Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
This commit is contained in:
Gregory Nutt
parent
05759e0721
commit
22fefb59da
@ -6173,4 +6173,5 @@
|
||||
* arch/arm/include/a1x and src/a1x: Directory structure to support
|
||||
the Allwinner A10. Not much there on the initial check-in
|
||||
(2013-12-7).
|
||||
|
||||
* configs/pcduino-a10: Directory structure for the pcDuino board. This
|
||||
board is based on the Allwinner A10 (2013-12-7).
|
||||
|
||||
@ -145,8 +145,10 @@
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/p112/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- pcblogic-pic32mx/
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/pcblogic-pic32mx/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- pcduino-a10/
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/pcduino-pic32mx/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- pic32-starterkit/
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/pic32-starterkit/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/pic32-a10/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- pic32mx7mmb/
|
||||
| | | `- <a href="http://sourceforge.net/p/nuttx/git/ci/master/tree/nuttx/configs/pic32mx7mmb/README.txt"><b><i>README.txt</i></b></a>
|
||||
| | |- pirelli_dpl10/
|
||||
|
||||
@ -1073,6 +1073,8 @@ nuttx
|
||||
| | `- README.txt
|
||||
| |- pcblogic-pic32mx/
|
||||
| | `- README.txt
|
||||
| |- pcduino-a10/
|
||||
| | `- README.txt
|
||||
| |- pic32-starterkit/
|
||||
| | `- README.txt
|
||||
| |- pic32mx7mmb/
|
||||
|
||||
@ -16,4 +16,21 @@ config ARCH_CHIP_A10
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Boot device"
|
||||
default A1X_BOOT_SDCARD
|
||||
|
||||
config A1X_BOOT_NAND
|
||||
bool "NAND FLASH"
|
||||
|
||||
config A1X_BOOT_SPINOR
|
||||
bool "SPI NOR FLASH"
|
||||
|
||||
config A1X_BOOT_SDCARD
|
||||
bool "SD card"
|
||||
|
||||
config A1X_BOOT_USB
|
||||
bool "USB"
|
||||
|
||||
endchoice # Boot device
|
||||
endif # ARCH_CHIP_A1X
|
||||
|
||||
@ -459,6 +459,16 @@ config ARCH_BOARD_PCBLOGICPIC32MX
|
||||
STATUS: Code complete but testing has been stalled due to tool related problems
|
||||
(PICkit 2 does not work with the PIC32).
|
||||
|
||||
config ARCH_BOARD_PCDUINO_A10
|
||||
bool "pcDuino A10"
|
||||
depends on ARCH_CHIP_A10
|
||||
---help---
|
||||
This is the port of NuttX to the Allwinner A10-based pcDuino v1
|
||||
board. See http://www.pcduino.com/ for information about pcDuino Lite, v1,
|
||||
and v2. I have not compared these boards in detail, but I believe that
|
||||
the differences are cosmetic. This port was developed on the v1 board,
|
||||
but the others may be compatible.
|
||||
|
||||
config ARCH_BOARD_PIC32_STARTERKIT
|
||||
bool "Microchip PIC32 Ethernet Starter Kit (DM320004)"
|
||||
depends on ARCH_CHIP_PIC32MX795F512L
|
||||
@ -873,6 +883,7 @@ config ARCH_BOARD
|
||||
default "open1788" if ARCH_BOARD_OPEN1788
|
||||
default "p112" if ARCH_BOARD_P112
|
||||
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
||||
default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10
|
||||
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
||||
default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB
|
||||
default "pirelli_dpl10" if ARCH_BOARD_PIRELLI_DPL10
|
||||
@ -1100,6 +1111,9 @@ endif
|
||||
if ARCH_BOARD_PCBLOGICPIC32MX
|
||||
source "configs/pcblogic-pic32mx/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_PCDUINO_A10
|
||||
source "configs/pcduino-a10/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_PIC32_STARTERKIT
|
||||
source "configs/pic32-starterkit/Kconfig"
|
||||
endif
|
||||
|
||||
@ -1913,6 +1913,14 @@ configs/pcblogic-pic32mx
|
||||
STATUS: Code complete but testing has been stalled due to tool related problems
|
||||
(PICkit 2 does not work with the PIC32).
