sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Spark configuration updates from David Sidrane

Browse Source
This commit is contained in:
Gregory Nutt 2013-10-16 08:20:57 -06:00
parent c511ebd035
commit 1734c7f8f5
12 changed files with 2947 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
configs/Kconfig
View File

@ -338,6 +338,8 @@ config ARCH_BOARD_MAPLE
bool "maple board" bool "maple board"
depends on ARCH_CHIP_STM32F103RB || ARCH_CHIP_STM32F103CB depends on ARCH_CHIP_STM32F103RB || ARCH_CHIP_STM32F103CB
select ARCH_HAVE_LEDS select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help--- ---help---
A configuration for the LeafLab's Maple and Maple Mini boards. A configuration for the LeafLab's Maple and Maple Mini boards.
These boards are based on the STM32F103RBT6 chip for the standard These boards are based on the STM32F103RBT6 chip for the standard
@ -551,9 +553,11 @@ config ARCH_BOARD_SPARK
bool "Spark Core" bool "Spark Core"
depends on ARCH_CHIP_STM32F103CB depends on ARCH_CHIP_STM32F103CB
select ARCH_HAVE_LEDS select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help--- ---help---
A configuration for the Spark Core from Spark Devices A configuration for the Spark Core from Spark Devices
(http://www.sparkdevices.com). This board features the STM32103CBT6 (http://www.spark.io). This board features the STM32103CBT6
MCU from STMicro. MCU from STMicro.
config ARCH_BOARD_STM32_TINY config ARCH_BOARD_STM32_TINY

113
configs/spark/composite/Make.defs Normal file
View File

@ -0,0 +1,113 @@
############################################################################
# configs/spark/composite/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
ifeq ($(CONFIG_STM32_DFU),y)
LDSCRIPT = ld.script.dfu
else
LDSCRIPT = ld.script
endif
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

