Move board_ prototypes from arch.h to board.h

configs/avr32dev1/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam3u-ek/src/up_leds.c
  *
- *   Copyright (C) 2010-2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010-2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -44,6 +44,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -55,7 +56,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/cloudctrl/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/cloudctrl/src/board_buttons.c
  *
- *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *           Darcy Gong <darcy.gong@gmail.com>
  *
@@ -43,6 +43,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "cloudctrl-internal.h"
@@ -50,7 +51,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/demo9s12ne64/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/demo9s12ne64/src/up_leds.c
  *
- *   Copyright (C) 2009, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "demo9s12ne64.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/dk-tm4c129x/src/tm4c_boot.c

@@ -41,6 +41,7 @@
 
 #include <debug.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "up_arch.h"

configs/dk-tm4c129x/src/tm4c_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/dk-tm4c/src/tm4c_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 
 #include <arch/irq.h>
 #include <arch/board/board.h>
@@ -51,7 +52,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/ea3131/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ea3131/src/up_leds.c
  *
- *   Copyright (C) 2009-2010, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "ea3131_internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/ea3152/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ea3152/src/up_leds.c
  *
- *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "ea3152_internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/efm32-g8xx-stk/src/efm32_boot.c

@@ -39,6 +39,8 @@
 
 #include <nuttx/config.h>
 
+#include <nuttx/board.h>
+
 #include "efm32_gpio.h"
 #include "efm32_start.h"
 #include "efm32-g8xx-stk.h"

configs/ez80f910200zco/src/ez80_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ez80f910200zco/src/ez80_leds.c
  *
- *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2008-2009, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,13 +42,14 @@
 #include <stdint.h>
 
 #include <nuttx/irq.h>
+#include <nuttx/board.h>
 
 #include "chip.h"
 #include "up_arch.h"
 #include "up_internal.h"
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/fire-stm32v2/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/fire-stm32v2/src/board_buttons.c
  *
- *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "fire-internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/freedom-kl25z/src/kl_boardinitialize.c

@@ -42,13 +42,14 @@
 
 #include <debug.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "up_arch.h"
 #include "freedom-kl25z.h"
 
 /************************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ************************************************************************************/
 
 /************************************************************************************

configs/freedom-kl26z/src/kl_boardinitialize.c

@@ -41,6 +41,7 @@
 
 #include <debug.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "up_arch.h"

configs/hymini-stm32v/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/hymini-stm32v/src/board_buttons.c
  *
- *   Copyright (C) 2009, 2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "hymini_stm32v-internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/kwikstik-k40/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/kwikstik-k40/src/board_buttons.c
  *
- *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "kwikstik-internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/lincoln60/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/lincoln60/src/board_buttons.c
  *
- *   Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012-2013, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <stdbool.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/board/board.h>
@@ -53,7 +54,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/lpc4330-xplorer/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/lpc4330-xplorer/src/board_buttons.c
  *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <stdbool.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/board/board.h>
@@ -52,7 +53,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/lpc4357-evb/src/lpc43_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/lpc4357-evb/src/board_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <stdbool.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/board/board.h>

configs/ne64badge/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ne64badge/src/board_buttons.c
  *
- *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "ne64badge_internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /* Enables debug output from this file (needs CONFIG_DEBUG with

configs/nucleo-f4x1re/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/nucleo-f4x1re/src/stm32_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "nucleo-f4x1re.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/olimex-efm32g880f128-stk/src/efm32_boot.c

@@ -1,7 +1,7 @@
 /*****************************************************************************
  * configs/olimex-efm32g880f128-stk/src/efm32_boot.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -39,6 +39,8 @@
 
 #include <nuttx/config.h>
 
+#include <nuttx/board.h>
+
 #include "efm32_start.h"
 
