Refresh SAM4E-EK configurations
This commit is contained in:
Gregory Nutt
parent
8e84282c05
commit
22eab59fb9
@ -1300,7 +1300,7 @@ Configurations
|
||||
configuration settings above in the section entitled "Networking").
|
||||
|
||||
NOTE: In boot-up sequence is very simple in this example; all
|
||||
initialization is done sequential (vs. in parallel) and so you will
|
||||
initialization is done sequentially (vs. in parallel) and so you will
|
||||
not see the NSH prompt until all initialization is complete. The
|
||||
network bring-up in particular will add some delay before the NSH
|
||||
prompt appears. In a real application, you would probably want to
|
||||
@ -1309,7 +1309,7 @@ Configurations
|
||||
|
||||
This delay will be especially long if the board is not connected to
|
||||
a network because additional time will be required to fail with
|
||||
timeout errors.
|
||||
timeout errors. This delay can be eliminated, however, if you enable an NSH initialization option as described above in a paragraph entitled, "Network Initialization Thread."
|
||||
|
||||
STATUS:
|
||||
2014-3-13: The basic NSH serial console is working. Network support
|
||||
@ -1357,18 +1357,11 @@ Configurations
|
||||
does not mount on either the Linux or Windows host. This
|
||||
needs to be retested.
|
||||
|
||||
8. This configuration can be used to verify the touchscreen on on the
|
||||
SAM4E-EK LCD. See the instructions above in the paragraph entitled
|
||||
"Touchscreen".
|
||||
|
||||
STATUS:
|
||||
2014-3-21: The touchscreen has not yet been tested.
|
||||
|
||||
9. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card
|
||||
8. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card
|
||||
slot. Support for the SD slot can be enabled following the
|
||||
instructions provided above in the paragraph entitled "HSMCI."
|
||||
|
||||
11. This configuration has been used for verifying the touchscreen on
|
||||
9. This configuration has been used for verifying the touchscreen on
|
||||
on the SAM4E-EK LCD module.
|
||||
|
||||
The NSH configuration can be used to verify the ADS7843E touchscreen on
|
||||
@ -1415,7 +1408,7 @@ Configurations
|
||||
CONFIG_DEBUG_VERBOSE=y : Enable verbose debug output
|
||||
CONFIG_DEBUG_INPUT=y : Enable debug output from input devices
|
||||
|
||||
11. This configuration can be re-configured to test the on-board LCD
|
||||
10. This configuration can be re-configured to test the on-board LCD
|
||||
module.
|
||||
|
||||
System Type -> AT91SAM3/4 Configuration Options
|
||||
@ -1445,8 +1438,8 @@ Configurations
|
||||
|
||||
Graphics Support -> Font Selections
|
||||
CONFIG_NXFONTS_CHARBITS=7
|
||||
CONFIG_NXFONT_SANS22X29B=y
|
||||
CONFIG_NXFONT_SANS23X27=y
|
||||
CONFIG_NXFONT_SANS22X29B=y
|
||||
|
||||
Application Configuration -> Examples
|
||||
CONFIG_EXAMPLES_NXLINES=y
|
||||
|
||||
@ -12,10 +12,6 @@ CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
# CONFIG_WINDOWS_CYGWIN is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
@ -30,6 +26,7 @@ CONFIG_HOST_LINUX=y
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
# CONFIG_UBOOT_UIMAGE is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
@ -109,16 +106,10 @@ CONFIG_ARCH_HAVE_MPU=y
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
|
||||
CONFIG_ARCH_HAVE_EXTNAND=y
|
||||
CONFIG_ARCH_HAVE_EXTNOR=y
|
||||
CONFIG_ARCH_HAVE_EXTSRAM0=y
|
||||
@ -140,6 +131,7 @@ CONFIG_ARCH_HAVE_EXTSRAM1=y
|
||||
# CONFIG_ARCH_CHIP_ATSAM3X4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3A8C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3A4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4CMP16B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set
|
