sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add a generic user LED upper half discrete driver

Browse Source
This commit is contained in:
Gregory Nutt 2015-11-01 14:41:40 -06:00
parent cbb78071b3
commit 0dea00177e
8 changed files with 862 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Kconfig
View File

@ -548,6 +548,16 @@ config DEBUG_INPUT
this debug option is board-specific and may not be available for
some boards.
config DEBUG_DISCRETE
bool "Discrete I/O Debug Output"
default n
depends on DISCRETE_IO
---help---
Enable low level debug SYSLOG output from the discrete I/O device
drivers such as LEDs and I/O expanders (disabled by default).
Support for this debug option is board-specific and may not be
available for some boards.
config DEBUG_ANALOG
bool "Analog Device Debug Output"
default n

36
drivers/discrete/Kconfig
View File

@ -42,3 +42,39 @@ config PCA9555_INT_DISABLE
endif # IOEXPANDER_PCA9555
endif # IOEXPANDER
config USERLED
bool "LED driver"
default n
depends on ARCH_HAVE_LEDS
---help---
Enable standard user LED upper half driver.
if USERLED
config USERLED_LOWER
bool "Generic Lower Half LED Driver"
default n
---help---
If the board supports the standard LED interfaces as
defined in include/nuttx/board.h header file, then this
standard LED lower half driver might be usable.
In order for this generic driver to be usable:
1. The board implementation must provide the LED
interfaces as defined in include/nuttx/board.h
2. The board.h header file must provide the definition
NUM_USERLED, and
3. The board.h header file must not include any other
header files that are not accessibble in this context
(such as those in arch/<arch>/src/<chip>) UNLESS those
inclusions are conditioned on __KERNEL__. button_lower.c
will undefine __KERNEL__ before included board.h.
If your board does not meet these requirements, then the
userled_lower.c file can still be copied to your your
board src/ directory and modified for your specific board
requirements.
endif # USERLED

20
drivers/discrete/Make.defs
View File

@ -33,17 +33,31 @@
#
############################################################################
# Don't build anything if there is no support for io expander devices
# Don't build anything if there is no support for discrete devices
ifeq ($(CONFIG_DISCRETE_IO),y)
# Include user LED driver
ifeq ($(CONFIG_USERLED),y)
CSRCS += userled_upper.c
ifeq ($(CONFIG_USERLED_LOWER),y)
CSRCS += userled_lower.c
endif
endif
# Check if I/O expander support is enabled
ifeq ($(CONFIG_IOEXPANDER),y)
# Include the selected io expander drivers
# Include the selected I/O expander drivers
ifeq ($(CONFIG_IOEXPANDER_PCA9555),y)
CSRCS += pca9555.c
endif
endif
# Include io expander device driver build support
# Include discrete I/O device driver build support
DEPPATH += --dep-path discrete
VPATH += :discrete