 #include "efm32g880f128-stk.h"

configs/olimex-efm32g880f128-stk/src/efm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/olimex-efm32g880f128-stk/src/efm32_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -55,6 +55,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -66,7 +67,7 @@
 #if CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/olimex-lpc1766stk/src/lpc17_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/olimex-lpc1766stk/src/lpc17_buttons.c
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <stdbool.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/board/board.h>
@@ -53,7 +54,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/olimex-stm32-h405/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/olimex-stm32-h405/src/stm32_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "olimex-stm32-h405.h"

configs/olimex-stm32-p207/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/olimex-stm32-p207/src/board_buttons.c
  *
- *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2012, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "olimex-stm32-p207.h"

configs/olimex-strp711/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/olimex-strp711/src/up_leds.c
  *
- *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2008-2009, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -40,6 +40,7 @@
 #include <nuttx/config.h>
 #include <stdint.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "chip.h"
@@ -47,7 +48,7 @@
 #include "up_internal.h"
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /* The Olimex board has two buttons, one labled "BUT" and the other "WAKEUP"

configs/open1788/src/lpc17_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/open1788/src/lpc17_buttons.c
  *
- *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <stdbool.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/board/board.h>
@@ -53,7 +54,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/pcduino-a10/src/a1x_boot.c

@@ -41,6 +41,8 @@
 
 #include <debug.h>
 
+#include <nuttx/board.h>
+
 #include "pcduino_a10.h"
 
 /************************************************************************************

configs/pcduino-a10/src/a1x_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/pcduino-a10/src/a1x_buttons.c
  *
- *   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -52,7 +53,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/pic32mz-starterkit/src/pic32mz_boot.c

@@ -42,6 +42,7 @@
 #include <debug.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 
 #include "pic32mz-starterkit.h"
 

configs/sam3u-ek/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam3u-ek/src/up_leds.c
  *
- *   Copyright (C) 2010, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2010, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -53,7 +54,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/sam4e-ek/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam4e-ek/src/sam_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -53,7 +54,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/sam4l-xplained/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam4l-xplained/src/sam_buttons.c
  *
- *   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>

configs/sam4s-xplained-pro/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam4s-xplained-pro/src/sam_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Authors: Gregory Nutt <gnutt@nuttx.org>
  *            Bob Doiron
  *
@@ -43,6 +43,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -54,7 +55,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/sam4s-xplained/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sam4s-xplained/src/sam_buttons.c
  *
- *   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -53,7 +54,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/sama5d3-xplained/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sama5d3-xplained/src/sam_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -57,6 +57,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -68,7 +69,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/sama5d3x-ek/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sama5d3x-ek/src/sam_buttons.c
  *
- *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -57,6 +57,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -68,7 +69,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/sama5d4-ek/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sama5d4-ek/src/sam_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -53,6 +53,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>

configs/samd20-xplained/src/sam_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/samd20-xplained/src/sam_buttons.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/irq.h>
 
 #include <arch/irq.h>
@@ -53,7 +54,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/shenzhou/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/shenzhou/src/board_buttons.c
  *
- *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "shenzhou-internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/sim/src/sim_boot.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * config/sim/src/sim_boot.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -39,6 +39,7 @@
 
 #include <nuttx/config.h>
 #include <nuttx/compiler.h>
+#include <nuttx/board.h>
 
 #include "up_internal.h"
 

configs/skp16c26/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/skp16c26/src/board_buttons.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -38,14 +38,17 @@
  ****************************************************************************/
 
 #include <nuttx/config.h>
+
 #include <stdint.h>
 
+#include <nuttx/board.h>
+
 #include "chip.h"
 #include "up_arch.h"
 #include "up_internal.h"
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /* The SKP62C26 has 3 buttons control by bits 1, 2, and 3 in port 8. */

configs/spark/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/spark/src/board_buttons.c
  *
- *   Copyright (C) 2011-2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "spark.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/stm3210e-eval/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm3210e-eval/src/stm32_buttons.c
  *
- *   Copyright (C) 2009, 2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009, 2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm3210e-eval.h"

configs/stm3210e-eval/src/stm32_pmbuttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm3210e-eval/src/stm32_pmbuttons.c
  *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2015 Gregory Nutt. All rights reserved.
  *   Authors: Gregory Nutt <gnutt@nuttx.org>
  *            Diego Sanchez <dsanchez@nx-engineering.com>
  *
@@ -41,8 +41,10 @@
 #include <arch/board/board.h>
 #include <nuttx/config.h>
 
