ARM and ARMv7-M ELF support; STM32F4Discovery ELF loader test configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5264 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
925d4b7e6a
commit
1b06537cc6
@ -982,43 +982,81 @@ can be selected as follow:
|
|||||||
|
|
||||||
Where <subdir> is one of the following:
|
Where <subdir> is one of the following:
|
||||||
|
|
||||||
|
elf:
|
||||||
|
---
|
||||||
|
|
||||||
|
This configuration derives from the ostest configuration. It has
|
||||||
|
been modified to us apps/examples/elf in order to test the ELF
|
||||||
|
loader.
|
||||||
|
|
||||||
|
NOTES:
|
||||||
|
|
||||||
|
1. This configuration uses the mconf-based configuration tool. To
|
||||||
|
change this configuration using that tool, you should:
|
||||||
|
|
||||||
|
a. Build and install the mconf tool. See nuttx/README.txt and
|
||||||
|
misc/tools/
|
||||||
|
|
||||||
|
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||||
|
reconfiguration process.
|
||||||
|
|
||||||
|
2. Default toolchain:
|
||||||
|
|
||||||
|
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
|
||||||
|
|
||||||
|
3. By default, this project assumes that you are *NOT* using the DFU
|
||||||
|
bootloader.
|
||||||
|
|
||||||
ostest:
|
ostest:
|
||||||
------
|
------
|
||||||
This configuration directory, performs a simple OS test using
|
This configuration directory, performs a simple OS test using
|
||||||
examples/ostest. By default, this project assumes that you are
|
apps/examples/ostest.
|
||||||
using the DFU bootloader.
|
|
||||||
|
|
||||||
Default toolchain:
|
NOTES:
|
||||||
|
|
||||||
|
1. This configuration uses the mconf-based configuration tool. To
|
||||||
|
change this configuration using that tool, you should:
|
||||||
|
|
||||||
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X
|
a. Build and install the mconf tool. See nuttx/README.txt and
|
||||||
|
misc/tools/
|
||||||
|
|
||||||
If you use the Atollic toolchain, then the FPU test can be enabled in the
|
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||||
examples/ostest by adding the following your NuttX configuration file:
|
reconfiguration process.
|
||||||
|
|
||||||
-CONFIG_ARCH_FPU=n : Enable FPU support
|
2. Default toolchain:
|
||||||
+CONFIG_ARCH_FPU=y
|
|
||||||
|
|
||||||
-CONFIG_STM32_CODESOURCERYW=y : Disable the CodeSourcery toolchain
|
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X
|
||||||
+CONFIG_STM32_CODESOURCERYW=n
|
|
||||||
|
|
||||||
-CONFIG_STM32_ATOLLIC_LITE=n : Enable *one* the Atollic toolchains
|
3. By default, this project assumes that you are *NOT* using the DFU
|
||||||
CONFIG_STM32_ATOLLIC_PRO=n
|
bootloader.
|
||||||
-CONFIG_STM32_ATOLLIC_LITE=y : The "Lite" version
|
|
||||||
CONFIG_STM32_ATOLLIC_PRO=n : The "Pro" version
|
4. If you use the Atollic toolchain, then the FPU test can be enabled in the
|
||||||
|
examples/ostest by adding the following your NuttX configuration file:
|
||||||
|
|
||||||
-CONFIG_INTELHEX_BINARY=y : Suppress generation FLASH download formats
|
-CONFIG_ARCH_FPU=n : Enable FPU support
|
||||||
+CONFIG_INTELHEX_BINARY=n : (Only necessary with the "Lite" version)
|
+CONFIG_ARCH_FPU=y
|
||||||
|
|
||||||
-CONFIG_HAVE_CXX=y : Suppress generation of C++ code
|
-CONFIG_STM32_CODESOURCERYW=y : Disable the CodeSourcery toolchain
|
||||||
+CONFIG_HAVE_CXX=n : (Only necessary with the "Lite" version)
|
+CONFIG_STM32_CODESOURCERYW=n
|
||||||
|
|
||||||
-CONFIG_SCHED_WAITPID=y : Enable the waitpid() API needed by the FPU test
|
-CONFIG_STM32_ATOLLIC_LITE=n : Enable *one* the Atollic toolchains
