diff --git a/ChangeLog b/ChangeLog index bcd80fd735..0d81a7a175 100644 --- a/ChangeLog +++ b/ChangeLog @@ -4511,3 +4511,7 @@ lpc17_sspinitialize(). So they had to be renamed (2013-4-01). * arch/arm/src/lpc17xx/lpc17_ssp.c: Adapted to work the the LPC178x family (2013-4-01). + * arch/arm/src/lpc17xx/lpc17_gpio.c/.h: Separate LPC176x and LPC178x + logic into separate files. The logic is diverging to much to + try to retain common code (2013-4-03). + diff --git a/arch/arm/src/lpc17xx/lpc176x_gpio.c b/arch/arm/src/lpc17xx/lpc176x_gpio.c new file mode 100644 index 0000000000..545b146449 --- /dev/null +++ b/arch/arm/src/lpc17xx/lpc176x_gpio.c @@ -0,0 +1,684 @@ +/**************************************************************************** + * arch/arm/src/lpc17xx/lpc176x_gpio.c + * + * Copyright (C) 2010-2011, 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include +#include +#include + +#include + +#include "up_arch.h" +#include "chip.h" +#include "lpc17_gpio.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Default input pin configuration */ + +#define DEFAULT_INPUT (GPIO_INPUT|GPIO_PULLUP) + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Public Data + ****************************************************************************/ +/* These tables have global scope because they are also used in + * lpc17_gpiodbg.c + */ + +/* We have to remember the configured interrupt setting.. PINs are not + * actually set up to interrupt until the interrupt is enabled. + */ + +#ifdef CONFIG_GPIO_IRQ +uint64_t g_intedge0; +uint64_t g_intedge2; +#endif + +/* FIO register base addresses */ + +const uint32_t g_fiobase[GPIO_NPORTS] = +{ + LPC17_FIO0_BASE, + LPC17_FIO1_BASE, + LPC17_FIO2_BASE, + LPC17_FIO3_BASE, + LPC17_FIO4_BASE +#if GPIO_NPORTS > 5 + , LPC17_FIO5_BASE +#endif +}; + +/* Port 0 and Port 2 can provide a single interrupt for any combination of + * port pins + */ + +const uint32_t g_intbase[GPIO_NPORTS] = +{ + LPC17_GPIOINT0_BASE, + 0, + LPC17_GPIOINT2_BASE, + 0, + 0 +#if GPIO_NPORTS > 5 + , 0 +#endif +}; + +const uint32_t g_lopinsel[GPIO_NPORTS] = +{ + LPC17_PINCONN_PINSEL0, + LPC17_PINCONN_PINSEL2, + LPC17_PINCONN_PINSEL4, + 0, + 0 +#if GPIO_NPORTS > 5 + , 0 +#endif +}; + +const uint32_t g_hipinsel[GPIO_NPORTS] = +{ + LPC17_PINCONN_PINSEL1, + LPC17_PINCONN_PINSEL3, + 0, + LPC17_PINCONN_PINSEL7, + LPC17_PINCONN_PINSEL9 +#if GPIO_NPORTS > 5 + , 0 +#endif +}; + +const uint32_t g_lopinmode[GPIO_NPORTS] = +{ + LPC17_PINCONN_PINMODE0, + LPC17_PINCONN_PINMODE2, + LPC17_PINCONN_PINMODE4, + 0, + 0 +#if GPIO_NPORTS > 5 + , 0 +#endif +}; + +const uint32_t g_hipinmode[GPIO_NPORTS] = +{ + LPC17_PINCONN_PINMODE1, + LPC17_PINCONN_PINMODE3, + 0, + LPC17_PINCONN_PINMODE7, + LPC17_PINCONN_PINMODE9 +#if GPIO_NPORTS > 5 + , 0 +#endif +}; + +const uint32_t g_odmode[GPIO_NPORTS] = +{ + LPC17_PINCONN_ODMODE0, + LPC17_PINCONN_ODMODE1, + LPC17_PINCONN_ODMODE2, + LPC17_PINCONN_ODMODE3, + LPC17_PINCONN_ODMODE4 +#if GPIO_NPORTS > 5 + , 0 +#endif +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc17_pinsel + * + * Description: + * Get the address of the PINSEL register corresponding to this port and + * pin number. + * + ****************************************************************************/ + +static int lpc17_pinsel(unsigned int port, unsigned int pin, unsigned int value) +{ + const uint32_t *table; + uint32_t regaddr; + uint32_t regval; + unsigned int shift; + + /* Which table do we use */ + + if (pin < 16) + { + table = g_lopinsel; + shift = PINCONN_PINSELL_SHIFT(pin); + } + else + { + table = g_hipinsel; + shift = PINCONN_PINSELH_SHIFT(pin); + } + + /* Fetch the PINSEL register address for this port/pin combination */ + + regaddr = table[port]; + if (regaddr != 0) + { + /* Set the requested value in the PINSEL register */ + + regval = getreg32(regaddr); + regval &= ~(PINCONN_PINSEL_MASK << shift); + regval |= (value << shift); + putreg32(regval, regaddr); + return OK; + } + + return -EINVAL; +} + +/**************************************************************************** + * Name: lpc17_pullup + * + * Description: + * Get the address of the PINMODE register corresponding to this port and + * pin number. + * + ****************************************************************************/ + +static int lpc17_pullup(lpc17_pinset_t cfgset, unsigned int port, + unsigned int pin) +{ + const uint32_t *table; + uint32_t regaddr; + uint32_t regval; + uint32_t value; + unsigned int shift; + + switch (cfgset & GPIO_PUMODE_MASK) + { + default: + case GPIO_PULLUP: /* Pull-up resistor enabled */ + value = PINCONN_PINMODE_PU; + break; + + case GPIO_REPEATER: /* Repeater mode enabled */ + value = PINCONN_PINMODE_RM; + break; + + case GPIO_FLOAT: /* Neither pull-up nor -down */ + value = PINCONN_PINMODE_FLOAT; + break; + + case GPIO_PULLDN: /* Pull-down resistor enabled */ + value = PINCONN_PINMODE_PD; + break; + } + + /* Which table do we use */ + + if (pin < 16) + { + table = g_lopinmode; + shift = PINCONN_PINMODEL_SHIFT(pin); + } + else + { + table = g_hipinmode; + shift = PINCONN_PINMODEH_SHIFT(pin); + } + + /* Fetch the PINSEL register address for this port/pin combination */ + + regaddr = table[port]; + if (regaddr != 0) + { + /* Set the requested value in the PINSEL register */ + + regval = getreg32(regaddr); + regval &= ~(PINCONN_PINMODE_MASK << shift); + regval |= (value << shift); + putreg32(regval, regaddr); + return OK; + } + + return -EINVAL; +} + +/**************************************************************************** + * Name: lpc17_setintedge + * + * Description: + * Remember the configured interrupt edge. We can't actually enable the + * the edge interrupts until the called calls IRQ enabled function. + * + ****************************************************************************/ + +#ifdef CONFIG_GPIO_IRQ +static void lpc17_setintedge(unsigned int port, unsigned int pin, + unsigned int value) +{ + uint64_t *intedge; + unsigned int shift; + + /* Which word to we use? */ + + if (port == 0) + { + intedge = &g_intedge0; + } + else if (port == 2) + { + intedge = &g_intedge2; + } + else + { + return; + } + + /* Set the requested value in the PINSEL register */ + + shift = pin << 1; + *intedge &= ~((uint64_t)3 << shift); + *intedge |= ((uint64_t)value << shift); +} +#endif /* CONFIG_GPIO_IRQ */ + +/**************************************************************************** + * Name: lpc17_setopendrain + * + * Description: + * Set the ODMODE register for open drain mode + * + ****************************************************************************/ + +static void lpc17_setopendrain(unsigned int port, unsigned int pin) +{ + uint32_t regaddr; + uint32_t regval; + + regaddr = g_odmode[port]; + regval = getreg32(regaddr); + regval |= (1 << pin); + putreg32(regval, regaddr); +} + +/**************************************************************************** + * Name: lpc17_clropendrain + * + * Description: + * Reset the ODMODE register to disable open drain mode + * + ****************************************************************************/ + +static void lpc17_clropendrain(unsigned int port, unsigned int pin) +{ + uint32_t regaddr; + uint32_t regval; + + regaddr = g_odmode[port]; + regval = getreg32(regaddr); + regval &= ~(1 << pin); + putreg32(regval, regaddr); +} + +/**************************************************************************** + * Name: lpc17_configinput + * + * Description: + * Configure a GPIO inpue pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +static inline int lpc17_configinput(lpc17_pinset_t cfgset, unsigned int port, unsigned int pin) +{ + uint32_t regval; + uint32_t fiobase; + uint32_t intbase; + uint32_t pinmask = (1 << pin); + + /* Set up FIO registers */ + + fiobase = g_fiobase[port]; + + /* Set as input */ + + regval = getreg32(fiobase + LPC17_FIO_DIR_OFFSET); + regval &= ~pinmask; + putreg32(regval, fiobase + LPC17_FIO_DIR_OFFSET); + + /* Set up interrupt registers */ + + intbase = g_intbase[port]; + if (intbase != 0) + { + /* Disable any rising edge interrupts */ + + regval = getreg32(intbase + LPC17_GPIOINT_INTENR_OFFSET); + regval &= ~pinmask; + putreg32(regval, intbase + LPC17_GPIOINT_INTENR_OFFSET); + + /* Disable any falling edge interrupts */ + + regval = getreg32(intbase + LPC17_GPIOINT_INTENF_OFFSET); + regval &= ~pinmask; + putreg32(regval, intbase + LPC17_GPIOINT_INTENF_OFFSET); + + /* Forget about any falling/rising edge interrupt enabled */ + +#ifdef CONFIG_GPIO_IRQ + lpc17_setintedge(port, pin, 0); +#endif + } + + /* Set up PINSEL registers */ + /* Configure as GPIO */ + + lpc17_pinsel(port, pin, PINCONN_PINSEL_GPIO); + + /* Set pull-up mode */ + + lpc17_pullup(cfgset, port, pin); + + /* Open drain only applies to outputs */ + + lpc17_clropendrain(port, pin); + + return OK; +} + +/**************************************************************************** + * Name: lpc17_configinterrupt + * + * Description: + * Configure a GPIO interrupt pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +static inline int lpc17_configinterrupt(lpc17_pinset_t cfgset, unsigned int port, + unsigned int pin) +{ + /* First, configure the port as a generic input so that we have a known + * starting point and consistent behavior during the re-configuration. + */ + + (void)lpc17_configinput(cfgset, port, pin); + + /* Then just remember the rising/falling edge interrupt enabled */ + + DEBUGASSERT(port == 0 || port == 2); +#ifdef CONFIG_GPIO_IRQ + lpc17_setintedge(port, pin, (cfgset & GPIO_EDGE_MASK) >> GPIO_EDGE_SHIFT); +#endif + return OK; +} + +/**************************************************************************** + * Name: lpc17_configoutput + * + * Description: + * Configure a GPIO output pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +static inline int lpc17_configoutput(lpc17_pinset_t cfgset, unsigned int port, + unsigned int pin) +{ + uint32_t fiobase; + uint32_t regval; + + /* First, configure the port as a generic input so that we have a known + * starting point and consistent behavior during the re-configuration. + */ + + (void)lpc17_configinput(DEFAULT_INPUT, port, pin); + + /* Now, reconfigure the pin as an output */ + + fiobase = g_fiobase[port]; + regval = getreg32(fiobase + LPC17_FIO_DIR_OFFSET); + regval |= (1 << pin); + putreg32(regval, fiobase + LPC17_FIO_DIR_OFFSET); + + /* Check for open drain output */ + + if ((cfgset & GPIO_OPEN_DRAIN) != 0) + { + /* Set pull-up mode. This normally only applies to input pins, but does have + * meaning if the port is an open drain output. + */ + + lpc17_pullup(cfgset, port, pin); + + /* Select open drain output */ + + lpc17_setopendrain(port, pin); + } + + /* Set the initial value of the output */ + + lpc17_gpiowrite(cfgset, ((cfgset & GPIO_VALUE) != GPIO_VALUE_ZERO)); + + return OK; +} + +/**************************************************************************** + * Name: lpc17_configalternate + * + * Description: + * Configure a GPIO alternate function pin based on bit-encoded description + * of the pin. + * + ****************************************************************************/ + +static int lpc17_configalternate(lpc17_pinset_t cfgset, unsigned int port, + unsigned int pin, uint32_t alt) +{ + /* First, configure the port as an input so that we have a known + * starting point and consistent behavior during the re-configuration. + */ + + (void)lpc17_configinput(DEFAULT_INPUT, port, pin); + + /* Set up PINSEL registers */ + /* Configure as GPIO */ + + lpc17_pinsel(port, pin, alt); + + /* Set pull-up mode */ + + lpc17_pullup(cfgset, port, pin); + + /* Check for open drain output */ + + if ((cfgset & GPIO_OPEN_DRAIN) != 0) + { + /* Select open drain output */ + + lpc17_setopendrain(port, pin); + } + + return OK; +} + +/**************************************************************************** + * Global Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc17_configgpio + * + * Description: + * Configure a GPIO pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +int lpc17_configgpio(lpc17_pinset_t cfgset) +{ + unsigned int port; + unsigned int pin; + int ret = -EINVAL; + + /* Verify that this hardware supports the select GPIO port */ + + port = (cfgset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + if (port < GPIO_NPORTS) + { + /* Get the pin number and select the port configuration register for that pin */ + + pin = (cfgset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; + + /* Handle according to pin function */ + + switch (cfgset & GPIO_FUNC_MASK) + { + case GPIO_INPUT: /* GPIO input pin */ + ret = lpc17_configinput(cfgset, port, pin); + break; + + case GPIO_INTFE: /* GPIO interrupt falling edge */ + case GPIO_INTRE: /* GPIO interrupt rising edge */ + case GPIO_INTBOTH: /* GPIO interrupt both edges */ + ret = lpc17_configinterrupt(cfgset, port, pin); + break; + + case GPIO_OUTPUT: /* GPIO outpout pin */ + ret = lpc17_configoutput(cfgset, port, pin); + break; + + case GPIO_ALT1: /* Alternate function 1 */ + ret = lpc17_configalternate(cfgset, port, pin, PINCONN_PINSEL_ALT1); + break; + + case GPIO_ALT2: /* Alternate function 2 */ + ret = lpc17_configalternate(cfgset, port, pin, PINCONN_PINSEL_ALT2); + break; + + case GPIO_ALT3: /* Alternate function 3 */ + ret = lpc17_configalternate(cfgset, port, pin, PINCONN_PINSEL_ALT3); + break; + + default: + break; + } + } + + return ret; +} + +/**************************************************************************** + * Name: lpc17_gpiowrite + * + * Description: + * Write one or zero to the selected GPIO pin + * + ****************************************************************************/ + +void lpc17_gpiowrite(lpc17_pinset_t pinset, bool value) +{ + uint32_t fiobase; + uint32_t offset; + unsigned int port; + unsigned int pin; + + port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + if (port < GPIO_NPORTS) + { + /* Get the port base address */ + + fiobase = g_fiobase[port]; + + /* Get the pin number */ + + pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; + + /* Set or clear the output on the pin */ + + if (value) + { + offset = LPC17_FIO_SET_OFFSET; + } + else + { + offset = LPC17_FIO_CLR_OFFSET; + } + + putreg32((1 << pin), fiobase + offset); + } +} + +/**************************************************************************** + * Name: lpc17_gpioread + * + * Description: + * Read one or zero from the selected GPIO pin + * + ****************************************************************************/ + +bool lpc17_gpioread(lpc17_pinset_t pinset) +{ + uint32_t fiobase; + unsigned int port; + unsigned int pin; + + port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + if (port < GPIO_NPORTS) + { + /* Get the port base address */ + + fiobase = g_fiobase[port]; + + /* Get the pin number and return the input state of that pin */ + + pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; + return ((getreg32(fiobase + LPC17_FIO_PIN_OFFSET) & (1 << pin)) != 0); + } + + return false; +} diff --git a/arch/arm/src/lpc17xx/lpc176x_gpio.h b/arch/arm/src/lpc17xx/lpc176x_gpio.h new file mode 100644 index 0000000000..acdd1dcf69 --- /dev/null +++ b/arch/arm/src/lpc17xx/lpc176x_gpio.h @@ -0,0 +1,197 @@ +/************************************************************************************ + * arch/arm/src/lpc17xx/lpc176x_gpio.h + * + * Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC17XX_LPC176X_GPIO_H +#define __ARCH_ARM_SRC_LPC17XX_LPC176X_GPIO_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Bit-encoded input to lpc17_configgpio() ******************************************/ + +/* Encoding: FFFx MMOV PPPN NNNN + * + * Pin Function: FFF + * Pin Mode bits: MM + * Open drain: O (output pins) + * Initial value: V (output pins) + * Port number: PPP (0-4) + * Pin number: NNNNN (0-31) + */ + +/* Pin Function bits: FFF + * Only meaningful when the GPIO function is GPIO_PIN + */ + +#define GPIO_FUNC_SHIFT (13) /* Bits 13-15: GPIO mode */ +#define GPIO_FUNC_MASK (7 << GPIO_FUNC_SHIFT) +# define GPIO_INPUT (0 << GPIO_FUNC_SHIFT) /* 000 GPIO input pin */ +# define GPIO_INTFE (1 << GPIO_FUNC_SHIFT) /* 001 GPIO interrupt falling edge */ +# define GPIO_INTRE (2 << GPIO_FUNC_SHIFT) /* 010 GPIO interrupt rising edge */ +# define GPIO_INTBOTH (3 << GPIO_FUNC_SHIFT) /* 011 GPIO interrupt both edges */ +# define GPIO_OUTPUT (4 << GPIO_FUNC_SHIFT) /* 100 GPIO outpout pin */ +# define GPIO_ALT1 (5 << GPIO_FUNC_SHIFT) /* 101 Alternate function 1 */ +# define GPIO_ALT2 (6 << GPIO_FUNC_SHIFT) /* 110 Alternate function 2 */ +# define GPIO_ALT3 (7 << GPIO_FUNC_SHIFT) /* 111 Alternate function 3 */ + +#define GPIO_EDGE_SHIFT (13) /* Bits 13-14: Interrupt edge bits */ +#define GPIO_EDGE_MASK (3 << GPIO_EDGE_SHIFT) + +#define GPIO_INOUT_MASK GPIO_OUTPUT +#define GPIO_FE_MASK GPIO_INTFE +#define GPIO_RE_MASK GPIO_INTRE + +#define GPIO_ISGPIO(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) <= GPIO_OUTPUT) +#define GPIO_ISALT(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) > GPIO_OUTPUT) +#define GPIO_ISINPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_INPUT) +#define GPIO_ISOUTPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_OUTPUT) +#define GPIO_ISINORINT(ps) (((ps) & GPIO_INOUT_MASK) == 0) +#define GPIO_ISOUTORALT(ps) (((ps) & GPIO_INOUT_MASK) != 0) +#define GPIO_ISINTERRUPT(ps) (GPIO_ISOUTPUT(ps) && !GPIO_ISINPUT(ps)) +#define GPIO_ISFE(ps) (((ps) & GPIO_FE_MASK) != 0) +#define GPIO_ISRE(ps) (((ps) & GPIO_RE_MASK) != 0) + +/* Pin Mode: MM */ + +#define GPIO_PUMODE_SHIFT (10) /* Bits 10-11: Pin pull-up mode */ +#define GPIO_PUMODE_MASK (3 << GPIO_PUMODE_SHIFT) +# define GPIO_PULLUP (0 << GPIO_PUMODE_SHIFT) /* Pull-up resistor enabled */ +# define GPIO_REPEATER (1 << GPIO_PUMODE_SHIFT) /* Repeater mode enabled */ +# define GPIO_FLOAT (2 << GPIO_PUMODE_SHIFT) /* Neither pull-up nor -down */ +# define GPIO_PULLDN (3 << GPIO_PUMODE_SHIFT) /* Pull-down resistor enabled */ + +/* Open drain: O */ + +#define GPIO_OPEN_DRAIN (1 << 9) /* Bit 9: Open drain mode */ + +/* Initial value: V */ + +#define GPIO_VALUE (1 << 8) /* Bit 8: Initial GPIO output value */ +#define GPIO_VALUE_ONE GPIO_VALUE +#define GPIO_VALUE_ZERO (0) + +/* Port number: PPP (0-4) */ + +#define GPIO_PORT_SHIFT (5) /* Bit 5-7: Port number */ +#define GPIO_PORT_MASK (7 << GPIO_PORT_SHIFT) +# define GPIO_PORT0 (0 << GPIO_PORT_SHIFT) +# define GPIO_PORT1 (1 << GPIO_PORT_SHIFT) +# define GPIO_PORT2 (2 << GPIO_PORT_SHIFT) +# define GPIO_PORT3 (3 << GPIO_PORT_SHIFT) +# define GPIO_PORT4 (4 << GPIO_PORT_SHIFT) + +#define GPIO_NPORTS 5 + +/* Pin number: NNNNN (0-31) */ + +#define