907
configs/spark/composite/defconfig Normal file
View File

@ -0,0 +1,907 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
CONFIG_DEBUG=y
CONFIG_ARCH_HAVE_STACKCHECK=y
# CONFIG_DEBUG_VERBOSE is not set
#
# Subsystem Debug Options
#
# CONFIG_DEBUG_MM is not set
# CONFIG_DEBUG_SCHED is not set
# CONFIG_DEBUG_USB is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_LIB is not set
# CONFIG_DEBUG_BINFMT is not set
# CONFIG_DEBUG_GRAPHICS is not set
# CONFIG_DEBUG_IRQ is not set
# CONFIG_DEBUG_STACK is not set
#
# Driver Debug Options
#
# CONFIG_DEBUG_LEDS is not set
# CONFIG_DEBUG_ANALOG is not set
# CONFIG_DEBUG_SPI is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_DEBUG_AUDIO is not set
CONFIG_DEBUG_SYMBOLS=y
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAMA5 is not set
# CONFIG_ARCH_CHIP_SAM34 is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
# CONFIG_ARCH_ARM7TDMI is not set
# CONFIG_ARCH_ARM926EJS is not set
# CONFIG_ARCH_ARM920T is not set
# CONFIG_ARCH_CORTEXM0 is not set
CONFIG_ARCH_CORTEXM3=y
# CONFIG_ARCH_CORTEXM4 is not set
# CONFIG_ARCH_CORTEXA5 is not set
# CONFIG_ARCH_CORTEXA8 is not set
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_HAVE_FPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
# CONFIG_DEBUG_HARDFAULT is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_SERIAL_TERMIOS is not set
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32L151C6 is not set
# CONFIG_ARCH_CHIP_STM32L151C8 is not set
# CONFIG_ARCH_CHIP_STM32L151CB is not set
# CONFIG_ARCH_CHIP_STM32L151R6 is not set
# CONFIG_ARCH_CHIP_STM32L151R8 is not set
# CONFIG_ARCH_CHIP_STM32L151RB is not set
# CONFIG_ARCH_CHIP_STM32L151V6 is not set
# CONFIG_ARCH_CHIP_STM32L151V8 is not set
# CONFIG_ARCH_CHIP_STM32L151VB is not set
# CONFIG_ARCH_CHIP_STM32L152C6 is not set
# CONFIG_ARCH_CHIP_STM32L152C8 is not set
# CONFIG_ARCH_CHIP_STM32L152CB is not set
# CONFIG_ARCH_CHIP_STM32L152R6 is not set
# CONFIG_ARCH_CHIP_STM32L152R8 is not set
# CONFIG_ARCH_CHIP_STM32L152RB is not set
# CONFIG_ARCH_CHIP_STM32L152V6 is not set
# CONFIG_ARCH_CHIP_STM32L152V8 is not set
# CONFIG_ARCH_CHIP_STM32L152VB is not set
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
# CONFIG_ARCH_CHIP_STM32F103C4 is not set
# CONFIG_ARCH_CHIP_STM32F103C8 is not set
# CONFIG_ARCH_CHIP_STM32F103T8 is not set
# CONFIG_ARCH_CHIP_STM32F103TB is not set
CONFIG_ARCH_CHIP_STM32F103CB=y
# CONFIG_ARCH_CHIP_STM32F103R8 is not set
# CONFIG_ARCH_CHIP_STM32F103RB is not set
# CONFIG_ARCH_CHIP_STM32F103V8 is not set
# CONFIG_ARCH_CHIP_STM32F103VB is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
# CONFIG_ARCH_CHIP_STM32F407VG is not set
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
# CONFIG_STM32_STM32L15XX is not set
# CONFIG_STM32_ENERGYLITE is not set
CONFIG_STM32_STM32F10XX=y
# CONFIG_STM32_VALUELINE is not set
# CONFIG_STM32_CONNECTIVITYLINE is not set
CONFIG_STM32_PERFORMANCELINE=y
# CONFIG_STM32_HIGHDENSITY is not set
CONFIG_STM32_MEDIUMDENSITY=y
# CONFIG_STM32_LOWDENSITY is not set
# CONFIG_STM32_STM32F20XX is not set
# CONFIG_STM32_STM32F30XX is not set
# CONFIG_STM32_STM32F40XX is not set
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
# CONFIG_STM32_ADC1 is not set
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
# CONFIG_STM32_BKP is not set
# CONFIG_STM32_CAN1 is not set
CONFIG_STM32_CRC=y
# CONFIG_STM32_DMA1 is not set
# CONFIG_STM32_DMA2 is not set
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_I2C1 is not set
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_PWR is not set
# CONFIG_STM32_SDIO is not set
# CONFIG_STM32_SPI1 is not set
CONFIG_STM32_SPI2=y
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
# CONFIG_STM32_TIM3 is not set
# CONFIG_STM32_TIM4 is not set
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
# CONFIG_STM32_USART1 is not set
CONFIG_STM32_USART2=y
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
CONFIG_STM32_USB=y
# CONFIG_STM32_IWDG is not set
# CONFIG_STM32_WWDG is not set
CONFIG_STM32_SPI=y
#
# Alternate Pin Mapping
#
# CONFIG_STM32_USART2_REMAP is not set
# CONFIG_STM32_JTAG_DISABLE is not set
CONFIG_STM32_JTAG_FULL_ENABLE=y
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
# CONFIG_STM32_JTAG_SW_ENABLE is not set
# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
# CONFIG_STM32_FORCEPOWER is not set
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
CONFIG_STM32_USART=y
#
# U[S]ART Configuration
#
# CONFIG_USART2_RS485 is not set
# CONFIG_SERIAL_DISABLE_REORDERING is not set
# CONFIG_STM32_USART_SINGLEWIRE is not set
#
# SPI Configuration
#
# CONFIG_STM32_SPI_INTERRUPTS is not set
CONFIG_STM32_SPI_DMA=y
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=5483
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Boot Memory Configuration
#
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=20480
#
# Board Selection
#
# CONFIG_ARCH_BOARD_MAPLE is not set
CONFIG_ARCH_BOARD_SPARK=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="spark"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_IRQBUTTONS=y
#
# Board-Specific Options
#
CONFIG_SPARK_FLASH=y
CONFIG_SPARK_FLASH_SPI=2
CONFIG_SPARK_FLASH_MINOR=0
CONFIG_SPARK_FLASH_PART=y
CONFIG_SPARK_FLASH_PART_LIST="256,768"
#
# RTOS Features
#
CONFIG_BOARD_INITIALIZE=y
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2009
CONFIG_START_MONTH=11
CONFIG_START_DAY=30
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
# CONFIG_SCHED_WAITPID is not set
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="conn_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
CONFIG_SIG_SIGWORK=17
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=1024
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
CONFIG_ARCH_HAVE_I2CRESET=y
CONFIG_SPI=y
# CONFIG_SPI_OWNBUS is not set
CONFIG_SPI_EXCHANGE=y
# CONFIG_SPI_CMDDATA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
CONFIG_ANALOG=y