|
||||
|
||||
configs/pcduino-a10
|
||||
This directory contains the port of NuttX to the pcDuino v1 board
|
||||
See http://www.pcduino.com/ for information about pcDuino Lite, v1,
|
||||
and v2. These boards are based around the Allwinner A10 Cortex-A8 CPU.
|
||||
I have not compared these boards in detail, but I believe that the
|
||||
differences are cosmetic. This port was developed on the v1 board, but
|
||||
the others may be compatible.
|
||||
|
||||
configs/p112
|
||||
The P112 is notable because it was the first of the hobbyist single board
|
||||
computers to reach the production stage. The P112 hobbyist computers
|
||||
|
||||
7
configs/pcduino-a10/Kconfig
Normal file
7
configs/pcduino-a10/Kconfig
Normal file
@ -0,0 +1,7 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
|
||||
if ARCH_BOARD_PCDUINO_A10
|
||||
endif # ARCH_BOARD_PCDUINO_A10
|
||||
117
configs/pcduino-a10/README.txt
Normal file
117
configs/pcduino-a10/README.txt
Normal file
@ -0,0 +1,117 @@
|
||||
README
|
||||
======
|
||||
|
||||
This directory contains the port of NuttX to the pcDuino v1 board
|
||||
See http://www.pcduino.com/ for information about pcDuino Lite, v1,
|
||||
and v2. These boards are based around the Allwinner A10 Cortex-A8 CPU.
|
||||
I have not compared these boards in detail, but I believe that the
|
||||
differences are cosmetic. This port was developed on the v1 board, but
|
||||
the others may be compatible:
|
||||
|
||||
pcDuino Lite (See http://www.pcduino.com/?page_id=1707)
|
||||
|
||||
ITEMS DETAILS
|
||||
-------------------- ---------------------------------------------------
|
||||
CPU 1GHz ARM Cortex A8
|
||||
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
|
||||
DRAM 512B
|
||||
Onboard Storage NO Flash, microSD card (TF) slot for up to 32GB
|
||||
Video Output HDMI
|
||||
Extension Interface 2.54mm Headers
|
||||
Network interface 10/100Mbps RJ45 and USB WiFi extension (not included)
|
||||
Power 5V, 2000mA
|
||||
Overall Size 125mm X 52mm
|
||||
|
||||
pcDuino v1 (http://www.pcduino.com/?page_id=12)
|
||||
|
||||
ITEMS DETAILS
|
||||
-------------------- ---------------------------------------------------
|
||||
Items Details
|
||||
CPU 1GHz ARM Cortex A8
|
||||
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
|
||||
* DRAM 1GB
|
||||
* Onboard Storage 2GB Flash, microSD card (TF) slot for up to 32GB
|
||||
Video Output HDMI
|
||||
Extension Interface 2.54mm Headers
|
||||
Network interface 10/100Mbps RJ45 and USB WiFi extension (not included)
|
||||
Power 5V, 2000mA
|
||||
Overall Size 125mm X 52mm
|
||||
|
||||
pcDuino v2 (http://www.pcduino.com/?page_id=1618)
|
||||
|
||||
ITEMS DETAILS
|
||||
-------------------- ---------------------------------------------------
|
||||
Items Details
|
||||
CPU 1GHz ARM Cortex A8
|
||||
GPU OpenGL ES2.0, OpenVG 1.1 Mali 400 core
|
||||
DRAM 1GB
|
||||
Onboard Storage 2GB Flash, microSD card (TF) slot for up to 32GB
|
||||
Video Output HDMI
|
||||
* Extension Interface Arduino Headers
|
||||
* Network interface 10/100Mbps RJ45 and on-board WiFi module
|
||||
Power 5V, 2000mA
|
||||
Overall Size 125mm X 52mm
|
||||
|
||||
Main features of the Allwinner A10
|
||||
(See http://www.allwinnertech.com/en/product/a10.html):
|
||||
|
||||
CPU
|
||||
- ARM Cortex™-A8
|
||||
- 32KB I-Cache
|
||||
- 32KB D-Cache
|
||||
- 256KB L2 Cache
|
||||
|
||||
GPU
|
||||
- ARM Mali-400
|
||||
|
||||
Video
|
||||
- UHD 2160P video decoding
|
||||
- 3D video decoding
|
||||
- Support various video decoding formats, including VP8, AVS, H. 264
|
||||
MVC, VC-1, MPEG-1,2,4, etc
|
||||
- H.264 HP video encoding up to 1080p @ 30 fps or dual-channel 720p @ 30
|
||||
fps
|
||||
|
||||
Display
|
||||
- Multi-channel HD display
|
||||
- Integrated HDMI 1.4
|
||||
- YPbPr, CVBS, VGA
|
||||
- Multiple LCD interfaces, including CPU, RGB, LVDS up to Full HD
|
||||
|
||||
Memory
|
||||
- 32-bit DDR2/DDR3
|
||||
- Memory capacity up to 16G bits
|
||||
- SLC/MLC/TLC/DDR NAND
|
||||
- 8 flash chips, 64-bit ECC
|
||||
|
||||
Memory capacity up to 64GB
|
||||
Support NAND of 5xnm, 4xnm, 3xnm, 2xnm, etc
|
||||
Support NAND of Samsung, Toshiba, Hynix, etc
|
||||
|
||||
Boot Devices
|
||||
- NAND Flash
|
||||
- SPI NOR Flash
|
||||
- SD Card
|
||||
- USB
|
||||
|
||||
Contents
|
||||
========
|
||||
|
||||
- Serial Console
|
||||
- LEDs
|
||||
- Buttons