GPIO_PIN_SHIFT 0 /* Bits 0-4: GPIO number: 0-31 */ +#define GPIO_PIN_MASK (31 << GPIO_PIN_SHIFT) +# define GPIO_PIN0 (0 << GPIO_PIN_SHIFT) +# define GPIO_PIN1 (1 << GPIO_PIN_SHIFT) +# define GPIO_PIN2 (2 << GPIO_PIN_SHIFT) +# define GPIO_PIN3 (3 << GPIO_PIN_SHIFT) +# define GPIO_PIN4 (4 << GPIO_PIN_SHIFT) +# define GPIO_PIN5 (5 << GPIO_PIN_SHIFT) +# define GPIO_PIN6 (6 << GPIO_PIN_SHIFT) +# define GPIO_PIN7 (7 << GPIO_PIN_SHIFT) +# define GPIO_PIN8 (8 << GPIO_PIN_SHIFT) +# define GPIO_PIN9 (9 << GPIO_PIN_SHIFT) +# define GPIO_PIN10 (10 << GPIO_PIN_SHIFT) +# define GPIO_PIN11 (11 << GPIO_PIN_SHIFT) +# define GPIO_PIN12 (12 << GPIO_PIN_SHIFT) +# define GPIO_PIN13 (13 << GPIO_PIN_SHIFT) +# define GPIO_PIN14 (14 << GPIO_PIN_SHIFT) +# define GPIO_PIN15 (15 << GPIO_PIN_SHIFT) +# define GPIO_PIN16 (16 << GPIO_PIN_SHIFT) +# define GPIO_PIN17 (17 << GPIO_PIN_SHIFT) +# define GPIO_PIN18 (18 << GPIO_PIN_SHIFT) +# define GPIO_PIN19 (19 << GPIO_PIN_SHIFT) +# define GPIO_PIN20 (20 << GPIO_PIN_SHIFT) +# define GPIO_PIN21 (21 << GPIO_PIN_SHIFT) +# define GPIO_PIN22 (22 << GPIO_PIN_SHIFT) +# define GPIO_PIN23 (23 << GPIO_PIN_SHIFT) +# define GPIO_PIN24 (24 << GPIO_PIN_SHIFT) +# define GPIO_PIN25 (25 << GPIO_PIN_SHIFT) +# define GPIO_PIN26 (26 << GPIO_PIN_SHIFT) +# define GPIO_PIN27 (27 << GPIO_PIN_SHIFT) +# define GPIO_PIN28 (28 << GPIO_PIN_SHIFT) +# define GPIO_PIN29 (29 << GPIO_PIN_SHIFT) +# define GPIO_PIN30 (30 << GPIO_PIN_SHIFT) +# define GPIO_PIN31 (31 << GPIO_PIN_SHIFT) + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +typedef uint16_t lpc17_pinset_t; + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" +{ +#else +#define EXTERN extern +#endif + +/* These tables have global scope only because they are shared between lpc17_gpio.c, + * lpc17_gpioint.c, and lpc17_gpiodbg.c + */ + +EXTERN const uint32_t g_lopinsel[GPIO_NPORTS]; +EXTERN const uint32_t g_hipinsel[GPIO_NPORTS]; +EXTERN const uint32_t g_lopinmode[GPIO_NPORTS]; +EXTERN const uint32_t g_hipinmode[GPIO_NPORTS]; +EXTERN const uint32_t g_odmode[GPIO_NPORTS]; + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +#ifdef __cplusplus +} +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ARCH_ARM_SRC_LPC17XX_LPC176X_GPIO_H */ diff --git a/arch/arm/src/lpc17xx/lpc178x_gpio.c b/arch/arm/src/lpc17xx/lpc178x_gpio.c new file mode 100644 index 0000000000..544c608a43 --- /dev/null +++ b/arch/arm/src/lpc17xx/lpc178x_gpio.c @@ -0,0 +1,631 @@ +/**************************************************************************** + * arch/arm/src/lpc17xx/lpc178x_gpio.c + * + * Copyright (C) 2010-2011, 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * With LPC178x extensions from Rommel Marcelo + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include +#include +#include + +#include + +#include "up_arch.h" +#include "chip.h" +#include "lpc17_gpio.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Default input pin configuration */ + +#define DEFAULT_INPUT (GPIO_INPUT|GPIO_PULLUP) + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Public Data + ****************************************************************************/ +/* These tables have global scope because they are also used in + * lpc17_gpiodbg.c + */ + +/* We have to remember the configured interrupt setting.. PINs are not + * actually set up to interrupt until the interrupt is enabled. + */ + +#ifdef CONFIG_GPIO_IRQ +uint64_t g_intedge0; +uint64_t g_intedge2; +#endif + +/* FIO register base addresses */ + +const uint32_t g_fiobase[GPIO_NPORTS] = +{ + LPC17_FIO0_BASE, + LPC17_FIO1_BASE, + LPC17_FIO2_BASE, + LPC17_FIO3_BASE, + LPC17_FIO4_BASE +#if GPIO_NPORTS > 5 + , LPC17_FIO5_BASE +#endif +}; + +/* Port 0 and Port 2 can provide a single interrupt for any combination of + * port pins + */ + +const uint32_t g_intbase[GPIO_NPORTS] = +{ + LPC17_GPIOINT0_BASE, + 0, + LPC17_GPIOINT2_BASE, + 0, + 0 +#if GPIO_NPORTS > 5 + , 0 +#endif +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc17_configiocon + * + * Description: + * Set the LPC178x IOCON register + * + * Type D: FUNC, MODE, HYS, INV, SLEW, OD - + * Type A: FUNC, MODE, INV, ADMODE, FILTER, OD, DACEN -P0[12:13,23:26],P1[30:31] + * Type U: FUNC -P0[29:31] + * Type I: FUNC, INV, HS, HIDRIVE -P0[27:28], P5[2:3] + * Type W: FUNC, MODE, HYS, INV, FILTER, SLEW, OD -P0[7:9] + * + ****************************************************************************/ + +static int lpc17_configiocon(unsigned int port, unsigned int pin, + unsigned int value) +{ + uint32_t regaddr; + uint32_t regval; + uint32_t typemask = GPIO_IOCON_TYPE_D_MASK; + + /* Select the mask based on pin usage */ + + switch (port) + { + case 0: + switch (pin) + { + case 7: + case 8: + case 9: + typemask = GPIO_IOCON_TYPE_W_MASK; + break; + + case 12: + case 13: + case 23: + case 24: + case 25: + case 26: + typemask = GPIO_IOCON_TYPE_A_MASK; + break; + + case 27: + case 28: + typemask = GPIO_IOCON_TYPE_I_MASK; + break; + + case 29: + case 30: + case 31: + typemask = GPIO_IOCON_TYPE_U_MASK; + break; + + default: + break; + } + break; + + case 1: + switch (pin) + { + case 30: + case 31: + typemask = GPIO_IOCON_TYPE_A_MASK; + break; + + default: + break; + } + break; + + case 5: + switch (pin) + { + case 2: + case 3: + typemask = GPIO_IOCON_TYPE_I_MASK; + break; + + default: + break; + } + break; + + default: + break; + } + + regaddr = LPC17_IOCON_P(port, pin); + regval = getreg32(regaddr); + regval |= value; + regval &= typemask; + putreg32(regval, regaddr); + + return OK; +} + +/**************************************************************************** + * Name: lpc17_setintedge + * + * Description: + * Remember the configured interrupt edge. We can't actually enable the + * the edge interrupts until the called calls IRQ enabled function. + * + ****************************************************************************/ + +#ifdef CONFIG_GPIO_IRQ +static void lpc17_setintedge(unsigned int port, unsigned int pin, + unsigned int value) +{ + uint64_t *intedge; + unsigned int shift; + + /* Which word to we use? */ + + if (port == 0) + { + intedge = &g_intedge0; + } + else if (port == 2) + { + intedge = &g_intedge2; + } + else + { + return; + } + + /* Set the requested value in the PINSEL register */ + + shift = pin << 1; + *intedge &= ~((uint64_t)3 << shift); + *intedge |= ((uint64_t)value << shift); +} +#endif /* CONFIG_GPIO_IRQ */ + +/**************************************************************************** + * Name: lpc17_configinput + * + * Description: + * Configure a GPIO inpue pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +static inline int lpc17_configinput(lpc17_pinset_t cfgset, unsigned int port, unsigned int pin) +{ + uint32_t regval; + uint32_t fiobase; + uint32_t intbase; + uint32_t pinmask = (1 << pin); + + /* Set up FIO registers */ + + fiobase = g_fiobase[port]; + + /* Set as input */ + + regval = getreg32(fiobase + LPC17_FIO_DIR_OFFSET); + regval &= ~pinmask; + putreg32(regval, fiobase + LPC17_FIO_DIR_OFFSET); + + /* Set up interrupt registers */ + + intbase = g_intbase[port]; + if (intbase != 0) + { + /* Disable any rising edge interrupts */ + + regval = getreg32(intbase + LPC17_GPIOINT_INTENR_OFFSET); + regval &= ~pinmask; + putreg32(regval, intbase + LPC17_GPIOINT_INTENR_OFFSET); + + /* Disable any falling edge interrupts */ + + regval = getreg32(intbase + LPC17_GPIOINT_INTENF_OFFSET); + regval &= ~pinmask; + putreg32(regval, intbase + LPC17_GPIOINT_INTENF_OFFSET); + + /* Forget about any falling/rising edge interrupt enabled */ + +#ifdef CONFIG_GPIO_IRQ + lpc17_setintedge(port, pin, 0); +#endif + } + + /* Set up PINSEL registers */ + /* Configure the pin as a GPIO. Clear opendrain, input inversion, + * hysteris, slew. Set analog pins as digital. + */ + + regval = IOCON_FUNC_GPIO; + + /* Set pull-up mode. Isolate the field from the cfgset and move it + * into the correct position in the register value. + */ + + regval |= (((cfgset & GPIO_PUMODE_MASK) >> GPIO_PUMODE_SHIFT) << IOCON_MODE_SHIFT); + + /* Select input polarity */ + + if ((cfgset & GPIO_INVERT) != 0) + { + regval |= IOCON_INV_MASK; + } + + /* Select hysteresis enable */ + + if ((cfgset & GPIO_HYSTERESIS) != 0) + { + regval |= IOCON_HYS_MASK; + } + + /* Set IOCON register */ + + lpc17_configiocon(port, pin, regval); + + return OK; +} + +/**************************************************************************** + * Name: lpc17_configinterrupt + * + * Description: + * Configure a GPIO interrupt pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +static inline int lpc17_configinterrupt(lpc17_pinset_t cfgset, unsigned int port, + unsigned int pin) +{ + /* First, configure the port as a generic input so that we have a known + * starting point and consistent behavior during the re-configuration. + */ + + (void)lpc17_configinput(cfgset, port, pin); + + /* Then just remember the rising/falling edge interrupt enabled */ + + DEBUGASSERT(port == 0 || port == 2); +#ifdef CONFIG_GPIO_IRQ + lpc17_setintedge(port, pin, (cfgset & GPIO_EDGE_MASK) >> GPIO_EDGE_SHIFT); +#endif + return OK; +} + +/**************************************************************************** + * Name: lpc17_configoutput + * + * Description: + * Configure a GPIO output pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +static inline int