</b>.
|
||||
Board support was added for the SAM4E-EK development board in NuttX 6.33.
|
||||
A fully functional NuttShell (NSH) configuration is avaiable
|
||||
A fully functional NuttShell (NSH) configuration is available
|
||||
(see the <a href="http://www.nuttx.org/Documentation/NuttShell.html">NSH User Guide</a>).
|
||||
This is very much a work in progress.
|
||||
An Ethernet MAC driver is in place and under test now.
|
||||
Refer to the NuttX board <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/sam4e-ek/README.txt">README</a> file for further information.
|
||||
</p>
|
||||
<ul>
|
||||
<b>STATUS</b>.
|
||||
This is very much a work in progress.
|
||||
The SAM4E-EK should be compatible with most of the other SAM3/4 drivers (like SPI, HSMCI, DMAC, etc.) but those have not be verified on the SAM4E-EK as of this writing.
|
||||
A new Ethernet MAC driver has been developed and is functional, although it has not yet received a lot of testing.
|
||||
Refer to the NuttX board <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/sam4e-ek/README.txt">README</a> file for further information.
|
||||
</ul>
|
||||
</td>
|
||||
</tr>
|
||||
<tr>
|
||||
|
||||
@ -2494,7 +2494,7 @@ static int sam_phyinit(struct sam_emac_s *priv)
|
||||
* Function: sam_ethgpioconfig
|
||||
*
|
||||
* Description:
|
||||
* Configure GPIOs for the EMAC interface.
|
||||
* Configure GPIOs for the EMAC MII interface.
|
||||
*
|
||||
* Parameters:
|
||||
* priv - A reference to the private driver state structure
|
||||
@ -2508,19 +2508,26 @@ static int sam_phyinit(struct sam_emac_s *priv)
|
||||
|
||||
static inline void sam_ethgpioconfig(struct sam_emac_s *priv)
|
||||
{
|
||||
/* Configure PIO pins to support EMAC */
|
||||
/* Configure EMAC PIO pins common to both MII and RMII */
|
||||
/* Configure PIO pins to support EMAC in MII mode*/
|
||||
|
||||
sam_configgpio(GPIO_EMAC_TX0);
|
||||
sam_configgpio(GPIO_EMAC_TX1);
|
||||
sam_configgpio(GPIO_EMAC_RX0);
|
||||
sam_configgpio(GPIO_EMAC_RX1);
|
||||
sam_configgpio(GPIO_EMAC_TXEN);
|
||||
sam_configgpio(GPIO_EMAC_CRSDV);
|
||||
sam_configgpio(GPIO_EMAC_RXER);
|
||||
sam_configgpio(GPIO_EMAC_REFCK);
|
||||
sam_configgpio(GPIO_EMAC_MDC);
|
||||
sam_configgpio(GPIO_EMAC_MDIO);
|
||||
sam_configgpio(GPIO_EMAC_TXCK); /* Transmit Clock (or Reference Clock) */
|
||||
sam_configgpio(GPIO_EMAC_TXEN); /* Transmit Enable */
|
||||
sam_configgpio(GPIO_EMAC_TX0); /* Transmit data TXD0 */
|
||||
sam_configgpio(GPIO_EMAC_TX1); /* Transmit data TXD1 */
|
||||
sam_configgpio(GPIO_EMAC_TX2); /* Transmit data TXD2 */
|
||||
sam_configgpio(GPIO_EMAC_TX3); /* Transmit data TXD3 */
|
||||
//sam_configgpio(GPIO_EMAC_TXER); /* Transmit Coding Error */
|
||||
sam_configgpio(GPIO_EMAC_RXCK); /* Receive Clock */
|
||||
sam_configgpio(GPIO_EMAC_RXDV); /* Receive Data Valid */
|
||||
sam_configgpio(GPIO_EMAC_RX0); /* Receive data RXD0 */
|
||||
sam_configgpio(GPIO_EMAC_RX1); /* Receive data RXD0 */
|
||||
sam_configgpio(GPIO_EMAC_RX2); /* Receive data RXD0 */
|
||||
sam_configgpio(GPIO_EMAC_RX3); /* Receive data RXD0 */
|
||||
sam_configgpio(GPIO_EMAC_RXER); /* Receive Error */
|
||||
sam_configgpio(GPIO_EMAC_CRS); /* Carrier Sense and Data Valid */
|
||||
sam_configgpio(GPIO_EMAC_COL); /* Collision Detect */
|
||||
sam_configgpio(GPIO_EMAC_MDC); /* Management Data Clock */
