diff --git a/arch/arm/src/lpc43xx/lpc43_uart.c b/arch/arm/src/lpc43xx/lpc43_uart.c index 0aa983de90..9fcdb67d09 100644 --- a/arch/arm/src/lpc43xx/lpc43_uart.c +++ b/arch/arm/src/lpc43xx/lpc43_uart.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/arm/src/lpc43xx/lpc43_uart.c * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Copyright (C) 2012, 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without @@ -60,105 +60,88 @@ * Pre-processor Definitions ****************************************************************************/ -/* Select UART parameters for the selected console */ +#if defined HAVE_UART && defined HAVE_CONSOLE + /* Select UART parameters for the selected console */ -#if defined(CONFIG_USART0_SERIAL_CONSOLE) -# define CONSOLE_BASE LPC43_USART0_BASE -# define CONSOLE_BASEFREQ BOARD_USART0_BASEFREQ -# define CONSOLE_BAUD CONFIG_USART0_BAUD -# define CONSOLE_BITS CONFIG_USART0_BITS -# define CONSOLE_PARITY CONFIG_USART0_PARITY -# define CONSOLE_2STOP CONFIG_USART0_2STOP -#elif defined(CONFIG_UART1_SERIAL_CONSOLE) -# define CONSOLE_BASE LPC43_UART1_BASE -# define CONSOLE_BASEFREQ BOARD_UART1_BASEFREQ -# define CONSOLE_BAUD CONFIG_UART1_BAUD -# define CONSOLE_BITS CONFIG_UART1_BITS -# define CONSOLE_PARITY CONFIG_UART1_PARITY -# define CONSOLE_2STOP CONFIG_UART1_2STOP -#elif defined(CONFIG_USART2_SERIAL_CONSOLE) -# define CONSOLE_BASE LPC43_USART2_BASE -# define CONSOLE_BASEFREQ BOARD_USART2_BASEFREQ -# define CONSOLE_BAUD CONFIG_USART2_BAUD -# define CONSOLE_BITS CONFIG_USART2_BITS -# define CONSOLE_PARITY CONFIG_USART2_PARITY -# define CONSOLE_2STOP CONFIG_USART2_2STOP -#elif defined(CONFIG_USART3_SERIAL_CONSOLE) -# define CONSOLE_BASE LPC43_USART3_BASE -# define CONSOLE_BASEFREQ BOARD_USART3_BASEFREQ -# define CONSOLE_BAUD CONFIG_USART3_BAUD -# define CONSOLE_BITS CONFIG_USART3_BITS -# define CONSOLE_PARITY CONFIG_USART3_PARITY -# define CONSOLE_2STOP CONFIG_USART3_2STOP -#elif defined(HAVE_CONSOLE) -# error "No CONFIG_UARTn_SERIAL_CONSOLE Setting" -#endif +# if defined(CONFIG_USART0_SERIAL_CONSOLE) +# define CONSOLE_BASE LPC43_USART0_BASE +# define CONSOLE_BASEFREQ BOARD_USART0_BASEFREQ +# define CONSOLE_BAUD CONFIG_USART0_BAUD +# define CONSOLE_BITS CONFIG_USART0_BITS +# define CONSOLE_PARITY CONFIG_USART0_PARITY +# define CONSOLE_2STOP CONFIG_USART0_2STOP +# elif defined(CONFIG_UART1_SERIAL_CONSOLE) +# define CONSOLE_BASE LPC43_UART1_BASE +# define CONSOLE_BASEFREQ BOARD_UART1_BASEFREQ +# define CONSOLE_BAUD CONFIG_UART1_BAUD +# define CONSOLE_BITS CONFIG_UART1_BITS +# define CONSOLE_PARITY CONFIG_UART1_PARITY +# define CONSOLE_2STOP CONFIG_UART1_2STOP +# elif defined(CONFIG_USART2_SERIAL_CONSOLE) +# define CONSOLE_BASE LPC43_USART2_BASE +# define CONSOLE_BASEFREQ BOARD_USART2_BASEFREQ +# define CONSOLE_BAUD CONFIG_USART2_BAUD +# define CONSOLE_BITS CONFIG_USART2_BITS +# define CONSOLE_PARITY CONFIG_USART2_PARITY +# define CONSOLE_2STOP CONFIG_USART2_2STOP +# elif defined(CONFIG_USART3_SERIAL_CONSOLE) +# define CONSOLE_BASE LPC43_USART3_BASE +# define CONSOLE_BASEFREQ BOARD_USART3_BASEFREQ +# define CONSOLE_BAUD CONFIG_USART3_BAUD +# define CONSOLE_BITS CONFIG_USART3_BITS +# define CONSOLE_PARITY CONFIG_USART3_PARITY +# define CONSOLE_2STOP CONFIG_USART3_2STOP +# elif defined(HAVE_CONSOLE) +# error "No CONFIG_UARTn_SERIAL_CONSOLE Setting" +# endif -/* Get word length setting for the console */ + /* Get word length setting for the console */ -#if CONSOLE_BITS == 5 -# define CONSOLE_LCR_WLS UART_LCR_WLS_5BIT -#elif CONSOLE_BITS == 6 -# define CONSOLE_LCR_WLS UART_LCR_WLS_6BIT -#elif CONSOLE_BITS == 7 -# define CONSOLE_LCR_WLS UART_LCR_WLS_7BIT -#elif CONSOLE_BITS == 8 -# define CONSOLE_LCR_WLS UART_LCR_WLS_8BIT -#elif defined(HAVE_CONSOLE) -# error "Invalid CONFIG_UARTn_BITS setting for console " -#endif +# if CONSOLE_BITS == 5 +# define CONSOLE_LCR_WLS UART_LCR_WLS_5BIT +# elif CONSOLE_BITS == 6 +# define CONSOLE_LCR_WLS UART_LCR_WLS_6BIT +# elif CONSOLE_BITS == 7 +# define CONSOLE_LCR_WLS UART_LCR_WLS_7BIT +# elif CONSOLE_BITS == 8 +# define CONSOLE_LCR_WLS UART_LCR_WLS_8BIT +# elif defined(HAVE_CONSOLE) +# error "Invalid CONFIG_UARTn_BITS setting for console " +# endif -/* Get parity setting for the console */ + /* Get parity setting for the console */ -#if CONSOLE_PARITY == 0 -# define CONSOLE_LCR_PAR 0 -#elif CONSOLE_PARITY == 1 -# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_ODD) -#elif CONSOLE_PARITY == 2 -# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_EVEN) -#elif CONSOLE_PARITY == 3 -# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_STICK1) -#elif CONSOLE_PARITY == 4 -# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_STICK0) -#elif defined(HAVE_CONSOLE) +# if CONSOLE_PARITY == 0 +# define CONSOLE_LCR_PAR 0 +# elif CONSOLE_PARITY == 1 +# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_ODD) +# elif CONSOLE_PARITY == 2 +# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_EVEN) +# elif CONSOLE_PARITY == 3 +# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_STICK1) +# elif CONSOLE_PARITY == 4 +# define CONSOLE_LCR_PAR (UART_LCR_PE|UART_LCR_PS_STICK0) +# elif defined(HAVE_CONSOLE) # error "Invalid CONFIG_UARTn_PARITY setting for CONSOLE" +# endif + + /* Get stop-bit setting for the console and USART0/2/3, UART1 */ + +# if CONSOLE_2STOP != 0 +# define CONSOLE_LCR_STOP UART_LCR_STOP +# else +# define CONSOLE_LCR_STOP 0 +# endif + + /* LCR and FCR values for the console */ + +# define CONSOLE_LCR_VALUE (CONSOLE_LCR_WLS | CONSOLE_LCR_PAR | \ + CONSOLE_LCR_STOP) +# define CONSOLE_FCR_VALUE (UART_FCR_RXTRIGGER_8 | UART_FCR_TXRST |\ + UART_FCR_RXRST | UART_FCR_FIFOEN) + #endif -/* Get stop-bit setting for the console and USART0/2/3, UART1 */ - -#if CONSOLE_2STOP != 0 -# define CONSOLE_LCR_STOP UART_LCR_STOP -#else -# define CONSOLE_LCR_STOP 0 -#endif - -/* LCR and FCR values for the console */ - -#define CONSOLE_LCR_VALUE (CONSOLE_LCR_WLS | CONSOLE_LCR_PAR | \ - CONSOLE_LCR_STOP) -#define CONSOLE_FCR_VALUE (UART_FCR_RXTRIGGER_8 | UART_FCR_TXRST |\ - UART_FCR_RXRST | UART_FCR_FIFOEN) - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/**************************************************************************** - * Private Function Prototypes - ****************************************************************************/ - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - /**************************************************************************** * Public Functions ****************************************************************************/ diff --git a/configs/bambino-200e/README.txt b/configs/bambino-200e/README.txt index d56e44ab92..b6adcf8096 100644 --- a/configs/bambino-200e/README.txt +++ b/configs/bambino-200e/README.txt @@ -384,6 +384,11 @@ as follow: Where