configs/pnev5180b/src/lpc17_bringup.c: Forgot to add a new file before last commit.

configs/pnev5180b/src/lpc17_bringup.c

@@ -0,0 +1,172 @@
+/*****************************************************************************
+ * config/pnev5180b/src/lpc17_bringup.c
+ *
+ *   Copyright (C) 2019 Gregory Nutt. All rights reserved.
+ *   Author: Michael Jung <mijung@gmx.net>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+/*****************************************************************************
+ * Included Files
+ *****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <syslog.h>
+#include <errno.h>
+
+#include <nuttx/board.h>
+#include <nuttx/spi/spi.h>
+#include <nuttx/binfmt/elf.h>
+#include <nuttx/binfmt/nxflat.h>
+#include <nuttx/binfmt/symtab.h>
+
+#ifdef CONFIG_CDCACM
+#  include <nuttx/usb/cdcacm.h>
+#endif
+
+#ifdef CONFIG_NET_CDCECM
+#  include <nuttx/usb/cdcecm.h>
+#  include <net/if.h>
+#endif
+
+#ifdef CONFIG_USBMONITOR
+#  include <nuttx/usb/usbmonitor.h>
+#endif
+
+#ifdef CONFIG_CDCECM_COMPOSITE
+#  include <nuttx/board.h>
+#endif
+
+#include "lpc17_spi.h"
+#include "pnev5180b.h"
+#include "lpc17_symtab.h"
+#include "lpc17_progmem.h"
+
+/*****************************************************************************
+ * Pre-processor Definitions
+ *****************************************************************************/
+
+/* Configuration *************************************************************/
+
+/* PORT and SLOT number probably depend on the board configuration */
+
+#ifdef CONFIG_ARCH_BOARD_PNEV5180B
+#  define CONFIG_NSH_HAVEUSBDEV 1
+#else
+#  error "Unrecognized board"
+#  undef CONFIG_NSH_HAVEUSBDEV
+#endif
+
+/* Can't support USB device features if USB device is not enabled */
+
+#ifndef CONFIG_USBDEV
+#  undef CONFIG_NSH_HAVEUSBDEV
+#endif
+
+/*****************************************************************************
+ * Public Functions
+ *****************************************************************************/
+
+/****************************************************************************
+ * Name: pnev5180b_bringup
+ *
+ * Description:
+ *   Perform architecture-specific initialization
+ *
+ *   CONFIG_BOARD_LATE_INITIALIZE=y :
+ *     Called from board_late_initialize().
+ *
+ *   CONFIG_BOARD_LATE_INITIALIZE=n && CONFIG_LIB_BOARDCTL=y :
+ *     Called from the NSH library
+ *
+ ****************************************************************************/
+
+int pnev5180b_bringup(void)
+{
+  int ret = OK;
+
+#ifdef CONFIG_CDCACM
+  ret = cdcacm_initialize(0, NULL);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: cdcacm_initialize() failed: %d\n", ret);
+      goto done;
+    }
+#endif
+
+#ifdef CONFIG_USBMONITOR
+  ret = usbmonitor_start();
+  if (ret != OK)
+    {
+      syslog(LOG_ERR, "ERROR: usbmonitor_start() failed: %d\n", ret);
+      goto done;
+    }
+#endif
+
+#if defined(CONFIG_NET_CDCECM) && !defined(CONFIG_CDCECM_COMPOSITE)
+  ret = cdcecm_initialize(0, NULL);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: cdcecm_initialize() failed: %d\n", ret);
+      goto done;
+    }
+#endif
+
+#if defined(CONFIG_CDCECM_COMPOSITE)
+  board_composite_connect(0, 0);
+#endif
+
+#ifdef CONFIG_ELF
+  ret = elf_initialize();
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: elf_initialize() failed: %d\n", ret);
+      goto done;
+    }
+#endif
+
+#ifdef CONFIG_NXFLAT
+  ret = nxflat_initialize();
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: nxflat_initialize() failed: %d\n", ret);
+      goto done;
+    }
+#endif
+
+#if defined(CONFIG_ELF) || defined(CONFIG_NXFLAT)
+  exec_setsymtab(lpc17_exports, lpc17_nexports);
+#endif
+
+done:
+  return ret;
+}