+#include <nuttx/board.h>
 #include <nuttx/power/pm.h>
 #include <arch/irq.h>
+
 #include <stdbool.h>
 #include <debug.h>
 

configs/stm3220g-eval/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm3220g-eval/src/board_buttons.c
  *
- *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm3220g-internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/stm3240g-eval/src/stm32_boot.c

@@ -1,7 +1,7 @@
 /************************************************************************************
  * configs/stm3240g-eval/src/stm32_boot.c
  *
- *   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2013, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,6 +41,8 @@
 
 #include <debug.h>
 
+#include <nuttx/board.h>
+
 #include "stm3240g-eval.h"
 
 /************************************************************************************

configs/stm3240g-eval/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm3240g-eval/src/stm32_buttons.c
  *
- *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm3240g-eval.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/stm32f3discovery/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm32f3discovery/src/board_buttons.c
  *
- *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm32f3discovery-internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/stm32f429i-disco/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm32f429i-disco/src/stm32_buttons.c
  *
- *   Copyright (C) 2011-2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2012, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm32f429i-disco.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/stm32f4discovery/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm32f4discovery/src/stm32_buttons.c
  *
- *   Copyright (C) 2011-2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2012, 2014=2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm32f4discovery.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/stm32f4discovery/src/stm32_pmbuttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm32f4discovery/src/stm32_pm_buttons.c
  *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2015 Gregory Nutt. All rights reserved.
  *   Authors: Gregory Nutt <gnutt@nuttx.org>
  *            Diego Sanchez <dsanchez@nx-engineering.com>
  *
@@ -41,8 +41,10 @@
 #include <arch/board/board.h>
 #include <nuttx/config.h>
 
+#include <nuttx/board.h>
 #include <nuttx/power/pm.h>
 #include <arch/irq.h>
+
 #include <stdbool.h>
 #include <debug.h>
 

configs/stm32ldiscovery/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm32ldiscovery/src/board_buttons.c
  *
- *   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm32ldiscovery.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/stm32vldiscovery/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/stm32vldiscovery/src/stm32_buttons.c
  *
- *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *           Freddie Chopin <freddie_chopin@op.pl>
  *
@@ -43,6 +43,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "stm32vldiscovery.h"

configs/sure-pic32mx/src/pic32mx_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/sure-pic32mx/src/pic32mx_buttons.c
  *
- *   Copyright (C) 2011, 2013-2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2013-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <stdbool.h>
 #include <debug.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "chip.h"
@@ -56,7 +57,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 /* The Sure DB_DP11215 PIC32 Storage Demo Board has three buttons.
  *

configs/tm4c123g-launchpad/src/tm4c_boot.c

@@ -1,7 +1,7 @@
 /************************************************************************************
  * configs/tm4c123g-launchpad/src/tm4c_boot.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,6 +41,7 @@
 
 #include <debug.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "up_arch.h"

configs/tm4c123g-launchpad/src/tm4c_buttons.c

@@ -40,6 +40,7 @@
 #include <nuttx/config.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/irq.h>
 #include <arch/board/board.h>
 

configs/tm4c1294-launchpad/src/tm4c_boot.c

@@ -1,7 +1,7 @@
 /************************************************************************************
  * configs/tm4c1294xl/src/tm4c_boot.c
  *
- *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,6 +41,7 @@
 