is one of the following: + netnsh: + ------- + Configures the NuttShell (nsh) located at examples/nsh. This + configuration is focused on network testing. + nsh: ---- This configuration is the NuttShell (NSH) example at examples/nsh/. @@ -451,3 +456,49 @@ Where is one of the following: be found on the lpcware.com website. In this build sceneario, you must also provide the patch to the external SPIFI library be defining the make variable EXTRA_LIBS in the top-level Make.defs file. Good luck! + + usbnsh: + ------- + + This is another NSH example. If differs from other 'nsh' configurations + in that this configurations uses a USB serial device for console I/O. + + NOTES: + + 1. This configuration does have UART1 output enabled and set up as + the system logging device: + + CONFIG_SYSLOG_CHAR=y : Use a character device for system logging + CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" : UART1 will be /dev/ttyS0 + + However, there is nothing to generate SYLOG output in the default + configuration so nothing should appear on UART1 unless you enable + some debug output or enable the USB monitor. + + NOTE: Using the SYSLOG to get debug output has limitations. Among + those are that you cannot get debug output from interrupt handlers. + So, in particularly, debug output is not a useful way to debug the + USB device controller driver. Instead, use the USB monitor with + USB debug off and USB trace on (see below). + + 4. Enabling USB monitor SYSLOG output. If tracing is enabled, the USB + device will save encoded trace output in in-memory buffer; if the + USB monitor is enabled, that trace buffer will be periodically + emptied and dumped to the system logging device (UART2 in this + configuration): + + CONFIG_USBDEV_TRACE=y : Enable USB trace feature + CONFIG_USBDEV_TRACE_NRECORDS=128 : Buffer 128 records in memory + CONFIG_NSH_USBDEV_TRACE=n : No builtin tracing from NSH + CONFIG_NSH_ARCHINIT=y : Automatically start the USB monitor + CONFIG_USBMONITOR=y : Enable the USB monitor daemon + CONFIG_USBMONITOR_STACKSIZE=2048 : USB monitor daemon stack size + CONFIG_USBMONITOR_PRIORITY=50 : USB monitor daemon priority + CONFIG_USBMONITOR_INTERVAL=2 : Dump trace data every 2 seconds + + CONFIG_USBMONITOR_TRACEINIT=y : Enable TRACE output + CONFIG_USBMONITOR_TRACECLASS=y + CONFIG_USBMONITOR_TRACETRANSFERS=y + CONFIG_USBMONITOR_TRACECONTROLLER=y + CONFIG_USBMONITOR_TRACEINTERRUPTS=y + diff --git a/configs/bambino-200e/usbnsh/Make.defs b/configs/bambino-200e/usbnsh/Make.defs new file mode 100644 index 0000000000..fa8969212e --- /dev/null +++ b/configs/bambino-200e/usbnsh/Make.defs @@ -0,0 +1,132 @@ +############################################################################ +# configs/bambino-200e/usbnsh/Make.defs +# +# Copyright (C) 2017 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# Alan Carvalho de Assis acassis@gmail.com [nuttx] +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +# Setup for the kind of memory that we are executing from + +ifeq ($(CONFIG_LPC43_BOOT_SRAM),y) + LDSCRIPT = ramconfig.ld +endif +ifeq ($(CONFIG_LPC43_BOOT_SPIFI),y) + LDSCRIPT = spificonfig.ld +endif +ifeq ($(CONFIG_LPC43_BOOT_FLASHA),y) + LDSCRIPT = flashaconfig.ld +endif +ifeq ($(CONFIG_LPC43_BOOT_FLASHB),y) + LDSCRIPT = flashaconfig.ld +endif +ifeq ($(CONFIG_LPC43_BOOT_CS0FLASH),y) + LDSCRIPT = cs0flash.ld +endif + +# Setup for Windows