||||
@ -169,6 +161,7 @@ CONFIG_ARCH_CHIP_ATSAM4E16E=y
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3X is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3A is not set
|
||||
# CONFIG_ARCH_CHIP_SAM4CM is not set
|
||||
# CONFIG_ARCH_CHIP_SAM4L is not set
|
||||
CONFIG_ARCH_CHIP_SAM4E=y
|
||||
# CONFIG_ARCH_CHIP_SAM4S is not set
|
||||
@ -256,6 +249,7 @@ CONFIG_SAM34_EMAC_PHYSR_100HD=0x2
|
||||
CONFIG_SAM34_EMAC_PHYSR_10FD=0x5
|
||||
CONFIG_SAM34_EMAC_PHYSR_100FD=0x6
|
||||
CONFIG_SAM34_EMAC_ISETH0=y
|
||||
# CONFIG_SAM34_TC is not set
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
@ -264,11 +258,13 @@ CONFIG_SAM34_EMAC_ISETH0=y
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
CONFIG_ARCH_DMA=y
|
||||
CONFIG_ARCH_HAVE_IRQPRIO=y
|
||||
# CONFIG_ARCH_L2CACHE is not set
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
# CONFIG_ARCH_HAVE_MMU is not set
|
||||
# CONFIG_ARCH_NAND_HWECC is not set
|
||||
# CONFIG_ARCH_HAVE_EXTCLK is not set
|
||||
# CONFIG_ARCH_IRQPRIO is not set
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
@ -337,29 +333,6 @@ CONFIG_SAM4EEK_AT25_FTL=y
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_USEC_PER_TICK=10000
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2014
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_START_DAY=10
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
@ -367,6 +340,63 @@ CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
# CONFIG_DISABLE_ENVIRON is not set
|
||||
|
||||
#
|
||||
# Clocks and Timers
|
||||
#
|
||||
CONFIG_USEC_PER_TICK=10000
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
# CONFIG_CLOCK_MONOTONIC is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2014
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_START_DAY=10
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=32
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Tasks and Scheduling
|
||||
#
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_MAX_TASKS=16
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
|
||||
#
|
||||
# Pthread Options
|
||||
#
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
|
||||
#
|
||||
# Performance Monitoring
|
||||
#
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
|
||||
#
|
||||
# Files and I/O
|
||||
#
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
|
||||
#
|
||||
# RTOS hooks
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
@ -376,19 +406,10 @@ CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
# POSIX Message Queue Options
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=32
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
@ -405,6 +426,12 @@ CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
|
||||
#
|
||||
# Buffering
|
||||
#
|
||||
# CONFIG_DRVR_WRITEBUFFER is not set
|
||||
# CONFIG_DRVR_READAHEAD is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||
@ -419,6 +446,7 @@ CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_I2S is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_TIMER is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_VIDEO_DEVICES is not set
|
||||
@ -435,7 +463,6 @@ CONFIG_MTD=y
|
||||
# CONFIG_MTD_SECT512 is not set
|
||||
# CONFIG_MTD_BYTE_WRITE is not set
|
||||
# CONFIG_MTD_CONFIG is not set
|
||||
# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
|
||||
|
||||
#
|
||||
# MTD Device Drivers
|
||||
@ -474,10 +501,12 @@ CONFIG_NETDEVICES=y
|
||||
#
|
||||
# External Ethernet PHY Device Support
|
||||
#
|