# CONFIG_ADC is not set
# CONFIG_DAC is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
CONFIG_MTD=y
#
# MTD Configuration
#
CONFIG_MTD_PARTITION=y
CONFIG_MTD_BYTE_WRITE=y
#
# MTD Device Drivers
#
# CONFIG_RAMMTD is not set
# CONFIG_MTD_AT24XX is not set
# CONFIG_MTD_AT25 is not set
# CONFIG_MTD_AT45DB is not set
# CONFIG_MTD_M25P is not set
# CONFIG_MTD_SMART is not set
# CONFIG_MTD_RAMTRON is not set
CONFIG_MTD_SST25=y
CONFIG_SST25_SPIMODE=1
CONFIG_SST25_SPIFREQUENCY=20000000
# CONFIG_SST25_READONLY is not set
# CONFIG_SST25_SECTOR512 is not set
CONFIG_SST25_SLOWWRITE=y
# CONFIG_SST25_SLOWREAD is not set
# CONFIG_MTD_SST39FV is not set
# CONFIG_MTD_W25 is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
CONFIG_SERIAL_REMOVABLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_USART2=y
#
# USART Configuration
#
CONFIG_USART2_ISUART=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
# CONFIG_SERIAL_TIOCSERGSTRUCT is not set
CONFIG_USART2_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# USART2 Configuration
#
CONFIG_USART2_RXBUFSIZE=256
CONFIG_USART2_TXBUFSIZE=256
CONFIG_USART2_BAUD=115200
CONFIG_USART2_BITS=8
CONFIG_USART2_PARITY=0
CONFIG_USART2_2STOP=0
# CONFIG_USART2_IFLOWCONTROL is not set
# CONFIG_USART2_OFLOWCONTROL is not set
# CONFIG_SERIAL_IFLOWCONTROL is not set
# CONFIG_SERIAL_OFLOWCONTROL is not set
CONFIG_USBDEV=y
#
# USB Device Controller Driver Options
#
# CONFIG_USBDEV_ISOCHRONOUS is not set
# CONFIG_USBDEV_DUALSPEED is not set
CONFIG_USBDEV_SELFPOWERED=y
# CONFIG_USBDEV_BUSPOWERED is not set
CONFIG_USBDEV_MAXPOWER=100
# CONFIG_USBDEV_DMA is not set
CONFIG_USBDEV_TRACE=y
CONFIG_USBDEV_TRACE_NRECORDS=32
# CONFIG_USBDEV_TRACE_STRINGS is not set
#
# USB Device Class Driver Options
#
CONFIG_USBDEV_COMPOSITE=y
CONFIG_COMPOSITE_IAD=y
CONFIG_COMPOSITE_EP0MAXPACKET=64
CONFIG_COMPOSITE_VENDORID=0x03eb
CONFIG_COMPOSITE_VENDORSTR="NuttX"
CONFIG_COMPOSITE_PRODUCTID=0x2022
CONFIG_COMPOSITE_PRODUCTSTR="Composite Device"
CONFIG_COMPOSITE_SERIALSTR="12345"
CONFIG_COMPOSITE_CONFIGSTR="system/composite"
CONFIG_COMPOSITE_VERSIONNO=0x1010
# CONFIG_PL2303 is not set
CONFIG_CDCACM=y
# CONFIG_CDCACM_CONSOLE is not set
CONFIG_CDCACM_COMPOSITE=y
CONFIG_CDCACM_IFNOBASE=0
CONFIG_CDCACM_STRBASE=4
CONFIG_CDCACM_EP0MAXPACKET=64
CONFIG_CDCACM_EPINTIN=1
CONFIG_CDCACM_EPINTIN_FSSIZE=64
CONFIG_CDCACM_EPINTIN_HSSIZE=64
CONFIG_CDCACM_EPBULKOUT=3
CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
CONFIG_CDCACM_EPBULKIN=2
CONFIG_CDCACM_EPBULKIN_FSSIZE=64
CONFIG_CDCACM_EPBULKIN_HSSIZE=512
CONFIG_CDCACM_NWRREQS=4
CONFIG_CDCACM_NRDREQS=4
CONFIG_CDCACM_BULKIN_REQLEN=96
CONFIG_CDCACM_RXBUFSIZE=256
CONFIG_CDCACM_TXBUFSIZE=256
CONFIG_CDCACM_VENDORID=0x0525
CONFIG_CDCACM_PRODUCTID=0xa4a7
CONFIG_CDCACM_VENDORSTR="NuttX"
CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial"
CONFIG_USBMSC=y
CONFIG_USBMSC_COMPOSITE=y
CONFIG_USBMSC_IFNOBASE=2
CONFIG_USBMSC_STRBASE=4
CONFIG_USBMSC_EP0MAXPACKET=64
CONFIG_USBMSC_EPBULKOUT=4
CONFIG_USBMSC_EPBULKIN=5
CONFIG_USBMSC_NWRREQS=2
CONFIG_USBMSC_NRDREQS=2
CONFIG_USBMSC_BULKINREQLEN=256
CONFIG_USBMSC_BULKOUTREQLEN=256
CONFIG_USBMSC_VENDORID=0x584e
CONFIG_USBMSC_VENDORSTR="NuttX"
CONFIG_USBMSC_PRODUCTID=0x5342
CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
CONFIG_USBMSC_VERSIONNO=0x0399
# CONFIG_USBMSC_REMOVABLE is not set
# CONFIG_USBHOST is not set
CONFIG_WIRELESS=y
# CONFIG_WL_CC1101 is not set
CONFIG_WL_CC3000=y
# CONFIG_CC3000_MULTIPLE is not set
CONFIG_CC3000_SPIDEV=2
CONFIG_CC3000_DEVMINOR=0
CONFIG_CC3000_SPI_MODE=0
CONFIG_CC3000_SPI_FREQUENCY=16000000
# CONFIG_WL_NRF24L01 is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
CONFIG_FS_FAT=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_MAXFNAME=32
CONFIG_FS_FATTIME=y
# CONFIG_FAT_DMAMEMORY is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=1
# CONFIG_GRAN is not set
#
# Audio Support
#
# CONFIG_AUDIO is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
# CONFIG_BUILTIN is not set
# CONFIG_PIC is not set
CONFIG_SYMTAB_ORDEREDBYNAME=y
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_WORKPRIORITY=192
CONFIG_SCHED_WORKPERIOD=50000
CONFIG_SCHED_WORKSTACKSIZE=1024
# CONFIG_SCHED_LPWORK is not set
# CONFIG_LIB_KBDCODEC is not set
# CONFIG_LIB_SLCDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CC3000BASIC is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MTDPART is not set
# CONFIG_EXAMPLES_NRF24L01TERM is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SLCD is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TCPECHO is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
# CONFIG_NSH_LIBRARY is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# USB CDC/ACM Device Commands
#
# CONFIG_SYSTEM_CDCACM is not set
#
# USB Composite Device Commands
#
CONFIG_SYSTEM_COMPOSITE=y
CONFIG_SYSTEM_COMPOSITE_NLUNS=2
CONFIG_SYSTEM_COMPOSITE_DEVMINOR1=0
CONFIG_SYSTEM_COMPOSITE_DEVPATH1="/dev/mtdblock0"
CONFIG_SYSTEM_COMPOSITE_DEVMINOR2=1
CONFIG_SYSTEM_COMPOSITE_DEVPATH2="/dev/mtdblock1"
CONFIG_SYSTEM_COMPOSITE_DEVMINOR3=2
CONFIG_SYSTEM_COMPOSITE_DEVPATH3="/dev/mmcsd2"
CONFIG_SYSTEM_COMPOSITE_TTYUSB=0
CONFIG_SYSTEM_COMPOSITE_SERDEV="/dev/ttyACM0"
CONFIG_SYSTEM_COMPOSITE_BUFSIZE=256
# CONFIG_SYSTEM_COMPOSITE_TRACEINIT is not set
# CONFIG_SYSTEM_COMPOSITE_TRACECLASS is not set
# CONFIG_SYSTEM_COMPOSITE_TRACETRANSFERS is not set
# CONFIG_SYSTEM_COMPOSITE_TRACECONTROLLER is not set
# CONFIG_SYSTEM_COMPOSITE_TRACEINTERRUPTS is not set
# CONFIG_SYSTEM_COMPOSITE_DEBUGMM is not set
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# RAM test
#
# CONFIG_SYSTEM_RAMTEST is not set
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor
#
# CONFIG_SYSTEM_USBMONITOR is not set
#
# Stack Monitor
#
#
# USB Mass Storage Device Commands
#
# CONFIG_SYSTEM_USBMSC is not set
#
# Zmodem Commands
#
# CONFIG_SYSTEM_ZMODEM is not set