|
||||||
+CONFIG_SCHED_WAITPID=n
|
CONFIG_STM32_ATOLLIC_PRO=n
|
||||||
|
-CONFIG_STM32_ATOLLIC_LITE=y : The "Lite" version
|
||||||
|
CONFIG_STM32_ATOLLIC_PRO=n : The "Pro" version
|
||||||
|
|
||||||
The FPU test also needs to know the size of the FPU registers save area in
|
-CONFIG_INTELHEX_BINARY=y : Suppress generation FLASH download formats
|
||||||
bytes (see arch/arm/include/armv7-m/irq_lazyfpu.h):
|
+CONFIG_INTELHEX_BINARY=n : (Only necessary with the "Lite" version)
|
||||||
|
|
||||||
-CONFIG_EXAMPLES_OSTEST_FPUSIZE=(4*33)
|
-CONFIG_HAVE_CXX=y : Suppress generation of C++ code
|
||||||
|
+CONFIG_HAVE_CXX=n : (Only necessary with the "Lite" version)
|
||||||
|
|
||||||
|
-CONFIG_SCHED_WAITPID=y : Enable the waitpid() API needed by the FPU test
|
||||||
|
+CONFIG_SCHED_WAITPID=n
|
||||||
|
|
||||||
|
The FPU test also needs to know the size of the FPU registers save area in
|
||||||
|
bytes (see arch/arm/include/armv7-m/irq_lazyfpu.h):
|
||||||
|
|
||||||
|
-CONFIG_EXAMPLES_OSTEST_FPUSIZE=(4*33)
|
||||||
|
|
||||||
nsh:
|
nsh:
|
||||||
---
|
---
|
||||||
|
|||||||
191
configs/stm32f4discovery/elf/Make.defs
Normal file
191
configs/stm32f4discovery/elf/Make.defs
Normal file
@ -0,0 +1,191 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/stm32f4discovery/elf/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
include ${TOPDIR}/tools/Config.mk
|
||||||
|
|
||||||
|
# Setup for the selected toolchain
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
|
||||||
|
# CodeSourcery under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
|
||||||
|
# CodeSourcery under Linux
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCROSSDEV = arm-none-eabi-
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_ATOLLIC_LITE),y)
|
||||||
|
# Atollic toolchain under Windows
|
||||||
|
CROSSDEV = arm-atollic-eabi-
|
||||||
|
ARCROSSDEV =
|
||||||
|
WINTOOL = y
|
||||||
|
ifeq ($(CONFIG_ARCH_FPU),y)
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
||||||
|
else
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_ATOLLIC_PRO),y)
|
||||||
|
# Atollic toolchain under Windows
|
||||||
|
CROSSDEV = arm-atollic-eabi-
|
||||||
|
ARCROSSDEV = arm-atollic-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ifeq ($(CONFIG_ARCH_FPU),y)
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
||||||
|
else
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_DEVKITARM),y)
|
||||||
|
# devkitARM under Windows
|
||||||
|
CROSSDEV = arm-eabi-
|
||||||
|
ARCROSSDEV = arm-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_RAISONANCE),y)
|
||||||
|
# Raisonance RIDE7 under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_BUILDROOT),y)
|
||||||
|
# NuttX buildroot under Linux or Cygwin
|
||||||
|
# OABI
|
||||||
|
# CROSSDEV = arm-nuttx-elf-
|
||||||
|
# ARCROSSDEV = arm-nuttx-elf-
|
||||||
|
# ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||||
|
# EABI
|
||||||
|
CROSSDEV = arm-nuttx-eabi-
|
||||||
|
ARCROSSDEV = arm-nuttx-eabi-
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -Os
|
||||||
|
endif
|
||||||
|
|
||||||
|
LDSCRIPT = ld.script
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(ARCROSSDEV)ar rcs
|
||||||
|
NM = $(ARCROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
# NXFLAT module definitions
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
# ELF module definitions
|
||||||
|
|
||||||
|
LDELFFLAGS = -r -e main
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
LDELFFLAGS += -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld}"