||||
# CONFIG_ARCH_PHY_INTERRUPT is not set
|
||||
# CONFIG_ETH0_PHY_NONE is not set
|
||||
# CONFIG_ETH0_PHY_AM79C874 is not set
|
||||
# CONFIG_ETH0_PHY_KS8721 is not set
|
||||
CONFIG_ETH0_PHY_KSZ8051=y
|
||||
# CONFIG_ETH0_PHY_KSZ8081 is not set
|
||||
# CONFIG_ETH0_PHY_KSZ90x1 is not set
|
||||
# CONFIG_ETH0_PHY_DP83848C is not set
|
||||
# CONFIG_ETH0_PHY_LAN8720 is not set
|
||||
@ -569,17 +598,33 @@ CONFIG_NET=y
|
||||
# CONFIG_NET_NOINTS is not set
|
||||
# CONFIG_NET_MULTIBUFFER is not set
|
||||
# CONFIG_NET_PROMISCUOUS is not set
|
||||
CONFIG_NET_BUFSIZE=562
|
||||
CONFIG_NET_RECEIVE_WINDOW=536
|
||||
CONFIG_NET_GUARDSIZE=2
|
||||
|
||||
#
|
||||
# Socket Support
|
||||
#
|
||||
CONFIG_NSOCKET_DESCRIPTORS=8
|
||||
CONFIG_NET_NACTIVESOCKETS=16
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
# CONFIG_NET_SOLINGER is not set
|
||||
CONFIG_NET_BUFSIZE=562
|
||||
# CONFIG_NET_TCPURGDATA is not set
|
||||
|
||||
#
|
||||
# Network Device Operations
|
||||
#
|
||||
# CONFIG_NETDEV_PHY_IOCTL is not set
|
||||
|
||||
#
|
||||
# Raw Socket Support
|
||||
#
|
||||
# CONFIG_NET_PKT is not set
|
||||
|
||||
#
|
||||
# TCP/IP Networking
|
||||
#
|
||||
CONFIG_NET_TCP=y
|
||||
# CONFIG_NET_TCPURGDATA is not set
|
||||
CONFIG_NET_TCP_CONNS=16
|
||||
CONFIG_NET_MAX_LISTENPORTS=16
|
||||
CONFIG_NET_TCP_READAHEAD=y
|
||||
@ -597,20 +642,48 @@ CONFIG_NET_UDP_CHECKSUMS=y
|
||||
CONFIG_NET_UDP_CONNS=8
|
||||
CONFIG_NET_BROADCAST=y
|
||||
# CONFIG_NET_RXAVAIL is not set
|
||||
|
||||
#
|
||||
# ICMP Networking Support
|
||||
#
|
||||
CONFIG_NET_ICMP=y
|
||||
CONFIG_NET_ICMP_PING=y
|
||||
# CONFIG_NET_PINGADDRCONF is not set
|
||||
|
||||
#
|
||||
# IGMPv2 Client Support
|
||||
#
|
||||
# CONFIG_NET_IGMP is not set
|
||||
# CONFIG_NET_STATISTICS is not set
|
||||
CONFIG_NET_RECEIVE_WINDOW=536
|
||||
|
||||
#
|
||||
# ARP Configuration
|
||||
#
|
||||
CONFIG_NET_ARP=y
|
||||
CONFIG_NET_ARPTAB_SIZE=16
|
||||
CONFIG_NET_ARP_MAXAGE=120
|
||||
# CONFIG_NET_ARP_IPIN is not set
|
||||
|
||||
#
|
||||
# Network I/O Buffer Support
|
||||
#
|
||||
CONFIG_NET_IOB=y
|
||||
CONFIG_IOB_NBUFFERS=24
|
||||
CONFIG_IOB_BUFSIZE=196
|
||||
CONFIG_IOB_NCHAINS=8
|
||||
CONFIG_IOB_THROTTLE=0
|
||||
# CONFIG_NET_ARCH_INCR32 is not set
|
||||
# CONFIG_NET_ARCH_CHKSUM is not set
|
||||
# CONFIG_NET_STATISTICS is not set
|
||||
|
||||
#
|
||||
# Routing Table Configuration
|
||||
#
|
||||
# CONFIG_NET_ROUTE is not set
|
||||
CONFIG_NET_ETHERNET=y
|
||||
|
||||
#
|
||||
# Crypto API
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
@ -620,6 +693,7 @@ CONFIG_IOB_THROTTLE=0
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_AUTOMOUNTER is not set
|
||||
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
|
||||
CONFIG_FS_READABLE=y
|
||||
CONFIG_FS_WRITABLE=y
|
||||
@ -698,6 +772,7 @@ CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_LIBC_LOCALTIME is not set
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
@ -730,6 +805,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_CPUHOG is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
@ -740,7 +816,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
@ -757,13 +832,14 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERIALBLASTER is not set
|
||||
# CONFIG_EXAMPLES_SERIALRX is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
@ -815,6 +891,7 @@ CONFIG_NETUTILS_NETLIB=y
|
||||
CONFIG_NETUTILS_WEBCLIENT=y
|
||||
CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
|
||||
# CONFIG_NETUTILS_WEBSERVER is not set
|
||||
# CONFIG_NETUTILS_NTPCLIENT is not set
|
||||