599
drivers/discrete/userled_upper.c Normal file
View File

@ -0,0 +1,599 @@
/****************************************************************************
* drivers/button_upper.c
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* This file provides a driver for a LED input devices.
*
* The LEDs driver exports a standard character driver interface. By
* convention, the LED driver is registered as an input device at
* /dev/btnN where N uniquely identifies the driver instance.
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/fs/fs.h>
#include <nuttx/discrete/userled.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_VERBOSE
# undef CONFIG_DEBUG_DISCRETE
#endif
#ifdef CONFIG_DEBUG_DISCRETE
# define ddbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define dvdbg lldbg
# else
# define dvdbg(x...)
# endif
#else
# define ddbg(x...)
# define dvdbg(x...)
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure provides the state of one LED driver */
struct userled_upperhalf_s
{
/* Saved binding to the lower half LED driver */
FAR const struct userled_lowerhalf_s *lu_lower;
userled_set_t lu_supported; /* The set of supported LEDs */
userled_set_t lu_ledset; /* Current state of LEDs */
sem_t lu_exclsem; /* Supports exclusive access to the device */
/* The following is a singly linked list of open references to the
* LED device.
*/
FAR struct userled_open_s *lu_open;
};
/* This structure describes the state of one open LED driver instance */
struct userled_open_s
{
/* Supports a singly linked list */
FAR struct userled_open_s *bo_flink;
/* The following will be true if we are closing */
volatile bool bo_closing;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Semaphore helpers */
static inline int userled_takesem(sem_t *sem);
#define userled_givesem(s) sem_post(s);
/* Character driver methods */
static int userled_open(FAR struct file *filep);
static int userled_close(FAR struct file *filep);
static ssize_t userled_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int userled_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations userled_fops =
{
userled_open, /* open */
userled_close, /* close */
0, /* read */
userled_write, /* write */
0, /* seek */
userled_ioctl /* ioctl */
#ifndef CONFIG_DISABLE_POLL
, 0 /* poll */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: userled_takesem
****************************************************************************/
static inline int userled_takesem(sem_t *sem)
{
/* Take a count from the semaphore, possibly waiting */
if (sem_wait(sem) < 0)
{
/* EINTR is the only error that we expect */
int errcode = get_errno();
DEBUGASSERT(errcode == EINTR);
return -errcode;
}
return OK;
}
/****************************************************************************
* Name: userled_open
****************************************************************************/
static int userled_open(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct userled_upperhalf_s *priv;
FAR struct userled_open_s *opriv;
int ret;
DEBUGASSERT(filep && filep->f_inode);
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
priv = (FAR struct userled_upperhalf_s *)inode->i_private;
/* Get exclusive access to the driver structure */
ret = userled_takesem(&priv->lu_exclsem);
if (ret < 0)
{
dvdbg("ERROR: userled_takesem failed: %d\n", ret);
return ret;
}
/* Allocate a new open structure */
opriv = (FAR struct userled_open_s *)kmm_zalloc(sizeof(struct userled_open_s));
if (!opriv)
{
dvdbg("ERROR: Failled to allocate open structure\n");
ret = -ENOMEM;
goto errout_with_sem;
}
/* Attach the open structure to the device */
opriv->bo_flink = priv->lu_open;
priv->lu_open = opriv;
/* Attach the open structure to the file structure */
filep->f_priv = (FAR void *)opriv;
ret = OK;
errout_with_sem:
userled_givesem(&priv->lu_exclsem);
return ret;
}
/****************************************************************************
* Name: userled_close