|
||||
sam_configgpio(GPIO_EMAC_MDIO); /* Management Data Input/Output */
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
@ -2847,7 +2854,7 @@ void up_netinitialize(void)
|
||||
if (!priv->txpoll)
|
||||
{
|
||||
nlldbg("ERROR: Failed to create periodic poll timer\n");
|
||||
goto errout;
|
||||
return;
|
||||
}
|
||||
|
||||
priv->txtimeout = wd_create(); /* Create TX timeout timer */
|
||||
@ -2857,7 +2864,7 @@ void up_netinitialize(void)
|
||||
goto errout_with_txpoll;
|
||||
}
|
||||
|
||||
/* Configure PIO pins to support EMAC */
|
||||
/* Configure PIO pins to support EMAC MII */
|
||||
|
||||
sam_ethgpioconfig(priv);
|
||||
|
||||
@ -2899,7 +2906,7 @@ void up_netinitialize(void)
|
||||
ret = netdev_register(&priv->dev);
|
||||
if (ret >= 0)
|
||||
{
|
||||
return ret;
|
||||
return;
|
||||
}
|
||||
|
||||
nlldbg("ERROR: netdev_register() failed: %d\n", ret);
|
||||
@ -2910,8 +2917,6 @@ errout_with_txtimeout:
|
||||
wd_delete(priv->txtimeout);
|
||||
errout_with_txpoll:
|
||||
wd_delete(priv->txpoll);
|
||||
errout:
|
||||
return ret;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_NET && CONFIG_SAM34_EMAC */
|
||||
|
||||
@ -398,12 +398,26 @@ Networking
|
||||
: Defaults should be okay for other options
|
||||
Application Configuration -> NSH Library
|
||||
CONFIG_NSH_TELNET=y : Enable NSH session via Telnet
|
||||
CONFIG_NSH_IPADDR=0x0a000002 : Select an IP address
|
||||
CONFIG_NSH_IPADDR=0x0a000002 : Select a fixed IP address
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001 : IP address of gateway/host PC
|
||||
CONFIG_NSH_NETMASK=0xffffff00 : Netmask
|
||||
CONFIG_NSH_NOMAC=y : Need to make up a bogus MAC address
|
||||
: Defaults should be okay for other options
|
||||
|
||||
You can also enable enable the DHCPC client for networks that use
|
||||
dynamically assigned address:
|
||||
|
||||
Application Configuration -> Network Utilities
|
||||
CONFIG_NETUTILS_DHCPC=y : Enables the DHCP client
|
||||
|
||||
Networking Support
|
||||
CONFIG_NET_UDP=y : Depends on broadcast UDP
|
||||
|
||||
Application Configuration -> NSH Library
|
||||
CONFIG_NET_BROADCAST=y
|
||||
CONFIG_NSH_DHCPC=y : Tells NSH to use DHCPC, not
|
||||
: the fixed addresses
|
||||
|
||||
Using the network with NSH
|
||||
--------------------------
|
||||
|
||||
@ -485,8 +499,8 @@ Networking
|
||||
so that access to the NSH prompt is not delayed.
|
||||
|
||||
This delay will be especially long if the board is not connected to
|
||||
a network.
|
||||
|
||||
a network because additional time will be required to fail with timeout
|
||||
errors.
|
||||
|
||||
SAM4E-EK-specific Configuration Options
|
||||
=======================================
|
||||
@ -688,23 +702,17 @@ Configurations
|
||||
2. Unless stated otherwise, all configurations generate console
|
||||
output on UART0 (J3).
|
||||
|
||||
3. Unless otherwise stated, the configurations are setup for
|
||||
Linux (or any other POSIX environment like Cygwin under Windows):
|
||||
|
||||
Build Setup:
|
||||
CONFIG_HOST_LINUX=y : Linux or other POSIX environment
|
||||
|
||||
4. All of these configurations use the older, OABI, buildroot toolchain
|
||||
(unless stated otherwise in the description of the configuration). That
|
||||
toolchain selection can easily be reconfigured using 'make menuconfig'.