 #include <debug.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "tm4c1294-launchpad.h"

configs/tm4c1294-launchpad/src/tm4c_buttons.c

@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 
 #include <arch/irq.h>
 #include <arch/board/board.h>
@@ -51,7 +52,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/twr-k60n512/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/twr-k60n512/src/board_buttons.c
  *
- *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "twrk60-internal.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 /* The TWR-K60N512 has user buttons (plus a reset button):
  *

configs/ubw32/src/up_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/ubw32/src/board_buttons.c
  *
- *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2012, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 #include <stdbool.h>
 #include <debug.h>
 
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "chip.h"
@@ -54,7 +55,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 /* The UBW32 board has three buttons.
  *

configs/viewtool-stm32f107/src/stm32_buttons.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * configs/viewtool-stm32f107/src/stm32_buttons.c
  *
- *   Copyright (C) 2013, 2014 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2013, 2014-2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +42,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "viewtool_stm32f107.h"
@@ -49,7 +50,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

configs/vsn/src/buttons.c

@@ -43,6 +43,7 @@
 #include <stdint.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/board/board.h>
 
 #include "vsn.h"

configs/zkit-arm-1769/src/up_buttons.c

@@ -44,10 +44,13 @@
  ****************************************************************************/
 
 #include <nuttx/config.h>
+
 #include <errno.h>
 #include <debug.h>
+
 #include <nuttx/irq.h>
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <arch/irq.h>
 #include <arch/board/board.h>
 
@@ -59,7 +62,7 @@
 #ifdef CONFIG_ARCH_BUTTONS
 
 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
  ****************************************************************************/
 
 /****************************************************************************

include/nuttx/arch.h

@@ -50,6 +50,8 @@
  *    definitions provide the common interface between NuttX and the
  *    architecture-specific implementation in arch/
  *
+ *    This chip related declarations are retained in this header file.
+ *
  *    NOTE: up_ is supposed to stand for microprocessor; the u is like the
  *    Greek letter micron: µ. So it would be µP which is a common shortening
  *    of the word microprocessor.
@@ -74,6 +76,8 @@
  *    board_ definitions provide the interface between the board-level
  *    logic and the architecture-specific logic.
  *
+ *    Board related declarations are retained the file include/nuttx/board.h.
+ *
  *    There is also a configs/<board>/include/board.h header file that
  *    can be used to communicate other board-specific information between
  *    the architecture logic and even application logic.  Any definitions
@@ -184,23 +188,6 @@ EXTERN volatile bool g_rtc_enabled;
 
 void up_initialize(void);
 
-/****************************************************************************
- * Name: board_initialize
- *
- * Description:
- *   If CONFIG_BOARD_INITIALIZE is selected, then an additional
- *   initialization call will be performed in the boot-up sequence to a
- *   function called board_initialize().  board_initialize() will be
- *   called immediately after up_initialize() is called and just before the
- *   initial application is started.  This additional initialization phase
- *   may be used, for example, to initialize board-specific device drivers.
- *
- ****************************************************************************/
-
-#ifdef CONFIG_BOARD_INITIALIZE
-void board_initialize(void);
-#endif
-
 /****************************************************************************
  * Name: up_idle
  *
@@ -1777,67 +1764,6 @@ size_t  up_check_intstack_remain(void);
  * Board-specific button interfaces exported by the board-specific logic
  ****************************************************************************/
 