|
||||
|
||||
Serial Console
|
||||
==============
|
||||
|
||||
To be provided
|
||||
|
||||
LEDs
|
||||
====
|
||||
|
||||
To be provided
|
||||
|
||||
Buttons
|
||||
=======
|
||||
|
||||
To be provided
|
||||
165
configs/pcduino-a10/include/board.h
Normal file
165
configs/pcduino-a10/include/board.h
Normal file
@ -0,0 +1,165 @@
|
||||
/************************************************************************************
|
||||
* configs/pcduino-a10/include/board.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_PCDUINO_A10_INCLUDE_BOARD_H
|
||||
#define __CONFIGS_PCDUINO_A10_INCLUDE_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
#warning Missing Logic
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
#warning Missing Logic
|
||||
|
||||
/* Button definitions ***************************************************************/
|
||||
#warning Missing Logic
|
||||
|
||||
/* NAND *****************************************************************************/
|
||||
#warning Missing Logic
|
||||
|
||||
/* GPIO configuration ***************************************************************/
|
||||
#warning Missing Logic
|
||||
|
||||
/************************************************************************************
|
||||
* Assembly Language Macros
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef __ASSEMBLY__
|
||||
.macro config_sdram
|
||||
.endm
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: a1x_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All A1X architectures must provide the following entry point. This entry
|
||||
* point point is called early in the initialization -- after all memory has been
|
||||
* configured and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void a1x_boardinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: a1x_setled, and a1x_setleds
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
|
||||
* CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
|
||||
* control the LEDs from user applications.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
void a1x_setled(int led, bool ledon);
|
||||
void a1x_setleds(uint8_t ledset);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: up_buttoninit
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After that,
|
||||
* up_buttons() may be called to collect the current state of all buttons or
|
||||
* up_irqbutton() may be called to register button interrupt handlers.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
void up_buttoninit(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: up_buttons
|
||||
*
|
||||
* Description:
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to collect
|
||||
* the state of all buttons. up_buttons() returns an 8-bit bit set with each bit
|
||||
* associated with a button. See the BUTTON* definitions above for the meaning of
|
||||
* each bit in the returned value.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
uint8_t up_buttons(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: up_irqbutton
|
||||
*
|
||||
* Description:
|
||||
* This function may be called to register an interrupt handler that will be
|
||||
* called when a button is depressed or released. The ID value is one of the
|
||||
* BUTTON* definitions provided above. The previous interrupt handler address is
|
||||
* returned (so that it may restored, if so desired).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
|
||||
#endif
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* !__ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_PCDUINO_A10_INCLUDE_BOARD_H */
|
||||
119
configs/pcduino-a10/nsh/Make.defs
Normal file
119
configs/pcduino-a10/nsh/Make.defs
Normal file
@ -0,0 +1,119 @@
|
||||
############################################################################
|
||||
# configs/pcduino-a10/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
|
||||
|
||||
LDSCRIPT = sdram.ld
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCPUFLAGS = -mcpu=cortex-a8 -mfpu=vfpv4-d16
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
ifeq ($(CONFIG_HOST_WINDOWS),y)
|
||||
HOSTEXEEXT = .exe
|
||||
else
|
||||
HOSTEXEEXT =
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native host tools
|
||||
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||
else
|
||||
# Linux/Cygwin-native host tools
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||