lpc17_configoutput(lpc17_pinset_t cfgset, unsigned int port, + unsigned int pin) +{ + uint32_t fiobase; + uint32_t regval; + + /* First, configure the port as a generic input so that we have a known + * starting point and consistent behavior during the re-configuration. + */ + + (void)lpc17_configinput(DEFAULT_INPUT, port, pin); + + /* Now, reconfigure the pin as an output */ + + fiobase = g_fiobase[port]; + regval = getreg32(fiobase + LPC17_FIO_DIR_OFFSET); + regval |= (1 << pin); + putreg32(regval, fiobase + LPC17_FIO_DIR_OFFSET); + + /* Configure the pin as a GPIO. Clear opendrain, input inversion, + * hysteris, slew. Set analog pins as digital. + */ + + regval = IOCON_FUNC_GPIO; + + /* Select open drain output */ + + if ((cfgset & GPIO_OPEN_DRAIN) != 0) + { + regval |= IOCON_OD_MASK; + } + + /* Select slew output */ + + if ((cfgset & GPIO_SLEW) != 0) + { + regval |= IOCON_SLEW_MASK; + } + + /* Set pull-up mode. Isolate the field from the cfgset and move it + * into the correct position in the register value. + */ + + regval |= (((cfgset & GPIO_PUMODE_MASK) >> GPIO_PUMODE_SHIFT) << IOCON_MODE_SHIFT); + + /* Set IOCON register */ + + lpc17_configiocon(port, pin, regval); + + /* Set the initial value of the output */ + + lpc17_gpiowrite(cfgset, ((cfgset & GPIO_VALUE) != GPIO_VALUE_ZERO)); + return OK; +} + +/**************************************************************************** + * Name: lpc17_configalternate + * + * Description: + * Configure a GPIO alternate function pin based on bit-encoded description + * of the pin. + * + ****************************************************************************/ + +static int lpc17_configalternate(lpc17_pinset_t cfgset, unsigned int port, + unsigned int pin, uint32_t alt) +{ + uint32_t regval; + + /* First, configure the port as an input so that we have a known + * starting point and consistent behavior during the re-configuration. + */ + + (void)lpc17_configinput(DEFAULT_INPUT, port, pin); + + /* Select the alternate pin */ + + regval = (alt & IOCON_FUNC_MASK); + + /* Select analog mode */ + + if ((cfgset & GPIO_ADMODE) != 0) + { + regval |= IOCON_ADMODE_MASK; + } + + /* Set pull-up mode. Isolate the field from the cfgset and move it + * into the correct position in the register value. + */ + + regval |= (((cfgset & GPIO_PUMODE_MASK) >> GPIO_PUMODE_SHIFT) << IOCON_MODE_SHIFT); + + /* Select open drain output */ + + if ((cfgset & GPIO_OPEN_DRAIN) != 0) + { + regval |= IOCON_OD_MASK; + } + + /* Set IOCON register */ + + lpc17_configiocon(port, pin, regval); + + return OK; +} + +/**************************************************************************** + * Global Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: lpc17_configgpio + * + * Description: + * Configure a GPIO pin based on bit-encoded description of the pin. + * + ****************************************************************************/ + +int lpc17_configgpio(lpc17_pinset_t cfgset) +{ + unsigned int port; + unsigned int pin; + int ret = -EINVAL; + + /* Verify that this hardware supports the select GPIO port */ + + port = (cfgset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + if (port < GPIO_NPORTS) + { + /* Get the pin number and select the port configuration register for that pin */ + + pin = (cfgset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; + + /* Handle according to pin function */ + + switch (cfgset & GPIO_FUNC_MASK) + { + case GPIO_INPUT: /* GPIO input pin */ + ret = lpc17_configinput(cfgset, port, pin); + break; + + case GPIO_INTFE: /* GPIO interrupt falling edge */ + case GPIO_INTRE: /* GPIO interrupt rising edge */ + case GPIO_INTBOTH: /* GPIO interrupt both edges */ + ret = lpc17_configinterrupt(cfgset, port, pin); + break; + + case GPIO_OUTPUT: /* GPIO outpout pin */ + ret = lpc17_configoutput(cfgset, port, pin); + break; + + case GPIO_ALT1: /* Alternate function 1 */ + ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT1); + break; + + case GPIO_ALT2: /* Alternate function 2 */ + ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT2); + break; + + case GPIO_ALT3: /* Alternate function 3 */ + ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT3); + break; + + case GPIO_ALT4: /* Alternate function 4 */ + ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT4); + break; + + case GPIO_ALT5: /* Alternate function 5 */ + ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT5); + break; + + case GPIO_ALT6: /* Alternate function 6 */ + ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT6); + break; + + case GPIO_ALT7: /* Alternate function 7 */ + ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT7); + break; + + default: + break; + } + } + + return ret; +} + +/**************************************************************************** + * Name: lpc17_gpiowrite + * + * Description: + * Write one or zero to the selected GPIO pin + * + ****************************************************************************/ + +void lpc17_gpiowrite(lpc17_pinset_t pinset, bool value) +{ + uint32_t fiobase; + uint32_t offset; + unsigned int port; + unsigned int pin; + + port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + if (port < GPIO_NPORTS) + { + /* Get the port base address */ + + fiobase = g_fiobase[port]; + + /* Get the pin number */ + + pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; + + /* Set or clear the output on the pin */ + + if (value) + { + offset = LPC17_FIO_SET_OFFSET; + } + else + { + offset = LPC17_FIO_CLR_OFFSET; + } + + putreg32((1 << pin), fiobase + offset); + } +} + +/**************************************************************************** + * Name: lpc17_gpioread + * + * Description: + * Read one or zero from the selected GPIO pin + * + ****************************************************************************/ + +bool lpc17_gpioread(lpc17_pinset_t pinset) +{ + uint32_t fiobase; + unsigned int port; + unsigned int pin; + + port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + if (port < GPIO_NPORTS) + { + /* Get the port base address */ + + fiobase = g_fiobase[port]; + + /* Get the pin number and return the input state of that pin */ + + pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; + return ((getreg32(fiobase + LPC17_FIO_PIN_OFFSET) & (1 << pin)) != 0); + } + + return false; +} diff --git a/arch/arm/src/lpc17xx/lpc178x_gpio.h b/arch/arm/src/lpc17xx/lpc178x_gpio.h new file mode 100644 index 0000000000..842cb569ac --- /dev/null +++ b/arch/arm/src/lpc17xx/lpc178x_gpio.h @@ -0,0 +1,219 @@ +/************************************************************************************ + * arch/arm/src/lpc17xx/lpc178x_gpio.h + * + * Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC17XX_LPC178X_GPIO_H +#define __ARCH_ARM_SRC_LPC17XX_LPC178X_GPIO_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Bit-encoded input to lpc17_configgpio() ******************************************/ + +/* Encoding: TTTT TTTT FFFF MMOV PPPN NNNN + * + * Special Pin Functions: TTTT TTTT + * Pin Function: FFFF + * Pin Mode bits: MM + * Open drain: O (output pins) + * Initial value: V (output pins) + * Port number: PPP (0-4) + * Pin number: NNNNN (0-31) + */ + +/* Special Pin Functions + * For pins that has ADC/DAC, USB, I2C + */ + +#define GPIO_IOCON_TYPE_D_MASK (0x0000067f) /* All port except where ADC/DAC, USB, I2C is present */ +#define GPIO_IOCON_TYPE_A_MASK (0x000105df) /* USB/ADC/DAC P0:12-13, P0:23-26, P1:30-31 */ +#define GPIO_IOCON_TYPE_U_MASK (0x00000007) /* USB P0:29 to 31 */ +#define GPIO_IOCON_TYPE_I_MASK (0x00000347) /* I2C/USB P0:27-28, P5:2-3 */ +#define GPIO_IOCON_TYPE_W_MASK (0x000007ff) /* I2S P0:7-9 */ + +#define GPIO_IOCON_MASK (0x00ff0000) +# define GPIO_HYSTERESIS (1 << 16) /* Bit 16: HYSTERESIS: 0-Disable, 1-Enabled */ +# define GPIO_INVERT (1 << 17) /* Bit 17: Input: 0-Not Inverted, 1-Inverted */ +# define GPIO_SLEW (1 << 18) /* Bit 18: Rate Control: 0-Standard mode, 1-Fast mode */ +# define GPIO_ADMODE (1 << 19) /* Bit 19: A/D Modes: 0-Analog, 1-Digital */ +# define GPIO_FILTER (1 << 20) /* Bit 20: Filter: 0-Off, 1-ON */ +# define GPIO_DACEN (1 << 21) /* Bit 21: DAC: 0-Disabled, 1-Enabled, P0:26 only */ +# define GPIO_I2CHS (1 << 22) /* Bit 22: Filter and Rate Control: 0-Enabled, 1-Disabled */ +# define GPIO_HIDRIVE (1 << 23) /* Bit 23: Current Sink: 0-4mA, 1-20mA P5:2 and P5:3 only,*/ + +/* Pin Function bits: FFFF + * Only meaningful when the GPIO function is GPIO_PIN + */ + +#define GPIO_FUNC_SHIFT (12) /* Bits 12-15: GPIO mode */ +#define GPIO_FUNC_MASK (15 << GPIO_FUNC_SHIFT) +# define GPIO_INPUT (0 << GPIO_FUNC_SHIFT) /* 0000 GPIO input pin */ +# define GPIO_INTFE (1 << GPIO_FUNC_SHIFT) /* 0001 GPIO interrupt falling edge */ +# define GPIO_INTRE (2 << GPIO_FUNC_SHIFT) /* 0010 GPIO interrupt rising edge */ +# define GPIO_INTBOTH (3 << GPIO_FUNC_SHIFT) /* 0011 GPIO interrupt both edges */ +# define GPIO_OUTPUT (4 << GPIO_FUNC_SHIFT) /* 0100 GPIO outpout pin */ +# define GPIO_ALT1 (5 << GPIO_FUNC_SHIFT) /* 0101 Alternate function 1 */ +# define GPIO_ALT2 (6 << GPIO_FUNC_SHIFT) /* 0110 Alternate function 2 */ +# define GPIO_ALT3 (7 << GPIO_FUNC_SHIFT) /* 0111 Alternate function 3 */ +# define GPIO_ALT4 (8 << GPIO_FUNC_SHIFT) /* 1000 Alternate function 4 */ +# define GPIO_ALT5 (9 << GPIO_FUNC_SHIFT) /* 1001 Alternate function 5 */ +# define GPIO_ALT6 (10 << GPIO_FUNC_SHIFT) /* 1010 Alternate function 6 */ +# define GPIO_ALT7 (11 << GPIO_FUNC_SHIFT) /* 1011 Alternate function 7 */ + +#define GPIO_EDGE_SHIFT (12) /* Bits 12-13: Interrupt edge bits */ +#define GPIO_EDGE_MASK (3 << GPIO_EDGE_SHIFT) + +#define GPIO_INOUT_MASK GPIO_OUTPUT +#define GPIO_FE_MASK GPIO_INTFE +#define GPIO_RE_MASK GPIO_INTRE + +#define GPIO_ISGPIO(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) <= GPIO_OUTPUT) +#define GPIO_ISALT(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) > GPIO_OUTPUT) +#define GPIO_ISINPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_INPUT) +#define GPIO_ISOUTPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_OUTPUT) +#define GPIO_ISINORINT(ps) (((ps) & GPIO_INOUT_MASK) == 0) +#define GPIO_ISOUTORALT(ps) (((ps) & GPIO_INOUT_MASK) != 0) +#define GPIO_ISINTERRUPT(ps) (GPIO_ISOUTPUT(ps) && !GPIO_ISINPUT(ps)) +#define GPIO_ISFE(ps) (((ps) & GPIO_FE_MASK) != 0) +#define GPIO_ISRE(ps) (((ps) & GPIO_RE_MASK) != 0) + +/* Pin Mode: MM */ + +#define GPIO_PUMODE_SHIFT (10) /* Bits 10-11: Pin pull-up mode */ +#define GPIO_PUMODE_MASK (3 << GPIO_PUMODE_SHIFT) +# define GPIO_FLOAT (0 << GPIO_PUMODE_SHIFT) /* Neither pull-up nor -down */ +# define GPIO_PULLDN (1 << GPIO_PUMODE_SHIFT) /* Pull-down resistor enabled */ +# define GPIO_PULLUP (2 << GPIO_PUMODE_SHIFT) /* Pull-up resistor enabled */ +# define GPIO_REPEATER (3 << GPIO_PUMODE_SHIFT) /* Repeater mode enabled */ + +/* Open drain: O */ + +#define GPIO_OPEN_DRAIN (1 << 9) /* Bit 9: Open drain mode */ + +/* Initial value: V */ + +#define GPIO_VALUE (1 << 8) /* Bit 8: Initial GPIO output value */ +# define GPIO_VALUE_ONE GPIO_VALUE +# define GPIO_VALUE_ZERO (0) + +/* Port number: PPP (0-5) */ + +#define GPIO_PORT_SHIFT (5) /* Bit 5-7: Port number */ +#define GPIO_PORT_MASK (7 << GPIO_PORT_SHIFT) +# define GPIO_PORT0 (0 << GPIO_PORT_SHIFT) +# define GPIO_PORT1 (1 << GPIO_PORT_SHIFT) +# define GPIO_PORT2 (2 << GPIO_PORT_SHIFT) +# define GPIO_PORT3 (3 << GPIO_PORT_SHIFT) +# define GPIO_PORT4 (4 << GPIO_PORT_SHIFT) +# define GPIO_PORT5 (5 << GPIO_PORT_SHIFT) + +#define GPIO_NPORTS 6 + +/* Pin number: NNNNN (0-31) */ + +#define GPIO_PIN_SHIFT 0 /* Bits 0-4: GPIO number: 0-31 */ +#define GPIO_PIN_MASK (31 << GPIO_PIN_SHIFT) +# define GPIO_PIN0 (0 << GPIO_PIN_SHIFT) +# define GPIO_PIN1 (1 << GPIO_PIN_SHIFT) +# define GPIO_PIN2 (2 << GPIO_PIN_SHIFT) +# define GPIO_PIN3 (3 << GPIO_PIN_SHIFT) +# define GPIO_PIN4 (4 << GPIO_PIN_SHIFT) +# define GPIO_PIN5 (5 << GPIO_PIN_SHIFT) +# define GPIO_PIN6 (6 << GPIO_PIN_SHIFT) +# define GPIO_PIN7 (7 << GPIO_PIN_SHIFT) +# define GPIO_PIN8 (8 << GPIO_PIN_SHIFT) +# define GPIO_PIN9 (9 << GPIO_PIN_SHIFT) +# define GPIO_PIN10 (10 << GPIO_PIN_SHIFT) +# define GPIO_PIN11 (11 << GPIO_PIN_SHIFT) +# define GPIO_PIN12 (12 << GPIO_PIN_SHIFT) +# define GPIO_PIN13 (13 << GPIO_PIN_SHIFT) +# define GPIO_PIN14 (14 << GPIO_PIN_SHIFT) +# define GPIO_PIN15 (15 << GPIO_PIN_SHIFT) +# define GPIO_PIN16 (16 << GPIO_PIN_SHIFT) +# define GPIO_PIN17 (17 << GPIO_PIN_SHIFT) +# define GPIO_PIN18 (18 << GPIO_PIN_SHIFT) +# define GPIO_PIN19 (19 << GPIO_PIN_SHIFT) +# define GPIO_PIN20 (20 << GPIO_PIN_SHIFT) +# define GPIO_PIN21 (21 << GPIO_PIN_SHIFT) +# define GPIO_PIN22 (22 << GPIO_PIN_SHIFT) +# define GPIO_PIN23 (23 << GPIO_PIN_SHIFT) +# define GPIO_PIN24 (24 << GPIO_PIN_SHIFT) +# define GPIO_PIN25 (25 << GPIO_PIN_SHIFT) +# define GPIO_PIN26 (26 << GPIO_PIN_SHIFT) +# define GPIO_PIN27 (27 << GPIO_PIN_SHIFT) +# define GPIO_PIN28 (28 << GPIO_PIN_SHIFT) +# define GPIO_PIN29 (29 << GPIO_PIN_SHIFT) +# define GPIO_PIN30 (30 << GPIO_PIN_SHIFT) +# define GPIO_PIN31 (31 << GPIO_PIN_SHIFT) + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +typedef uint32_t lpc17_pinset_t; + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" +{ +#else +#define EXTERN extern +#endif + +/* These tables have global scope only because they are shared between lpc17_gpio.c, + * lpc17_gpioint.c, and lpc17_gpiodbg.c + */ + +EXTERN const uint32_t g_ioconport[GPIO_NPORTS]; + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +#ifdef __cplusplus +} +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ARCH_ARM_SRC_LPC17XX_LPC178X_GPIO_H */ diff --git a/arch/arm/src/lpc17xx/lpc17_gpio.c b/arch/arm/src/lpc17xx/lpc17_gpio.c index 36b55f8a50..96c89f0e74 100644 --- a/arch/arm/src/lpc17xx/lpc17_gpio.c +++ b/arch/arm/src/lpc17xx/lpc17_gpio.c @@ -40,26 +40,26 @@ #include -#include -#include -#include -#include -#include +/* This file is only a thin shell that includes the correct GPIO logic for + * the selected LPC17xx family. The correct file cannot be selected by the + * make system because it needs the intelligence that only exists in chip.h + * that can associate an LPC17xx part number with an LPC17xx family. + */ -#include +#include -#include "up_arch.h" -#include "chip.h" -#include "lpc17_gpio.h" +#if defined(LPC176x) +# include "lpc176x_gpio.c" +#elif defined(LPC178x) +# include "lpc178x_gpio.c" +#else +# error "Unrecognized LPC17xx family" +#endif /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ -/* Default input pin configuration */ - -#define DEFAULT_INPUT (GPIO_INPUT|GPIO_PULLUP) - /**************************************************************************** * Private Types ****************************************************************************/ @@ -71,853 +71,11 @@ /**************************************************************************** * Public Data ****************************************************************************/ -/* These tables have global scope because they are also used in - * lpc17_gpiodbg.c - */ - -/* We have to remember the configured interrupt setting.. PINs are not - * actually set up to interrupt until the interrupt is enabled. - */ - -#ifdef CONFIG_GPIO_IRQ -uint64_t g_intedge0; -uint64_t g_intedge2; -#endif - -/* FIO register base addresses */ - -const uint32_t g_fiobase[GPIO_NPORTS] = -{ - LPC17_FIO0_BASE, - LPC17_FIO1_BASE, - LPC17_FIO2_BASE, - LPC17_FIO3_BASE, - LPC17_FIO4_BASE -#if GPIO_NPORTS > 5 - , LPC17_FIO5_BASE -#endif -}; - -/* Port 0 and Port 2 can provide a single interrupt for any combination of - * port pins - */ - -const uint32_t g_intbase[GPIO_NPORTS] = -{ - LPC17_GPIOINT0_BASE, - 0, - LPC17_GPIOINT2_BASE, - 0, - 0 -#if GPIO_NPORTS > 5 - , 0 -#endif -}; - -#ifdef LPC176x -const uint32_t g_lopinsel[GPIO_NPORTS] = -{ - LPC17_PINCONN_PINSEL0, - LPC17_PINCONN_PINSEL2, - LPC17_PINCONN_PINSEL4, - 0, - 0 -#if GPIO_NPORTS > 5 - , 0 -#endif -}; - -const uint32_t g_hipinsel[GPIO_NPORTS] = -{ - LPC17_PINCONN_PINSEL1, - LPC17_PINCONN_PINSEL3, - 0, - LPC17_PINCONN_PINSEL7, - LPC17_PINCONN_PINSEL9 -#if GPIO_NPORTS > 5 - , 0 -#endif -}; - -const uint32_t g_lopinmode[GPIO_NPORTS] = -{ - LPC17_PINCONN_PINMODE0, - LPC17_PINCONN_PINMODE2, - LPC17_PINCONN_PINMODE4, - 0, - 0 -#if GPIO_NPORTS > 5 - , 0 -#endif -}; - -const uint32_t g_hipinmode[GPIO_NPORTS] = -{ - LPC17_PINCONN_PINMODE1, - LPC17_PINCONN_PINMODE3, - 0, - LPC17_PINCONN_PINMODE7, - LPC17_PINCONN_PINMODE9 -#if GPIO_NPORTS > 5 - , 0 -#endif -}; - -const uint32_t g_odmode[GPIO_NPORTS] = -{ - LPC17_PINCONN_ODMODE0, - LPC17_PINCONN_ODMODE1, - LPC17_PINCONN_ODMODE2, - LPC17_PINCONN_ODMODE3, - LPC17_PINCONN_ODMODE4 -#if GPIO_NPORTS > 5 - , 0 -#endif -}; -#endif /* LPC176x */ /**************************************************************************** * Private Functions ****************************************************************************/ -/**************************************************************************** - * Name: lpc17_configiocon - * - * Description: - * Set the LPC178x IOCON register - * - * Type D: FUNC, MODE, HYS, INV, SLEW, OD - - * Type A: FUNC, MODE, INV, ADMODE, FILTER, OD, DACEN -P0[12:13,23:26],P1[30:31] - * Type U: FUNC -P0[29:31] - * Type I: FUNC, INV, HS, HIDRIVE -P0[27:28], P5[2:3] - * Type W: FUNC, MODE, HYS, INV, FILTER, SLEW, OD -P0[7:9] - * - ****************************************************************************/ - -#ifdef LPC178x -static int lpc17_configiocon(unsigned int port, unsigned int pin, - unsigned int value) -{ - uint32_t regaddr; - uint32_t regval; - uint32_t typemask = GPIO_IOCON_TYPE_D_MASK; - - /* Select the mask based on pin usage */ - - switch (port) - { - case 0: - switch (pin) - { - case 7: - case 8: - case 9: - typemask = GPIO_IOCON_TYPE_W_MASK; - break; - - case 12: - case 13: - case 23: - case 24: - case 25: - case 26: - typemask = GPIO_IOCON_TYPE_A_MASK; - break; - - case 27: - case 28: - typemask = GPIO_IOCON_TYPE_I_MASK; - break; - - case 29: - case 30: - case 31: - typemask = GPIO_IOCON_TYPE_U_MASK; - break; - - default: - break; - } - break; - - case 1: - switch (pin) - { - case 30: - case 31: - typemask = GPIO_IOCON_TYPE_A_MASK; - break; - - default: - break; - } - break; - - case 5: - switch (pin) - { - case 2: - case 3: - typemask = GPIO_IOCON_TYPE_I_MASK; - break; - - default: - break; - } - break; - - default: - break; - } - - regaddr = LPC17_IOCON_P(port, pin); - regval = getreg32(regaddr); - regval |= value; - regval &= typemask; - putreg32(regval, regaddr); - - return OK; -} -#endif /* LPC178x */ - -/**************************************************************************** - * Name: lpc17_pinsel - * - * Description: - * Get the