|
||||
Here are the relevant current settings:
|
||||
3. All of these configurations are set up to build under Linux using the
|
||||
EABI buildroot toolchain (unless stated otherwise in the description of
|
||||
the configuration). That build selection can easily be reconfigured
|
||||
using 'make menuconfig'. Here are the relevant current settings:
|
||||
|
||||
Build Setup:
|
||||
CONFIG_HOST_LINUX=y : Linux or other pure POSIX invironment
|
||||
: (including Cygwin)
|
||||
|
||||
System Type -> Toolchain:
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=n : EABI (Not OABI
|
||||
|
||||
If you want to use the Atmel GCC toolchain, for example, here are the
|
||||
steps to do so:
|
||||
@ -753,7 +761,39 @@ Configurations
|
||||
Applicaton Configuration:
|
||||
CONFIG_NSH_BUILTIN_APPS=y : Enable starting apps from NSH command line
|
||||
|
||||
2. This configuration has been used for verifying the touchscreen on
|
||||
2. This configuration has the network enabled by default. This can be
|
||||
easily disabled or reconfigured (See see the network related
|
||||
configuration settings above in the section entitled "Networking").
|
||||
|
||||
NOTE: In boot-up sequence is very simple in this example; all
|
||||
initialization is done sequential (vs. in parallel) and so you will
|
||||
not see the NSH prompt until all initialization is complete. The
|
||||
network bring-up in particular will add some delay before the NSH
|
||||
prompt appears. In a real application, you would probably want to
|
||||
do the network bringup on a separate thread so that access to the
|
||||
NSH prompt is not delayed.
|
||||
|
||||
This delay will be especially long if the board is not connected to
|
||||
a network because additional time will be required to fail with
|
||||
timeout errors.
|
||||
|
||||
3. This configuration supports a network with fixed IP address. You
|
||||
may have to change these settings for your network:
|
||||
|
||||
CONFIG_NSH_IPADDR=0x0a000002 : IP address: 10.0.0.2
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001 : Gateway: 10.0.0.1
|
||||
CONFIG_NSH_NETMASK=0xffffff00 : Netmask: 255.255.255.0
|
||||
|
||||
You can also enable enable the DHCPC client for networks that use
|
||||
dynamically assigned address:
|
||||
|
||||
CONFIG_NETUTILS_DHCPC=y : Enables the DHCP client
|
||||
CONFIG_NET_UDP=y : Depends on broadcast UDP
|
||||
CONFIG_NET_BROADCAST=y
|
||||
CONFIG_NSH_DHCPC=y : Tells NSH to use DHCPC, not
|
||||
: the fixed addresses
|
||||
|
||||
4. This configuration has been used for verifying the touchscreen on
|
||||
on the SAM4E-EK LCD. With these modifications, you can include the
|
||||
touchscreen test program at apps/examples/touchscreen as an NSH built-in
|
||||
application. You can enable the touchscreen and test by modifying the
|
||||
@ -797,7 +837,7 @@ Configurations
|
||||
CONFIG_DEBUG_VERBOSE=y : Enable verbose debug output
|
||||
CONFIG_DEBUG_INPUT=y : Enable debug output from input devices
|
||||
|
||||
3. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card
|
||||
4. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card
|
||||
slot. Support for the SD slot can be enabled with the following
|
||||
settings:
|
||||
|
||||
@ -824,14 +864,7 @@ Configurations
|
||||
CONFIG_NSH_ARCHINIT=y : NSH board-initialization
|
||||
|
||||
STATUS:
|
||||
2013-6-28: The touchscreen is functional.
|
||||
2013-6-29: Hmmm... but there appear to be conditions when the
|
||||
touchscreen driver locks up. Looks like some issue with
|
||||
managing the interrupts.
|
||||
2013-6-30: Those lock-ups appear to be due to poorly placed
|
||||
debug output statements. If you do not enable debug output,
|
||||
the touchscreen is rock-solid.
|
||||
2013-8-10: Added the comments above above enabling HSMCI memory
|
||||
card support and verified that the configuration builds without
|
||||
error. However, that configuration has not yet been tested (and
|
||||
is may even be incomplete).
|
||||
2014-3-13: The basic NSH serial console is working. Network support
|
||||
has been verified. HSMCI and touchscreen have not been tested (the
|
||||
above notes came from the SAM3U-EK and have not been yet been tested
|
||||
on the SAM4E-EK).
