ESP32 Core: Add an NSH configuration for build testing
This commit is contained in:
Gregory Nutt
parent
ae5ada0ec5
commit
25331aeb63
@ -70,7 +70,7 @@ config ARCH_X86
|
||||
config ARCH_XTENSA
|
||||
bool "Xtensa"
|
||||
---help---
|
||||
Cadence Cadence® Tensilica® Xtensa® actictures.
|
||||
Cadence® Tensilica® Xtensa® actictures.
|
||||
|
||||
config ARCH_Z16
|
||||
bool "ZNEO"
|
||||
|
||||
@ -7,24 +7,31 @@ if ARCH_XTENSA
|
||||
|
||||
choice
|
||||
prompt "XTENSA architecture selection"
|
||||
default ARCH_CHIP_LX6
|
||||
default ARCH_CHIP_ESP32
|
||||
|
||||
config ARCH_CHIP_LX6
|
||||
bool "LX6 DPU"
|
||||
select ARCH_LX6
|
||||
config ARCH_CHIP_ESP32
|
||||
bool "Expressif ESP32"
|
||||
select ARCH_FAMILY_LX6
|
||||
---help---
|
||||
The ESP32 is a dual-core system from Expressif with two Harvard
|
||||
architecture Xtensa LX6 CPUs. All embedded memory, external memory
|
||||
and peripherals are located on the data bus and/or the instruction
|
||||
bus of these CPUs. With some minor exceptions, the address mapping
|
||||
of two CPUs is symmetric, meaning they use the same addresses to
|
||||
access the same memory.
|
||||
|
||||
endchoice # XTENSA chip selection
|
||||
|
||||
config ARCH_FAMILY_LX6
|
||||
bool
|
||||
default n
|
||||
---help---
|
||||
Cadence® Tensilica® Xtensa® LX6 data plane processing unit (DPU).
|
||||
The LX6 is a configurable and extensible processor core.
|
||||
|
||||
endchoice # XTENSA chip selection
|
||||
|
||||
config ARCH_LX6
|
||||
bool
|
||||
default n
|
||||
|
||||
config ARCH_CHIP
|
||||
string
|
||||
default "lx6" if ARCH_LX6
|
||||
default "esp32" if ARCH_CHIP_ESP32
|
||||
|
||||
source arch/xtensa/src/lx6/Kconfig
|
||||
|
||||
|
||||
113
configs/esp32-core/nsh/Make.defs
Normal file
113
configs/esp32-core/nsh/Make.defs
Normal file
@ -0,0 +1,113 @@
|
||||
############################################################################
|
||||
# configs/stm32f4discovery/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT = ld.script
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
750
configs/esp32-core/nsh/defconfig
Normal file
750
configs/esp32-core/nsh/defconfig
Normal file
@ -0,0 +1,750 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_DEFAULT_SMALL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
CONFIG_BUILD_FLAT=y
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
# CONFIG_UBOOT_UIMAGE is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDINT_H is not set
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
# CONFIG_ARCH_DEBUG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
CONFIG_DEBUG_ALERT=y
|
||||
# CONFIG_DEBUG_FEATURES is not set
|
||||
# CONFIG_ARCH_HAVE_STACKCHECK is not set
|
||||
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
# CONFIG_ARCH_HAVE_CUSTOMOPT is not set
|
||||
# CONFIG_DEBUG_NOOPT is not set
|
||||
CONFIG_DEBUG_FULLOPT=y
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_ARM is not set
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_RENESAS is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
CONFIG_ARCH_XTENSA=y
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="xtensa"
|
||||
CONFIG_ARCH_CHIP="esp32"
|
||||
CONFIG_ARCH_CHIP_ESP32=y
|
||||
CONFIG_ARCH_FAMILY_LX6=y
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
# CONFIG_ARCH_HAVE_IRQPRIO is not set
|
||||
# CONFIG_ARCH_L2CACHE is not set
|
||||
# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
|
||||
# CONFIG_ARCH_HAVE_ADDRENV is not set
|
||||
# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
|
||||
# CONFIG_ARCH_HAVE_MULTICPU is not set
|
||||
# CONFIG_ARCH_HAVE_VFORK is not set
|
||||
# CONFIG_ARCH_HAVE_MMU is not set
|
||||
# CONFIG_ARCH_HAVE_MPU is not set
|
||||
# CONFIG_ARCH_NAND_HWECC is not set
|
||||
# CONFIG_ARCH_HAVE_EXTCLK is not set
|
||||
# CONFIG_ARCH_HAVE_POWEROFF is not set
|
||||
# CONFIG_ARCH_HAVE_RESET is not set
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_IDLE_CUSTOM is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# Interrupt options
|
||||
#
|
||||
# CONFIG_ARCH_HAVE_INTERRUPTSTACK is not set
|
||||
# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Boot Memory Configuration
|
||||
#
|
||||
CONFIG_RAM_START=0x20000000
|
||||
CONFIG_RAM_SIZE=114688
|
||||
# CONFIG_ARCH_HAVE_SDRAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_ESP32CORE=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="esp32-core"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
# CONFIG_BOARD_CRASHDUMP is not set
|
||||
# CONFIG_LIB_BOARDCTL is not set
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
# CONFIG_DISABLE_ENVIRON is not set
|
||||
|
||||
#
|
||||
# Clocks and Timers
|
||||
#
|
||||
CONFIG_USEC_PER_TICK=10000
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
# CONFIG_CLOCK_MONOTONIC is not set
|
||||
# CONFIG_ARCH_HAVE_TIMEKEEPING is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2011
|
||||
CONFIG_START_MONTH=12
|
||||
CONFIG_START_DAY=6