|
||||||
|
else
|
||||||
|
LDELFFLAGS += -T $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld
|
||||||
|
endif
|
||||||
|
|
||||||
|
# File extensions
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
# Linker flags
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Host tools
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
830
configs/stm32f4discovery/elf/defconfig
Normal file
830
configs/stm32f4discovery/elf/defconfig
Normal file
@ -0,0 +1,830 @@
|
|||||||
|
#
|
||||||
|
# Automatically generated file; DO NOT EDIT.
|
||||||
|
# Nuttx/ Configuration
|
||||||
|
#
|
||||||
|
CONFIG_NUTTX_NEWCONFIG=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXPERIMENTAL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR="../apps"
|
||||||
|
# CONFIG_BUILD_2PASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Output Formats
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY is not set
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
# CONFIG_MOTOROLA_SREC is not set
|
||||||
|
# CONFIG_RAW_BINARY is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Customize Header Files
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_STDBOOL_H is not set
|
||||||
|
# CONFIG_ARCH_MATH_H is not set
|
||||||
|
# CONFIG_ARCH_STDARG_H is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Debug Options
|
||||||
|
#
|
||||||
|
# CONFIG_DEBUG is not set
|
||||||
|
# CONFIG_DEBUG_SYMBOLS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Type
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_8051 is not set
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
# CONFIG_ARCH_AVR is not set
|
||||||
|
# CONFIG_ARCH_HC is not set
|
||||||
|
# CONFIG_ARCH_MIPS is not set
|
||||||
|
# CONFIG_ARCH_RGMP is not set
|
||||||
|
# CONFIG_ARCH_SH is not set
|
||||||
|
# CONFIG_ARCH_SIM is not set
|
||||||
|
# CONFIG_ARCH_X86 is not set
|
||||||
|
# CONFIG_ARCH_Z16 is not set
|
||||||
|
# CONFIG_ARCH_Z80 is not set
|
||||||
|
CONFIG_ARCH="arm"
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARM Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||||
|
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_IMX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LM3S is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||||
|
CONFIG_ARCH_CHIP_STM32=y
|
||||||
|
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||||
|
CONFIG_ARCH_CORTEXM4=y
|
||||||
|
CONFIG_ARCH_FAMILY="armv7-m"
|
||||||
|
CONFIG_ARCH_CHIP="stm32"
|
||||||
|
# CONFIG_ARCH_FPU is not set
|
||||||
|
CONFIG_ARCH_HAVE_MPU=y
|
||||||
|
# CONFIG_ARMV7M_MPU is not set
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||||
|
# CONFIG_ARCH_CALIBRATION is not set
|
||||||
|
# CONFIG_SERIAL_TERMIOS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# STM32 Configuration Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F100CB is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F100RB is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F100VB is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F107VC is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F207IG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F405RG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F405VG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F407VE is not set
|
||||||
|
CONFIG_ARCH_CHIP_STM32F407VG=y
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F407IE is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32F407IG is not set
|
||||||
|
CONFIG_STM32_STM32F40XX=y
|
||||||
|
CONFIG_STM32_CODESOURCERYW=y
|
||||||
|
# CONFIG_STM32_CODESOURCERYL is not set
|
||||||
|
# CONFIG_STM32_ATOLLIC_LITE is not set
|
||||||
|
# CONFIG_STM32_ATOLLIC_PRO is not set
|
||||||
|
# CONFIG_STM32_DEVKITARM is not set
|
||||||
|
# CONFIG_STM32_RAISONANCE is not set
|
||||||
|
# CONFIG_STM32_BUILDROOT is not set
|
||||||
|
# CONFIG_STM32_DFU is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# STM32 Peripheral Support
|
||||||
|
#
|
||||||
|
# CONFIG_STM32_ADC1 is not set
|
||||||
|
# CONFIG_STM32_ADC2 is not set
|
||||||
|
# CONFIG_STM32_ADC3 is not set
|
||||||
|
# CONFIG_STM32_CRC is not set
|
||||||
|
# CONFIG_STM32_DMA1 is not set
|
||||||
|
# CONFIG_STM32_DMA2 is not set
|
||||||
|
# CONFIG_STM32_BKPSRAM is not set
|
||||||
|
# CONFIG_STM32_CAN1 is not set
|
||||||
|
# CONFIG_STM32_CAN2 is not set
|
||||||
|
# CONFIG_STM32_CCMDATARAM is not set
|
||||||
|
# CONFIG_STM32_CRYP is not set
|
||||||
|
# CONFIG_STM32_DAC1 is not set
|
||||||
|
# CONFIG_STM32_DAC2 is not set
|
||||||
|
# CONFIG_STM32_DCMI is not set
|
||||||
|
# CONFIG_STM32_ETHMAC is not set
|
||||||
|
# CONFIG_STM32_FSMC is not set
|
||||||
|
# CONFIG_STM32_HASH is not set
|
||||||
|
# CONFIG_STM32_I2C1 is not set
|
||||||
|
# CONFIG_STM32_I2C2 is not set
|
||||||
|
# CONFIG_STM32_I2C3 is not set
|
||||||
|
# CONFIG_STM32_IWDG is not set
|
||||||
|
# CONFIG_STM32_OTGFS is not set
|
||||||
|
# CONFIG_STM32_OTGHS is not set
|
||||||
|
# CONFIG_STM32_PWR is not set
|
||||||
|
# CONFIG_STM32_RNG is not set
|
||||||
|
# CONFIG_STM32_SDIO is not set
|
||||||
|
# CONFIG_STM32_SPI1 is not set
|
||||||
|
# CONFIG_STM32_SPI2 is not set
|
||||||
|
# CONFIG_STM32_SPI3 is not set
|
||||||
|
CONFIG_STM32_SYSCFG=y
|
||||||
|
# CONFIG_STM32_TIM1 is not set
|
||||||
|
# CONFIG_STM32_TIM2 is not set
|
||||||
|
# CONFIG_STM32_TIM3 is not set
|
||||||
|
# CONFIG_STM32_TIM4 is not set
|
||||||
|
# CONFIG_STM32_TIM5 is not set
|
||||||
|
# CONFIG_STM32_TIM6 is not set
|
||||||
|
# CONFIG_STM32_TIM7 is not set
|
||||||
|
# CONFIG_STM32_TIM8 is not set
|
||||||
|