|
||||
|
||||
@ -12,6 +12,10 @@ CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
# CONFIG_WINDOWS_CYGWIN is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
@ -105,15 +109,22 @@ CONFIG_ARCH_HAVE_MPU=y
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
|
||||
# CONFIG_ARMV7M_OABI_TOOLCHAIN is not set
|
||||
# CONFIG_GPIO_IRQ is not set
|
||||
CONFIG_ARCH_HAVE_EXTNAND=y
|
||||
CONFIG_ARCH_HAVE_EXTNOR=y
|
||||
CONFIG_ARCH_HAVE_EXTSRAM0=y
|
||||
# CONFIG_NET_MULTICAST is not set
|
||||
CONFIG_ARCH_HAVE_EXTSRAM1=y
|
||||
|
||||
#
|
||||
@ -167,6 +178,25 @@ CONFIG_ARCH_CHIP_SAM4E=y
|
||||
#
|
||||
# AT91SAM3/4 Peripheral Support
|
||||
#
|
||||
# CONFIG_SAM34_ACC is not set
|
||||
# CONFIG_SAM34_AES is not set
|
||||
# CONFIG_SAM34_AFEC0 is not set
|
||||
# CONFIG_SAM34_AFEC1 is not set
|
||||
# CONFIG_SAM34_CAN0 is not set
|
||||
# CONFIG_SAM34_CAN1 is not set
|
||||
# CONFIG_SAM34_CHIPID is not set
|
||||
# CONFIG_SAM34_CMCC is not set
|
||||
# CONFIG_SAM34_DACC is not set
|
||||
# CONFIG_SAM34_EIC is not set
|
||||
# CONFIG_SAM34_DMAC is not set
|
||||
CONFIG_SAM34_EMAC=y
|
||||
# CONFIG_SAM34_HSMCI is not set
|
||||
# CONFIG_SAM34_NAND is not set
|
||||
# CONFIG_SAM34_PDCA is not set
|
||||
# CONFIG_SAM34_PWM is not set
|
||||
# CONFIG_SAM34_RTC is not set
|
||||
# CONFIG_SAM34_RTT is not set
|
||||
# CONFIG_SAM34_SMC is not set
|
||||
# CONFIG_SAM34_SPI0 is not set
|
||||
# CONFIG_SAM34_TC0 is not set
|
||||
# CONFIG_SAM34_TC1 is not set
|
||||
@ -177,37 +207,19 @@ CONFIG_ARCH_CHIP_SAM4E=y
|
||||
# CONFIG_SAM34_TC6 is not set
|
||||
# CONFIG_SAM34_TC7 is not set
|
||||
# CONFIG_SAM34_TC8 is not set
|
||||
# CONFIG_SAM34_PWM is not set
|
||||
# CONFIG_SAM34_TWIM0 is not set
|
||||
# CONFIG_SAM34_TWIS0 is not set
|
||||
# CONFIG_SAM34_TWIM1 is not set
|
||||
# CONFIG_SAM34_TWIS1 is not set
|
||||
CONFIG_SAM34_UART0=y
|
||||
# CONFIG_SAM34_UART1 is not set
|
||||
# CONFIG_SAM34_UDP is not set
|
||||
# CONFIG_SAM34_USART0 is not set
|
||||
CONFIG_SAM34_USART1=y
|
||||
# CONFIG_SAM34_AFEC0 is not set
|
||||
# CONFIG_SAM34_AFEC1 is not set
|
||||
# CONFIG_SAM34_DACC is not set
|
||||
# CONFIG_SAM34_ACC is not set
|
||||
# CONFIG_SAM34_AES is not set
|
||||
# CONFIG_SAM34_EMAC is not set
|
||||
# CONFIG_SAM34_CAN0 is not set
|
||||
# CONFIG_SAM34_CAN1 is not set
|
||||
# CONFIG_SAM34_SMC is not set
|
||||
# CONFIG_SAM34_NAND is not set
|
||||
# CONFIG_SAM34_PDCA is not set
|
||||
# CONFIG_SAM34_DMAC is not set
|
||||
# CONFIG_SAM34_UDP is not set
|
||||
# CONFIG_SAM34_CHIPID is not set
|
||||
# CONFIG_SAM34_RTC is not set
|
||||
# CONFIG_SAM34_RTT is not set
|
||||
# CONFIG_SAM34_WDT is not set
|
||||
# CONFIG_SAM34_EIC is not set
|
||||
# CONFIG_SAM34_HSMCI is not set
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
# AT91SAM3/4 External Memory Configuration
|
||||
#
|
||||
# CONFIG_SAM34_EXTNAND is not set
|
||||
# CONFIG_SAM34_EXTNOR is not set
|
