sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

STM32L4: Eliminate a warning about implicit definition of function. While we are at it, let's improve the naming a little too.

Browse Source
This commit is contained in:
Gregory Nutt 2017-07-22 09:53:29 -06:00
parent d88dc9b2e5
commit 2319ea53a9
20 changed files with 95 additions and 35 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/src/stm32l4/stm32l4_spi.c
View File

@ -41,7 +41,7 @@
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32l4_boardinitialize() to configure SPI chip select
* 1. Provide logic in stm32l4_board_initialize() to configure SPI chip select
* pins.
* 2. Provide stm32l4_spi1/2/3select() and stm32l4_spi1/2/3status() functions in your
* board-specific logic. These functions will perform chip selection and

2
arch/arm/src/stm32l4/stm32l4_spi.h
View File

@ -97,7 +97,7 @@ FAR struct spi_dev_s *stm32l4_spibus_initialize(int bus);
* (including stm32l4_spibus_initialize()) are provided by common STM32 logic. To use this
* common SPI logic on your board:
*
* 1. Provide logic in stm32l4_boardinitialize() to configure SPI chip select
* 1. Provide logic in stm32l4_board_initialize() to configure SPI chip select
* pins.
* 2. Provide stm32l4_spi1/2/...select() and stm32l4_spi1/2/...status() functions in your
* board-specific logic. These functions will perform chip selection and

2
arch/arm/src/stm32l4/stm32l4_start.c
View File

@ -358,7 +358,7 @@ void __start(void)
/* Initialize onboard resources */
stm32l4_boardinitialize();
stm32l4_board_initialize();
showprogress('F');
/* Then start NuttX */

59
arch/arm/src/stm32l4/stm32l4_start.h Normal file
View File

@ -0,0 +1,59 @@
/************************************************************************************
* arch/arm/src/stm32l4/stm32l4_start.h
*
* Copyrigth (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_STM32L4_STM32L4_START_H
#define __ARCH_ARM_SRC_STM32L4_STM32L4_START_H
/************************************************************************************
* Included Files
************************************************************************************/
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry
* point is called early in the initialization -- after all memory has been
* configured and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32l4_board_initialize(void);
#endif /* __ARCH_ARM_SRC_STM32L4_STM32L4_START_H */

11
configs/b-l475e-iot01a/src/stm32_boot.c
View File

@ -43,6 +43,7 @@
#include <arch/board/board.h>
#include "up_arch.h"
#include "stm32l4_start.h"
#include "b-l475e-iot01a.h"
/************************************************************************************
@ -50,16 +51,16 @@
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
* All STM32L4 architectures must provide the following entry point. This entry
* point is called early in the initialization -- after all memory has been
* configured and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32l4_boardinitialize(void)
void stm32l4_board_initialize(void)
{
#ifdef CONFIG_ARCH_LEDS
/* Configure on-board LEDs if LED support has been selected. */

4
configs/nucleo-l432kc/include/board.h
View File

@ -243,7 +243,7 @@ extern "C"
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -252,7 +252,7 @@ extern "C"
*
************************************************************************************/
void stm32l4_boardinitialize(void);
void stm32l4_board_initialize(void);
#undef EXTERN
#if defined(__cplusplus)

4
configs/nucleo-l432kc/src/stm32_boot.c
View File

@ -64,7 +64,7 @@
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -73,7 +73,7 @@
*
************************************************************************************/
void stm32l4_boardinitialize(void)
void stm32l4_board_initialize(void)
{
/* Configure on-board LEDs if LED support has been selected. */

2
configs/nucleo-l432kc/src/stm32_spi.c
View File

@ -114,7 +114,7 @@ void stm32l4_spiinitialize(void)
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32l4_boardinitialize() to configure SPI chip select
* 1. Provide logic in stm32l4_board_initialize() to configure SPI chip select
* pins.
* 2. Provide stm32l4_spi1/2select() and stm32l4_spi1/2status() functions in your
* board-specific logic. These functions will perform chip selection and

4
configs/nucleo-l452re/include/board.h
View File

@ -252,7 +252,7 @@ extern "C"
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -261,7 +261,7 @@ extern "C"
*
************************************************************************************/
void stm32l4_boardinitialize(void);
void stm32l4_board_initialize(void);
#undef EXTERN
#if defined(__cplusplus)