endif
|
||||
|
||||
666
configs/pcduino-a10/nsh/defconfig
Normal file
666
configs/pcduino-a10/nsh/defconfig
Normal file
@ -0,0 +1,666 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
CONFIG_ARCH_HAVE_STACKCHECK=y
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
CONFIG_ARCH_CHIP_A1X=y
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAMA5 is not set
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
# CONFIG_ARCH_ARM7TDMI is not set
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
# CONFIG_ARCH_CORTEXM3 is not set
|
||||
# CONFIG_ARCH_CORTEXM4 is not set
|
||||
# CONFIG_ARCH_CORTEXA5 is not set
|
||||
CONFIG_ARCH_CORTEXA8=y
|
||||
CONFIG_ARCH_FAMILY="armv7-a"
|
||||
CONFIG_ARCH_CHIP="a1x"
|
||||
CONFIG_ARCH_HAVE_FPU=y
|
||||
CONFIG_ARCH_FPU=y
|
||||
# CONFIG_ARCH_HAVE_MPU is not set
|
||||
CONFIG_ARCH_HAVE_LOWVECTORS=y
|
||||
CONFIG_ARCH_LOWVECTORS=y
|
||||
CONFIG_PGTABLE_VADDR=0x20000000
|
||||
# CONFIG_ARCH_ROMPGTABLE is not set
|
||||
# CONFIG_PAGING is not set
|
||||
|
||||
#
|
||||
# ARMv7-A Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
|
||||
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_HAVE_MMU=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=49341
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=2048
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Boot Memory Configuration
|
||||
#
|
||||
CONFIG_RAM_START=0x00304000
|
||||
CONFIG_RAM_VSTART=0x00304000
|
||||
CONFIG_RAM_SIZE=114688
|
||||
CONFIG_FLASH_START=0x10000000
|
||||
CONFIG_FLASH_VSTART=0x10000000
|
||||
CONFIG_FLASH_SIZE=134217728
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_PCDUINO_A10=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="pcduino-a10"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
# CONFIG_ARCH_BUTTONS is not set
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=32
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2013
|
||||
CONFIG_START_MONTH=7
|
||||
CONFIG_START_DAY=31
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=16
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART1=y
|
||||
|
||||
#
|
||||
# USART Configuration
|
||||
#
|
||||
CONFIG_USART1_ISUART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_USART1_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART1 Configuration
|
||||
#
|
||||
CONFIG_USART1_RXBUFSIZE=256
|
||||
CONFIG_USART1_TXBUFSIZE=256
|
||||
CONFIG_USART1_BAUD=115200
|
||||
CONFIG_USART1_BITS=8
|
||||
CONFIG_USART1_PARITY=0
|
||||
CONFIG_USART1_2STOP=0
|
||||
# CONFIG_USART1_IFLOWCONTROL is not set
|
||||
# CONFIG_USART1_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_FAT_LCNAMES=y
|
||||
CONFIG_FAT_LFN=y
|
||||
CONFIG_FAT_MAXFNAME=32
|
||||
# CONFIG_FS_FATTIME is not set
|
||||
# CONFIG_FAT_DMAMEMORY is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_BINFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=1
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
CONFIG_BUILTIN=y
|
||||
# CONFIG_PIC is not set
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
# CONFIG_UCLIBCXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
# CONFIG_NSH_DISABLE_ADDROUTE is not set
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
# CONFIG_NSH_DISABLE_CMP is not set
|
||||
# CONFIG_NSH_DISABLE_DD is not set
|
||||
# CONFIG_NSH_DISABLE_DELROUTE is not set
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
# CONFIG_NSH_DISABLE_MKFATFS is not set
|
||||
# CONFIG_NSH_DISABLE_MKFIFO is not set
|
||||
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PING is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=80
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
# CONFIG_NSH_ARCHINIT is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# USB CDC/ACM Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# USB Composite Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# Stack Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# USB Mass Storage Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Zmodem Commands
|
||||
#
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
76
configs/pcduino-a10/nsh/setenv.sh
Executable file
76
configs/pcduino-a10/nsh/setenv.sh
Executable file
@ -0,0 +1,76 @@
|
||||
#!/bin/bash
|
||||
# configs/pcduino-a10/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
98
configs/pcduino-a10/src/Makefile
Normal file
