sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Shenzhou board uses RMII PHY interface, not MII

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5176 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-09-22 16:48:44 +00:00
parent 9058b0e2e0
commit 1ddf9f6306
3 changed files with 15 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
configs/shenzhou/README.txt
View File

@ -560,9 +560,9 @@ Shenzhou-specific Configuration Options
CONFIG_STM32_PHYADDR - The 5-bit address of the PHY on the board
CONFIG_STM32_MII - Support Ethernet MII interface
CONFIG_STM32_MII_MCO1 - Use MCO1 to clock the MII interface
CONFIG_STM32_MII_MCO2 - Use MCO2 to clock the MII interface
CONFIG_STM32_MII_MCO - Use MCO to clock the MII interface
CONFIG_STM32_RMII - Support Ethernet RMII interface
CONFIG_STM32_RMII_MCO - Use MCO to clock the RMII interface
CONFIG_STM32_AUTONEG - Use PHY autonegotion to determine speed and mode
CONFIG_STM32_ETHFD - If CONFIG_STM32_AUTONEG is not defined, then this
may be defined to select full duplex mode. Default: half-duplex

14
configs/shenzhou/include/board.h
View File

@ -166,9 +166,9 @@
* -- ---- -------------- ----------------------------------------------------------
* PN NAME SIGNAL NOTES
* -- ---- -------------- ----------------------------------------------------------
* 24 PA1 MII_RX_CLK Ethernet PHY
* RMII_REF_CLK Ethernet PHY
* 25 PA2 MII_MDIO Ethernet PHY
* 24 PA1 MII_RX_CLK Ethernet PHY NOTE: Despite the MII labeling of these
* RMII_REF_CLK Ethernet PHY signals, the DM916AEP is actually configured
* 25 PA2 MII_MDIO Ethernet PHY to work in RMII mode.
* 48 PB11 MII_TX_EN Ethernet PHY
* 51 PB12 MII_TXD0 Ethernet PHY
* 52 PB13 MII_TXD1 Ethernet PHY
@ -186,11 +186,11 @@
# ifndef CONFIG_STM32_ETH_REMAP
# error "STM32 Ethernet requires CONFIG_STM32_ETH_REMAP"
# endif
# ifndef CONFIG_STM32_MII
# error "STM32 Ethernet requires CONFIG_STM32_MII"
# ifndef CONFIG_STM32_RMII
# error "STM32 Ethernet requires CONFIG_STM32_RMII"
# endif
# ifndef CONFIG_STM32_MII_MCO
# error "STM32 Ethernet requires CONFIG_STM32_MII_MCO"
# ifndef CONFIG_STM32_RMII_MCO
# error "STM32 Ethernet requires CONFIG_STM32_RMII_MCO"
# endif
#endif

9
configs/shenzhou/nsh/defconfig
View File

@ -161,7 +161,7 @@ CONFIG_STM32_JTAG_FULL_ENABLE=y
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
# CONFIG_STM32_JTAG_SW_ENABLE is not set
# CONFIG_STM32_FORCEPOWER is not set
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set`
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
#
# SPI Configuration
@ -173,8 +173,8 @@ CONFIG_STM32_JTAG_FULL_ENABLE=y
# Ethernet MAC configuration
#
CONFIG_STM32_PHYADDR=1
CONFIG_STM32_MII=y
CONFIG_STM32_MII_MCO=y
# CONFIG_STM32_MII is not set
# CONFIG_STM32_MII_MCO is not set
# CONFIG_STM32_MII_EXTCLK is not set
CONFIG_STM32_AUTONEG=y
CONFIG_STM32_PHYSR=16
@ -183,6 +183,9 @@ CONFIG_STM32_PHYSR_100MBPS=0x0000
CONFIG_STM32_PHYSR_MODE=0x0004
CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
# CONFIG_STM32_ETH_PTP is not set
CONFIG_STM32_RMII=y
CONFIG_STM32_RMII_MCO=y
# CONFIG_STM32_RMII_EXTCLK is not set
#
# USB Host Configuration