****************************************************************************/
static int userled_close(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct userled_upperhalf_s *priv;
FAR struct userled_open_s *opriv;
FAR struct userled_open_s *curr;
FAR struct userled_open_s *prev;
irqstate_t flags;
bool closing;
int ret;
DEBUGASSERT(filep && filep->f_priv && filep->f_inode);
opriv = filep->f_priv;
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
priv = (FAR struct userled_upperhalf_s *)inode->i_private;
/* Handle an improbable race conditions with the following atomic test
* and set.
*
* This is actually a pretty feeble attempt to handle this. The
* improbable race condition occurs if two different threads try to
* close the LED driver at the same time. The rule: don't do
* that! It is feeble because we do not really enforce stale pointer
* detection anyway.
*/
flags = irqsave();
closing = opriv->bo_closing;
opriv->bo_closing = true;
irqrestore(flags);
if (closing)
{
/* Another thread is doing the close */
return OK;
}
/* Get exclusive access to the driver structure */
ret = userled_takesem(&priv->lu_exclsem);
if (ret < 0)
{
dvdbg("ERROR: userled_takesem failed: %d\n", ret);
return ret;
}
/* Find the open structure in the list of open structures for the device */
for (prev = NULL, curr = priv->lu_open;
curr && curr != opriv;
prev = curr, curr = curr->bo_flink);
DEBUGASSERT(curr);
if (!curr)
{
dvdbg("ERROR: Failed to find open entry\n");
ret = -ENOENT;
goto errout_with_exclsem;
}
/* Remove the structure from the device */
if (prev)
{
prev->bo_flink = opriv->bo_flink;
}
else
{
priv->lu_open = opriv->bo_flink;
}
/* And free the open structure */
kmm_free(opriv);
ret = OK;
errout_with_exclsem:
userled_givesem(&priv->lu_exclsem);
return ret;
}
/****************************************************************************
* Name: userled_write
****************************************************************************/
static ssize_t userled_write(FAR struct file *filep, FAR const char *buffer,
size_t len)
{
FAR struct inode *inode;
FAR struct userled_upperhalf_s *priv;
FAR const struct userled_lowerhalf_s *lower;
userled_set_t ledset;
int ret;
DEBUGASSERT(filep && filep->f_inode);
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
priv = (FAR struct userled_upperhalf_s *)inode->i_private;
/* Make sure that the buffer is sufficiently large to hold at least one
* complete sample.
*
* REVISIT: Should also check buffer alignment.
*/
if (len < sizeof(userled_set_t))
{
dvdbg("ERROR: buffer too small: %lu\n", (unsigned long)len);
return -EINVAL;
}
/* Get the LED set to write.
* REVISIT: if sizeof(userled_set_t) > 1, then we will have to address
* some buffer alignment issues.
*/
DEBUGASSERT(buffer != NULL);
ledset = *(userled_set_t *)buffer;
/* Get exclusive access to the driver structure */
ret = userled_takesem(&priv->lu_exclsem);
if (ret < 0)
{
dvdbg("ERROR: userled_takesem failed: %d\n", ret);
return ret;
}
/* Read and return the current state of the LEDs */
lower = priv->lu_lower;
DEBUGASSERT(lower && lower->ll_ledset);
lower->ll_ledset(lower, ledset);
userled_givesem(&priv->lu_exclsem);
return (ssize_t)sizeof(userled_set_t);
}
/****************************************************************************
* Name: userled_ioctl
****************************************************************************/
static int userled_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode;
FAR struct userled_upperhalf_s *priv;
FAR const struct userled_lowerhalf_s *lower;
int ret;
DEBUGASSERT(filep != NULL && filep->f_priv != NULL && filep->f_inode != NULL);
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
priv = (FAR struct userled_upperhalf_s *)inode->i_private;
/* Get exclusive access to the driver structure */
ret = userled_takesem(&priv->lu_exclsem);
if (ret < 0)
{
dvdbg("ERROR: userled_takesem failed: %d\n", ret);
return ret;
}
/* Handle the ioctl command */
ret = -EINVAL;
switch (cmd)
{