67
configs/spark/composite/setenv.sh Normal file
View File

@ -0,0 +1,67 @@
#!/bin/bash
# configs/spark/composite/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

298
configs/spark/src/up_autoleds.c Normal file
View File

@ -0,0 +1,298 @@
/****************************************************************************
* configs/spark/src/up_autoleds.c
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* David Sidrane <david_s5@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32.h"
#include "spark.h"
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/* The following definitions map the encoded LED setting to bit sets used to
* manipulate the LEDs. All terms are in true logic, the led polarity is dealt
* with in the phy_xxx operations
*/
#define ON_SETBITS_SHIFT (0)
#define ON_CLRBITS_SHIFT (4)
#define OFF_SETBITS_SHIFT (8)
#define OFF_CLRBITS_SHIFT (12)
#define ON_BITS(v) ((v) & 0xff)
#define OFF_BITS(v) (((v) >> 8) & 0x0ff)
#define SETBITS(b) ((b) & 0x0f)
#define CLRBITS(b) (((b) >> 4) & 0x0f)
#define ON_SETBITS(v) (SETBITS(ON_BITS(v))
#define ON_CLRBITS(v) (CLRBITS(ON_BITS(v))
#define OFF_SETBITS(v) (SETBITS(OFF_BITS(v))
#define OFF_CLRBITS(v) (CLRBITS(OFF_BITS(v))
#define LED_STARTED_ON_SETBITS ((BOARD_RED_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_STARTED_ON_CLRBITS ((BOARD_GREEN_LED_BIT|BOARD_BLUE_LED_BIT|BOARD_USR_LED_BIT) << ON_CLRBITS_SHIFT)
#define LED_STARTED_OFF_SETBITS (0 << OFF_SETBITS_SHIFT)
#define LED_STARTED_OFF_CLRBITS ((BOARD_RED_LED_BIT|BOARD_GREEN_LED_BIT|BOARD_BLUE_LED_BIT|BOARD_USR_LED_BIT) << OFF_CLRBITS_SHIFT)
#define LED_HEAPALLOCATE_ON_SETBITS ((BOARD_BLUE_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_HEAPALLOCATE_ON_CLRBITS ((BOARD_RED_LED_BIT|BOARD_GREEN_LED_BIT|BOARD_USR_LED_BIT) << ON_CLRBITS_SHIFT)
#define LED_HEAPALLOCATE_OFF_SETBITS ((BOARD_RED_LED_BIT) << OFF_SETBITS_SHIFT)
#define LED_HEAPALLOCATE_OFF_CLRBITS ((BOARD_GREEN_LED_BIT|BOARD_BLUE_LED_BIT|BOARD_USR_LED_BIT) << OFF_CLRBITS_SHIFT)
#define LED_IRQSENABLED_ON_SETBITS ((BOARD_RED_LED_BIT|BOARD_GREEN_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_IRQSENABLED_ON_CLRBITS ((BOARD_BLUE_LED_BIT|BOARD_USR_LED_BIT) << ON_CLRBITS_SHIFT)
#define LED_IRQSENABLED_OFF_SETBITS ((BOARD_BLUE_LED_BIT) << OFF_SETBITS_SHIFT)
#define LED_IRQSENABLED_OFF_CLRBITS ((BOARD_RED_LED_BIT|BOARD_GREEN_LED_BIT|BOARD_USR_LED_BIT) << OFF_CLRBITS_SHIFT)
#define LED_STACKCREATED_ON_SETBITS ((BOARD_GREEN_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_STACKCREATED_ON_CLRBITS ((BOARD_RED_LED_BIT|BOARD_BLUE_LED_BIT|BOARD_USR_LED_BIT) << ON_CLRBITS_SHIFT)
#define LED_STACKCREATED_OFF_SETBITS ((BOARD_RED_LED_BIT|BOARD_GREEN_LED_BIT) << OFF_SETBITS_SHIFT)
#define LED_STACKCREATED_OFF_CLRBITS ((BOARD_BLUE_LED_BIT|BOARD_USR_LED_BIT) << OFF_CLRBITS_SHIFT)
#define LED_INIRQ_ON_SETBITS ((BOARD_RED_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_INIRQ_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_INIRQ_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_INIRQ_OFF_CLRBITS ((BOARD_RED_LED_BIT) << OFF_CLRBITS_SHIFT)
#define LED_SIGNAL_ON_SETBITS ((BOARD_BLUE_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_SIGNAL_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_SIGNAL_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_SIGNAL_OFF_CLRBITS ((BOARD_BLUE_LED_BIT) << OFF_CLRBITS_SHIFT)
#define LED_ASSERTION_ON_SETBITS ((BOARD_RED_LED_BIT|BOARD_GREEN_LED_BIT|BOARD_BLUE_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_ASSERTION_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_ASSERTION_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_ASSERTION_OFF_CLRBITS ((BOARD_RED_LED_BIT|BOARD_GREEN_LED_BIT|BOARD_BLUE_LED_BIT) << OFF_CLRBITS_SHIFT)
#define LED_PANIC_ON_SETBITS ((BOARD_RED_LED_BIT) << ON_SETBITS_SHIFT)
#define LED_PANIC_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_PANIC_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_PANIC_OFF_CLRBITS ((BOARD_RED_LED_BIT) << OFF_CLRBITS_SHIFT)
/**************************************************************************************
* Private Function Prototypes
**************************************************************************************/
/* LED State Controls */
static inline void phy_led_on(unsigned int on_bitset);
static inline void phy_led_off(unsigned int off_bitset);
static void led_setonoff(unsigned int bitset);
/****************************************************************************
* Private Data
****************************************************************************/
static const uint16_t g_ledbits[LED_NUM_CODES] =
{
(LED_STARTED_ON_SETBITS | LED_STARTED_ON_CLRBITS |
LED_STARTED_OFF_SETBITS | LED_STARTED_OFF_CLRBITS),
(LED_HEAPALLOCATE_ON_SETBITS | LED_HEAPALLOCATE_ON_CLRBITS |
LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS),
(LED_IRQSENABLED_ON_SETBITS | LED_IRQSENABLED_ON_CLRBITS |
LED_IRQSENABLED_OFF_SETBITS | LED_IRQSENABLED_OFF_CLRBITS),
(LED_STACKCREATED_ON_SETBITS | LED_STACKCREATED_ON_CLRBITS |
LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS),
(LED_INIRQ_ON_SETBITS | LED_INIRQ_ON_CLRBITS |
LED_INIRQ_OFF_SETBITS | LED_INIRQ_OFF_CLRBITS),
(LED_SIGNAL_ON_SETBITS | LED_SIGNAL_ON_CLRBITS |
LED_SIGNAL_OFF_SETBITS | LED_SIGNAL_OFF_CLRBITS),
(LED_ASSERTION_ON_SETBITS | LED_ASSERTION_ON_CLRBITS |
LED_ASSERTION_OFF_SETBITS | LED_ASSERTION_OFF_CLRBITS),
(LED_PANIC_ON_SETBITS | LED_PANIC_ON_CLRBITS |
LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS)
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: phy_led_on
*
* Description:
* Performs the physical IO to turn On LEDs to the bit encoded state
*
****************************************************************************/
static inline void phy_led_on(unsigned int on_bitset)
{
/* All RGB LEDs are pulled up and, hence, active low */
if ((on_bitset & BOARD_RED_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED1, false);
}
if ((on_bitset & BOARD_GREEN_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED2, false);
}
if ((on_bitset & BOARD_BLUE_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED3, false);
}
/* USR LED is pulled down and, hence, active high */
if ((on_bitset & BOARD_USR_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED4, true);
}
}
/****************************************************************************
* Name: phy_led_off
*
* Description:
* Performs the physical IO to turn Off LEDs to the bit encoded state
*
****************************************************************************/
static inline void phy_led_off(unsigned int off_bitset)
{
/* All RGB LEDs are pulled up and, hence, active low */
if ((off_bitset & BOARD_RED_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED1, true);
}
if ((off_bitset & BOARD_GREEN_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED2, true);
}
if ((off_bitset & BOARD_BLUE_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED3, true);
}
/* USR LED is pulled down and, hence, active high */
if ((off_bitset & BOARD_USR_LED_BIT) != 0)
{
stm32_gpiowrite(GPIO_LED4, false);
}
}
/****************************************************************************
* Name: led_setonoff
*
* Description:
* Set/clear all LEDs to the bit encoded state
*
****************************************************************************/
static void led_setonoff(unsigned int bits)
{
phy_led_off(CLRBITS(bits));
phy_led_on(SETBITS(bits));
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
void up_ledinit(void)
{
/* Configure LED1-4 GPIOs for output */
stm32_configgpio(GPIO_LED1);
stm32_configgpio(GPIO_LED2);
stm32_configgpio(GPIO_LED3);
stm32_configgpio(GPIO_LED4);
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
led_setonoff(ON_BITS(g_ledbits[led]));
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
led_setonoff(OFF_BITS(g_ledbits[led]));
}
#endif /* CONFIG_ARCH_LEDS */

133
configs/spark/src/up_buttons.c Normal file
View File

@ -0,0 +1,133 @@
/****************************************************************************
* configs/spark/src/up_buttons.c
*
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <arch/board/board.h>
#include "spark.h"
#ifdef CONFIG_ARCH_BUTTONS
/****************************************************************************
* Definitions
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_buttoninit
*
* Description:
* up_buttoninit() must be called to initialize button resources. After
* that, up_buttons() may be called to collect the current state of all
* buttons or up_irqbutton() may be called to register button interrupt
* handlers.
*
****************************************************************************/
void up_buttoninit(void)
{
/* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are
* configured for all pins.
*/
stm32_configgpio(GPIO_BTN);
}
/****************************************************************************
* Name: up_buttons
*
* N.B The return state in true logic, the button polarity is dealt here in
****************************************************************************/
uint8_t up_buttons(void)
{
return stm32_gpioread(GPIO_BTN)==0 ? BUTTON_USER_BIT : 0;
}
/************************************************************************************
* Button support.
*
* Description:
* up_buttoninit() must be called to initialize button resources. After
* that, up_buttons() may be called to collect the current state of all
* buttons or up_irqbutton() may be called to register button interrupt
* handlers.
*
* After up_buttoninit() has been called, up_buttons() may be called to
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
* with each bit associated with a button. See the BUTTON_*_BIT
* definitions in board.h for the meaning of each bit.
*
* up_irqbutton() may be called to register an interrupt handler that will
* be called when a button is depressed or released. The ID value is a
* button enumeration value that uniquely identifies a button resource. See the
* BUTTON_* definitions in board.h for the meaning of enumeration
* value. The previous interrupt handler address is returned (so that it may
* restored, if so desired).
*
************************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
xcpt_t up_irqbutton(int id, xcpt_t irqhandler)
{
xcpt_t oldhandler = NULL;
/* The following should be atomic */
if (id == BUTTON_USER)
{
oldhandler = stm32_gpiosetevent(GPIO_BTN, true, true, true, irqhandler);
}
return oldhandler;
}
#endif
#endif /* CONFIG_ARCH_BUTTONS */