# CONFIG_NETUTILS_DISCOVER is not set
|
||||
# CONFIG_NETUTILS_XMLRPC is not set
|
||||
|
||||
@ -827,8 +904,20 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
|
||||
#
|
||||
# Command Line Configuration
|
||||
#
|
||||
CONFIG_NSH_READLINE=y
|
||||
# CONFIG_NSH_CLE is not set
|
||||
CONFIG_NSH_LINELEN=64
|
||||
# CONFIG_NSH_DISABLE_SEMICOLON is not set
|
||||
CONFIG_NSH_CMDPARMS=y
|
||||
CONFIG_NSH_TMPDIR="/tmp"
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_ARGCAT=y
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
@ -884,24 +973,37 @@ CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_CMDOPT_HEXDUMP=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
# CONFIG_NSH_DISABLE_SEMICOLON is not set
|
||||
CONFIG_NSH_CMDPARMS=y
|
||||
CONFIG_NSH_TMPDIR="/tmp"
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_ARGCAT=y
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
|
||||
#
|
||||
# Scripting Support
|
||||
#
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLE_ITEF is not set
|
||||
# CONFIG_NSH_DISABLE_LOOPS is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
# Console Configuration
|
||||
#
|
||||
# CONFIG_NSH_ALTCONDEV is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
|
||||
#
|
||||
# Networking Configuration
|
||||
#
|
||||
# CONFIG_NSH_NETINIT_THREAD is not set
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
# CONFIG_NSH_DNS is not set
|
||||
CONFIG_NSH_NOMAC=y
|
||||
CONFIG_NSH_SWMAC=y
|
||||
# CONFIG_NSH_ARCHMAC is not set
|
||||
CONFIG_NSH_MACADDR=0x00e0deadbeef
|
||||
CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
|
||||
#
|
||||
# Telnet Configuration
|
||||
#
|
||||
CONFIG_NSH_TELNET=y
|
||||
CONFIG_NSH_TELNETD_PORT=23
|
||||
CONFIG_NSH_TELNETD_DAEMONPRIO=100
|
||||
@ -910,12 +1012,6 @@ CONFIG_NSH_TELNETD_CLIENTPRIO=100
|
||||
CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
# CONFIG_NSH_TELNET_LOGIN is not set
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
# CONFIG_NSH_DNS is not set
|
||||
CONFIG_NSH_NOMAC=y
|
||||
CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
@ -950,6 +1046,11 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
#
|
||||
# CONFIG_SYSTEM_FLASH_ERASEALL is not set
|
||||
|
||||
#
|
||||
# Intel HEX to binary conversion
|
||||
#
|
||||
# CONFIG_SYSTEM_HEX2BIN is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
@ -975,6 +1076,14 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# P-Code Support
|
||||
#
|
||||
|
||||
#
|
||||
# PHY Tool
|
||||
#
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
@ -990,6 +1099,11 @@ CONFIG_READLINE_ECHO=y
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sudoku
|
||||
#
|
||||
# CONFIG_SYSTEM_SUDOKU is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
|
||||
@ -52,6 +52,7 @@ fi
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
|
||||
@ -12,10 +12,6 @@ CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
# CONFIG_WINDOWS_CYGWIN is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
@ -30,6 +26,7 @@ CONFIG_HOST_LINUX=y
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
# CONFIG_UBOOT_UIMAGE is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
@ -109,16 +106,10 @@ CONFIG_ARCH_HAVE_MPU=y
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
|
||||
# CONFIG_ARMV7M_OABI_TOOLCHAIN is not set
|
||||
CONFIG_ARCH_HAVE_EXTNAND=y
|
||||
CONFIG_ARCH_HAVE_EXTNOR=y
|
||||
@ -141,6 +132,7 @@ CONFIG_ARCH_HAVE_EXTSRAM1=y
|
||||
# CONFIG_ARCH_CHIP_ATSAM3X4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3A8C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3A4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4CMP16B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set
|