-/****************************************************************************
- * Name: board_button_initialize
- *
- * Description:
- *   board_button_initialize() must be called to initialize button resources.
- *   After that, board_buttons() may be called to collect the current state of
- *   all buttons or board_button_irq() may be called to register button interrupt
- *   handlers.
- *
- *   NOTE: This interface may or may not be supported by board-specific
- *   logic.  If the board supports button interfaces, then CONFIG_ARCH_BUTTONS
- *   will be defined.
- *
- ****************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-void board_button_initialize(void);
-#endif
-
-/****************************************************************************
- * Name: board_buttons
- *
- * Description:
- *   After board_button_initialize() has been called, board_buttons() may be
- *   called to collect the state of all buttons.  board_buttons() returns an
- *   8-bit bit set with each bit associated with a button.  A bit set to
- *   "1" means that the button is depressed; a bit set to "0" means that
- *   the button is released.  The correspondence of the each button bit
- *   and physical buttons is board-specific.
- *
- *   NOTE: This interface may or may not be supported by board-specific
- *   logic.  If the board supports button interfaces, then
- *   CONFIG_ARCH_BUTTONS will be defined
- *
- ****************************************************************************/
-
-#ifdef CONFIG_ARCH_BUTTONS
-uint8_t board_buttons(void);
-#endif
-
-/****************************************************************************
- * Name: board_button_irq
- *
- * Description:
- *   This function may be called to register an interrupt handler that will
- *   be called when a button is depressed or released.  The ID value is a
- *   button enumeration value that uniquely identifies a button resource.
- *   The previous interrupt handler address is returned (so that it may
- *   restored, if so desired).
- *
- *   NOTE: This interface may or may not be supported by board-specific
- *   logic.  If the board supports any button interfaces, then
- *   CONFIG_ARCH_BUTTONS will be defined; If the board supports interrupt
- *   buttons, then CONFIG_ARCH_IRQBUTTONS will also be defined.
- *
- ****************************************************************************/
-
-#ifdef CONFIG_ARCH_IRQBUTTONS
-xcpt_t board_button_irq(int id, xcpt_t irqhandler);
-#endif
-
 /****************************************************************************
  * Name: up_rtcinitialize
  *

include/nuttx/board.h

@@ -32,6 +32,64 @@
  * POSSIBILITY OF SUCH DAMAGE.
  *
  ****************************************************************************/
+/* This header file contains function prototypes for the interfaces between
+ * (1) the nuttx core-code, (2) the microprocessor specific logic that
+ * resides under the arch/ sub-directory, and (3) the board-specific logic
+ * that resides under configs/
+ *
+ * Naming conventions:
+ *
+ * 1. Common Microprocessor Interfaces.
+ *
+ *    Any interface that is common across all microprocessors should be
+ *    prefixed with up_ and prototyped in this header file. These
+ *    definitions provide the common interface between NuttX and the
+ *    architecture-specific implementation in arch/
+ *
+ *    These definitions are retained in the the header file nuttx/include/arch.h
+ *
+ *    NOTE: up_ is supposed to stand for microprocessor; the u is like the
+ *    Greek letter micron: µ. So it would be µP which is a common shortening
+ *    of the word microprocessor.
+ *
+ * 2. Microprocessor-Specific Interfaces.
+ *
+ *    An interface which is unique to a certain microprocessor should be
+ *    prefixed with the name of the microprocessor, for example stm32_,
+ *    and be prototyped in some header file in the arch/ directories.
+ *
+ *    There is also a arch/<architecture>/include/<chip>/chip.h header file
+ *    that can be used to communicate other microprocessor-specific
+ *    information between the board logic and even application logic.
+ *    Application logic may, for example, need to know specific capabilities
+ *    of the chip.  Prototypes in that chip.h header file should follow the
+ *    microprocessor specific naming convention.
+ *
+ * 3. Common Board Interfaces.
+ *
+ *    Any interface that is common across all boards should be prefixed
+ *    with board_ and should be prototyped in this header file. These
+ *    board_ definitions provide the interface between the board-level
+ *    logic and the architecture-specific logic.
+ *
+ *    Board related declarations are retained in this header file.
+ *
+ *    There is also a configs/<board>/include/board.h header file that
+ *    can be used to communicate other board-specific information between
+ *    the architecture logic and even application logic.  Any definitions
+ *    which are common between a single architecture and several boards
+ *    should go in this board.h header file; this file is reserved for
+ *    board-related definitions common to all architectures.
+ *
+ * 4. Board-Specific Interfaces.
+ *
+ *    Any interface which is unique to a board should be prefixed with
+ *    the board name, for example stm32f4discovery_. Sometimes the board
+ *    name is too long so stm32_ would be okay too. These should be
+ *    prototyped in configs/<board>/src/<board>.h and should not be used
+ *    outside of that board directory since board-specific definitions
+ *    have no meaning outside of the board directory.
+ */
 