264
configs/spark/src/up_composite.c Normal file
View File

@ -0,0 +1,264 @@
/****************************************************************************
* config/spark/src/up_composite.c
* arch/arm/src/board/up_composit.c
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* David_s5 <david_s5@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/kmalloc.h>
#ifdef CONFIG_MTD_SST25
# include <nuttx/spi/spi.h>
# include <nuttx/mtd.h>
# include <sys/mount.h>
#endif
#ifdef CONFIG_SYSTEM_USBMONITOR
# include <apps/usbmonitor.h>
#endif
#ifdef CONFIG_USBDEV
# include "stm32_usbdev.h"
#endif
#include "stm32.h"
#include "spark.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Can't support the SST25 device if it SPI2 or SST25 support is not enabled */
#define HAVE_SST25 1
#if !defined(CONFIG_STM32_SPI2) || !defined(CONFIG_MTD_SST25)
# undef HAVE_SST25
#endif
/* Can't support SST25 features if mountpoints are disabled */
#if defined(CONFIG_DISABLE_MOUNTPOINT)
# undef HAVE_SST25
#endif
#ifndef CONFIG_SPARK_FLASH_MOUNT_POINT
# define CONFIG_SPARK_FLASH_MOUNT_POINT "/mnt/p%d"
#endif
/* Use minor device number 0 is not is provided */
#ifndef CONFIG_SPARK_FLASH_MINOR
# define CONFIG_SPARK_FLASH_MINOR 0
#endif
/* Can't support both FAT and NXFFS */
#if defined(CONFIG_FS_FAT) && defined(CONFIG_FS_NXFFS)
# warning "Can't support both FAT and NXFFS -- using FAT"
#endif
#define HAVE_USBDEV 1
#define HAVE_USBMONITOR 1
/* Can't support USB device is USB device is not enabled */
#ifndef CONFIG_USBDEV
# undef HAVE_USBDEV
# undef HAVE_USBMONITOR
#endif
/* Check if we should enable the USB monitor before starting NSH */
#if !defined(CONFIG_USBDEV_TRACE) || !defined(CONFIG_SYSTEM_USBMONITOR)
# undef HAVE_USBMONITOR
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int composite_archinitialize(void)
{
#ifdef HAVE_SST25
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
int ret;
/* Configure SPI-based devices */
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port %d\n",CONFIG_SPARK_FLASH_SPI);
spi = up_spiinitialize(CONFIG_SPARK_FLASH_SPI);
if (!spi)
{
message("nsh_archinitialize: ERROR: Failed to initialize SPI port %d\n",CONFIG_SPARK_FLASH_SPI);
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port %d\n",CONFIG_SPARK_FLASH_SPI);
/* Now bind the SPI interface to the SST25 SPI FLASH driver */
message("nsh_archinitialize: Bind SPI to the SPI flash driver\n");
mtd = sst25_initialize((FAR struct spi_dev_s *)spi);
if (!mtd)
{
message("nsh_archinitialize: Failed to bind SPI port %d to the SPI FLASH driver\n",CONFIG_SPARK_FLASH_SPI);
return -ENODEV;
}
else
{
message("nsh_archinitialize: Successfully bound SPI port %d to the SPI FLASH driver\n",CONFIG_SPARK_FLASH_SPI);
}
#ifdef CONFIG_SPARK_FLASH_PART
{
int partno;
int partsize;
int partoffset;
const char *partstring = CONFIG_SPARK_FLASH_PART_LIST;
const char *ptr;
FAR struct mtd_dev_s *mtd_part;
char partname[16];
char mntpoint[16];
/* Now create a partition on the FLASH device */
partno = CONFIG_SPARK_FLASH_MINOR;
ptr = partstring;
partoffset = 0;
while (*ptr != '\0')
{
/* Get the partition size */
partsize = atoi(ptr);
mtd_part = mtd_partition(mtd, partoffset, (partsize>>2)*16);
partoffset += (partsize >> 2) * 16;
/* Use the FTL layer to wrap the MTD driver as a block driver */
ret = ftl_initialize(partno, mtd_part);
if (ret < 0)
{
fdbg("ERROR: Initialize the FTL layer\n");
return ret;
}
snprintf(partname,sizeof(partname), "/dev/mtdblock%d", partno);
snprintf(mntpoint,sizeof(mntpoint)-1,CONFIG_SPARK_FLASH_MOUNT_POINT,partno);
/* Mount the file system at /mnt/pn */
ret = mount(partname, mntpoint, "vfat", 0, NULL);
if (ret < 0)
{
fdbg("ERROR: Failed to mount the FAT volume: %d\n", errno);
return ret;
}
/* Update the pointer to point to the next size in the list */
while ((*ptr >= '0') && (*ptr <= '9'))
{
ptr++;
}
if (*ptr == ',')
{
ptr++;
}
/* Increment the part number */
partno++;
}
}
#endif /* ONFIG_SPARK_FLASH_PART */
#endif /* HAVE_SST25 */
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
message("nsh_archinitialize: Start USB monitor: %d\n", ret);
}
#endif
return OK;
}