address of the PINSEL register corresponding to this port and - * pin number. - * - ****************************************************************************/ - -#ifdef LPC176x -static int lpc17_pinsel(unsigned int port, unsigned int pin, unsigned int value) -{ - const uint32_t *table; - uint32_t regaddr; - uint32_t regval; - unsigned int shift; - - /* Which table do we use */ - - if (pin < 16) - { - table = g_lopinsel; - shift = PINCONN_PINSELL_SHIFT(pin); - } - else - { - table = g_hipinsel; - shift = PINCONN_PINSELH_SHIFT(pin); - } - - /* Fetch the PINSEL register address for this port/pin combination */ - - regaddr = table[port]; - if (regaddr != 0) - { - /* Set the requested value in the PINSEL register */ - - regval = getreg32(regaddr); - regval &= ~(PINCONN_PINSEL_MASK << shift); - regval |= (value << shift); - putreg32(regval, regaddr); - return OK; - } - - return -EINVAL; -} - -/**************************************************************************** - * Name: lpc17_pullup - * - * Description: - * Get the address of the PINMODE register corresponding to this port and - * pin number. - * - ****************************************************************************/ - -static int lpc17_pullup(lpc17_pinset_t cfgset, unsigned int port, - unsigned int pin) -{ - const uint32_t *table; - uint32_t regaddr; - uint32_t regval; - uint32_t value; - unsigned int shift; - - switch (cfgset & GPIO_PUMODE_MASK) - { - default: - case GPIO_PULLUP: /* Pull-up resistor enabled */ - value = PINCONN_PINMODE_PU; - break; - - case GPIO_REPEATER: /* Repeater mode enabled */ - value = PINCONN_PINMODE_RM; - break; - - case GPIO_FLOAT: /* Neither pull-up nor -down */ - value = PINCONN_PINMODE_FLOAT; - break; - - case GPIO_PULLDN: /* Pull-down resistor enabled */ - value = PINCONN_PINMODE_PD; - break; - } - - /* Which table do we use */ - - if (pin < 16) - { - table = g_lopinmode; - shift = PINCONN_PINMODEL_SHIFT(pin); - } - else - { - table = g_hipinmode; - shift = PINCONN_PINMODEH_SHIFT(pin); - } - - /* Fetch the PINSEL register address for this port/pin combination */ - - regaddr = table[port]; - if (regaddr != 0) - { - /* Set the requested value in the PINSEL register */ - - regval = getreg32(regaddr); - regval &= ~(PINCONN_PINMODE_MASK << shift); - regval |= (value << shift); - putreg32(regval, regaddr); - return OK; - } - - return -EINVAL; -} -#endif /* LPC176x */ - -/**************************************************************************** - * Name: lpc17_setintedge - * - * Description: - * Remember the configured interrupt edge. We can't actually enable the - * the edge interrupts until the called calls IRQ enabled function. - * - ****************************************************************************/ - -#ifdef CONFIG_GPIO_IRQ -static void lpc17_setintedge(unsigned int port, unsigned int pin, - unsigned int value) -{ - uint64_t *intedge; - unsigned int shift; - - /* Which word to we use? */ - - if (port == 0) - { - intedge = &g_intedge0; - } - else if (port == 2) - { - intedge = &g_intedge2; - } - else - { - return; - } - - /* Set the requested value in the PINSEL register */ - - shift = pin << 1; - *intedge &= ~((uint64_t)3 << shift); - *intedge |= ((uint64_t)value << shift); -} -#endif /* CONFIG_GPIO_IRQ */ - -/**************************************************************************** - * Name: lpc17_setopendrain - * - * Description: - * Set the ODMODE register for open drain mode - * - ****************************************************************************/ - -#ifdef LPC176x -static void lpc17_setopendrain(unsigned int port, unsigned int pin) -{ - uint32_t regaddr; - uint32_t regval; - - regaddr = g_odmode[port]; - regval = getreg32(regaddr); - regval |= (1 << pin); - putreg32(regval, regaddr); -} - -/**************************************************************************** - * Name: lpc17_clropendrain - * - * Description: - * Reset the ODMODE register to disable open drain mode - * - ****************************************************************************/ - -static void lpc17_clropendrain(unsigned int port, unsigned int pin) -{ - uint32_t regaddr; - uint32_t regval; - - regaddr = g_odmode[port]; - regval = getreg32(regaddr); - regval &= ~(1 << pin); - putreg32(regval, regaddr); -} -#endif /* LPC176x */ - -/**************************************************************************** - * Name: lpc17_configinput - * - * Description: - * Configure a GPIO inpue pin based on bit-encoded description of the pin. - * - ****************************************************************************/ - -static inline int lpc17_configinput(lpc17_pinset_t cfgset, unsigned int port, unsigned int pin) -{ - uint32_t regval; - uint32_t fiobase; - uint32_t intbase; - uint32_t pinmask = (1 << pin); - - /* Set up FIO registers */ - - fiobase = g_fiobase[port]; - - /* Set as input */ - - regval = getreg32(fiobase + LPC17_FIO_DIR_OFFSET); - regval &= ~pinmask; - putreg32(regval, fiobase + LPC17_FIO_DIR_OFFSET); - - /* Set up interrupt registers */ - - intbase = g_intbase[port]; - if (intbase != 0) - { - /* Disable any rising edge interrupts */ - - regval = getreg32(intbase + LPC17_GPIOINT_INTENR_OFFSET); - regval &= ~pinmask; - putreg32(regval, intbase + LPC17_GPIOINT_INTENR_OFFSET); - - /* Disable any falling edge interrupts */ - - regval = getreg32(intbase + LPC17_GPIOINT_INTENF_OFFSET); - regval &= ~pinmask; - putreg32(regval, intbase + LPC17_GPIOINT_INTENF_OFFSET); - - /* Forget about any falling/rising edge interrupt enabled */ - -#ifdef CONFIG_GPIO_IRQ - lpc17_setintedge(port, pin, 0); -#endif - } - - /* Set up PINSEL registers */ - /* Configure as GPIO */ - -#if defined(LPC176x) - lpc17_pinsel(port, pin, PINCONN_PINSEL_GPIO); - - /* Set pull-up mode */ - - lpc17_pullup(cfgset, port, pin); - - /* Open drain only applies to outputs */ - - lpc17_clropendrain(port, pin); - -#elif defined(LPC178x) - /* Configure the pin as a GPIO. Clear opendrain, input inversion, - * hysteris, slew. Set analog pins as digital. - */ - - regval = IOCON_FUNC_GPIO; - - /* Set pull-up mode. Isolate the field from the cfgset and move it - * into the correct position in the register value. - */ - - regval |= (((cfgset & GPIO_PUMODE_MASK) >> GPIO_PUMODE_SHIFT) << IOCON_MODE_SHIFT); - - /* Select input polarity */ - - if ((cfgset & GPIO_INVERT) != 0) - { - regval |= IOCON_INV_MASK; - } - - /* Select hysteresis enable */ - - if ((cfgset & GPIO_HYSTERESIS) != 0) - { - regval |= IOCON_HYS_MASK; - } - - /* Set IOCON register */ - - lpc17_configiocon(port, pin, regval); -#endif - - return OK; -} - -/**************************************************************************** - * Name: lpc17_configinterrupt - * - * Description: - * Configure a GPIO interrupt pin based on bit-encoded description of the pin. - * - ****************************************************************************/ - -static inline int lpc17_configinterrupt(lpc17_pinset_t cfgset, unsigned int port, - unsigned int pin) -{ - /* First, configure the port as a generic input so that we have a known - * starting point and consistent behavior during the re-configuration. - */ - - (void)lpc17_configinput(cfgset, port, pin); - - /* Then just remember the rising/falling edge interrupt enabled */ - - DEBUGASSERT(port == 0 || port == 2); -#ifdef CONFIG_GPIO_IRQ - lpc17_setintedge(port, pin, (cfgset & GPIO_EDGE_MASK) >> GPIO_EDGE_SHIFT); -#endif - return OK; -} - -/**************************************************************************** - * Name: lpc17_configoutput - * - * Description: - * Configure a GPIO output pin based on bit-encoded description of the pin. - * - ****************************************************************************/ - -static inline int lpc17_configoutput(lpc17_pinset_t cfgset, unsigned int port, - unsigned int pin) -{ - uint32_t fiobase; - uint32_t regval; - - /* First, configure the port as a generic input so that we have a known - * starting point and consistent behavior during the re-configuration. - */ - - (void)lpc17_configinput(DEFAULT_INPUT, port, pin); - - /* Now, reconfigure the pin as an output */ - - fiobase = g_fiobase[port]; - regval = getreg32(fiobase + LPC17_FIO_DIR_OFFSET); - regval |= (1 << pin); - putreg32(regval, fiobase + LPC17_FIO_DIR_OFFSET); - -#if defined(LPC176x) - /* Check for open drain output */ - - if ((cfgset & GPIO_OPEN_DRAIN) != 0) - { - /* Set pull-up mode. This normally only applies to input pins, but does have - * meaning if the port is an open drain output. - */ - - lpc17_pullup(cfgset, port, pin); - - /* Select open drain output */ - - lpc17_setopendrain(port, pin); - } - -#elif defined(LPC178x) - /* Configure the pin as a GPIO. Clear opendrain, input inversion, - * hysteris, slew. Set analog pins as digital. - */ - - regval = IOCON_FUNC_GPIO; - - /* Select open drain output */ - - if ((cfgset & GPIO_OPEN_DRAIN) != 0) - { - regval |= IOCON_OD_MASK; - } - - /* Select slew output */ - - if ((cfgset & GPIO_SLEW) != 0) - { - regval |= IOCON_SLEW_MASK; - } - - /* Set pull-up mode. Isolate the field from the cfgset and move it - * into the correct position in the register value. - */ - - regval |= (((cfgset & GPIO_PUMODE_MASK) >> GPIO_PUMODE_SHIFT) << IOCON_MODE_SHIFT); - - /* Set IOCON register */ - - lpc17_configiocon(port, pin, regval); -#endif - - /* Set the initial value of the output */ - - lpc17_gpiowrite(cfgset, ((cfgset & GPIO_VALUE) != GPIO_VALUE_ZERO)); - return OK; -} - -/**************************************************************************** - * Name: lpc17_configalternate - * - * Description: - * Configure a GPIO alternate function pin based on bit-encoded description - * of the pin. - * - ****************************************************************************/ - -static int lpc17_configalternate(lpc17_pinset_t cfgset, unsigned int port, - unsigned int pin, uint32_t alt) -{ - /* First, configure the port as an input so that we have a known - * starting point and consistent behavior during the re-configuration. - */ - - (void)lpc17_configinput(DEFAULT_INPUT, port, pin); - -#if defined(LPC176x) - /* Set up PINSEL registers */ - /* Configure as GPIO */ - - lpc17_pinsel(port, pin, alt); - - /* Set pull-up mode */ - - lpc17_pullup(cfgset, port, pin); - - /* Check for open drain output */ - - if ((cfgset & GPIO_OPEN_DRAIN) != 0) - { - /* Select open drain output */ - - lpc17_setopendrain(port, pin); - } - -#elif defined(LPC178x) - uint32_t regval = 0; - - /* Select the alternate pin */ - - regval |= (alt & IOCON_FUNC_MASK); - - /* Select analog mode */ - - if ((cfgset & GPIO_ADMODE) != 0) - { - regval |= IOCON_ADMODE_MASK; - } - - /* Set pull-up mode. Isolate the field from the cfgset and move it - * into the correct position in the register value. - */ - - regval |= (((cfgset & GPIO_PUMODE_MASK) >> GPIO_PUMODE_SHIFT) << IOCON_MODE_SHIFT); - - /* Select open drain output */ - - if ((cfgset & GPIO_OPEN_DRAIN) != 0) - { - regval |= IOCON_OD_MASK; - } - - /* Set IOCON register */ - - lpc17_configiocon(port, pin, regval); -#endif - - return OK; -} - /**************************************************************************** * Global Functions ****************************************************************************/ - -/**************************************************************************** - * Name: lpc17_configgpio - * - * Description: - * Configure a GPIO pin based on bit-encoded description of the pin. - * - ****************************************************************************/ - -int lpc17_configgpio(lpc17_pinset_t cfgset) -{ - unsigned int port; - unsigned int pin; - int ret = -EINVAL; - - /* Verify that this hardware supports the select GPIO port */ - - port = (cfgset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - if (port < GPIO_NPORTS) - { - /* Get the pin number and select the port configuration register for that pin */ - - pin = (cfgset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; - - /* Handle according to pin function */ - - switch (cfgset & GPIO_FUNC_MASK) - { - case GPIO_INPUT: /* GPIO input pin */ - ret = lpc17_configinput(cfgset, port, pin); - break; - - case GPIO_INTFE: /* GPIO interrupt falling edge */ - case GPIO_INTRE: /* GPIO interrupt rising edge */ - case GPIO_INTBOTH: /* GPIO interrupt both edges */ - ret = lpc17_configinterrupt(cfgset, port, pin); - break; - - case GPIO_OUTPUT: /* GPIO outpout pin */ - ret = lpc17_configoutput(cfgset, port, pin); - break; - -#if defined(LPC176x) - - case GPIO_ALT1: /* Alternate function 1 */ - ret = lpc17_configalternate(cfgset, port, pin, PINCONN_PINSEL_ALT1); - break; - - case GPIO_ALT2: /* Alternate function 2 */ - ret = lpc17_configalternate(cfgset, port, pin, PINCONN_PINSEL_ALT2); - break; - - case GPIO_ALT3: /* Alternate function 3 */ - ret = lpc17_configalternate(cfgset, port, pin, PINCONN_PINSEL_ALT3); - break; - -#elif defined(LPC178x) - - case GPIO_ALT1: /* Alternate function 1 */ - ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT1); - break; - - case GPIO_ALT2: /* Alternate function 2 */ - ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT2); - break; - - case GPIO_ALT3: /* Alternate function 3 */ - ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT3); - break; - - case GPIO_ALT4: /* Alternate function 4 */ - ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT4); - break; - - case GPIO_ALT5: /* Alternate function 5 */ - ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT5); - break; - - case GPIO_ALT6: /* Alternate function 6 */ - ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT6); - break; - - case GPIO_ALT7: /* Alternate function 7 */ - ret = lpc17_configalternate(cfgset, port, pin, IOCON_FUNC_ALT7); - break; - -#endif - - default: - break; - } - } - - return ret; -} - -/**************************************************************************** - * Name: lpc17_gpiowrite - * - * Description: - * Write one or zero to the selected GPIO pin - * - ****************************************************************************/ - -void lpc17_gpiowrite(lpc17_pinset_t pinset, bool value) -{ - uint32_t fiobase; - uint32_t offset; - unsigned int port; - unsigned int pin; - - port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - if (port < GPIO_NPORTS) - { - /* Get the port base address */ - - fiobase = g_fiobase[port]; - - /* Get the pin number */ - - pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; - - /* Set or clear the output on the pin */ - - if (value) - { - offset = LPC17_FIO_SET_OFFSET; - } - else - { - offset = LPC17_FIO_CLR_OFFSET; - } - - putreg32((1 << pin), fiobase + offset); - } -} - -/**************************************************************************** - * Name: lpc17_gpioread - * - * Description: - * Read one or zero from the selected GPIO pin - * - ****************************************************************************/ - -bool lpc17_gpioread(lpc17_pinset_t pinset) -{ - uint32_t fiobase; - unsigned int port; - unsigned int pin; - - port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; - if (port < GPIO_NPORTS) - { - /* Get the port base address */ - - fiobase = g_fiobase[port]; - - /* Get the pin number and return the input state of that pin */ - - pin = (pinset & GPIO_PIN_MASK) >> GPIO_PIN_SHIFT; - return ((getreg32(fiobase + LPC17_FIO_PIN_OFFSET) & (1 << pin)) != 0); - } - - return false; -} diff --git a/arch/arm/src/lpc17xx/lpc17_gpio.h b/arch/arm/src/lpc17xx/lpc17_gpio.h index ca48f471e0..e8ec133789 100644 --- a/arch/arm/src/lpc17xx/lpc17_gpio.h +++ b/arch/arm/src/lpc17xx/lpc17_gpio.h @@ -53,274 +53,23 @@ #include "chip/lpc17_pinconn.h" #include "chip/lpc17_pinconfig.h" -/************************************************************************************ - * Pre-processor Definitions - ************************************************************************************/ -/* Bit-encoded input to lpc17_configgpio() ******************************************/ +/* Include the GPIO definitions for the selected LPC17xx family. */ #if defined(LPC176x) - -/* Encoding: FFFx MMOV PPPN NNNN - * - * Pin Function: FFF - * Pin Mode bits: MM - * Open drain: O (output pins) - * Initial value: V (output pins) - * Port number: PPP (0-4) - * Pin number: NNNNN (0-31) - */ - -/* Pin Function bits: FFF - * Only meaningful when the GPIO function is GPIO_PIN - */ - -#define GPIO_FUNC_SHIFT (13) /* Bits 13-15: GPIO mode */ -#define GPIO_FUNC_MASK (7 << GPIO_FUNC_SHIFT) -# define GPIO_INPUT (0 << GPIO_FUNC_SHIFT) /* 000 GPIO input pin */ -# define GPIO_INTFE (1 << GPIO_FUNC_SHIFT) /* 001 GPIO interrupt falling edge */ -# define GPIO_INTRE (2 << GPIO_FUNC_SHIFT) /* 010 GPIO interrupt rising edge */ -# define GPIO_INTBOTH (3 << GPIO_FUNC_SHIFT) /* 011 GPIO interrupt both edges */ -# define GPIO_OUTPUT (4 << GPIO_FUNC_SHIFT) /* 100 GPIO outpout pin */ -# define GPIO_ALT1 (5 << GPIO_FUNC_SHIFT) /* 101 Alternate function 1 */ -# define GPIO_ALT2 (6 << GPIO_FUNC_SHIFT) /* 110 Alternate function 2 */ -# define GPIO_ALT3 (7 << GPIO_FUNC_SHIFT) /* 111 Alternate function 3 */ - -#define GPIO_EDGE_SHIFT (13) /* Bits 13-14: Interrupt edge bits */ -#define GPIO_EDGE_MASK (3 << GPIO_EDGE_SHIFT) - -#define GPIO_INOUT_MASK GPIO_OUTPUT -#define GPIO_FE_MASK GPIO_INTFE -#define GPIO_RE_MASK GPIO_INTRE - -#define GPIO_ISGPIO(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) <= GPIO_OUTPUT) -#define GPIO_ISALT(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) > GPIO_OUTPUT) -#define GPIO_ISINPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_INPUT) -#define GPIO_ISOUTPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_OUTPUT) -#define GPIO_ISINORINT(ps) (((ps) & GPIO_INOUT_MASK) == 0) -#define GPIO_ISOUTORALT(ps) (((ps) & GPIO_INOUT_MASK) != 0) -#define GPIO_ISINTERRUPT(ps) (GPIO_ISOUTPUT(ps) && !GPIO_ISINPUT(ps)) -#define GPIO_ISFE(ps) (((ps) & GPIO_FE_MASK) != 0) -#define GPIO_ISRE(ps) (((ps) & GPIO_RE_MASK) != 0) - -/* Pin Mode: MM */ - -#define GPIO_PUMODE_SHIFT (10) /* Bits 10-11: Pin pull-up mode */ -#define GPIO_PUMODE_MASK (3 << GPIO_PUMODE_SHIFT) -# define GPIO_PULLUP (0 << GPIO_PUMODE_SHIFT) /* Pull-up resistor enabled */ -# define GPIO_REPEATER (1 << GPIO_PUMODE_SHIFT) /* Repeater mode enabled */ -# define GPIO_FLOAT (2 << GPIO_PUMODE_SHIFT) /* Neither pull-up nor -down */ -# define GPIO_PULLDN (3 << GPIO_PUMODE_SHIFT) /* Pull-down resistor enabled */ - -/* Open drain: O */ - -#define GPIO_OPEN_DRAIN (1 << 9) /* Bit 9: Open drain mode */ - -/* Initial value: V */ - -#define GPIO_VALUE (1 << 8) /* Bit 8: Initial GPIO output value */ -#define GPIO_VALUE_ONE