sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arch/arm/src/tiva/common/tiva_serial.c: Fix some typos in comments.

Browse Source
This commit is contained in:
Nathan Hartman 2019-08-19 10:57:00 -06:00 committed by Gregory Nutt
parent 33ab25ae14
commit 198723b90d
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/src/tiva/common/tiva_serial.c
View File

@ -915,7 +915,7 @@ static void up_shutdown(struct uart_dev_s *dev)
* Name: up_attach
*
* Description:
* Configure the UART to operation in interrupt driven mode. This method is
* Configure the UART to operate in interrupt driven mode. This method is
* called when the serial port is opened. Normally, this is just after the
* the setup() method is called, however, the serial console may operate in
* a non-interrupt driven mode during the boot phase.
@ -970,7 +970,7 @@ static void up_detach(struct uart_dev_s *dev)
* This is the UART interrupt handler. It will be invoked
* when an interrupt received on the 'irq' It should call
* uart_transmitchars or uart_receivechar to perform the
* appropriate data transfers. The interrupt handling logic\
* appropriate data transfers. The interrupt handling logic
* must be able to map the 'irq' number into the approprite
* uart_dev_s structure in order to call these functions.
*
@ -1175,7 +1175,7 @@ static int up_receive(struct uart_dev_s *dev, uint32_t *status)
rxd = up_serialin(priv, TIVA_UART_DR_OFFSET);
*status = rxd;
/* The lower 8bits of the Rx data is the actual recevied byte */
/* The lower 8bits of the Rx data is the actual received byte */
return rxd & 0xff;
}
@ -1193,7 +1193,7 @@ static void up_rxint(struct uart_dev_s *dev, bool enable)
struct up_dev_s *priv = (struct up_dev_s *)dev->priv;
if (enable)
{
/* Receive an interrupt when their is anything in the Rx FIFO (or an Rx
/* Receive an interrupt when there is anything in the Rx FIFO (or an Rx
* timeout occurs.
*/
@ -1258,13 +1258,13 @@ static void up_txint(struct uart_dev_s *dev, bool enable)
priv->im |= UART_IM_TXIM;
up_serialout(priv, TIVA_UART_IM_OFFSET, priv->im);
/* The serial driver wants an interrupt here, but will not get get
/* The serial driver wants an interrupt here, but will not get
* one unless we "prime the pump." I believe that this is because
* behave like a level interrupt and the Stellaris interrupts behave
* (at least by default) like edge interrupts.
*
* In any event, faking a TX interrupt here solves the problem;
* Call uart_xmitchars() just as would have been done if we recieved
* Call uart_xmitchars() just as would have been done if we received
* the TX interrupt.
*/