153
configs/spark/src/up_cxxinitialize.c Normal file
View File

@ -0,0 +1,153 @@
/************************************************************************************
* configs/spark/src/up_cxxinitialize.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <arch/stm32/chip.h>
#include "chip.h"
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
/************************************************************************************
* Definitions
************************************************************************************/
/* Debug ****************************************************************************/
/* Non-standard debug that may be enabled just for testing the static constructors */
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_CXX
#endif
#ifdef CONFIG_DEBUG_CXX
# define cxxdbg dbg
# define cxxlldbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define cxxvdbg vdbg
# define cxxllvdbg llvdbg
# else
# define cxxvdbg(x...)
# define cxxllvdbg(x...)
# endif
#else
# define cxxdbg(x...)
# define cxxlldbg(x...)
# define cxxvdbg(x...)
# define cxxllvdbg(x...)
#endif
/************************************************************************************
* Private Types
************************************************************************************/
/* This type defines one entry in initialization array */
typedef void (*initializer_t)(void);
/************************************************************************************
* External references
************************************************************************************/
/* _sinit and _einit are symbols exported by the linker script that mark the
* beginning and the end of the C++ initialization section.
*/
extern initializer_t _sinit;
extern initializer_t _einit;
/* _stext and _etext are symbols exported by the linker script that mark the
* beginning and the end of text.
*/
extern uint32_t _stext;
extern uint32_t _etext;
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/****************************************************************************
* Name: up_cxxinitialize
*
* Description:
* If C++ and C++ static constructors are supported, then this function
* must be provided by board-specific logic in order to perform
* initialization of the static C++ class instances.
*
* This function should then be called in the application-specific
* user_start logic in order to perform the C++ initialization. NOTE
* that no component of the core NuttX RTOS logic is involved; This
* function definition only provides the 'contract' between application
* specific C++ code and platform-specific toolchain support
*
***************************************************************************/
void up_cxxinitialize(void)
{
initializer_t *initp;
cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n",
&_sinit, &_einit, &_stext, &_etext);
/* Visit each entry in the initialzation table */
for (initp = &_sinit; initp != &_einit; initp++)
{
initializer_t initializer = *initp;
cxxdbg("initp: %p initializer: %p\n", initp, initializer);
/* Make sure that the address is non-NULL and lies in the text region
* defined by the linker script. Some toolchains may put NULL values
* or counts in the initialization table
*/
if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext)
{
cxxdbg("Calling %p\n", initializer);
initializer();
}
}
}
#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */

260
configs/spark/src/up_nsh.c Normal file
View File

@ -0,0 +1,260 @@
/****************************************************************************
* config/spark/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* David_s5 <david_s5@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/kmalloc.h>
#ifdef CONFIG_MTD_SST25
# include <nuttx/spi/spi.h>
# include <nuttx/mtd.h>
#endif
#ifdef CONFIG_SYSTEM_USBMONITOR
# include <apps/usbmonitor.h>
#endif
#ifdef CONFIG_USBDEV
# include "stm32_usbdev.h"
#endif
#include "stm32.h"
#include "spark.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Can't support the SST25 device if it SPI2 or SST25 support is not enabled */
#define HAVE_SST25 1
#if !defined(CONFIG_STM32_SPI2) || !defined(CONFIG_MTD_SST25)
# undef HAVE_SST25
#endif
/* Can't support SST25 features if mountpoints are disabled */
#if defined(CONFIG_DISABLE_MOUNTPOINT)
# undef HAVE_SST25
#endif
#ifndef CONFIG_SPARK_FLASH_MOUNT_POINT
# define CONFIG_SPARK_FLASH_MOUNT_POINT "/mnt/p%d"
#endif
/* Use minor device number 0 is not is provided */
#ifndef CONFIG_SPARK_FLASH_MINOR
# define CONFIG_SPARK_FLASH_MINOR 0
#endif
/* Can't support both FAT and NXFFS */
#if defined(CONFIG_FS_FAT) && defined(CONFIG_FS_NXFFS)
# warning "Can't support both FAT and NXFFS -- using FAT"
#endif
#define HAVE_USBDEV 1
#define HAVE_USBMONITOR 1
/* Can't support USB device is USB device is not enabled */
#ifndef CONFIG_USBDEV
# undef HAVE_USBDEV
# undef HAVE_USBMONITOR
#endif
/* Check if we should enable the USB monitor before starting NSH */
#if !defined(CONFIG_USBDEV_TRACE) || !defined(CONFIG_SYSTEM_USBMONITOR)
# undef HAVE_USBMONITOR
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
#ifdef HAVE_SST25
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
int ret;
/* Configure SPI-based devices */
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port %d\n",CONFIG_SPARK_FLASH_SPI);
spi = up_spiinitialize(CONFIG_SPARK_FLASH_SPI);
if (!spi)
{
message("nsh_archinitialize: ERROR: Failed to initialize SPI port %d\n",CONFIG_SPARK_FLASH_SPI);
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port %d\n",CONFIG_SPARK_FLASH_SPI);
/* Now bind the SPI interface to the SST25 SPI FLASH driver */
message("nsh_archinitialize: Bind SPI to the SPI flash driver\n");
mtd = sst25_initialize(spi);
if (!mtd)
{
message("nsh_archinitialize: Failed to bind SPI port %d to the SPI FLASH driver\n",CONFIG_SPARK_FLASH_SPI););
}
else
{
message("nsh_archinitialize: Successfully bound SPI port %d to the SPI FLASH driver\n",CONFIG_SPARK_FLASH_SPI);
}
#ifdef CONFIG_SPARK_FLASH_PART
{
int partno;
int partsize;
int partoffset;
const char *partstring = CONFIG_SPARK_FLASH_PART_LIST;
const char *ptr;
FAR struct mtd_dev_s *mtd_part;
char partname[16];
char mntpoint[16];
/* Now create a partition on the FLASH device */
partno = CONFIG_SPARK_FLASH_MINOR;
ptr = partstring;
partoffset = 0;
while (*ptr != '\0')
{
/* Get the partition size */
partsize = atoi(ptr);
mtd_part = mtd_partition(mtd, partoffset, (partsize>>2)*16);
partoffset += (partsize >> 2) * 16;
/* Use the FTL layer to wrap the MTD driver as a block driver */
ret = ftl_initialize(partno, mtd_part);
if (ret < 0)
{
fdbg("ERROR: Initialize the FTL layer\n");
return ret;
}
snprintf(partname,sizeof(partname), "/dev/mtdblock%d", partno);
snprintf(mntpoint,sizeof(mntpoint)-1,CONFIG_SPARK_FLASH_MOUNT_POINT,partno);
/* Mount the file system at /mnt/pn */
ret = mount(partname, mntpoint, "vfat", 0, NULL);
if (ret < 0)
{
fdbg("ERROR: Failed to mount the FAT volume: %d\n", errno);
return ret;
}
/* Update the pointer to point to the next size in the list */
while ((*ptr >= '0') && (*ptr <= '9'))
{
ptr++;
}
if (*ptr == ',')
{
ptr++;
}
/* Increment the part number */
partno++;
}
}
#endif /* HAVE_SST25 */
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
message("nsh_archinitialize: Start USB monitor: %d\n", ret);
}
#endif
return OK;
}