# CONFIG_STM32_TIM9 is not set
|
||||||
|
# CONFIG_STM32_TIM10 is not set
|
||||||
|
# CONFIG_STM32_TIM11 is not set
|
||||||
|
# CONFIG_STM32_TIM12 is not set
|
||||||
|
# CONFIG_STM32_TIM13 is not set
|
||||||
|
# CONFIG_STM32_TIM14 is not set
|
||||||
|
# CONFIG_STM32_USART1 is not set
|
||||||
|
CONFIG_STM32_USART2=y
|
||||||
|
# CONFIG_STM32_USART3 is not set
|
||||||
|
# CONFIG_STM32_UART4 is not set
|
||||||
|
# CONFIG_STM32_UART5 is not set
|
||||||
|
# CONFIG_STM32_USART6 is not set
|
||||||
|
# CONFIG_STM32_WWDG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Alternate Pin Mapping
|
||||||
|
#
|
||||||
|
# CONFIG_STM32_JTAG_DISABLE is not set
|
||||||
|
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
|
||||||
|
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
|
||||||
|
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||||
|
# CONFIG_STM32_FORCEPOWER is not set
|
||||||
|
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
|
||||||
|
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Host Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_NOINTC is not set
|
||||||
|
# CONFIG_ARCH_DMA is not set
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Settings
|
||||||
|
#
|
||||||
|
CONFIG_DRAM_START=0x20000000
|
||||||
|
CONFIG_DRAM_SIZE=196608
|
||||||
|
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot options
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=y
|
||||||
|
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||||
|
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||||
|
# CONFIG_BOOT_COPYTORAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Selection
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
|
||||||
|
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||||
|
CONFIG_ARCH_BOARD="stm32f4discovery"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Common Board Options
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_HAVE_LEDS=y
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||||
|
# CONFIG_ARCH_BUTTONS is not set
|
||||||
|
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board-Specific Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS Features
|
||||||
|
#
|
||||||
|
CONFIG_MSEC_PER_TICK=10
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
# CONFIG_JULIAN_TIME is not set
|
||||||
|
CONFIG_START_YEAR=2012
|
||||||
|
CONFIG_START_MONTH=10
|
||||||
|
CONFIG_START_DAY=26
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=y
|
||||||
|
# CONFIG_MUTEX_TYPES is not set
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||||
|
# CONFIG_FDCLONE_DISABLE is not set
|
||||||
|
# CONFIG_FDCLONE_STDIO is not set
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
# CONFIG_SCHED_WORKQUEUE is not set
|
||||||
|
# CONFIG_SCHED_WAITPID is not set
|
||||||
|
# CONFIG_SCHED_ATEXIT is not set
|
||||||
|
# CONFIG_SCHED_ONEXIT is not set
|
||||||
|
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||||
|
CONFIG_DISABLE_OS_API=y
|
||||||
|
# CONFIG_DISABLE_CLOCK is not set
|
||||||
|
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||||
|
# CONFIG_DISABLE_PTHREAD is not set
|
||||||
|
# CONFIG_DISABLE_SIGNALS is not set
|
||||||
|
# CONFIG_DISABLE_MQUEUE is not set
|
||||||
|
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||||
|
# CONFIG_DISABLE_ENVIRON is not set
|
||||||
|
# CONFIG_DISABLE_POLL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_CUSTOM_STACK is not set
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_DEV_NULL=y
|
||||||
|
# CONFIG_DEV_ZERO is not set
|
||||||
|
# CONFIG_LOOP is not set
|
||||||
|
# CONFIG_RAMDISK is not set
|
||||||
|
# CONFIG_CAN is not set
|
||||||
|
# CONFIG_PWM is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
CONFIG_ARCH_HAVE_I2CRESET=y
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_RTC is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
# CONFIG_ANALOG is not set
|
||||||
|
# CONFIG_BCH is not set
|
||||||
|
# CONFIG_INPUT is not set
|
||||||
|
# CONFIG_LCD is not set
|
||||||
|
# CONFIG_MMCSD is not set
|
||||||
|
# CONFIG_MTD is not set
|
||||||
|
# CONFIG_PIPES is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
# CONFIG_POWER is not set
|
||||||
|
# CONFIG_SENSORS is not set
|
||||||
|
# CONFIG_SERCOMM_CONSOLE is not set
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
# CONFIG_LOWLEVEL_CONSOLE is not set
|
||||||
|
# CONFIG_16550_UART is not set
|
||||||
|
CONFIG_ARCH_HAVE_USART2=y
|
||||||
|
CONFIG_MCU_SERIAL=y
|
||||||
|
CONFIG_STANDARD_SERIAL=y
|
||||||
|
CONFIG_CONFIG_SERIAL_NPOLLWAITERS=2
|
||||||
|
CONFIG_USART2_SERIAL_CONSOLE=y
|
||||||
|
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USART2 Configuration
|
||||||
|
#
|
||||||
|
CONFIG_USART2_RXBUFSIZE=128
|
||||||
|
CONFIG_USART2_TXBUFSIZE=128
|
||||||
|
CONFIG_USART2_BAUD=115200
|
||||||
|
CONFIG_USART2_BITS=8
|
||||||
|
CONFIG_USART2_PARITY=0
|
||||||
|
CONFIG_USART2_2STOP=0
|
||||||
|
# CONFIG_USBDEV is not set
|
||||||
|
# CONFIG_USBHOST is not set
|
||||||
|
# CONFIG_WIRELESS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging Device Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_RAMLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Support
|
||||||
|
#
|
||||||
|
# CONFIG_NET is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File Systems
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# File system configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_FAT is not set
|
||||||
|
# CONFIG_FS_RAMMAP is not set
|
||||||
|
# CONFIG_FS_NXFFS is not set
|
||||||
|