98
configs/pcduino-a10/src/Makefile
Normal file
@ -0,0 +1,98 @@
|
||||
############################################################################
|
||||
# configs/pcduino-a10/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = a1x_boot.c a2x_leds.c
|
||||
|
||||
ifeq ($(CONFIG_HAVE_CXX),y)
|
||||
CSRCS += a1x_cxxinitialize.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
||||
CSRCS += a1x_nsh.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
||||
CSRCS += a1x_buttons.c
|
||||
endif
|
||||
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}"
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/common}"
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-a}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/common
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/armv7-a
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
-include Make.dep
|
||||
100
configs/pcduino-a10/src/a1x_boot.c
Normal file
100
configs/pcduino-a10/src/a1x_boot.c
Normal file
@ -0,0 +1,100 @@
|
||||
/************************************************************************************
|
||||
* configs/pcduino-a10/src/a1x_boot.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include "pcduino_a10.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: a1x_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All A1x architectures must provide the following entry point. This entry
|
||||
* point is called early in the initialization -- after all memory has been
|
||||
* configured and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void a1x_boardinitialize(void)
|
||||
{
|
||||
/* Configure on-board LEDs. */
|
||||
|
||||
a1x_led_initialize();
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_initialize
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
|
||||
* initialization call will be performed in the boot-up sequence to a
|
||||
* function called board_initialize(). board_initialize() will be
|
||||
* called immediately after up_intiialize() is called and just before the
|
||||
* initial application is started. This additional initialization phase
|
||||
* may be used, for example, to initialize board-specific device drivers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_BOARD_INITIALIZE
|
||||
void board_initialize(void)
|
||||
{
|
||||
/* Perform NSH initialization here instead of from the NSH. This
|
||||
* alternative NSH initialization is necessary when NSH is ran in user-space
|
||||
* but the initialization function must run in kernel space.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
|
||||
(void)nsh_archinitialize();
|
||||
#endif
|
||||
}
|
||||
#endif /* CONFIG_BOARD_INITIALIZE */
|
||||
154
configs/pcduino-a10/src/a1x_buttons.c
Normal file
154
configs/pcduino-a10/src/a1x_buttons.c
Normal file
@ -0,0 +1,154 @@
|
||||
/****************************************************************************
|
||||
* configs/pcduino-a10/src/a1x_buttons.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <nuttx/irq.h>
|
||||
|
||||
#include <arch/irq.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "pcduino_a10.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
static xcpt_t g_irqbutton[BOARD_NBUTTONS];
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttoninit
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After
|
||||
* that, up_buttons() may be called to collect the current state of all
|
||||
* buttons or up_irqbutton() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void up_buttoninit(void)
|
||||
{
|
||||
# warning Missing logic
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttons
|
||||
*
|
||||
* Description:
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to
|
||||
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON* definitions
|
||||
* above for the meaning of each bit in the returned value.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t up_buttons(void)
|
||||
{
|
||||
# warning Missing logic
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_irqbutton
|
||||
*
|
||||
* Description:
|
||||
* This function may be called to register an interrupt handler that will
|
||||
* be called when a button is depressed or released. The ID value is one
|
||||
* of the BUTTON* definitions provided above. The previous interrupt
|
||||
* handler address isreturned (so that it may restored, if so desired).