4
configs/nucleo-l452re/src/stm32_boot.c
View File

@ -53,7 +53,7 @@
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
@ -62,7 +62,7 @@
*
************************************************************************************/
void stm32l4_boardinitialize(void)
void stm32l4_board_initialize(void)
{
#ifdef CONFIG_ARCH_LEDS
/* Configure on-board LEDs if LED support has been selected. */

2
configs/nucleo-l452re/src/stm32_spi.c
View File

@ -117,7 +117,7 @@ void weak_function stm32l4_spiinitialize(void)
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32l4_boardinitialize() to configure SPI chip select
* 1. Provide logic in stm32l4_board_initialize() to configure SPI chip select
* pins.
* 2. Provide stm32l4_spi1/2/3select() and stm32l4_spi1/2/3status() functions in your
* board-specific logic. These functions will perform chip selection and

4
configs/nucleo-l476rg/include/board.h
View File

@ -249,7 +249,7 @@ extern "C"
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -258,7 +258,7 @@ extern "C"
*
************************************************************************************/
void stm32l4_boardinitialize(void);
void stm32l4_board_initialize(void);
#undef EXTERN
#if defined(__cplusplus)

4
configs/nucleo-l476rg/src/stm32_boot.c
View File

@ -64,7 +64,7 @@
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -73,7 +73,7 @@
*
************************************************************************************/
void stm32l4_boardinitialize(void)
void stm32l4_board_initialize(void)
{
/* Configure on-board LEDs if LED support has been selected. */

2
configs/nucleo-l476rg/src/stm32_spi.c
View File

@ -126,7 +126,7 @@ void weak_function stm32l4_spiinitialize(void)
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32l4_boardinitialize() to configure SPI chip select
* 1. Provide logic in stm32l4_board_initialize() to configure SPI chip select
* pins.
* 2. Provide stm32l4_spi1/2/3select() and stm32l4_spi1/2/3status() functions in your
* board-specific logic. These functions will perform chip selection and

4
configs/nucleo-l496zg/include/board.h
View File

@ -438,7 +438,7 @@ extern "C"
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
@ -447,7 +447,7 @@ extern "C"
*
************************************************************************************/
void stm32l4_boardinitialize(void);
void stm32l4_board_initialize(void);
#undef EXTERN
#if defined(__cplusplus)

4
configs/nucleo-l496zg/src/stm32_boot.c
View File

@ -53,7 +53,7 @@
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
@ -62,7 +62,7 @@
*
************************************************************************************/
void stm32l4_boardinitialize(void)
void stm32l4_board_initialize(void)
{
#ifdef CONFIG_ARCH_LEDS
/* Configure on-board LEDs if LED support has been selected. */

4
configs/stm32l476-mdk/include/board.h
View File

@ -135,7 +135,7 @@ extern "C"
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry
@ -144,7 +144,7 @@ extern "C"
*
************************************************************************************/
void stm32l4_boardinitialize(void);
void stm32l4_board_initialize(void);
#undef EXTERN
#if defined(__cplusplus)

4
configs/stm32l476-mdk/src/stm32_boot.c
View File

@ -56,7 +56,7 @@
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -65,7 +65,7 @@
*
************************************************************************************/
void stm32l4_boardinitialize(void)
void stm32l4_board_initialize(void)
{
/* Configure on-board LEDs if LED support has been selected. */

4
configs/stm32l476vg-disco/include/board.h
View File

@ -293,7 +293,7 @@ extern "C"
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -302,7 +302,7 @@ extern "C"
*
************************************************************************************/
void stm32l4_boardinitialize(void);
void stm32l4_board_initialize(void);
#undef EXTERN
#if defined(__cplusplus)

4
configs/stm32l476vg-disco/src/stm32_boot.c
View File

@ -56,7 +56,7 @@
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
* Name: stm32l4_board_initialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
@ -65,7 +65,7 @@
*
************************************************************************************/
void stm32l4_boardinitialize(void)
void stm32l4_board_initialize(void)
{
/* Configure on-board LEDs if LED support has been selected. */