From 0e52cdc2c4b98195a199fb1d31f8a4cefad92589 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 25 Feb 2012 20:46:18 +0000 Subject: [PATCH] readline() (and hence NSH) now accept the DEL character as well as the Backspace character for the backspace functionality git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4428 42af7a65-404d-4744-a932-0658087f49c3 --- configs/stm3240g-eval/README.txt | 22 +++++++++++++++++++++- configs/stm32f4discovery/README.txt | 21 +++++++++++++++++++++ 2 files changed, 42 insertions(+), 1 deletion(-) diff --git a/configs/stm3240g-eval/README.txt b/configs/stm3240g-eval/README.txt index 34c6a09f3f..7ecbd71b5a 100755 --- a/configs/stm3240g-eval/README.txt +++ b/configs/stm3240g-eval/README.txt @@ -909,8 +909,28 @@ Where is one of the following: examples/ostest. By default, this project assumes that you are using the DFU bootloader. - CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + If you use the Atollic toolchain, then the FPU test can be enabled in the + examples/ostest by adding the following your NuttX configuration file: + + -CONFIG_ARCH_FPU=n : Enabled the FPU + +CONFIG_ARCH_FPU=y + + -CONFIG_STM32_CODESOURCERYW=y : Disable CodeSourcery under Windows + +CONFIG_STM32_CODESOURCERYL=n + + -CONFIG_STM32_ATOLLIC=y : Enable the Atollic toolchain + +CONFIG_STM32_ATOLLIC=n + + -CONFIG_SCHED_WAITPID=y : Enable the waitpid() API needed by the FPU test + +CONFIG_SCHED_WAITPID=n + + The FPU test also needs to know the size of the FPU registers save area in + bytes (see arch/arm/include/armv7-m/irq_lazyfpu.h): + + -CONFIG_EXAMPLES_OSTEST_FPUSIZE=(4*33) + telnetd: -------- diff --git a/configs/stm32f4discovery/README.txt b/configs/stm32f4discovery/README.txt index 70075220a0..1048e54ace 100755 --- a/configs/stm32f4discovery/README.txt +++ b/configs/stm32f4discovery/README.txt @@ -711,6 +711,27 @@ Where is one of the following: CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + + If you use the Atollic toolchain, then the FPU test can be enabled in the + examples/ostest by adding the following your NuttX configuration file: + + -CONFIG_ARCH_FPU=n : Enabled the FPU + +CONFIG_ARCH_FPU=y + + -CONFIG_STM32_CODESOURCERYW=y : Disable CodeSourcery under Windows + +CONFIG_STM32_CODESOURCERYL=n + + -CONFIG_STM32_ATOLLIC=y : Enable the Atollic toolchain + +CONFIG_STM32_ATOLLIC=n + + -CONFIG_SCHED_WAITPID=y : Enable the waitpid() API needed by the FPU test + +CONFIG_SCHED_WAITPID=n + + The FPU test also needs to know the size of the FPU registers save area in + bytes (see arch/arm/include/armv7-m/irq_lazyfpu.h): + + -CONFIG_EXAMPLES_OSTEST_FPUSIZE=(4*33) + nsh: --- Configures the NuttShell (nsh) located at apps/examples/nsh. The