|
||||
*
|
||||
* Configuration Notes:
|
||||
* Configuration CONFIG_ARCH_IRQBUTTONS must be selected to enable the
|
||||
* overall GPIO IRQ feature.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
xcpt_t up_irqbutton(int id, xcpt_t irqhandler)
|
||||
{
|
||||
xcpt_t oldhandler = NULL;
|
||||
|
||||
if (id < BOARD_NBUTTONS)
|
||||
{
|
||||
irqstate_t flags;
|
||||
|
||||
/* Disable interrupts until we are done. This guarantees that the
|
||||
* following operations are atomic.
|
||||
*/
|
||||
|
||||
flags = irqsave();
|
||||
|
||||
/* Get the old button interrupt handler and save the new one */
|
||||
|
||||
oldhandler = g_irqbutton[id];
|
||||
g_irqbutton[id] = irqhandler;
|
||||
|
||||
/* Configure the interrupt */
|
||||
|
||||
a1x_pioirq(xxx);
|
||||
(void)irq_attach(xxx, irqhandler);
|
||||
a1x_pioirqenable(xxx);
|
||||
irqrestore(flags);
|
||||
}
|
||||
|
||||
/* Return the old button handler (so that it can be restored) */
|
||||
|
||||
return oldhandler;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
152
configs/pcduino-a10/src/a1x_cxxinitialize.c
Normal file
152
configs/pcduino-a10/src/a1x_cxxinitialize.c
Normal file
@ -0,0 +1,152 @@
|
||||
/************************************************************************************
|
||||
* configs/pcduino-a10/src/a1x_cxxinitialize.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
|
||||
#include "up_internal.h"
|
||||
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
/* Debug ****************************************************************************/
|
||||
/* Non-standard debug that may be enabled just for testing the static constructors */
|
||||
|
||||
#ifndef CONFIG_DEBUG
|
||||
# undef CONFIG_DEBUG_CXX
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DEBUG_CXX
|
||||
# define cxxdbg dbg
|
||||
# define cxxlldbg lldbg
|
||||
# ifdef CONFIG_DEBUG_VERBOSE
|
||||
# define cxxvdbg vdbg
|
||||
# define cxxllvdbg llvdbg
|
||||
# else
|
||||
# define cxxvdbg(x...)
|
||||
# define cxxllvdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# define cxxdbg(x...)
|
||||
# define cxxlldbg(x...)
|
||||
# define cxxvdbg(x...)
|
||||
# define cxxllvdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Types
|
||||
************************************************************************************/
|
||||
/* This type defines one entry in initialization array */
|
||||
|
||||
typedef void (*initializer_t)(void);
|
||||
|
||||
/************************************************************************************
|
||||
* External references
|
||||
************************************************************************************/
|
||||
/* _sinit and _einit are symbols exported by the linker script that mark the
|
||||
* beginning and the end of the C++ initialization section.
|
||||
*/
|
||||
|
||||
extern initializer_t _sinit;
|
||||
extern initializer_t _einit;
|
||||
|
||||
/* _stext and _etext are symbols exported by the linker script that mark the
|
||||
* beginning and the end of text.
|
||||
*/
|
||||
|
||||
extern uint32_t _stext;
|
||||
extern uint32_t _etext;
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_cxxinitialize
|
||||
*
|
||||
* Description:
|
||||
* If C++ and C++ static constructors are supported, then this function
|
||||
* must be provided by board-specific logic in order to perform
|
||||
* initialization of the static C++ class instances.
