sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

OLED almost works

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2679 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-05-16 02:35:14 +00:00
parent 7f47029021
commit 2023634f84
3 changed files with 53 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
configs/lm3s6965-ek/nx/defconfig
View File

@ -594,7 +594,7 @@ CONFIG_NX_MXCLIENTMSGS=16
# The latter limitation effectively reduces the 128x96 disply to 64x96.
CONFIG_LCD_P14201=y
CONFIG_P14201_SPIMODE=2
CONFIG_P14201_FREQUENCY=20000000
CONFIG_P14201_FREQUENCY=3500000
CONFIG_P14201_NINTERFACES=1
CONFIG_P14201_FRAMEBUFFER=y

1
configs/lm3s6965-ek/src/up_ssi.c
View File

@ -137,6 +137,7 @@ void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool select
{
ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
ssi_dumpgpio("lm3s_spiselect() Entry");
if (devid == SPIDEV_MMCSD)
{
/* Assert the CS pin to the card */

69
drivers/lcd/p14201.c
View File

@ -552,6 +552,7 @@ static void rit_deselect(FAR struct spi_dev_s *spi)
* None
*
* Assumptions:
* The caller as selected the OLED device.
*
**************************************************************************************/
@ -565,15 +566,11 @@ static void rit_sndbytes(FAR struct rit_dev_s *priv, FAR const uint8_t *buffer,
buflen, data ? "YES" : "NO", buffer[0], buffer[1], buffer[2] );
DEBUGASSERT(spi);
/* Select the SD1329 controller */
rit_select(spi);
/* Clear the D/Cn bit to enable command mode */
/* Clear the D/Cn bit to enable command or data mode */
rit_seldata(0, data);
/* Loop until the entire command is transferred */
/* Loop until the entire command/data block is transferred */
while (buflen-- > 0)
{
@ -581,15 +578,7 @@ static void rit_sndbytes(FAR struct rit_dev_s *priv, FAR const uint8_t *buffer,
tmp = *buffer++;
(void)SPI_SEND(spi, tmp);
/* Send a dummy byte */
(void)SPI_SEND(spi, 0xff);
}
/* De-select the SD1329 controller */
rit_deselect(spi);
}
/**************************************************************************************
@ -635,6 +624,9 @@ static void rit_sndcmds(FAR struct rit_dev_s *priv, FAR const uint8_t *table)
* npixels - The number of pixels to write to the LCD
* (range: 0 < npixels <= xres-col)
*
* Assumptions:
* Caller has selected the OLED section.
*
**************************************************************************************/
#ifdef CONFIG_P14201_FRAMEBUFFER
@ -829,6 +821,10 @@ static int rit_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
}
}
/* Select the SD1329 controller */
rit_select(priv->spi);
/* Setup a window that describes a run starting at the specified column
* and row, and ending at the column + npixels on the same row.
*/
@ -848,6 +844,9 @@ static int rit_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
rit_sndcmd(priv, g_horzinc, sizeof(g_horzinc));
rit_snddata(priv, &run[start], aend - start);
/* De-select the SD1329 controller */
rit_deselect(priv->spi);
return OK;
}
#else
@ -872,6 +871,10 @@ static int rit_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
DEBUGASSERT((col & 1) == 0 && (npixels & 1) == 0);
/* Select the SD1329 controller */
rit_select(priv->spi);
/* Setup a window that describes a run starting at the specified column
* and row, and ending at the column + npixels on the same row.
*/
@ -890,6 +893,10 @@ static int rit_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
rit_sndcmd(priv, g_horzinc, sizeof(g_horzinc));
rit_snddata(priv, buffer, npixels >> 1);
/* De-select the SD1329 controller */
rit_deselect(priv->spi);
}
return OK;
}
@ -1079,6 +1086,13 @@ static int rit_setpower(struct lcd_dev_s *dev, int power)
DEBUGASSERT(priv && (unsigned)power <= CONFIG_LCD_MAXPOWER && priv->spi);
gvdbg("power: %d\n", power);
/* Select the SD1329 controller */
rit_select(priv->spi);
/* Only two power settings -- 0: sleep on, 1: sleep off */
if (power > 0)
{
/* Re-initialize the SSD1329 controller */
@ -1087,7 +1101,7 @@ static int rit_setpower(struct lcd_dev_s *dev, int power)
/* Take the display out of sleep mode */
rit_sndcmd(priv, g_sleepoff, sizeof(g_sleepon));
rit_sndcmd(priv, g_sleepoff, sizeof(g_sleepoff));
}
else
{
@ -1095,7 +1109,11 @@ static int rit_setpower(struct lcd_dev_s *dev, int power)
rit_sndcmd(priv, g_sleepon, sizeof(g_sleepon));
}
return -ENOSYS; /* Not implemented */
/* De-select the SD1329 controller */
rit_deselect(priv->spi);
return OK;
}
/**************************************************************************************
@ -1130,6 +1148,10 @@ static int rit_setcontrast(struct lcd_dev_s *dev, unsigned int contrast)
gvdbg("contrast: %d\n", contrast);
DEBUGASSERT(contrast <= CONFIG_LCD_MAXCONTRAST);
/* Select the SD1329 controller */
rit_select(priv->spi);
/* Set new contrast */
cmd[0] = SSD1329_SET_CONTRAST;
@ -1137,6 +1159,9 @@ static int rit_setcontrast(struct lcd_dev_s *dev, unsigned int contrast)
cmd[2] = SSD1329_NOOP;
rit_sndcmd(priv, cmd, 3);
/* De-select the SD1329 controller */
rit_deselect(priv->spi);
priv->contrast = contrast;
return OK;
}
@ -1179,14 +1204,22 @@ FAR struct lcd_dev_s *rit_initialize(FAR struct spi_dev_s *spi, unsigned int dev
priv->contrast = RIT_CONTRAST;
priv->on = false;
/* Configure and enable LCD */
/* Select the SD1329 controller */
rit_configspi(spi);
rit_sndcmds(priv, g_initcmds);
rit_select(spi);
/* Clear the display */
rit_clear(priv);
/* Configure (but don't enable) the OLED */
rit_sndcmds(priv, g_initcmds);
/* De-select the SD1329 controller */
rit_deselect(spi);
return &priv->dev;
}
#endif /* CONFIG_LCD_P14201 */