CONFIG_FS_ROMFS=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_SYSLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_NX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Memory Management
|
||||||
|
#
|
||||||
|
# CONFIG_MM_SMALL is not set
|
||||||
|
CONFIG_MM_REGIONS=2
|
||||||
|
# CONFIG_GRAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Formats
|
||||||
|
#
|
||||||
|
# CONFIG_BINFMT_DISABLE is not set
|
||||||
|
# CONFIG_NXFLAT is not set
|
||||||
|
CONFIG_ELF=y
|
||||||
|
CONFIG_ELF_ALIGN_LOG2=2
|
||||||
|
CONFIG_ELF_STACKSIZE=2048
|
||||||
|
CONFIG_ELF_BUFFERSIZE=128
|
||||||
|
CONFIG_ELF_BUFFERINCR=32
|
||||||
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library Routines
|
||||||
|
#
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=256
|
||||||
|
CONFIG_STDIO_LINEBUFFER=y
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
CONFIG_LIB_HOMEDIR="/"
|
||||||
|
# CONFIG_HAVE_LIBM is not set
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||||
|
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||||
|
# CONFIG_EOL_IS_CR is not set
|
||||||
|
# CONFIG_EOL_IS_LF is not set
|
||||||
|
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||||
|
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||||
|
# CONFIG_LIBC_STRERROR is not set
|
||||||
|
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||||
|
# CONFIG_ARCH_ROMGETC is not set
|
||||||
|
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||||
|
# CONFIG_HAVE_CXX is not set
|
||||||
|
# CONFIG_HAVE_CXXINITIALIZE is not set
|
||||||
|
# CONFIG_CXX_NEWLONG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Application Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Named Applications
|
||||||
|
#
|
||||||
|
# CONFIG_NAMEDAPP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Examples
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# ADC Example
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Buttons Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# CAN Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_CAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB CDC/ACM Class Driver Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_CDCACM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB composite Class Driver Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# DHCP Server Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_DHCPD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ELF Loader Example
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_ELF=y
|
||||||
|
CONFIG_EXAMPLES_ELF_DEVMINOR=0
|
||||||
|
CONFIG_EXAMPLES_ELF_DEVPATH="/dev/ram0"
|
||||||
|
|
||||||
|
#
|
||||||
|
# FTP Client Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_FTPC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FTP Server Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_FTPD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# "Hello, World!" Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_HELLO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# "Hello, World!" C++ Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB HID Keyboard Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# IGMP Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_IGMP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# LCD Read/Write Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_LCDRW is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Memory Management Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_MM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File System Mount Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_MOUNT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FreeModBus Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_MODBUS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network Test Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NETTEST is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NuttShell (NSH) Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NSH is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NULL Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NULL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NX Graphics Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxConsole Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NXFFS File System Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NXFFS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NXFLAT Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NX Graphics "Hello, World!" Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NX Graphics image Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NX Graphics lines Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NXLINES is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NX Graphics Text Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# OS Test Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_OSTEST is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pascal "Hello, World!"example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pipe Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_PIPE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Poll Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_POLL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pulse Width Modulation (PWM) Example
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Quadrature Encoder Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_QENCODER