|
||||
*
|
||||
* This function should then be called in the application-specific
|
||||
* user_start logic in order to perform the C++ initialization. NOTE
|
||||
* that no component of the core NuttX RTOS logic is involved; This
|
||||
* function defintion only provides the 'contract' between application
|
||||
* specific C++ code and platform-specific toolchain support
|
||||
*
|
||||
***************************************************************************/
|
||||
|
||||
void up_cxxinitialize(void)
|
||||
{
|
||||
initializer_t *initp;
|
||||
|
||||
cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n",
|
||||
&_sinit, &_einit, &_stext, &_etext);
|
||||
|
||||
/* Visit each entry in the initialzation table */
|
||||
|
||||
for (initp = &_sinit; initp != &_einit; initp++)
|
||||
{
|
||||
initializer_t initializer = *initp;
|
||||
cxxdbg("initp: %p initializer: %p\n", initp, initializer);
|
||||
|
||||
/* Make sure that the address is non-NULL and lies in the text region
|
||||
* defined by the linker script. Some toolchains may put NULL values
|
||||
* or counts in the initialization table
|
||||
*/
|
||||
|
||||
if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext)
|
||||
{
|
||||
cxxdbg("Calling %p\n", initializer);
|
||||
initializer();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */
|
||||
174
configs/pcduino-a10/src/a1x_leds.c
Normal file
174
configs/pcduino-a10/src/a1x_leds.c
Normal file
@ -0,0 +1,174 @@
|
||||
/****************************************************************************
|
||||
* configs/pcduino-a10/src/a1x_leds.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
|
||||
#include "pcduino_a10.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
|
||||
* with CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_DEBUG_LEDS
|
||||
# define leddbg lldbg
|
||||
# define ledvdbg llvdbg
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: a1x_led_initialize
|
||||
*
|
||||
* Description:
|
||||
* Configure LEDs. LEDs are left in the OFF state.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void a1x_led_initialize(void)
|
||||
{
|
||||
#warning Missing Logic
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledon
|
||||
*
|
||||
* Description:
|
||||
* Select the "logical" ON state:
|
||||
*
|
||||
* SYMBOL Value Meaning LED state
|
||||
* LED2 LED1
|
||||
* ---------------- ----- ----------------------- -------- --------
|
||||
* LED_STARTED 0 NuttX has been started OFF OFF
|
||||
* LED_HEAPALLOCATE 0 Heap has been allocated OFF OFF
|
||||
* LED_IRQSENABLED 0 Interrupts enabled OFF OFF
|
||||
* LED_STACKCREATED 1 Idle stack created ON OFF
|
||||
* LED_INIRQ 2 In an interrupt N/C N/C
|
||||
* LED_SIGNAL 2 In a signal handler N/C N/C
|
||||
* LED_ASSERTION 2 An assertion failed N/C N/C
|
||||
* LED_PANIC 3 The system has crashed N/C Blinking
|
||||
* LED_IDLE - MCU is is sleep mode Not used
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void up_ledon(int led)
|
||||
{
|
||||
#warning Missing logic
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledoff
|
||||
*
|
||||
* Description:
|
||||
* Select the "logical" OFF state:
|
||||
*
|
||||
* SYMBOL Value Meaning LED state
|
||||
* LED2 LED1
|
||||
* ---------------- ----- ----------------------- -------- --------
|
||||
* LED_STARTED 0 NuttX has been started OFF OFF
|
||||
* LED_HEAPALLOCATE 0 Heap has been allocated OFF OFF
|
||||
* LED_IRQSENABLED 0 Interrupts enabled OFF OFF
|
||||
* LED_STACKCREATED 1 Idle stack created ON OFF
|
||||
* LED_INIRQ 2 In an interrupt N/C N/C
|
||||
* LED_SIGNAL 2 In a signal handler N/C N/C
|
||||
* LED_ASSERTION 2 An assertion failed N/C N/C
|
||||
* LED_PANIC 3 The system has crashed N/C Blinking
|
||||
* LED_IDLE - MCU is is sleep mode Not used
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void up_ledoff(int led)
|
||||
{
|
||||
#warning Missing logic
|
||||
}
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: a1x_setled and a1x_setleds
|
||||
*
|
||||
* Description:
|
||||
* These interfaces allow user control of the board LEDs.