||||
@ -218,6 +230,27 @@ CONFIG_SAM34_USART1=y
|
||||
# AT91SAM3/4 GPIO Interrupt Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# AT91SAM3/4 EMAC device driver options
|
||||
#
|
||||
CONFIG_SAM34_EMAC_NRXBUFFERS=16
|
||||
CONFIG_SAM34_EMAC_NTXBUFFERS=8
|
||||
# CONFIG_SAM34_EMAC_PREALLOCATE is not set
|
||||
# CONFIG_SAM34_EMAC_NBC is not set
|
||||
CONFIG_SAM34_EMAC_PHYADDR=1
|
||||
# CONFIG_SAM34_EMAC_PHYINIT is not set
|
||||
CONFIG_SAM34_EMAC_MII=y
|
||||
# CONFIG_SAM34_EMAC_CLAUSE45 is not set
|
||||
CONFIG_SAM34_EMAC_AUTONEG=y
|
||||
CONFIG_SAM34_EMAC_PHYSR=30
|
||||
CONFIG_SAM34_EMAC_PHYSR_ALTCONFIG=y
|
||||
CONFIG_SAM34_EMAC_PHYSR_ALTMODE=0x7
|
||||
CONFIG_SAM34_EMAC_PHYSR_10HD=0x1
|
||||
CONFIG_SAM34_EMAC_PHYSR_100HD=0x2
|
||||
CONFIG_SAM34_EMAC_PHYSR_10FD=0x5
|
||||
CONFIG_SAM34_EMAC_PHYSR_100FD=0x6
|
||||
CONFIG_SAM34_EMAC_ISETH0=y
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
@ -383,6 +416,34 @@ CONFIG_DEV_NULL=y
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
|
||||
#
|
||||
# General Ethernet MAC Driver Options
|
||||
#
|
||||
# CONFIG_NETDEV_MULTINIC is not set
|
||||
|
||||
#
|
||||
# External Ethernet MAC Device Support
|
||||
#
|
||||
# CONFIG_NET_DM90x0 is not set
|
||||
# CONFIG_ENC28J60 is not set
|
||||
# CONFIG_ENCX24J600 is not set
|
||||
# CONFIG_NET_E1000 is not set
|
||||
# CONFIG_NET_SLIP is not set
|
||||
# CONFIG_NET_VNET is not set
|
||||
|
||||
#
|
||||
# External Ethernet PHY Device Support
|
||||
#
|
||||
# CONFIG_ETH0_PHY_NONE is not set
|
||||
# CONFIG_ETH0_PHY_AM79C874 is not set
|
||||
# CONFIG_ETH0_PHY_KS8721 is not set
|
||||
CONFIG_ETH0_PHY_KSZ8051=y
|
||||
# CONFIG_ETH0_PHY_KSZ90x1 is not set
|
||||
# CONFIG_ETH0_PHY_DP83848C is not set
|
||||
# CONFIG_ETH0_PHY_LAN8720 is not set
|
||||
# CONFIG_ETH0_PHY_DM9161 is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
@ -464,9 +525,51 @@ CONFIG_USART1_2STOP=0
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_ARCH_HAVE_NET is not set
|
||||
# CONFIG_ARCH_HAVE_PHY is not set
|
||||
# CONFIG_NET is not set
|
||||
CONFIG_ARCH_HAVE_NET=y
|
||||
CONFIG_ARCH_HAVE_PHY=y
|
||||
CONFIG_NET=y
|
||||
# CONFIG_NET_NOINTS is not set
|
||||
# CONFIG_NET_MULTIBUFFER is not set
|
||||
# CONFIG_NET_PROMISCUOUS is not set
|
||||
CONFIG_NSOCKET_DESCRIPTORS=8
|
||||
CONFIG_NET_NACTIVESOCKETS=16
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
# CONFIG_NET_SOLINGER is not set
|
||||
CONFIG_NET_BUFSIZE=562
|
||||
# CONFIG_NET_TCPURGDATA is not set
|
||||
|
||||
#
|
||||
# TCP/IP Networking
|
||||
#
|
||||
CONFIG_NET_TCP=y
|
||||
CONFIG_NET_TCP_CONNS=16
|
||||
CONFIG_NET_MAX_LISTENPORTS=16
|
||||
CONFIG_NET_TCP_READAHEAD=y
|
||||
CONFIG_NET_TCP_READAHEAD_BUFSIZE=536
|
||||
CONFIG_NET_NTCP_READAHEAD_BUFFERS=8
|
||||
# CONFIG_NET_TCP_WRITE_BUFFERS is not set
|
||||
CONFIG_NET_TCP_RECVDELAY=0
|
||||
CONFIG_NET_TCPBACKLOG=y
|
||||
# CONFIG_NET_TCP_SPLIT is not set
|