242
configs/spark/src/up_spi.c Normal file
View File

@ -0,0 +1,242 @@
/************************************************************************************
* configs/spark/src/up_spi.c
*
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Modifications:
*
* - 10/8/2013: David Sidrane
* - Modified to support SPI2 on the Spark Core.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/spi/spi.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "stm32.h"
#include "spark.h"
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
/************************************************************************************
* Definitions
************************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
#undef SPI_DEBUG /* Define to enable debug */
#undef SPI_VERBOSE /* Define to enable verbose debug */
#ifdef SPI_DEBUG
# define spidbg lldbg
# ifdef SPI_VERBOSE
# define spivdbg lldbg
# else
# define spivdbg(x...)
# endif
#else
# undef SPI_VERBOSE
# define spidbg(x...)
# define spivdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Spark board.
*
************************************************************************************/
void weak_function stm32_spiinitialize(void)
{
#ifdef CONFIG_STM32_SPI2
/* Setup CS, EN & IRQ line IOs */
#ifdef CONFIG_WL_CC3000
stm32_configgpio(GPIO_WIFI_CS);
stm32_configgpio(GPIO_WIFI_EN);
stm32_configgpio(GPIO_WIFI_INT);
#endif
#ifdef CONFIG_MTD_SST25
stm32_configgpio(GPIO_MEM_CS); /* FLASH chip select */
#endif
#endif
}
/****************************************************************************
* Name: stm32_spi1/2/3select and stm32_spi1/2/3status
*
* Description:
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
* provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
* board-specific logic. These functions will perform chip selection and
* status operations using GPIOs in the way your board is configured.
* 3. Add a calls to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
****************************************************************************/
#ifdef CONFIG_STM32_SPI1
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
}
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
return 0;
}
#endif
#ifdef CONFIG_STM32_SPI2
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
#if defined(CONFIG_MTD_SST25)
if (devid == SPIDEV_FLASH)
{
stm32_gpiowrite(GPIO_MEM_CS, !selected);
}
else
#endif
#if defined(CONFIG_WL_CC3000)
if (devid == SPIDEV_WIRELESS)
{
stm32_gpiowrite(GPIO_WIFI_CS, !selected);
}
#endif
}
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
return 0;
}
#endif
#ifdef CONFIG_STM32_SPI3
void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
}
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
return 0;
}
#endif
/****************************************************************************
* Name: stm32_spi1cmddata
*
* Description:
* Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
* or command (false). This function must be provided by platform-specific
* logic. This is an implementation of the cmddata method of the SPI
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
*
* Input Parameters:
*
* spi - SPI device that controls the bus the device that requires the CMD/
* DATA selection.
* devid - If there are multiple devices on the bus, this selects which one
* to select cmd or data. NOTE: This design restricts, for example,
* one one SPI display per SPI bus.
* cmd - true: select command; false: select data
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_SPI_CMDDATA
#ifdef CONFIG_STM32_SPI1
int stm32_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
{
return -ENODEV;
}
#endif
#ifdef CONFIG_STM32_SPI2
int stm32_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
{
return OK;
}
#endif
#ifdef CONFIG_STM32_SPI3
int stm32_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
{
return OK;
}
#endif
#endif /* CONFIG_SPI_CMDDATA */
#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */

155
configs/spark/src/up_userleds.c Normal file
View File

@ -0,0 +1,155 @@
/****************************************************************************
* configs/spark/src/up_leds.c
*
* Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/power/pm.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32.h"
#include "spark.h"
#ifndef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/* This array maps an LED number to GPIO pin configuration */
static uint32_t g_ledcfg[BOARD_NLEDS] =
{
GPIO_LED1, GPIO_LED2, GPIO_LED3, GPIO_LED4
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
void up_ledinit(void)
{
/* Configure LED1-4 GPIOs for output */
stm32_configgpio(GPIO_LED1);
stm32_configgpio(GPIO_LED2);
stm32_configgpio(GPIO_LED3);
stm32_configgpio(GPIO_LED4);
}
/****************************************************************************
* Name: up_setled
****************************************************************************/
void up_setled(int led, bool ledon)
{
if ((unsigned)led < BOARD_NLEDS)
{
bool active_low = (LED_ACTIVE_LOW & (1 << ledon)) != 0;
stm32_gpiowrite(g_ledcfg[led], active_low ? !ledon : ledon);
}
}
/****************************************************************************
* Name: up_setleds
* Description:
* This function will be called to set the state of the Leds on the board
*
* Paramaters:
* ledset: is a bit set of 1s for the LEDs to effect
* led_states_set: a bit set of 1 for on 0 for off
* N.B. The led_states_set terms are in true logic, the led polarity is
* dealt herein
*
****************************************************************************/
void up_setleds(uint8_t ledset, uint8_t led_states_set)
{
led_states_set ^= LED_ACTIVE_LOW;
if ((ledset & BOARD_USR_LED_BIT) == 0)
{
stm32_gpiowrite(GPIO_LED1, (led_states_set & BOARD_USR_LED_BIT) == 0);
}
if ((ledset & BOARD_RED_LED_BIT) == 0)
{
stm32_gpiowrite(GPIO_LED2, (led_states_set & BOARD_RED_LED_BIT) == 0);
}
if ((ledset & BOARD_BLUE_LED_BIT) == 0)
{
stm32_gpiowrite(GPIO_LED3, (led_states_set & BOARD_BLUE_LED_BIT) == 0);
}
if ((ledset & BOARD_GREEN_LED_BIT) == 0)
{
stm32_gpiowrite(GPIO_LED4, (led_states_set & BOARD_GREEN_LED_BIT) == 0);
}
}
#endif /* !CONFIG_ARCH_LEDS */

