boards/stm32f4discovery: add nxscope CDCACM example

boards/arm/stm32/stm32f4discovery/configs/nxscope_cdcacm/defconfig

@@ -0,0 +1,61 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_FPU is not set
+# CONFIG_DEV_CONSOLE is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="stm32f4discovery"
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F407VG=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARDCTL_MKRD=y
+CONFIG_BOARDCTL_USBDEVCTRL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BUILTIN=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_RXBUFSIZE=256
+CONFIG_CDCACM_TXBUFSIZE=2048
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_EXAMPLES_NXSCOPE=y
+CONFIG_EXAMPLES_NXSCOPE_CDCACM=y
+CONFIG_EXAMPLES_NXSCOPE_SERIAL_PATH="/dev/ttyACM0"
+CONFIG_FS_PROCFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_INIT_ENTRYPOINT="nxscope_main"
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_INTELHEX_BINARY=y
+CONFIG_LOGGING_NXSCOPE=y
+CONFIG_LOGGING_NXSCOPE_ACKFRAMES=y
+CONFIG_LOGGING_NXSCOPE_DIVIDER=y
+CONFIG_LOGGING_NXSCOPE_INTF_SERIAL=y
+CONFIG_MM_REGIONS=2
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAMLOG=y
+CONFIG_RAMLOG_BUFSIZE=4096
+CONFIG_RAMLOG_SYSLOG=y
+CONFIG_RAM_SIZE=114688
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=27
+CONFIG_START_YEAR=2013
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_OTGFS=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_USART2=y
+CONFIG_SYSTEM_READLINE=y
+CONFIG_USBDEV=y