||||
# CONFIG_NET_SENDFILE is not set
|
||||
|
||||
#
|
||||
# UDP Networking
|
||||
#
|
||||
CONFIG_NET_UDP=y
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
CONFIG_NET_UDP_CONNS=8
|
||||
CONFIG_NET_BROADCAST=y
|
||||
# CONFIG_NET_RXAVAIL is not set
|
||||
CONFIG_NET_ICMP=y
|
||||
CONFIG_NET_ICMP_PING=y
|
||||
# CONFIG_NET_PINGADDRCONF is not set
|
||||
# CONFIG_NET_IGMP is not set
|
||||
# CONFIG_NET_STATISTICS is not set
|
||||
CONFIG_NET_RECEIVE_WINDOW=536
|
||||
CONFIG_NET_ARPTAB_SIZE=16
|
||||
# CONFIG_NET_ARP_IPIN is not set
|
||||
# CONFIG_NET_ROUTE is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
@ -485,6 +588,7 @@ CONFIG_FS_FAT=y
|
||||
# CONFIG_FAT_LFN is not set
|
||||
# CONFIG_FS_FATTIME is not set
|
||||
# CONFIG_FAT_DMAMEMORY is not set
|
||||
# CONFIG_NFS is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
@ -598,6 +702,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NETTEST is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
@ -627,6 +732,7 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_DISCOVER is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
@ -651,15 +757,24 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
CONFIG_NETUTILS_RESOLV=y
|
||||
CONFIG_NET_RESOLV_ENTRIES=8
|
||||
CONFIG_NET_RESOLV_MAXRESPONSE=96
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
CONFIG_NETUTILS_TELNETD=y
|
||||
CONFIG_NETUTILS_TFTPC=y
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
CONFIG_NETUTILS_UIPLIB=y
|
||||
CONFIG_NETUTILS_WEBCLIENT=y
|
||||
CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
|
||||
# CONFIG_NETUTILS_WEBSERVER is not set
|
||||
# CONFIG_NETUTILS_DISCOVER is not set
|
||||
# CONFIG_NETUTILS_XMLRPC is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
@ -705,6 +820,7 @@ CONFIG_NSH_BUILTIN_APPS=y
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PING is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
@ -744,6 +860,20 @@ CONFIG_NSH_CONSOLE=y
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_TELNET=y
|
||||
CONFIG_NSH_TELNETD_PORT=23
|
||||
CONFIG_NSH_TELNETD_DAEMONPRIO=100
|
||||
CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
|
||||
CONFIG_NSH_TELNETD_CLIENTPRIO=100
|
||||
CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
# CONFIG_NSH_TELNET_LOGIN is not set
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
# CONFIG_NSH_DNS is not set
|
||||
CONFIG_NSH_NOMAC=y
|
||||
CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
|
||||
@ -193,6 +193,12 @@
|
||||
|
||||
#define SAM_TCS_IRQ SAM_IRQ_PA16
|
||||
|
||||
/* Ethernet MAC. The PHY interrupt is available on pin PD28 */
|
||||
|
||||
#define GPIO_PHY_IRQ (GPIO_INPUT | GPIO_CFG_PULLUP | GPIO_INT_BOTHEDGES | \
|
||||
GPIO_PORT_PIOD | GPIO_PIN28)
|
||||
#define SAM_PHY_IRQ SAM_IRQ_PD28
|
||||
|
||||
/* LEDs
|
||||
*
|
||||
* D2 PA0 Blue Pulled high
|
||||
|
||||
Loading…
Reference in New Issue
Block a user