vs Linux/Cygwin/OSX environments + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = .elf + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = + diff --git a/configs/bambino-200e/usbnsh/defconfig b/configs/bambino-200e/usbnsh/defconfig new file mode 100644 index 0000000000..addc5c43b5 --- /dev/null +++ b/configs/bambino-200e/usbnsh/defconfig @@ -0,0 +1,1014 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +CONFIG_APPS_DIR="../apps" +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +CONFIG_ARCH_STDARG_H=y +# CONFIG_ARCH_DEBUG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG_ALERT=y +# CONFIG_DEBUG_FEATURES is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +CONFIG_DEBUG_SYMBOLS=y +CONFIG_ARCH_HAVE_CUSTOMOPT=y +CONFIG_DEBUG_NOOPT=y +# CONFIG_DEBUG_CUSTOMOPT is not set +# CONFIG_DEBUG_FULLOPT is not set + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_MISOC is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_RISCV is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_XTENSA is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX1 is not set +# CONFIG_ARCH_CHIP_IMX6 is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +CONFIG_ARCH_CHIP_LPC43XX=y +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STM32F7 is not set +# CONFIG_ARCH_CHIP_STM32L4 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_CHIP_TMS570 is not set +# CONFIG_ARCH_CHIP_MOXART is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM23 is not set +# CONFIG_ARCH_CORTEXM3 is not set +# CONFIG_ARCH_CORTEXM33 is not set +CONFIG_ARCH_CORTEXM4=y +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +# CONFIG_ARCH_CORTEXA9 is not set +# CONFIG_ARCH_CORTEXR4 is not set +# CONFIG_ARCH_CORTEXR4F is not set +# CONFIG_ARCH_CORTEXR5 is not set +# CONFIG_ARCH_CORTEX5F is not set +# CONFIG_ARCH_CORTEXR7 is not set +# CONFIG_ARCH_CORTEXR7F is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="lpc43xx" +# CONFIG_ARM_TOOLCHAIN_IAR is not set +CONFIG_ARM_TOOLCHAIN_GNU=y +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +CONFIG_ARMV7M_CMNVECTOR=y +# CONFIG_ARMV7M_LAZYFPU is not set +CONFIG_ARCH_HAVE_FPU=y +# CONFIG_ARCH_HAVE_DPFPU is not set +# CONFIG_ARCH_FPU is not set +# CONFIG_ARCH_HAVE_TRUSTZONE is not set +CONFIG_ARM_HAVE_MPU_UNIFIED=y +# CONFIG_ARM_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y +# CONFIG_ARMV7M_HAVE_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# LPC43xx Configuration Options +# +# CONFIG_ARCH_CHIP_LPC4310FBD144 is not set +# CONFIG_ARCH_CHIP_LPC4310FET100 is not set +# CONFIG_ARCH_CHIP_LPC4320FBD144 is not set +# CONFIG_ARCH_CHIP_LPC4320FET100 is not set +CONFIG_ARCH_CHIP_LPC4330FBD144=y +# CONFIG_ARCH_CHIP_LPC4330FET100 is not set +# CONFIG_ARCH_CHIP_LPC4330FET180 is not set +# CONFIG_ARCH_CHIP_LPC4330FET256 is not set +# CONFIG_ARCH_CHIP_LPC4337JBD144 is not set +# CONFIG_ARCH_CHIP_LPC4337JET100 is not set +# CONFIG_ARCH_CHIP_LPC4350FBD208 is not set +# CONFIG_ARCH_CHIP_LPC4350FET180 is not set +# CONFIG_ARCH_CHIP_LPC4350FET256 is not set +# CONFIG_ARCH_CHIP_LPC4353FBD208 is not set +# CONFIG_ARCH_CHIP_LPC4353FET180 is not set +# CONFIG_ARCH_CHIP_LPC4353FET256 is not set +# CONFIG_ARCH_CHIP_LPC4357FET180 is not set +# CONFIG_ARCH_CHIP_LPC4357FBD208 is not set +# CONFIG_ARCH_CHIP_LPC4357FET256 is not set +# CONFIG_ARCH_CHIP_LPC4370FET100 is not set +CONFIG_ARCH_FAMILY_LPC4330=y +# CONFIG_LPC43_BOOT_SRAM is not set +CONFIG_LPC43_BOOT_SPIFI=y +# CONFIG_LPC43_BOOT_FLASHA is not set +# CONFIG_LPC43_BOOT_FLASHB is not set +# CONFIG_LPC43_BOOT_CS0FLASH is not set +# CONFIG_LPC43_BOOT_CS1FLASH is not set +# CONFIG_LPC43_BOOT_CS2FLASH is not set +# CONFIG_LPC43_BOOT_CS3FLASH is not set + +# +# LPC43xx Peripheral Support +# +# CONFIG_LPC43_ADC0 is not set +# CONFIG_LPC43_ADC1 is not set +# CONFIG_LPC43_ATIMER is not set +# CONFIG_LPC43_CAN1 is not set +# CONFIG_LPC43_CAN2 is not set +# CONFIG_LPC43_DAC is not set +# CONFIG_LPC43_EMC is not set +# CONFIG_LPC43_ETHERNET is not set +# CONFIG_LPC43_EVNTMNTR is not set +# CONFIG_LPC43_GPDMA is not set +# CONFIG_LPC43_I2C0 is not set +# CONFIG_LPC43_I2C1 is not set +# CONFIG_LPC43_I2S0 is not set +# CONFIG_LPC43_I2S1 is not set +# CONFIG_LPC43_LCD is not set +# CONFIG_LPC43_MCPWM is not set +# CONFIG_LPC43_QEI is not set +# CONFIG_LPC43_RIT is not set +# CONFIG_LPC43_RTC is not set +# CONFIG_LPC43_SCT is not set +# CONFIG_LPC43_SDMMC is not set +# CONFIG_LPC43_SPI is not set +# CONFIG_LPC43_SPIFI is not set +# CONFIG_LPC43_SSP0 is not set +# CONFIG_LPC43_SSP1 is not set +CONFIG_LPC43_TMR0=y +# CONFIG_LPC43_TMR1 is not set +# CONFIG_LPC43_TMR2 is not set +# CONFIG_LPC43_TMR3 is not set +CONFIG_LPC43_TIMER=y +# CONFIG_LPC43_USART0 is not set +CONFIG_LPC43_UART1=y +# CONFIG_LPC43_USART2 is not set +# CONFIG_LPC43_USART3 is not set +# CONFIG_LPC43_USBOTG is not set +CONFIG_LPC43_USB0=y +# CONFIG_LPC43_USB1 is not set +# CONFIG_LPC43_WWDT is not set +# CONFIG_LPC43_GPIO_IRQ is not set + +# +# Internal Memory Configuration +# +CONFIG_ARCH_HAVE_AHB_SRAM_BANK1=y +# CONFIG_LPC43_USE_LOCSRAM_BANK1 is not set +# CONFIG_LPC43_USE_AHBSRAM_BANK0 is not set +# CONFIG_LPC43_USE_AHBSRAM_BANK1 is not set +# CONFIG_LPC43_HEAP_AHBSRAM_BANK2 is not set + +# +# External Memory Configuration +# + +# +# RS-485 Configuration +# +# CONFIG_UART1_RS485MODE is not set +# CONFIG_UART1_RS485_DTRDIR is not set + +# +# USB device controller driver (DCD) options +# +# CONFIG_LPC43_USB0DEV_NOVBUS is not set + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +# CONFIG_ARCH_HAVE_MULTICPU is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +CONFIG_ARCH_HAVE_EXTCLK=y +# CONFIG_ARCH_HAVE_POWEROFF is not set +CONFIG_ARCH_HAVE_RESET=y +# CONFIG_ARCH_USE_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=18535 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x10000000 +CONFIG_RAM_SIZE=131072 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_BAMBINO_200E=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="bambino-200e" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +# CONFIG_ARCH_BUTTONS is not set +CONFIG_ARCH_HAVE_IRQBUTTONS=y + +# +# Board-Specific Options +# +# CONFIG_BOARD_CRASHDUMP is not set +CONFIG_LIB_BOARDCTL=y +# CONFIG_BOARDCTL_RESET is not set +# CONFIG_BOARDCTL_UNIQUEID is not set +CONFIG_BOARDCTL_USBDEVCTRL=y +# CONFIG_BOARDCTL_TSCTEST is not set +# CONFIG_BOARDCTL_GRAPHICS is not set +# CONFIG_BOARDCTL_IOCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# +CONFIG_ARCH_HAVE_TICKLESS=y +# CONFIG_SCHED_TICKLESS is not set +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEMTICK_EXTCLK is not set +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_ARCH_HAVE_TIMEKEEPING is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2012 +CONFIG_START_MONTH=7 +CONFIG_START_DAY=11 