board/stm32f401rc-rs485: Add support to MAX7219 8x8 LED Matrix

Signed-off-by: Rodrigo Sim rcsim10@gmail.com

Documentation/platforms/arm/stm32f4/boards/stm32f401rc-rs485/index.rst

@@ -632,3 +632,35 @@ Now you will be able to access the Device Configuration over Telnet::
        help, ?   - show help
        reset     - reset the board
        exit      - exit shell
+
+max7219
+-------
+
+Configures the NuttShell (nsh) over USB Serial (check usbserial configuration) and enables LCD driver with
+MAX7219 for 8x8 LED matrix::
+
+       NuttShell (NSH) NuttX-12.5.1                                      
+       nsh> 
+       nsh> nxhello
+       nxhello_main: NX handle=0x20005420
+       nxhello_main: Set background color=0
+       nxhello_listener: Connected
+       nxhello_main: Screen resolution (32,8)
+       nxhello_hello: Position (3,0)
+       nxhello_main: Disconnect from the server
+       nsh>
+
+
+======= ====
+MAX7219 PINS
+======= ====
+CS      PC4
+DIN     PA7
+Clk     PA5
+======= ====
+
+As this LED matrix can be combined either horizontally or vetically,
+you can configure this using menuconfig::
+
+       Number of 8x8 LEDs matrices in the horizontal (width)
+       Number of 8x8 LEDs matrices in the vertical (height)

boards/arm/stm32/common/include/stm32_max7219_matrix.h

@@ -0,0 +1,79 @@
+/****************************************************************************
+ * boards/arm/stm32/common/include/stm32_max7219_matrix.h
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_STM32_COMMON_INCLUDE_STM32_MAX7219_H
+#define __BOARDS_ARM_STM32_COMMON_INCLUDE_STM32_MAX7219_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C"
+{
+#else
+#define EXTERN extern
+#endif
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_max7219_matrix_initialize
+ *
+ * Description:
+ *   Initialize and register the MAX7219 Matrix.
+ *
+ * Input Parameters:
+ *   busno - The SPI bus number
+ *
+ * Returned Value:
+ *   Zero (OK) on success; a negated errno value on failure.
+ *
+ ****************************************************************************/
+
+int board_max7219_matrix_initialize(int busno);
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __BOARDS_ARM_STM32_COMMON_INCLUDE_STM32_MAX7219_H */

boards/arm/stm32/common/src/CMakeLists.txt

@@ -116,6 +116,10 @@ if(CONFIG_SENSORS_MAX31855)
   list(APPEND SRCS stm32_max31855.c)
 endif()
 
+if(CONFIG_LCD_MAX7219)
+  list(APPEND SRCS stm32_max7219_matrix.c)
+endif()
+
 if(CONFIG_LIS3DSH)
   list(APPEND SRCS stm32_lis3dsh.c)
 endif()

boards/arm/stm32/common/src/Make.defs

@@ -124,6 +124,10 @@ ifeq ($(CONFIG_SENSORS_MAX31855),y)
   CSRCS += stm32_max31855.c
 endif
 
+ifeq ($(CONFIG_LCD_MAX7219),y)
+  CSRCS += stm32_max7219_matrix.c
+endif
+
 ifeq ($(CONFIG_LIS3DSH),y)
   CSRCS += stm32_lis3dsh.c
 endif

boards/arm/stm32/common/src/stm32_max7219_matrix.c

@@ -0,0 +1,118 @@
+/****************************************************************************
+ * boards/arm/stm32/common/src/stm32_max7219_matrix.c
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <stdbool.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/board.h>
+#include <nuttx/spi/spi.h>
+#include <nuttx/lcd/lcd.h>
+#include <nuttx/lcd/max7219.h>
+
+#include "stm32_gpio.h"
+#include "stm32_spi.h"
+
+#ifndef CONFIG_NX_LCDDRIVER
+#  error "You need to enable CONFIG_NX_LCDDRIVER to use MAX7219 Matrix"
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#ifndef CONFIG_LCD_CONTRAST
+#  define CONFIG_LCD_CONTRAST 60
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+struct spi_dev_s *g_spidev;
+struct lcd_dev_s *g_lcddev;
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_max7219_matrix_initialize
+ ****************************************************************************/
+
+int board_max7219_matrix_initialize(int busno)
+{
+  g_spidev = stm32_spibus_initialize(busno);
+
+  if (g_spidev == NULL)
+    {
+      lcderr("ERROR: Failed to initialize SPI port %d\n", busno);
+      return -ENODEV;
+    }
+
+  return OK;
+}
+
+/****************************************************************************
+ * Name: board_lcd_initialize
+ ****************************************************************************/
+
+int board_lcd_initialize(void)
+{
+  return OK;
+}
+
+/****************************************************************************
+ * Name: board_lcd_getdev
+ ****************************************************************************/
+
+struct lcd_dev_s *board_lcd_getdev(int lcddev)
+{
+  g_lcddev = max7219_initialize(g_spidev, lcddev);
+  if (!g_lcddev)
+    {
+      lcderr("ERROR: Failed to bind SPI port 1 to LCD %d\n", lcddev);
+    }
+  else
+    {
+      lcdinfo("SPI port 1 bound to LCD %d\n", lcddev);
+
+      return g_lcddev;
+    }
+
+  return NULL;
+}
+
+/****************************************************************************
+ * Name: board_lcd_uninitialize
+ ****************************************************************************/
+
+void board_lcd_uninitialize(void)
+{
+  /* TO-FIX */
+}