GPIO_VALUE -#define GPIO_VALUE_ZERO (0) - -/* Port number: PPP (0-4) */ - -#define GPIO_PORT_SHIFT (5) /* Bit 5-7: Port number */ -#define GPIO_PORT_MASK (7 << GPIO_PORT_SHIFT) -# define GPIO_PORT0 (0 << GPIO_PORT_SHIFT) -# define GPIO_PORT1 (1 << GPIO_PORT_SHIFT) -# define GPIO_PORT2 (2 << GPIO_PORT_SHIFT) -# define GPIO_PORT3 (3 << GPIO_PORT_SHIFT) -# define GPIO_PORT4 (4 << GPIO_PORT_SHIFT) - -#define GPIO_NPORTS 5 - -/* Pin number: NNNNN (0-31) */ - -#define GPIO_PIN_SHIFT 0 /* Bits 0-4: GPIO number: 0-31 */ -#define GPIO_PIN_MASK (31 << GPIO_PIN_SHIFT) -# define GPIO_PIN0 (0 << GPIO_PIN_SHIFT) -# define GPIO_PIN1 (1 << GPIO_PIN_SHIFT) -# define GPIO_PIN2 (2 << GPIO_PIN_SHIFT) -# define GPIO_PIN3 (3 << GPIO_PIN_SHIFT) -# define GPIO_PIN4 (4 << GPIO_PIN_SHIFT) -# define GPIO_PIN5 (5 << GPIO_PIN_SHIFT) -# define GPIO_PIN6 (6 << GPIO_PIN_SHIFT) -# define GPIO_PIN7 (7 << GPIO_PIN_SHIFT) -# define GPIO_PIN8 (8 << GPIO_PIN_SHIFT) -# define GPIO_PIN9 (9 << GPIO_PIN_SHIFT) -# define GPIO_PIN10 (10 << GPIO_PIN_SHIFT) -# define GPIO_PIN11 (11 << GPIO_PIN_SHIFT) -# define GPIO_PIN12 (12 << GPIO_PIN_SHIFT) -# define GPIO_PIN13 (13 << GPIO_PIN_SHIFT) -# define GPIO_PIN14 (14 << GPIO_PIN_SHIFT) -# define GPIO_PIN15 (15 << GPIO_PIN_SHIFT) -# define GPIO_PIN16 (16 << GPIO_PIN_SHIFT) -# define GPIO_PIN17 (17 << GPIO_PIN_SHIFT) -# define GPIO_PIN18 (18 << GPIO_PIN_SHIFT) -# define GPIO_PIN19 (19 << GPIO_PIN_SHIFT) -# define GPIO_PIN20 (20 << GPIO_PIN_SHIFT) -# define GPIO_PIN21 (21 << GPIO_PIN_SHIFT) -# define GPIO_PIN22 (22 << GPIO_PIN_SHIFT) -# define GPIO_PIN23 (23 << GPIO_PIN_SHIFT) -# define GPIO_PIN24 (24 << GPIO_PIN_SHIFT) -# define GPIO_PIN25 (25 << GPIO_PIN_SHIFT) -# define GPIO_PIN26 (26 << GPIO_PIN_SHIFT) -# define GPIO_PIN27 (27 << GPIO_PIN_SHIFT) -# define GPIO_PIN28 (28 << GPIO_PIN_SHIFT) -# define GPIO_PIN29 (29 << GPIO_PIN_SHIFT) -# define GPIO_PIN30 (30 << GPIO_PIN_SHIFT) -# define GPIO_PIN31 (31 << GPIO_PIN_SHIFT) - +# include "lpc176x_gpio.h" #elif defined(LPC178x) - -/* Encoding: TTTT TTTT FFFF MMOV PPPN NNNN - * - * Special Pin Functions: TTTT TTTT - * Pin Function: FFFF - * Pin Mode bits: MM - * Open drain: O (output pins) - * Initial value: V (output pins) - * Port number: PPP (0-4) - * Pin number: NNNNN (0-31) - */ - -/* Special Pin Functions - * For pins that has ADC/DAC, USB, I2C - */ - -#define GPIO_IOCON_TYPE_D_MASK (0x0000067f) /* All port except where ADC/DAC, USB, I2C is present */ -#define GPIO_IOCON_TYPE_A_MASK (0x000105df) /* USB/ADC/DAC P0:12-13, P0:23-26, P1:30-31 */ -#define GPIO_IOCON_TYPE_U_MASK (0x00000007) /* USB P0:29 to 31 */ -#define GPIO_IOCON_TYPE_I_MASK (0x00000347) /* I2C/USB P0:27-28, P5:2-3 */ -#define GPIO_IOCON_TYPE_W_MASK (0x000007ff) /* I2S P0:7-9 */ - -#define GPIO_IOCON_MASK (0x00ff0000) -# define GPIO_HYSTERESIS (1 << 16) /* Bit 16: HYSTERESIS: 0-Disable, 1-Enabled */ -# define GPIO_INVERT (1 << 17) /* Bit 17: Input: 0-Not Inverted, 1-Inverted */ -# define GPIO_SLEW (1 << 18) /* Bit 18: Rate Control: 0-Standard mode, 1-Fast mode */ -# define GPIO_ADMODE (1 << 19) /* Bit 19: A/D Modes: 0-Analog, 1-Digital */ -# define GPIO_FILTER (1 << 20) /* Bit 20: Filter: 0-Off, 1-ON */ -# define GPIO_DACEN (1 << 21) /* Bit 21: DAC: 0-Disabled, 1-Enabled, P0:26 only */ -# define GPIO_I2CHS (1 << 22) /* Bit 22: Filter and Rate Control: 0-Enabled, 1-Disabled */ -# define GPIO_HIDRIVE (1 << 23) /* Bit 23: Current Sink: 0-4mA, 1-20mA P5:2 and P5:3 only,*/ - -/* Pin Function bits: FFFF - * Only meaningful when the GPIO function is GPIO_PIN - */ - -#define GPIO_FUNC_SHIFT (12) /* Bits 12-15: GPIO mode */ -#define GPIO_FUNC_MASK (15 << GPIO_FUNC_SHIFT) -# define GPIO_INPUT (0 << GPIO_FUNC_SHIFT) /* 0000 GPIO input pin */ -# define GPIO_INTFE (1 << GPIO_FUNC_SHIFT) /* 0001 GPIO interrupt falling edge */ -# define GPIO_INTRE (2 << GPIO_FUNC_SHIFT) /* 0010 GPIO interrupt rising edge */ -# define GPIO_INTBOTH (3 << GPIO_FUNC_SHIFT) /* 0011 GPIO interrupt both edges */ -# define GPIO_OUTPUT (4 << GPIO_FUNC_SHIFT) /* 0100 GPIO outpout pin */ -# define GPIO_ALT1 (5 << GPIO_FUNC_SHIFT) /* 0101 Alternate function 1 */ -# define GPIO_ALT2 (6 << GPIO_FUNC_SHIFT) /* 0110 Alternate function 2 */ -# define GPIO_ALT3 (7 << GPIO_FUNC_SHIFT) /* 0111 Alternate function 3 */ -# define GPIO_ALT4 (8 << GPIO_FUNC_SHIFT) /* 1000 Alternate function 4 */ -# define GPIO_ALT5 (9 << GPIO_FUNC_SHIFT) /* 1001 Alternate function 5 */ -# define GPIO_ALT6 (10 << GPIO_FUNC_SHIFT) /* 1010 Alternate function 6 */ -# define GPIO_ALT7 (11 << GPIO_FUNC_SHIFT) /* 1011 Alternate function 7 */ - -#define GPIO_EDGE_SHIFT (12) /* Bits 12-13: Interrupt edge bits */ -#define GPIO_EDGE_MASK (3 << GPIO_EDGE_SHIFT) - -#define GPIO_INOUT_MASK GPIO_OUTPUT -#define GPIO_FE_MASK GPIO_INTFE -#define GPIO_RE_MASK GPIO_INTRE - -#define GPIO_ISGPIO(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) <= GPIO_OUTPUT) -#define GPIO_ISALT(ps) ((uint16_t(ps) & GPIO_FUNC_MASK) > GPIO_OUTPUT) -#define GPIO_ISINPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_INPUT) -#define GPIO_ISOUTPUT(ps) (((ps) & GPIO_FUNC_MASK) == GPIO_OUTPUT) -#define GPIO_ISINORINT(ps) (((ps) & GPIO_INOUT_MASK) == 0) -#define GPIO_ISOUTORALT(ps) (((ps) & GPIO_INOUT_MASK) != 0) -#define GPIO_ISINTERRUPT(ps) (GPIO_ISOUTPUT(ps) && !GPIO_ISINPUT(ps)) -#define GPIO_ISFE(ps) (((ps) & GPIO_FE_MASK) != 0) -#define GPIO_ISRE(ps) (((ps) & GPIO_RE_MASK) != 0) - -/* Pin Mode: MM */ - -#define GPIO_PUMODE_SHIFT (10) /* Bits 10-11: Pin pull-up mode */ -#define GPIO_PUMODE_MASK (3 << GPIO_PUMODE_SHIFT) -# define GPIO_FLOAT (0 << GPIO_PUMODE_SHIFT) /* Neither pull-up nor -down */ -# define GPIO_PULLDN (1 << GPIO_PUMODE_SHIFT) /* Pull-down resistor enabled */ -# define GPIO_PULLUP (2 << GPIO_PUMODE_SHIFT) /* Pull-up resistor enabled */ -# define GPIO_REPEATER (3 << GPIO_PUMODE_SHIFT) /* Repeater mode enabled */ - -/* Open drain: O */ - -#define GPIO_OPEN_DRAIN (1 << 9) /* Bit 9: Open drain mode */ - -/* Initial value: V */ - -#define GPIO_VALUE (1 << 8) /* Bit 8: Initial GPIO output value */ -# define GPIO_VALUE_ONE GPIO_VALUE -# define GPIO_VALUE_ZERO (0) - -/* Port number: PPP (0-5) */ - -#define GPIO_PORT_SHIFT (5) /* Bit 5-7: Port number */ -#define GPIO_PORT_MASK (7 << GPIO_PORT_SHIFT) -# define GPIO_PORT0 (0 << GPIO_PORT_SHIFT) -# define GPIO_PORT1 (1 << GPIO_PORT_SHIFT) -# define GPIO_PORT2 (2 << GPIO_PORT_SHIFT) -# define GPIO_PORT3 (3 << GPIO_PORT_SHIFT) -# define GPIO_PORT4 (4 << GPIO_PORT_SHIFT) -# define GPIO_PORT5 (5 << GPIO_PORT_SHIFT) - -#define GPIO_NPORTS 6 - -/* Pin number: NNNNN (0-31) */ - -#define GPIO_PIN_SHIFT 0 /* Bits 0-4: GPIO number: 0-31 */ -#define GPIO_PIN_MASK (31 << GPIO_PIN_SHIFT) -# define GPIO_PIN0 (0 << GPIO_PIN_SHIFT) -# define GPIO_PIN1 (1 << GPIO_PIN_SHIFT) -# define GPIO_PIN2 (2 << GPIO_PIN_SHIFT) -# define GPIO_PIN3 (3 << GPIO_PIN_SHIFT) -# define GPIO_PIN4 (4 << GPIO_PIN_SHIFT) -# define GPIO_PIN5 (5 << GPIO_PIN_SHIFT) -# define GPIO_PIN6 (6 << GPIO_PIN_SHIFT) -# define GPIO_PIN7 (7 << GPIO_PIN_SHIFT) -# define GPIO_PIN8 (8 << GPIO_PIN_SHIFT) -# define GPIO_PIN9 (9 << GPIO_PIN_SHIFT) -# define GPIO_PIN10 (10 << GPIO_PIN_SHIFT) -# define GPIO_PIN11 (11 << GPIO_PIN_SHIFT) -# define GPIO_PIN12 (12 << GPIO_PIN_SHIFT) -# define GPIO_PIN13 (13 << GPIO_PIN_SHIFT) -# define GPIO_PIN14 (14 << GPIO_PIN_SHIFT) -# define GPIO_PIN15 (15 << GPIO_PIN_SHIFT) -# define GPIO_PIN16 (16 << GPIO_PIN_SHIFT) -# define GPIO_PIN17 (17 << GPIO_PIN_SHIFT) -# define GPIO_PIN18 (18 << GPIO_PIN_SHIFT) -# define GPIO_PIN19 (19 << GPIO_PIN_SHIFT) -# define GPIO_PIN20 (20 << GPIO_PIN_SHIFT) -# define GPIO_PIN21 (21 << GPIO_PIN_SHIFT) -# define GPIO_PIN22 (22 << GPIO_PIN_SHIFT) -# define GPIO_PIN23 (23 << GPIO_PIN_SHIFT) -# define GPIO_PIN24 (24 << GPIO_PIN_SHIFT) -# define GPIO_PIN25 (25 << GPIO_PIN_SHIFT) -# define GPIO_PIN26 (26 << GPIO_PIN_SHIFT) -# define GPIO_PIN27 (27 << GPIO_PIN_SHIFT) -# define GPIO_PIN28 (28 << GPIO_PIN_SHIFT) -# define GPIO_PIN29 (29 << GPIO_PIN_SHIFT) -# define GPIO_PIN30 (30 << GPIO_PIN_SHIFT) -# define GPIO_PIN31 (31 << GPIO_PIN_SHIFT) - +# include "lpc178x_gpio.h" #else # error "Unrecognized LPC17xx family" #endif /************************************************************************************ - * Public Types + * Pre-processor Definitions ************************************************************************************/ -#ifdef LPC176x -typedef uint16_t lpc17_pinset_t; -#else -typedef uint32_t lpc17_pinset_t; -#endif +/************************************************************************************ + * Public Types + ************************************************************************************/ /************************************************************************************ * Public Data @@ -347,14 +96,6 @@ EXTERN uint64_t g_intedge2; EXTERN const uint32_t g_fiobase[GPIO_NPORTS]; EXTERN const uint32_t g_intbase[GPIO_NPORTS]; -EXTERN const uint32_t g_lopinsel[GPIO_NPORTS]; -EXTERN const uint32_t g_hipinsel[GPIO_NPORTS]; -EXTERN const uint32_t g_lopinmode[GPIO_NPORTS]; -EXTERN const uint32_t g_hipinmode[GPIO_NPORTS]; -EXTERN const uint32_t g_odmode[GPIO_NPORTS]; -#ifdef LPC178x -EXTERN const uint32_t g_ioconport[GPIO_NPORTS]; -#endif /**************************************************************************** * Public Functions