/* Command: ULEDIOC_SUPPORTED
* Description: Report the set of LEDs supported by the hardware;
* Argument: A pointer to writeable userled_set_t value in which to
* return the set of supported LEDs.
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
case ULEDIOC_SUPPORTED:
{
FAR userled_set_t *supported = (FAR userled_set_t *)((uintptr_t)arg);
/* Verify that a non-NULL pointer was provided */
if (supported)
{
*supported = priv->lu_supported;
ret = OK;
}
}
break;
/* Command: ULEDIOC_SETLED
* Description: Set the state of one LED.
* Argument: A read-only pointer to an instance of struct userled_s
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
case ULEDIOC_SETLED:
{
FAR struct userled_s *userled = (FAR struct userled_s *)((uintptr_t)arg);
int led;
bool ledon;
/* Verify that a non-NULL pointer was provided */
if (userled)
{
led = userled->ul_led;
ledon = userled->ul_on;
/* Check that a valid LED is being set */
if (led < 8 * sizeof(userled_set_t) &&
(priv->lu_supported & (1 << led)) != 0)
{
/* Update the LED state */
if (ledon)
{
priv->lu_ledset |= (1 << led);
}
else
{
priv->lu_ledset &= ~(1 << led);
}
/* Set the LED state */
lower = priv->lu_lower;
DEBUGASSERT(lower != NULL && lower->ll_led != NULL);
lower->ll_led(lower, led, ledon);
ret = OK;
}
}
}
break;
/* Command: ULEDIOC_SETALL
* Description: Set the state of all LEDs.
* Argument: A value of type userled_set_t cast to unsigned long
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
case ULEDIOC_SETALL:
{
userled_set_t ledset = (userled_set_t)((uintptr_t)arg);
/* Verify that a valid LED set was provided */
if ((ledset & priv->lu_supported) == ledset)
{
/* Update the LED state */
priv->lu_ledset = ledset;
/* Set the new LED state */
lower = priv->lu_lower;
DEBUGASSERT(lower != NULL && lower->ll_led != NULL);
lower->ll_ledset(lower, ledset);
ret = OK;
}
}
break;
/* Command: ULEDIOC_GETALL
* Description: Get the state of one LED.
* Argument: A write-able pointer to a userled_set_t memory location in
* which to return the LED state.
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
case ULEDIOC_GETALL:
{
FAR userled_set_t *ledset = (FAR userled_set_t *)((uintptr_t)arg);
/* Verify that a non-NULL pointer was provided */
if (ledset)
{
*ledset = priv->lu_ledset;
ret = OK;
}
}
break;
default:
dvdbg("ERROR: Unrecognized command: %ld\n", cmd);
ret = -ENOTTY;
break;
}
userled_givesem(&priv->lu_exclsem);
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: userled_register
*
* Description:
* Bind the lower half LED driver to an instance of the upper half
* LED driver and register the composite character driver as the
* specified device.
*
* Input Parameters:
* devname - The name of the LED device to be registered.
* This should be a string of the form "/dev/ledN" where N is the the
* minor device number.
* lower - An instance of the platform-specific LED lower half driver.
*
* Returned Values:
* Zero (OK) is returned on success. Otherwise a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int userled_register(FAR const char *devname,
FAR const struct userled_lowerhalf_s *lower)
{
FAR struct userled_upperhalf_s *priv;
int ret;
DEBUGASSERT(devname && lower);
/* Allocate a new LED driver instance */
priv = (FAR struct userled_upperhalf_s *)
kmm_zalloc(sizeof(struct userled_upperhalf_s));
if (!priv)
{
dvdbg("ERROR: Failed to allocate device structure\n");
return -ENOMEM;
}
/* Initialize the new LED driver instance */
priv->lu_lower = lower;
sem_init(&priv->lu_exclsem, 0, 1);
DEBUGASSERT(lower && lower->ll_supported);
priv->lu_supported = lower->ll_supported(lower);
DEBUGASSERT(lower && lower->ll_ledset);
priv->lu_ledset = 0;
lower->ll_ledset(lower, priv->lu_ledset);
/* And register the LED driver */
ret = register_driver(devname, &userled_fops, 0666, priv);
if (ret < 0)
{
dvdbg("ERROR: register_driver failed: %d\n", ret);
goto errout_with_priv;
}
return OK;
errout_with_priv:
sem_destroy(&priv->lu_exclsem);
kmm_free(priv);
return ret;
}