|
||||
*
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control both on-board LEDs up
|
||||
* until the completion of boot. The it will continue to control LED2; LED1 is
|
||||
* avaiable for application use.
|
||||
*
|
||||
* If CONFIG_ARCH_LEDS is not defined, then both LEDs are available for application
|
||||
* use.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void a1x_setled(int led, bool ledon)
|
||||
{
|
||||
#warning Missing logic
|
||||
}
|
||||
|
||||
void a1x_setleds(uint8_t ledset)
|
||||
{
|
||||
#warning Missing logic
|
||||
}
|
||||
109
configs/pcduino-a10/src/pcduino_a10.h
Normal file
109
configs/pcduino-a10/src/pcduino_a10.h
Normal file
@ -0,0 +1,109 @@
|
||||
/************************************************************************************
|
||||
* configs/pcduino-a10/src/pcduino-a10.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_PCDUINO_A10_PCDUINO_A10_H
|
||||
#define __CONFIGS_PCDUINO_A10_PCDUINO_A10_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <arch/irq.h>
|
||||
#include <nuttx/irq.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* LEDs *****************************************************************************/
|
||||
#warning Missing logic
|
||||
|
||||
/* Buttons **************************************************************************/
|
||||
#warning Missing logic
|
||||
|
||||
/* SPI Chip Selects *****************************************************************/
|
||||
#warning Missing logic
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: a1x_led_initialize
|
||||
*
|
||||
* Description:
|
||||
* Configure LEDs. LEDs are left in the OFF state.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void a1x_led_initialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: nsh_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization for NSH.
|
||||
*
|
||||
* CONFIG_NSH_ARCHINIT=y :
|
||||
* Called from the NSH library
|
||||
*
|
||||
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, && CONFIG_NSH_ARCHINIT=n :
|
||||
* Called from board_initialize().
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_NSH_LIBRARY
|
||||
int nsh_archinitialize(void);
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_PCDUINO_A10_PCDUINO_A10_H */
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
README
|
||||
=====
|
||||
======
|
||||
|
||||
This README file describes the port of NuttX to the SAMA5D3x-EK
|
||||
development boards. These boards feature the Atmel SAMA5D3
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/************************************************************************************
|
||||
* configs/sama5df3x-ek/include/board.h
|
||||
* configs/sama5d3x-ek/include/board.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
############################################################################
|
||||
# configs/sam4s-xplained/src/Makefile
|
||||
# configs/sama5d3x-ek/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/****************************************************************************
|
||||
* configs/sam4l-xplained/src/sam_buttons.c
|
||||
* configs/sama5d3x-ek/src/sam_buttons.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
@ -102,16 +102,16 @@ void up_buttoninit(void)
|
||||
(void)sam_configpio(PIO_USER1);
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* Name: up_buttons
|
||||
*
|
||||
* Description:
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to collect
|
||||
* the state of all buttons. up_buttons() returns an 8-bit bit set with each bit
|
||||
* associated with a button. See the BUTTON* definitions above for the meaning of
|
||||
* each bit in the returned value.
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to
|
||||
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON* definitions
|
||||
* above for the meaning of each bit in the returned value.
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t up_buttons(void)
|
||||
{
|
||||
@ -129,8 +129,8 @@ uint8_t up_buttons(void)
|
||||
*
|
||||
* Configuration Notes:
|
||||
* Configuration CONFIG_SAMA5_PIO_IRQ must be selected to enable the
|
||||
* overall PIO IRQ feature and CONFIG_SAMA5_PIOE_IRQ must be enabled to select
|
||||
* PIOs to support interrupts on PIOE.
|
||||
* overall PIO IRQ feature and CONFIG_SAMA5_PIOE_IRQ must be enabled to
|
||||
* select PIOs to support interrupts on PIOE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user