||||
@ -170,6 +162,7 @@ CONFIG_ARCH_CHIP_ATSAM4E16E=y
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3X is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3A is not set
|
||||
# CONFIG_ARCH_CHIP_SAM4CM is not set
|
||||
# CONFIG_ARCH_CHIP_SAM4L is not set
|
||||
CONFIG_ARCH_CHIP_SAM4E=y
|
||||
# CONFIG_ARCH_CHIP_SAM4S is not set
|
||||
@ -261,6 +254,7 @@ CONFIG_SAM34_EMAC_ISETH0=y
|
||||
#
|
||||
# AT91SAM3/4 USB Full Speed Device Controller driver (DCD) options
|
||||
#
|
||||
# CONFIG_SAM34_TC is not set
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
@ -269,11 +263,13 @@ CONFIG_SAM34_EMAC_ISETH0=y
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
CONFIG_ARCH_DMA=y
|
||||
CONFIG_ARCH_HAVE_IRQPRIO=y
|
||||
# CONFIG_ARCH_L2CACHE is not set
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
# CONFIG_ARCH_HAVE_MMU is not set
|
||||
# CONFIG_ARCH_NAND_HWECC is not set
|
||||
# CONFIG_ARCH_HAVE_EXTCLK is not set
|
||||
# CONFIG_ARCH_IRQPRIO is not set
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
@ -342,29 +338,6 @@ CONFIG_SAM4EEK_AT25_FTL=y
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_USEC_PER_TICK=10000
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2014
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_START_DAY=22
|
||||
# CONFIG_DEV_CONSOLE is not set
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
@ -372,6 +345,63 @@ CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
# CONFIG_DISABLE_ENVIRON is not set
|
||||
|
||||
#
|
||||
# Clocks and Timers
|
||||
#
|
||||
CONFIG_USEC_PER_TICK=10000
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
# CONFIG_CLOCK_MONOTONIC is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2014
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_START_DAY=22
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=32
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Tasks and Scheduling
|
||||
#
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_MAX_TASKS=16
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
|
||||
#
|
||||
# Pthread Options
|
||||
#
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
|
||||
#
|
||||
# Performance Monitoring
|
||||
#
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
|
||||
#
|
||||
# Files and I/O
|
||||
#
|
||||
# CONFIG_DEV_CONSOLE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
|
||||
#
|
||||
# RTOS hooks
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
@ -381,19 +411,10 @@ CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
# POSIX Message Queue Options
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=32
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
@ -410,6 +431,12 @@ CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
|
||||
#
|
||||
# Buffering
|
||||
#
|
||||
# CONFIG_DRVR_WRITEBUFFER is not set
|
||||
# CONFIG_DRVR_READAHEAD is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||
@ -424,6 +451,7 @@ CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_I2S is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_TIMER is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_VIDEO_DEVICES is not set
|
||||
@ -440,7 +468,6 @@ CONFIG_MTD=y
|
||||
# CONFIG_MTD_SECT512 is not set
|
||||
# CONFIG_MTD_BYTE_WRITE is not set
|
||||
# CONFIG_MTD_CONFIG is not set
|
||||
# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
|
||||
|
||||
#
|
||||
# MTD Device Drivers
|
||||
@ -479,10 +506,12 @@ CONFIG_NETDEVICES=y
|
||||
#
|
||||
# External Ethernet PHY Device Support
|