is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RGMP Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_RGMP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ROMFS Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_ROMFS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# sendmail Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Serial Loopback Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Telnet Daemon Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_TELNETD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# THTTPD Web Server Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_THTTPD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# TIFF Generation Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_TIFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Touchscreen Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# UDP Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_UDP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# UDP Discovery Daemon Example
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# uIP Web Server Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_UIP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Test Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Mass Storage Class Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBMSC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Terminal Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBTERM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Watchdog timer Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# wget Example
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# WLAN Example
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_WLAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# XML RPC Example
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
# CONFIG_FICL is not set
|
||||||
|
# CONFIG_PCODE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network Utilities
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Utilities
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# DHCP client
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_DHCPC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# DHCP server
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_DHCPD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FTP client
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_FTPC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FTP server
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_FTPD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Name resolution
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_RESOLV is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SMTP
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_SMTP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# TFTP client
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_TELNETD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# TFTP client
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_TFTPC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# THTTPD web server
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_THTTPD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# uIP support library
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_UIPLIB is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# uIP web client
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# uIP web server
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# UDP Discovery Utility
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# XML-RPC library
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# ModBus
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# FreeModbus
|
||||||
|
#
|
||||||
|
# CONFIG_MODBUS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NSH Library
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_LIBRARY is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxWidgets/NxWM
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System NSH Add-Ons
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Custom Free Memory Command
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_FREE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C tool
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Program Installation
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INSTALL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# readline()
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_READLINE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Power Off
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_POWEROFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAMTRON
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTRON is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SD Card
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SDCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sysinfo
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SYSINFO is not set
|
||||||
79
configs/stm32f4discovery/elf/setenv.sh
Executable file
79
configs/stm32f4discovery/elf/setenv.sh
Executable file
@ -0,0 +1,79 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/stm32f4discovery/elf/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$_" = "$0" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
if [ ! -x "setenv.sh" ]; then
|
||||||
|
echo "This script must be executed from the top-level NuttX build directory"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then
|
||||||
|
export PATH_ORIG="${PATH}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the RIDE
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the RIDE toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the CodeSourcery toolchain in any other location