350
configs/spark/src/up_wireless.c Normal file
View File

@ -0,0 +1,350 @@
/************************************************************************************
* configs/spark/src/up_wireless.c
*
* Copyright (C) 2009, 2013 Gregory Nutt. All rights reserved.
* Author: Laurent Latil <laurent@latil.nom.fr>
* David Sidrane <david_s5@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/irq.h>
#include <nuttx/spi/spi.h>
#include <nuttx/wireless/wireless.h>
#include <nuttx/wireless/cc3000.h>
#include <nuttx/wireless/cc3000/include/cc3000_upif.h>
#include "stm32.h"
#include "spark.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifdef CONFIG_WL_CC3000
#ifndef CONFIG_WIRELESS
# error "Wireless support requires CONFIG_WIRELESS"
#endif
#ifndef CONFIG_STM32_SPI2
# error "CC3000 Wireless support requires CONFIG_STM32_SPI2"
#endif
#ifndef CC3000_SPI_FREQUENCY
# define CC3000_SPI_FREQUENCY 16000000
#endif
#ifndef CC3000_SPIDEV
# define CC3000_SPIDEV 2
#endif
#if CC3000_SPIDEV != 2
# error "CC3000_SPIDEV must be 2"
#endif
#ifndef CC3000_DEVMINOR
# define CC3000_DEVMINOR 0
#endif
/****************************************************************************
* Private Types
****************************************************************************/
struct stm32_config_s
{
struct cc3000_config_s dev;
xcpt_t handler;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* IRQ/GPIO access callbacks. These operations all hidden behind callbacks
* to isolate the CC3000 driver from differences in GPIO interrupt handling
* by varying boards and MCUs. If possible, interrupts should be configured
* on falling edges to detect the Ready Condition At T2: The normal master
* SPI write sequence is SPI_CS low, followed by SPI_IRQ low CC3000 to host,
* indicating that the CC3000 core module is ready to accept data. T2
* duration is approximately 7 ms.
*
* irq_attach - Attach the CC3000 interrupt handler to the GPIO interrupt
* irq_enable - Enable or disable the GPIO interrupt
* clear_irq - Acknowledge/clear any pending GPIO interrupt
* power_enable - Enable or disable Module enable.
* chip_select - The Chip Select
* busy - Return the state of the interrupt GPIO input
*/
static int wl_attach_irq(FAR struct cc3000_config_s *state, xcpt_t handler);
static void wl_enable_irq(FAR struct cc3000_config_s *state, bool enable);
static void wl_clear_irq(FAR struct cc3000_config_s *state);
static void wl_select(FAR struct cc3000_config_s *state, bool enable);
static void wl_enable_power(FAR struct cc3000_config_s *state, bool enable);
static bool wl_busy(FAR struct cc3000_config_s *state);
/****************************************************************************
* Private Data
****************************************************************************/
/* A reference to a structure of this type must be passed to the CC3000
* driver. This structure provides information about the configuration
* of the CC3000 and provides some board-specific hooks.
*
* Memory for this structure is provided by the caller. It is not copied
* by the driver and is presumed to persist while the driver is active. The
* memory must be writable because, under certain circumstances, the driver
* may modify frequency or X plate resistance values.
*/
static struct stm32_config_s g_cc3000_info =
{
.dev.spi_frequency = CONFIG_CC3000_SPI_FREQUENCY,
.dev.spi_mode = CONFIG_CC3000_SPI_MODE,
.dev.irq_attach = wl_attach_irq,
.dev.irq_enable = wl_enable_irq,
.dev.irq_clear = wl_clear_irq,
.dev.power_enable = wl_enable_power,
.dev.chip_select = wl_select,
.dev.busy = wl_busy,
.handler = NULL,
};
/****************************************************************************
* Private Functions
****************************************************************************/
/* IRQ/GPIO access callbacks. These operations all hidden behind
* callbacks to isolate the CC3000 driver from differences in GPIO
* interrupt handling by varying boards and MCUs. If possible,
* interrupts should be configured on both rising and falling edges
* so that contact and loss-of-contact events can be detected.
*
* attach - Attach the CC3000 interrupt handler to the GPIO interrupt
* enable - Enable or disable the GPIO interrupt
* clear - Acknowledge/clear any pending GPIO interrupt
* pendown - Return the state of the pen down GPIO input
*/
static int wl_attach_irq(FAR struct cc3000_config_s *state, xcpt_t handler)
{
FAR struct stm32_config_s *priv = (FAR struct stm32_config_s *)state;
/* Just save the handler for use when the interrupt is enabled */
priv->handler = handler;
return OK;
}
static void wl_enable_irq(FAR struct cc3000_config_s *state, bool enable)
{
FAR struct stm32_config_s *priv = (FAR struct stm32_config_s *)state;
/* The caller should not attempt to enable interrupts if the handler
* has not yet been 'attached'
*/
DEBUGASSERT(priv->handler || !enable);
/* Attach and enable, or detach and disable */
ivdbg("enable:%d\n", enable);
if (enable)
{
(void)stm32_gpiosetevent(GPIO_WIFI_INT, true, true, false, priv->handler);
}
else
{
(void)stm32_gpiosetevent(GPIO_WIFI_INT, false, false, false, NULL);
}
}
static void wl_enable_power(FAR struct cc3000_config_s *state, bool enable)
{
ivdbg("enable:%d\n", enable);
/* Active high enable */
stm32_gpiowrite(GPIO_WIFI_EN, enable);
}
static void wl_select(FAR struct cc3000_config_s *state, bool enable)
{
ivdbg("enable:%d\n", enable);
/* Active high enable */
stm32_gpiowrite(GPIO_WIFI_CS, enable);
}
static void wl_clear_irq(FAR struct cc3000_config_s *state)
{
/* Does nothing */
}
static bool wl_busy(FAR struct cc3000_config_s *state)
{
return stm32_gpioread(GPIO_WIFI_INT);
}
static long read_IRQ(void)
{
static long state = 0; /* Start as a 0 */
state ^= 1;
return state;
}
void enable_nop(void)
{
}
void disable_nop(void)
{
}
void power_nop(unsigned char en)
{
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: arch_wlinitialize
*
* Description:
* Each board that supports a wireless device must provide this function.
* This function is called by application-specific, setup logic to
* configure the wireless device. This function will register the driver
* as /dev/wirelessN where N is the minor device number.
*
* Input Parameters:
* minor - The input device minor number
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int up_wlinitialize(int minor)
{
FAR struct spi_dev_s *spi;
/* Init SPI bus */
idbg("minor %d\n", minor);
DEBUGASSERT(minor == 0);
/* Get an instance of the SPI interface */
spi = up_spiinitialize(CONFIG_CC3000_SPIDEV);
if (!spi)
{
idbg("Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
return -ENODEV;
}
/* Initialize and register the SPI CC3000 device */
int ret = CC3000_register(spi, &g_cc3000_info.dev, CONFIG_CC3000_DEVMINOR);
if (ret < 0)
{
idbg("Failed to initialize SPI bus %d\n", CONFIG_CC3000_SPIDEV);
return -ENODEV;
}
return OK;
}
/*****************************************************************************
* Name: C3000_wlan_init
*
* Description:
* Initialize wlan driver
*
* Warning: This function must be called before ANY other wlan driver
* function
*
* Input Parmeters:
* sWlanCB Asynchronous events callback.
* 0 no event call back.
* - Call back parameters:
* 1) event_type: HCI_EVNT_WLAN_UNSOL_CONNECT connect event,
* HCI_EVNT_WLAN_UNSOL_DISCONNECT disconnect event,
* HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE config done,
* HCI_EVNT_WLAN_UNSOL_DHCP dhcp report,
* HCI_EVNT_WLAN_ASYNC_PING_REPORT ping report OR
* HCI_EVNT_WLAN_KEEPALIVE keepalive.
* 2) data: pointer to extra data that received by the event
* (NULL no data).
* 3) length: data length.
* - Events with extra data:
* HCI_EVNT_WLAN_UNSOL_DHCP: 4 bytes IP, 4 bytes Mask,
* 4 bytes default gateway, 4 bytes DHCP server and 4 bytes
* for DNS server.
* HCI_EVNT_WLAN_ASYNC_PING_REPORT: 4 bytes Packets sent,
* 4 bytes Packets received, 4 bytes Min round time,
* 4 bytes Max round time and 4 bytes for Avg round time.
*
* sFWPatches 0 no patch or pointer to FW patches
* sDriverPatches 0 no patch or pointer to driver patches
* sBootLoaderPatches 0 no patch or pointer to bootloader patches
*
* Returned Value:
* None
*
****************************************************************************/
void CC3000_wlan_init(tWlanCB sWlanCB, tFWPatches sFWPatches, tDriverPatches
sDriverPatches, tBootLoaderPatches sBootLoaderPatches)
{
wlan_init(sWlanCB,
sFWPatches, sDriverPatches, sBootLoaderPatches,
read_IRQ,
enable_nop,
disable_nop,
power_nop);
}
#endif /* CONFIG_WL_CC3000 */