||||
#
|
||||
# CONFIG_ARCH_PHY_INTERRUPT is not set
|
||||
# CONFIG_ETH0_PHY_NONE is not set
|
||||
# CONFIG_ETH0_PHY_AM79C874 is not set
|
||||
# CONFIG_ETH0_PHY_KS8721 is not set
|
||||
CONFIG_ETH0_PHY_KSZ8051=y
|
||||
# CONFIG_ETH0_PHY_KSZ8081 is not set
|
||||
# CONFIG_ETH0_PHY_KSZ90x1 is not set
|
||||
# CONFIG_ETH0_PHY_DP83848C is not set
|
||||
# CONFIG_ETH0_PHY_LAN8720 is not set
|
||||
@ -493,7 +522,6 @@ CONFIG_ETH0_PHY_KSZ8051=y
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
CONFIG_SERIAL_REMOVABLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
# CONFIG_ARCH_HAVE_UART is not set
|
||||
@ -524,9 +552,6 @@ CONFIG_ARCH_HAVE_USART1=y
|
||||
CONFIG_USART1_ISUART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
# CONFIG_UART0_SERIAL_CONSOLE is not set
|
||||
# CONFIG_USART1_SERIAL_CONSOLE is not set
|
||||
CONFIG_NO_SERIAL_CONSOLE=y
|
||||
|
||||
#
|
||||
# UART0 Configuration
|
||||
@ -615,17 +640,33 @@ CONFIG_NET=y
|
||||
# CONFIG_NET_NOINTS is not set
|
||||
# CONFIG_NET_MULTIBUFFER is not set
|
||||
# CONFIG_NET_PROMISCUOUS is not set
|
||||
CONFIG_NET_BUFSIZE=562
|
||||
CONFIG_NET_RECEIVE_WINDOW=536
|
||||
CONFIG_NET_GUARDSIZE=2
|
||||
|
||||
#
|
||||
# Socket Support
|
||||
#
|
||||
CONFIG_NSOCKET_DESCRIPTORS=8
|
||||
CONFIG_NET_NACTIVESOCKETS=16
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
# CONFIG_NET_SOLINGER is not set
|
||||
CONFIG_NET_BUFSIZE=562
|
||||
# CONFIG_NET_TCPURGDATA is not set
|
||||
|
||||
#
|
||||
# Network Device Operations
|
||||
#
|
||||
# CONFIG_NETDEV_PHY_IOCTL is not set
|
||||
|
||||
#
|
||||
# Raw Socket Support
|
||||
#
|
||||
# CONFIG_NET_PKT is not set
|
||||
|
||||
#
|
||||
# TCP/IP Networking
|
||||
#
|
||||
CONFIG_NET_TCP=y
|
||||
# CONFIG_NET_TCPURGDATA is not set
|
||||
CONFIG_NET_TCP_CONNS=16
|
||||
CONFIG_NET_MAX_LISTENPORTS=16
|
||||
CONFIG_NET_TCP_READAHEAD=y
|
||||
@ -643,20 +684,48 @@ CONFIG_NET_UDP_CHECKSUMS=y
|
||||
CONFIG_NET_UDP_CONNS=8
|
||||
CONFIG_NET_BROADCAST=y
|
||||
# CONFIG_NET_RXAVAIL is not set
|
||||
|
||||
#
|
||||
# ICMP Networking Support
|
||||
#
|
||||
CONFIG_NET_ICMP=y
|
||||
CONFIG_NET_ICMP_PING=y
|
||||
# CONFIG_NET_PINGADDRCONF is not set
|
||||
|
||||
#
|
||||
# IGMPv2 Client Support
|
||||
#
|
||||
# CONFIG_NET_IGMP is not set
|
||||
# CONFIG_NET_STATISTICS is not set
|
||||
CONFIG_NET_RECEIVE_WINDOW=536
|
||||
|
||||
#
|
||||
# ARP Configuration
|
||||
#
|
||||
CONFIG_NET_ARP=y
|
||||
CONFIG_NET_ARPTAB_SIZE=16
|
||||
CONFIG_NET_ARP_MAXAGE=120
|
||||
# CONFIG_NET_ARP_IPIN is not set
|
||||
|
||||
#
|
||||
# Network I/O Buffer Support
|
||||
#
|
||||
CONFIG_NET_IOB=y
|
||||
CONFIG_IOB_NBUFFERS=24
|
||||
CONFIG_IOB_BUFSIZE=196
|
||||
CONFIG_IOB_NCHAINS=8
|
||||
CONFIG_IOB_THROTTLE=0
|
||||
# CONFIG_NET_ARCH_INCR32 is not set
|
||||
# CONFIG_NET_ARCH_CHKSUM is not set
|
||||
# CONFIG_NET_STATISTICS is not set
|
||||
|
||||
#
|
||||
# Routing Table Configuration
|
||||
#
|
||||
# CONFIG_NET_ROUTE is not set
|
||||
CONFIG_NET_ETHERNET=y
|
||||
|
||||
#
|
||||
# Crypto API
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
@ -666,6 +735,7 @@ CONFIG_IOB_THROTTLE=0
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_AUTOMOUNTER is not set
|
||||
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
|
||||
CONFIG_FS_READABLE=y
|
||||
CONFIG_FS_WRITABLE=y
|
||||
@ -746,6 +816,7 @@ CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_LIBC_LOCALTIME is not set
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
@ -778,6 +849,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_CPUHOG is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