 #ifndef __INCLUDE_NUTTX_BOARD_H
 #define __INCLUDE_NUTTX_BOARD_H
@@ -42,6 +100,10 @@
 
 #include <nuttx/config.h>
 
+#ifdef CONFIG_ARCH_IRQBUTTONS
+#  include <nuttx/irq.h>
+#endif
+
 /****************************************************************************
  * Public Function Prototypes
  *
@@ -51,6 +113,23 @@
  *
  ****************************************************************************/
 
+/****************************************************************************
+ * Name: board_initialize
+ *
+ * Description:
+ *   If CONFIG_BOARD_INITIALIZE is selected, then an additional
+ *   initialization call will be performed in the boot-up sequence to a
+ *   function called board_initialize().  board_initialize() will be
+ *   called immediately after up_initialize() is called and just before the
+ *   initial application is started.  This additional initialization phase
+ *   may be used, for example, to initialize board-specific device drivers.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_BOARD_INITIALIZE
+void board_initialize(void);
+#endif
+
 /****************************************************************************
  * Name: board_led_initialize
  *
@@ -144,4 +223,65 @@ void board_led_off(int led);
 # define board_led_off(led)
 #endif
 
+/****************************************************************************
+ * Name: board_button_initialize
+ *
+ * Description:
+ *   board_button_initialize() must be called to initialize button resources.
+ *   After that, board_buttons() may be called to collect the current state of
+ *   all buttons or board_button_irq() may be called to register button interrupt
+ *   handlers.
+ *
+ *   NOTE: This interface may or may not be supported by board-specific
+ *   logic.  If the board supports button interfaces, then CONFIG_ARCH_BUTTONS
+ *   will be defined.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_BUTTONS
+void board_button_initialize(void);
+#endif
+
+/****************************************************************************
+ * Name: board_buttons
+ *
+ * Description:
+ *   After board_button_initialize() has been called, board_buttons() may be
+ *   called to collect the state of all buttons.  board_buttons() returns an
+ *   8-bit bit set with each bit associated with a button.  A bit set to
+ *   "1" means that the button is depressed; a bit set to "0" means that
+ *   the button is released.  The correspondence of the each button bit
+ *   and physical buttons is board-specific.
+ *
+ *   NOTE: This interface may or may not be supported by board-specific
+ *   logic.  If the board supports button interfaces, then
+ *   CONFIG_ARCH_BUTTONS will be defined
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_BUTTONS
+uint8_t board_buttons(void);
+#endif
+
+/****************************************************************************
+ * Name: board_button_irq
+ *
+ * Description:
+ *   This function may be called to register an interrupt handler that will
+ *   be called when a button is depressed or released.  The ID value is a
+ *   button enumeration value that uniquely identifies a button resource.
+ *   The previous interrupt handler address is returned (so that it may
+ *   restored, if so desired).
+ *
+ *   NOTE: This interface may or may not be supported by board-specific
+ *   logic.  If the board supports any button interfaces, then
+ *   CONFIG_ARCH_BUTTONS will be defined; If the board supports interrupt
+ *   buttons, then CONFIG_ARCH_IRQBUTTONS will also be defined.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+xcpt_t board_button_irq(int id, xcpt_t irqhandler);
+#endif
+
 #endif /* __INCLUDE_NUTTX_BOARD_H */

sched/init/os_bringup.c

@@ -48,6 +48,7 @@
 #include <debug.h>
 
 #include <nuttx/arch.h>
+#include <nuttx/board.h>
 #include <nuttx/init.h>
 #include <nuttx/wqueue.h>
 #include <nuttx/kthread.h>