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_WDOG_INTRESERVE=0 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_SPINLOCK is not set +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=0 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 +# CONFIG_PTHREAD_CLEANUP is not set +# CONFIG_CANCELLATION_POINTS is not set + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +# CONFIG_DEV_CONSOLE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_HPWORK is not set +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +# CONFIG_DISABLE_POLL is not set +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_URANDOM is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +# CONFIG_ARCH_HAVE_I2CRESET is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set +# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set +# CONFIG_ARCH_HAVE_SPI_BITORDER is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_ONESHOT is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set + +# +# IO Expander/GPIO Support +# +# CONFIG_IOEXPANDER is not set +# CONFIG_DEV_GPIO is not set + +# +# LCD Driver Support +# +# CONFIG_LCD is not set +# CONFIG_SLCD is not set + +# +# LED Support +# +# CONFIG_USERLED is not set +# CONFIG_RGBLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_NCP5623C is not set +# CONFIG_MMCSD is not set +# CONFIG_MODEM is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +CONFIG_SERIAL_REMOVABLE=y +# CONFIG_SERIAL_CONSOLE is not set +# CONFIG_16550_UART is not set +# CONFIG_UART_SERIALDRIVER is not set +# CONFIG_UART0_SERIALDRIVER is not set +CONFIG_UART1_SERIALDRIVER=y +# CONFIG_UART2_SERIALDRIVER is not set +# CONFIG_UART3_SERIALDRIVER is not set +# CONFIG_UART4_SERIALDRIVER is not set +# CONFIG_UART5_SERIALDRIVER is not set +# CONFIG_UART6_SERIALDRIVER is not set +# CONFIG_UART7_SERIALDRIVER is not set +# CONFIG_UART8_SERIALDRIVER is not set +# CONFIG_SCI0_SERIALDRIVER is not set +# CONFIG_SCI1_SERIALDRIVER is not set +# CONFIG_USART0_SERIALDRIVER is not set +# CONFIG_USART1_SERIALDRIVER is not set +# CONFIG_USART2_SERIALDRIVER is not set +# CONFIG_USART3_SERIALDRIVER is not set +# CONFIG_USART4_SERIALDRIVER is not set +# CONFIG_USART5_SERIALDRIVER is not set +# CONFIG_USART6_SERIALDRIVER is not set +# CONFIG_USART7_SERIALDRIVER is not set +# CONFIG_USART8_SERIALDRIVER is not set +# CONFIG_OTHER_UART_SERIALDRIVER is not set +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_SERIAL_NPOLLWAITERS=2 +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +# CONFIG_UART1_SERIAL_CONSOLE is not set +# CONFIG_OTHER_SERIAL_CONSOLE is not set +CONFIG_NO_SERIAL_CONSOLE=y + +# +# UART1 Configuration +# +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART1_BAUD=115200 +CONFIG_UART1_BITS=8 +CONFIG_UART1_PARITY=0 +CONFIG_UART1_2STOP=0 +# CONFIG_UART1_IFLOWCONTROL is not set +# CONFIG_UART1_OFLOWCONTROL is not set +# CONFIG_UART1_DMA is not set +# CONFIG_PSEUDOTERM is not set +CONFIG_USBDEV=y + +# +# USB Device Controller Driver Options +# +# CONFIG_USBDEV_ISOCHRONOUS is not set +# CONFIG_USBDEV_DUALSPEED is not set +CONFIG_USBDEV_SELFPOWERED=y +# CONFIG_USBDEV_BUSPOWERED is not set +CONFIG_USBDEV_MAXPOWER=100 +# CONFIG_USBDEV_DMA is not set +# CONFIG_ARCH_USBDEV_STALLQUEUE is not set +# CONFIG_USBDEV_TRACE is not set + +# +# USB Device Class Driver Options +# +# CONFIG_USBDEV_COMPOSITE is not set +# CONFIG_PL2303 is not set +CONFIG_CDCACM=y +CONFIG_CDCACM_CONSOLE=y +CONFIG_CDCACM_EP0MAXPACKET=64 +CONFIG_CDCACM_EPINTIN=1 +CONFIG_CDCACM_EPINTIN_FSSIZE=64 +CONFIG_CDCACM_EPINTIN_HSSIZE=64 +CONFIG_CDCACM_EPBULKOUT=3 +CONFIG_CDCACM_EPBULKOUT_FSSIZE=64 +CONFIG_CDCACM_EPBULKOUT_HSSIZE=512 +CONFIG_CDCACM_EPBULKIN=2 +CONFIG_CDCACM_EPBULKIN_FSSIZE=64 +CONFIG_CDCACM_EPBULKIN_HSSIZE=512 +CONFIG_CDCACM_NRDREQS=4 +CONFIG_CDCACM_NWRREQS=4 +CONFIG_CDCACM_BULKIN_REQLEN=96 +CONFIG_CDCACM_RXBUFSIZE=257 +CONFIG_CDCACM_TXBUFSIZE=193 +CONFIG_CDCACM_VENDORID=0x0525 +CONFIG_CDCACM_PRODUCTID=0xa4a7 +CONFIG_CDCACM_VENDORSTR="NuttX" +CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial" +# CONFIG_USBMSC is not set +# CONFIG_USBHOST is not set +# CONFIG_HAVE_USBTRACE is not set +# CONFIG_DRIVERS_WIRELESS is not set +# CONFIG_DRIVERS_CONTACTLESS is not set + +# +# System Logging +# +# CONFIG_ARCH_SYSLOG is not set +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_INTBUFFER is not set +# CONFIG_SYSLOG_TIMESTAMP is not set +# CONFIG_SYSLOG_SERIAL_CONSOLE is not set +CONFIG_SYSLOG_CHAR=y +# CONFIG_SYSLOG_NONE is not set +# CONFIG_SYSLOG_FILE is not set +CONFIG_SYSLOG_CHAR_CRLF=y +CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" +# CONFIG_SYSLOG_CHARDEV is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_PSEUDOFS_SOFTLINKS is not set +CONFIG_FS_READABLE=y +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +CONFIG_FS_PROCFS=y +# CONFIG_FS_PROCFS_REGISTER is not set + +# +# Exclude individual procfs entries +# +# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set +# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set +# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set +# CONFIG_FS_UNIONFS is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Wireless Support +# + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +# CONFIG_STDIO_DISABLE_BUFFERING is not set +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBC_DLLFCN is not set +# CONFIG_LIBC_MODLIB is not set +# CONFIG_LIBM is not set +# CONFIG_LIBC_ARCH_MEMCPY is not set +# CONFIG_LIBC_ARCH_MEMCMP is not set +# CONFIG_LIBC_ARCH_MEMMOVE is not set +# CONFIG_LIBC_ARCH_MEMSET is not set +# CONFIG_LIBC_ARCH_STRCHR is not set +# CONFIG_LIBC_ARCH_STRCMP is not set +# CONFIG_LIBC_ARCH_STRCPY is not set +# CONFIG_LIBC_ARCH_STRNCPY is not set +# CONFIG_LIBC_ARCH_STRLEN is not set +# CONFIG_LIBC_ARCH_STRNLEN is not set +# CONFIG_LIBC_ARCH_BZERO is not set +# CONFIG_LIBC_ARCH_ELF is not set +# CONFIG_ARMV7M_MEMCPY is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_SCANSET is not set +# CONFIG_LIBC_IOCTL_VARIADIC is not set +# CONFIG_LIBC_WCHAR is not set +# CONFIG_LIBC_LOCALE is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_MEMCPY_VIK is not set +# CONFIG_MEMSET_OPTSPEED is not set +CONFIG_ARCH_HAVE_TLS=y +# CONFIG_TLS is not set +# CONFIG_LIBC_IPv4_ADDRCONV is not set +# CONFIG_LIBC_IPv6_ADDRCONV is not set +# CONFIG_LIBC_NETDB is not set +# CONFIG_NETDB_HOSTFILE is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_CRC64_FAST is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set +# CONFIG_LIB_HEX2BIN is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CCTYPE is not set +# CONFIG_EXAMPLES_CHAT is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PCA9635 is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_RFID_READUID is not set +# CONFIG_EXAMPLES_RGBLED is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMP is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WEBSERVER is not set + +# +# File System Utilities +# +# CONFIG_FSUTILS_INIFILE is not set +# CONFIG_FSUTILS_PASSWD is not set + +# +# GPS Utilities +# +# CONFIG_GPSUTILS_MINMEA_LIB is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_BAS is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set +# CONFIG_INTERPRETERS_MINIBASIC is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CHAT is not set +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_ESP8266 is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +# CONFIG_NSH_MOTD is not set + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_BASENAME is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_DIRNAME is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_IFUPDOWN is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_PRINTF=y +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TIME is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Configure Command Options +# +CONFIG_NSH_CMDOPT_DF_H=y +# CONFIG_NSH_CMDOPT_DD_STATS is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_CMDOPT_HEXDUMP=y +CONFIG_NSH_PROC_MOUNTPOINT="/proc" +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_USBCONSOLE is not set +# CONFIG_NSH_ALTCONDEV is not set +CONFIG_NSH_ARCHINIT=y +# CONFIG_NSH_LOGIN is not set +# CONFIG_NSH_CONSOLE_LOGIN is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_CDCACM is not set +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_READLINE_TABCOMPLETION is not set +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_SYSTEM is not set +# CONFIG_SYSTEM_TEE is not set +# CONFIG_SYSTEM_UBLOXMODEM is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/bambino-200e/usbnsh/setenv.sh b/configs/bambino-200e/usbnsh/setenv.sh new file mode 100644 index 0000000000..74cf761d89 --- /dev/null +++ b/configs/bambino-200e/usbnsh/setenv.sh @@ -0,0 +1,96 @@ +#!/bin/bash +# configs/bambino-200e/usbnsh/setenv.sh +# +# Copyright (C) 2017 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# Alan Carvalho de Assis acassis@gmail.com [nuttx] +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the Code Red +# toolchain under windows. You will have to edit this if you install the +# Code Red toolchain in any other location or if you install a different +# version +#export TOOLCHAIN_BIN="/cygdrive/c/code_red/RedSuite_4.2.3_379/redsuite/Tools/bin" +#export SCRIPT_BIN="/cygdrive/c/code_red/RedSuite_4.2.3_379/redsuite/bin" +#export SCRIPT_BIN="/cygdrive/c/nxp/LPCXpresso_4.2.3_292/lpcxpresso/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +#export SCRIPT_BIN= + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" +#export SCRIPT_BIN= + +# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors" +# You can this free toolchain here https://launchpad.net/gcc-arm-embedded +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" +#export SCRIPT_BIN= + +# And add the selected toolchain path[s] to the PATH variable + +export PATH="/sbin:/usr/sbin:${PATH_ORIG}" + +if [ ! -z ${SCRIPT_BIN} ]; then + export PATH="${SCRIPT_BIN}:${PATH}" +fi + +export PATH="${TOOLCHAIN_BIN}:${PATH}" +echo "PATH : ${PATH}" + +# Set an alias that can be used to put the LPC43xx in boot mode + +alias lpc43xx='${SCRIPT_BIN}/Scripts/bootLPCXpresso.cmd winusb'