sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update README

Browse Source
This commit is contained in:
Gregory Nutt 2018-05-28 07:46:14 -06:00
parent d260d9e703
commit 1a00aff177
1 changed files with 37 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
configs/olimex-stm32-p407/README.txt
View File

@ -433,8 +433,10 @@ must be is one of the following.
General usage instructions:
1. Common Setup
[on target]
1. nsh> mount -t vfat /dev/sda /mnt
nsh> mount -t vfat /dev/sda /mnt
[on Linux host]
$ sudo stty -F /dev/ttyS0 9600
@ -442,19 +444,21 @@ must be is one of the following.
$ sudo stty -F /dev/ttyS0 raw
$ sudo stty -F /dev/ttyS0
2. Host-to-Target File Transfer
[on target]
nsh> rz
[on host]
$ sudo sz <filename> [-l nnnn] </dev/ttyS0 >/dev/ttyS0
Where <filename> is the file that you want to send. If -l nnnn is not
specified, then there will likely be packet buffer overflow errors.
Where <filename> is the file that you want to transfer. If -l nnnn is
not specified, then there will likely be packet buffer overflow errors.
nnnn should be set to a value less than or equal to
CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE
If you are using the NuttX implementation of rz and sz on the Linux host,
then the last command simplies to just:
then the last command simplifies to just:
[on host]
$ cp README.txt /tmp/.
@ -467,6 +471,28 @@ must be is one of the following.
Refer to the README file at apps/examples/zmodem for detailed information
about building rz/sz for the host and about zmodem usage in general.
3. Target-to-Host File Transfer
[on host]
$ rz </dev/ttyS0 >/dev/ttyS0
The transferred file will end up in the current directory.
If you are using the NuttX implementation of rz and sz on the Linux host,
then the last command simplifies to just:
[on host]
$ ./rz
The transferred file will lie in the /tmp directory.
Thn on the target side:
[on target]
nsh sz <filename>
Where <filename> is the file that you want to transfer.
STATUS
======
@ -484,7 +510,10 @@ STATUS
2017-01-23: Added the knsh configuration and support for the PROTECTED
build mode.
2018-05-29: Added the zmodem configuration. Verified correct operation
with host-to-target transfers. There appears to be problems still host
target-to-host transfers and with use of the NuttX versions of rx/sz on
the host.
2018-05-27: Added the zmodem configuration. Verified correct operation
with host-to-target transfers (using Linux sz command). There appears
to be a problem using the NuttX sz command running on the host???
2018-05-28: Verified correct operation with target-to-host transfers (using
Linux rz command). There appears to be a problem using the NuttX rz
command running on the host???