2
drivers/input/Kconfig
View File

@ -354,7 +354,7 @@ config BUTTONS_LOWER
will undefine __KERNEL__ before included board.h.
If your board does not meet these requirements, then the
board_lower.c file can still be copied to your your
button_lower.c file can still be copied to your your
board src/ directory and modified for your specific board
requirements.

1
include/nuttx/board.h
View File

@ -101,6 +101,7 @@
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/compiler.h>

185
include/nuttx/discrete/userled.h Normal file
View File

@ -0,0 +1,185 @@
/************************************************************************************
* include/nuttx/input/userled.h
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __INCLUDE_NUTTX_DISCRETE_USERLED_H
#define __INCLUDE_NUTTX_DISCRETE_USERLED_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/fs/ioctl.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* ioctl commands */
/* Command: ULEDIOC_SUPPORTED
* Description: Report the set of LEDs supported by the hardware;
* Argument: A pointer to writeable userled_set_t value in which to
* return the set of supported LEDs.
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
#define ULEDIOC_SUPPORTED _ULEDIOC(0x0001)
/* Command: ULEDIOC_SETLED
* Description: Set the state of one LED.
* Argument: A read-only pointer to an instance of struct userled_s
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
#define ULEDIOC_SETLED _ULEDIOC(0x0002)
/* Command: ULEDIOC_SETALL
* Description: Set the state of all LEDs.
* Argument: A value of type userled_set_t cast to unsigned long
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
#define ULEDIOC_SETALL _ULEDIOC(0x0003)
/* Command: ULEDIOC_GETALL
* Description: Get the state of one LED.
* Argument: A write-able pointer to a userled_set_t memory location in
* which to return the LED state.
* Return: Zero (OK) on success. Minus one will be returned on failure
* with the errno value set appropriately.
*/
#define ULEDIOC_GETALL _ULEDIOC(0x0004)
/****************************************************************************
* Public Types
****************************************************************************/
/* This type is a bit set that contains the state of all LEDs as defined
* in arch/board/board.h. This is the value that is returned when reading
* from or writing to the LED driver.
*/
typedef uint8_t userled_set_t;
/* A reference to this structure is provided with the ULEDIOC_SETLED IOCTL
* command and describes the LED to be set and the new value of the LED.
* The encoding of LEDs is provided in the board-specific board.h header
* file.
*/
struct userled_s
{
uint8_t ul_led; /* Identifies the LED */
bool ul_on; /* The LED state. true: ON; false: OFF */
};
/* The user LED driver is a two-part driver:
*
* 1) A common upper half driver that provides the common user interface to
* the LEDs,
* 2) Platform-specific lower half drivers that provide the interface
* between the common upper half and the platform discrete LED outputs.
*
* This structure defines the interface between an instance of the lower
* half driver and the common upper half driver. Such an instance is
* passed to the upper half driver when the driver is initialized, binding
* the upper and lower halves into one driver.
*/
struct userled_lowerhalf_s
{
/* Return the set of LEDs supported by the board */
CODE userled_set_t (*ll_supported)(FAR const struct userled_lowerhalf_s *lower);
/* Set the current state of one LED */
CODE void (*ll_led)(FAR const struct userled_lowerhalf_s *lower,
int led, bool ledon);
/* Set the state of all LEDs */
CODE void (*ll_ledset)(FAR const struct userled_lowerhalf_s *lower,
userled_set_t ledset);
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: userled_register
*
* Description:
* Bind the lower half LED driver to an instance of the upper half
* LED driver and register the composite character driver as the
* specified device.
*
* Input Parameters:
* devname - The name of the LED device to be registered.
* This should be a string of the form "/dev/ledN" where N is the the
* minor device number.
* lower - An instance of the platform-specific LED lower half driver.
*
* Returned Values:
* Zero (OK) is returned on success. Otherwise a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int userled_register(FAR const char *devname,
FAR const struct userled_lowerhalf_s *lower);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __INCLUDE_NUTTX_DISCRETE_USERLED_H */

16
include/nuttx/fs/ioctl.h
View File

@ -78,8 +78,12 @@
#define _RELAYBASE (0x1900) /* Relay devices ioctl commands */
#define _CANBASE (0x1a00) /* CAN ioctl commands */
#define _BTNBASE (0x1b00) /* Button ioctl commands */
#define _ZCBASE (0x1c00) /* Zero Cross ioctl commands */
#define _BOARDBASE (0x1d00) /* boardctl ioctl commands */
#define _ULEDBASE (0x1c00) /* User LED ioctl commands */
#define _ZCBASE (0x1d00) /* Zero Cross ioctl commands */
/* boardctl commands share the same number space */
#define _BOARDBASE (0xff00) /* boardctl commands */
/* Macros used to manage ioctl commands */
@ -339,11 +343,17 @@
#define _CANIOC(nr) _IOC(_CANBASE,nr)
/* Button driver ioctl definitions ******************************************/
/* (see nuttx/can.h */
/* (see nuttx/input/buttons.h */
#define _BTNIOCVALID(c) (_IOC_TYPE(c)==_BTNBASE)
#define _BTNIOC(nr) _IOC(_BTNBASE,nr)
/* User LED driver ioctl definitions ****************************************/
/* (see nuttx/discrete/userled.h */
#define _ULEDIOCVALID(c) (_IOC_TYPE(c)==_ULEDBASE)
#define _ULEDIOC(nr) _IOC(_ULEDBASE,nr)
/* Zero Cross driver ioctl definitions **************************************/
/* (see nuttx/include/sensor/zerocross.h */