boards/arm/stm32/stm32f401rc-rs485/configs/max7219/defconfig

@@ -0,0 +1,74 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_FPU is not set
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NX_DISABLE_1BPP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="stm32f401rc-rs485"
+CONFIG_ARCH_BOARD_COMMON=y
+CONFIG_ARCH_BOARD_STM32F401RC_RS485=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F401RC=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_IRQBUTTONS=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_BOARDCTL_USBDEVCTRL=y
+CONFIG_BOARD_LOOPSPERMSEC=8499
+CONFIG_BUILTIN=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_CONSOLE=y
+CONFIG_EXAMPLES_BUTTONS=y
+CONFIG_EXAMPLES_BUTTONS_NAME0="SW3"
+CONFIG_EXAMPLES_BUTTONS_NAME1="SW4"
+CONFIG_EXAMPLES_BUTTONS_NAME2="SW5"
+CONFIG_EXAMPLES_BUTTONS_NAMES=y
+CONFIG_EXAMPLES_BUTTONS_QTD=3
+CONFIG_EXAMPLES_NXHELLO=y
+CONFIG_EXAMPLES_NXHELLO_BPP=1
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INPUT=y
+CONFIG_INPUT_BUTTONS=y
+CONFIG_INPUT_BUTTONS_LOWER=y
+CONFIG_INTELHEX_BINARY=y
+CONFIG_LCD=y
+CONFIG_LCD_FRAMEBUFFER=y
+CONFIG_LCD_MAX7219=y
+CONFIG_LCD_NOGETRUN=y
+CONFIG_MQ_MAXMSGSIZE=64
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_NX=y
+CONFIG_NXFONT_MONO5X8=y
+CONFIG_NX_BLOCKING=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=98304
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_START_DAY=5
+CONFIG_START_MONTH=5
+CONFIG_START_YEAR=2014
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_OTGFS=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_USART6=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USBDEV=y

boards/arm/stm32/stm32f401rc-rs485/include/board.h

@@ -335,6 +335,11 @@ extern "C"
 #define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_1
 #define GPIO_SPI2_SCK    GPIO_SPI2_SCK_2
 
+/* MAX7219 */
+
+#define STM32_LCD_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                           GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN4)
+
 /* LEDs
  *
  * The STM32F401RC-RS485 boards provide 4 blue user LEDs. LD1, LD2, LD3

boards/arm/stm32/stm32f401rc-rs485/src/stm32_bringup.c

@@ -63,6 +63,10 @@
 #include "stm32_hcsr04.h"
 #endif
 
+#ifdef CONFIG_LCD_MAX7219
+#include "stm32_max7219_matrix.h"
+#endif
+
 #ifdef CONFIG_STEPPER_DRV8825
 #include "stm32_drv8266.h"
 #endif
@@ -205,6 +209,17 @@ int stm32_bringup(void)
     }
 #endif
 
+#ifdef CONFIG_LCD_MAX7219
+  /* Configure and initialize the MAX7219 driver */
+
+  ret = board_max7219_matrix_initialize(1);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, \
+       "ERROR: board_max7219_matrix_initialize failed: %d\n", ret);
+    }
+#endif
+
 #ifdef CONFIG_VIDEO_FB
   /* Initialize and register the framebuffer driver */
 

boards/arm/stm32/stm32f401rc-rs485/src/stm32_spi.c

@@ -55,9 +55,13 @@
 
 void weak_function stm32_spidev_initialize(void)
 {
-#ifdef CONFIG_STM32_SPI1
+#ifdef CONFIG_LCD_SSD1306
   stm32_configgpio(GPIO_OLED_CS);    /* OLED chip select */
 #endif
+
+#ifdef CONFIG_LCD_MAX7219
+  stm32_configgpio(STM32_LCD_CS);    /* MAX7219 chip select */
+#endif
 }
 
 /****************************************************************************
@@ -93,8 +97,20 @@ void stm32_spi1select(struct spi_dev_s *dev,
   spiinfo("devid: %d CS: %s\n",
           (int)devid, selected ? "assert" : "de-assert");
 
+  #ifdef CONFIG_LCD_SSD1306
+  if (devid == SPIDEV_DISPLAY(0))
+    {
       stm32_gpiowrite(GPIO_OLED_CS, !selected);
     }
+  #endif
+
+  #ifdef CONFIG_LCD_MAX7219
+  if (devid == SPIDEV_DISPLAY(0))
+    {
+      stm32_gpiowrite(STM32_LCD_CS, !selected);
+    }
+  #endif
+}
 
 uint8_t stm32_spi1status(struct spi_dev_s *dev, uint32_t devid)
 {