@ -788,7 +860,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
@ -805,13 +876,14 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERIALBLASTER is not set
|
||||
# CONFIG_EXAMPLES_SERIALRX is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
@ -863,6 +935,7 @@ CONFIG_NETUTILS_NETLIB=y
|
||||
CONFIG_NETUTILS_WEBCLIENT=y
|
||||
CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
|
||||
# CONFIG_NETUTILS_WEBSERVER is not set
|
||||
# CONFIG_NETUTILS_NTPCLIENT is not set
|
||||
# CONFIG_NETUTILS_DISCOVER is not set
|
||||
# CONFIG_NETUTILS_XMLRPC is not set
|
||||
|
||||
@ -875,8 +948,20 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
|
||||
#
|
||||
# Command Line Configuration
|
||||
#
|
||||
CONFIG_NSH_READLINE=y
|
||||
# CONFIG_NSH_CLE is not set
|
||||
CONFIG_NSH_LINELEN=64
|
||||
# CONFIG_NSH_DISABLE_SEMICOLON is not set
|
||||
CONFIG_NSH_CMDPARMS=y
|
||||
CONFIG_NSH_TMPDIR="/tmp"
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_ARGCAT=y
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
@ -932,25 +1017,38 @@ CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_CMDOPT_HEXDUMP=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
# CONFIG_NSH_DISABLE_SEMICOLON is not set
|
||||
CONFIG_NSH_CMDPARMS=y
|
||||
CONFIG_NSH_TMPDIR="/tmp"
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_ARGCAT=y
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
|
||||
#
|
||||
# Scripting Support
|
||||
#
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLE_ITEF is not set
|
||||
# CONFIG_NSH_DISABLE_LOOPS is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
# CONFIG_NSH_USBCONSOLE is not set
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
# Console Configuration
|
||||
#
|
||||
# CONFIG_NSH_ALTCONDEV is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
# CONFIG_NSH_USBCONSOLE is not set
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
|
||||
#
|
||||
# Networking Configuration
|
||||
#
|
||||
# CONFIG_NSH_NETINIT_THREAD is not set
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
# CONFIG_NSH_DNS is not set
|
||||
CONFIG_NSH_NOMAC=y
|
||||
CONFIG_NSH_SWMAC=y
|
||||
# CONFIG_NSH_ARCHMAC is not set
|
||||
CONFIG_NSH_MACADDR=0x00e0deadbeef
|
||||
CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
|
||||
#
|
||||
# Telnet Configuration
|
||||
#
|
||||
CONFIG_NSH_TELNET=y
|
||||
CONFIG_NSH_TELNETD_PORT=23
|
||||
CONFIG_NSH_TELNETD_DAEMONPRIO=100
|
||||
@ -959,12 +1057,6 @@ CONFIG_NSH_TELNETD_CLIENTPRIO=100
|
||||
CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
# CONFIG_NSH_TELNET_LOGIN is not set
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
# CONFIG_NSH_DNS is not set
|
||||
CONFIG_NSH_NOMAC=y
|
||||
CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
@ -999,6 +1091,11 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
#
|
||||
# CONFIG_SYSTEM_FLASH_ERASEALL is not set
|
||||
|
||||
#
|
||||
# Intel HEX to binary conversion
|
||||
#
|
||||
# CONFIG_SYSTEM_HEX2BIN is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
@ -1024,6 +1121,14 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# P-Code Support
|
||||
#
|
||||
|
||||
#
|
||||
# PHY Tool
|
||||
#
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
@ -1039,6 +1144,11 @@ CONFIG_READLINE_ECHO=y
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sudoku
|
||||
#
|
||||
# CONFIG_SYSTEM_SUDOKU is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
|
||||
@ -52,6 +52,7 @@ fi
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
|
||||
Loading…
Reference in New Issue
Block a user