Update to apps/build

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3391 42af7a65-404d-4744-a932-0658087f49c3

configs/README.txt

@@ -58,12 +58,17 @@ following characteristics:
         |-- <config1-dir>
 	|   |-- Make.defs
 	|   |-- defconfig
+	|   |-- appconfig*
 	|   `-- setenv.sh
         |-- <config2-dir>
 	|   |-- Make.defs
 	|   |-- defconfig
+	|   |-- appconfig*
 	|   `-- setenv.sh
 	...
+
+  *optional
+
 Summary of Files
 ^^^^^^^^^^^^^^^^
 
@@ -913,6 +918,10 @@ defconfig -- This is a configuration file similar to the Linux
 		CONFIG_HEAP_BASE - The beginning of the heap
 		CONFIG_HEAP_SIZE - The size of the heap
 
+appconfig -- This is another configuration file that is specific to the
+  application.  This file is copied into the application build directory
+  when NuttX is configured.  See ../apps/README.txt for further details.
+
 setenv.sh -- This is a script that you can include that will be installed at
   the toplevel of the directory structure and can be sourced to set any
   necessary environment variables.
@@ -1098,9 +1107,24 @@ Configuring NuttX requires only copying
   configs/<board-name>/<config-dir>/setenv.sh to ${TOPDIR}/setenv.sh
   configs/<board-name>/<config-dir>/defconfig to ${TOPDIR}/.config
 
+And if configs/<board-name>/<config-dir>/appconfig exists in the board
+configuration directory:
+
+  Copy configs/<board-name>/<config-dir>/appconfig to <app-dir>/.config
+  echo "CONFIG_BUILTIN_APPS=y" >> "${TOPDIR}/.config"
+  echo "APPS_LOC=\"<app-dir>\"" >> "${TOPDIR}/.config"
+
 tools/configure.sh
   There is a script that automates these steps.  The following steps will
   accomplish the same configuration:
 
   cd tools
   ./configure.sh <board-name>/<config-dir>
+
+And if configs/<board-name>/<config-dir>/appconfig exists and your
+application directory is not in the standard loction (../apps), then
+you should also specify the location of the application directory on the
+command line like:
+  
+  cd tools
+  ./configure.sh -a <app-dir> <board-name>/<config-dir>

configs/vsn/nsh/appconfig

@@ -0,0 +1,40 @@
+############################################################################
+# configs/vsn/nsh/defconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Copyright (c) 2011 Uros Platise. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#           Uros Platise <uros.platise@isotel.eu>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Add the list of built-in apps needed by this configuration
+
+CONFIGURED_APPS += hello/.built_always poweroff/.built_always jvm/.built_always

configs/vsn/nsh/defconfig

@@ -139,6 +139,18 @@ CONFIG_STM32_TIM8=n
 CONFIG_STM32_USART1=y
 CONFIG_STM32_ADC3=n
 
+#
+# STM32 JTAG Options
+#
+# CONFIG_STM32_JTAG_FULL_ENABLE -- Full JTAG Enable (Parallel and Serial)
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE -- Full but without the JNTRST pin
+# CONFIG_STM32_JTAG_SW_ENABLE - Serial (SWJ) dual pin only which, can
+#   coexist besides the FRAM on SPI3
+#
+CONFIG_STM32_JTAG_FULL_ENABLE=n
+CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
+CONFIG_STM32_JTAG_SW_ENABLE=n
+
 #
 # STM32F103Z specific serial device driver settings
 #
@@ -357,7 +369,7 @@ CONFIG_SCHED_WORKPRIORITY=50
 CONFIG_SCHED_WORKPERIOD=(50*1000)
 CONFIG_SCHED_WORKSTACKSIZE=1024
 CONFIG_SIG_SIGWORK=4
-
+CONFIG_SCHED_WAITPID=y
 #
 # The following can be used to disable categories of
 # APIs supported by the OS.  If the compiler supports
@@ -725,6 +737,7 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
 # CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
 # CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
 #
+CONFIG_EXAMPLES_NSH_BUILTIN_APPS=y
 CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
 CONFIG_EXAMPLES_NSH_STRERROR=n
 CONFIG_EXAMPLES_NSH_LINELEN=64
@@ -816,52 +829,3 @@ CONFIG_PTHREAD_STACK_MIN=256
 CONFIG_PTHREAD_STACK_DEFAULT=2048
 CONFIG_HEAP_BASE=
 CONFIG_HEAP_SIZE=
-
-
-########################################################################
-# STM32 JTAG Options
-#
-# Full JTAG Enable (Parallel and Serial)
-CONFIG_STM32_JTAG_FULL_ENABLE=n
-
-# Full but without the JNTRST pin
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-
-# Serial (SWJ) dual pin only which, can coexist besides the FRAM on SPI3
-CONFIG_STM32_JTAG_SW_ENABLE=n
-
-
-########################################################################
-#
-# Applications to be included within the NuttX binary as described
-# under the ../apps/README.txt
-#
-# Set thi config parameter above to: CONFIG_TASK_NAME_SIZE=16
-# In order to enable argv[0]=<task name> argument set the option
-# CONFIG_TASK_NAME_SIZE=16
-#
-# Include builtin NuttX applications (general option)
-CONFIG_BUILTIN_APPS_NUTTX=y
-
-# Invoke the following application after NuttX starts
-#CONFIG_BUILTIN_APP_START="hello"
-
-# Individual selection of built-in applications:
-
-# Hello world provide a simple skeleton/demo application
-CONFIG_BUILTIN_APPS_HELLO=y
-
-# Provide poweroff command to switch off the board
-CONFIG_BUILTIN_APPS_POWEROFF=y
-
-# Provide JAVA Virtual Machine (the Darjeeling JVM)
-CONFIG_BUILTIN_APPS_JVM=n
-
-# CONFIG_EXAMPLES_NSH_BUILTIN_APPS - Enable invocation of all builtin 
-#   apps from nsh command line. See apps/README for more information.
-#
-CONFIG_EXAMPLES_NSH_BUILTIN_APPS=y
-  CONFIG_SCHED_WAITPID=y
-
-#
-########################################################################