|
||||||
|
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||||
|
|
||||||
|
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||||
|
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||||
|
# at those locations as well.
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I build the buildroot
|
||||||
|
# toolchain.
|
||||||
|
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
|
||||||
|
# This the the Cygwin path to the location where I built genromfs. If you use
|
||||||
|
# the buildroot toolchain, then genromfs can probably be found in TOOLCHAIN_DIR
|
||||||
|
export GENROMFS_PATH="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
|
||||||
|
# Add the path to the toolchain to the PATH varialble
|
||||||
|
export PATH="${TOOLCHAIN_BIN}:${GENROMFS_PATH}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
@ -1,39 +0,0 @@
|
|||||||
############################################################################
|
|
||||||
# configs/stm32f4discovery/ostest/appconfig
|
|
||||||
#
|
|
||||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
|
||||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
||||||
#
|
|
||||||
# Redistribution and use in source and binary forms, with or without
|
|
||||||
# modification, are permitted provided that the following conditions
|
|
||||||
# are met:
|
|
||||||
#
|
|
||||||
# 1. Redistributions of source code must retain the above copyright
|
|
||||||
# notice, this list of conditions and the following disclaimer.
|
|
||||||
# 2. Redistributions in binary form must reproduce the above copyright
|
|
||||||
# notice, this list of conditions and the following disclaimer in
|
|
||||||
# the documentation and/or other materials provided with the
|
|
||||||
# distribution.
|
|
||||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
||||||
# used to endorse or promote products derived from this software
|
|
||||||
# without specific prior written permission.
|
|
||||||
#
|
|
||||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
||||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
||||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
||||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
||||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
||||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
||||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
||||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
||||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
||||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
||||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
||||||
# POSSIBILITY OF SUCH DAMAGE.
|
|
||||||
#
|
|
||||||
############################################################################
|
|
||||||
|
|
||||||
# Path to example in apps/examples containing the user_start entry point
|
|
||||||
|
|
||||||
CONFIGURED_APPS += examples/ostest
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
127
configs/stm32f4discovery/scripts/gnu-elf.ld
Normal file
127
configs/stm32f4discovery/scripts/gnu-elf.ld
Normal file
@ -0,0 +1,127 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/stm32f4discovery/scripts/gnu-elf.ld
|
||||||
|
*
|
||||||
|
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text 0x00000000 :
|
||||||
|
{
|
||||||
|
_stext = . ;
|
||||||
|
*(.text)
|
||||||
|
*(.text.*)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.stub)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.jcr)
|
||||||
|
|
||||||
|
/* C++ support: The .init and .fini sections contain specific logic
|
||||||
|
* to manage static constructors and destructors.
|
||||||
|
*/
|
||||||
|
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.init)
|
||||||
|
*(.fini)
|
||||||
|
_etext = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
_srodata = . ;
|
||||||
|
*(.rodata)
|
||||||
|
*(.rodata1)
|
||||||
|
*(.rodata.*)
|
||||||
|
*(.gnu.linkonce.r*)
|
||||||
|
_erodata = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
_sdata = . ;
|
||||||
|
*(.data)
|
||||||
|
*(.data1)
|
||||||
|
*(.data.*)
|
||||||
|
*(.gnu.linkonce.d*)
|
||||||
|
_edata = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* C++ support. For each global and static local C++ object,
|
||||||
|
* GCC creates a small subroutine to construct the object. Pointers
|
||||||
|
* to these routines (not the routines themselves) are stored as
|
||||||
|
* simple, linear arrays in the .ctors section of the object file.
|
||||||
|
* Similarly, pointers to global/static destructor routines are
|
||||||
|
* stored in .dtors.
|
||||||
|
*/
|
||||||
|
|
||||||
|
.ctors :
|
||||||
|
{
|
||||||
|
_sctros = . ;
|
||||||
|
*(.ctors)
|
||||||
|
_edtors = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
.ctors :
|
||||||
|
{
|
||||||
|
_sdtors = . ;
|
||||||
|
*(.dtors)
|
||||||
|
_edtors = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
_sbss = . ;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss.*)
|
||||||
|
*(.sbss)
|
||||||
|
*(.sbss.*)
|
||||||
|
*(.gnu.linkonce.b*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue
Block a user