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=16
|
||||
CONFIG_WDOG_INTRESERVE=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Tasks and Scheduling
|
||||
#
|
||||
# CONFIG_INIT_NONE is not set
|
||||
CONFIG_INIT_ENTRYPOINT=y
|
||||
# CONFIG_INIT_FILEPATH is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_SPORADIC is not set
|
||||
CONFIG_TASK_NAME_SIZE=31
|
||||
CONFIG_MAX_TASKS=16
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
|
||||
#
|
||||
# Pthread Options
|
||||
#
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
|
||||
#
|
||||
# Performance Monitoring
|
||||
#
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
|
||||
#
|
||||
# Files and I/O
|
||||
#
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
|
||||
#
|
||||
# RTOS hooks
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# POSIX Message Queue Options
|
||||
#
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
# CONFIG_MODULE is not set
|
||||
|
||||
#
|
||||
# Work queue support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_SCHED_HPWORK is not set
|
||||
# CONFIG_SCHED_LPWORK is not set
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
# CONFIG_LIB_SYSCALL is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_DEV_URANDOM is not set
|
||||
# CONFIG_DEV_LOOP is not set
|
||||
|
||||
#
|
||||
# Buffering
|
||||
#
|
||||
# CONFIG_DRVR_WRITEBUFFER is not set
|
||||
# CONFIG_DRVR_READAHEAD is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_ARCH_HAVE_I2CRESET is not set
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_SLAVE is not set
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_SPI_CALLBACK is not set
|
||||
# CONFIG_SPI_HWFEATURES is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
|
||||
# CONFIG_SPI_CS_DELAY_CONTROL is not set
|
||||
# CONFIG_SPI_DRIVER is not set
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
# CONFIG_I2S is not set
|
||||
|
||||
#
|
||||
# Timer Driver Support
|
||||
#
|
||||
# CONFIG_TIMER is not set
|
||||
# CONFIG_ONESHOT is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_VIDEO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# IO Expander/GPIO Support
|
||||
#
|
||||
# CONFIG_IOEXPANDER is not set
|
||||
# CONFIG_DEV_GPIO is not set
|
||||
|
||||
#
|
||||
# LCD Driver Support
|
||||
#
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_SLCD is not set
|
||||
|
||||
#
|
||||
# LED Support
|
||||
#
|
||||
# CONFIG_USERLED is not set
|
||||
# CONFIG_RGBLED is not set
|
||||
# CONFIG_PCA9635PW is not set
|
||||
# CONFIG_NCP5623C is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MODEM is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_EEPROM is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_SERIAL_REMOVABLE is not set
|
||||
# CONFIG_SERIAL_CONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
# CONFIG_UART_SERIALDRIVER is not set
|
||||
# CONFIG_UART0_SERIALDRIVER is not set
|
||||
# CONFIG_UART1_SERIALDRIVER is not set
|
||||
# CONFIG_UART2_SERIALDRIVER is not set
|
||||
# CONFIG_UART3_SERIALDRIVER is not set
|
||||
# CONFIG_UART4_SERIALDRIVER is not set
|
||||
# CONFIG_UART5_SERIALDRIVER is not set
|
||||
# CONFIG_UART6_SERIALDRIVER is not set
|
||||
# CONFIG_UART7_SERIALDRIVER is not set
|
||||
# CONFIG_UART8_SERIALDRIVER is not set
|
||||
# CONFIG_SCI0_SERIALDRIVER is not set
|
||||
# CONFIG_SCI1_SERIALDRIVER is not set
|
||||
# CONFIG_USART0_SERIALDRIVER is not set
|
||||
# CONFIG_USART1_SERIALDRIVER is not set
|
||||
# CONFIG_USART2_SERIALDRIVER is not set
|
||||
# CONFIG_USART3_SERIALDRIVER is not set
|
||||
# CONFIG_USART4_SERIALDRIVER is not set
|
||||
# CONFIG_USART5_SERIALDRIVER is not set
|
||||
# CONFIG_USART6_SERIALDRIVER is not set
|
||||
# CONFIG_USART7_SERIALDRIVER is not set
|
||||
# CONFIG_USART8_SERIALDRIVER is not set
|
||||
# CONFIG_OTHER_UART_SERIALDRIVER is not set
|
||||
# CONFIG_MCU_SERIAL is not set
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_DMA is not set
|
||||
# CONFIG_ARCH_HAVE_SERIAL_TERMIOS is not set
|
||||
# CONFIG_PSEUDOTERM is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_HAVE_USBTRACE is not set
|
||||
# CONFIG_DRIVERS_WIRELESS is not set
|
||||
# CONFIG_DRIVERS_CONTACTLESS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_ARCH_SYSLOG is not set
|
||||
# CONFIG_RAMLOG is not set
|
||||
# CONFIG_SYSLOG_INTBUFFER is not set
|
||||
# CONFIG_SYSLOG_TIMESTAMP is not set
|
||||
# CONFIG_SYSLOG_SERIAL_CONSOLE is not set
|
||||
# CONFIG_SYSLOG_CHAR is not set
|
||||
CONFIG_SYSLOG_CONSOLE=y
|
||||
# CONFIG_SYSLOG_NONE is not set
|
||||
# CONFIG_SYSLOG_FILE is not set
|
||||
# CONFIG_SYSLOG_CHARDEV is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_ARCH_HAVE_NET is not set
|
||||
# CONFIG_ARCH_HAVE_PHY is not set
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# Crypto API
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_AUTOMOUNTER is not set
|
||||
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
|
||||
CONFIG_FS_READABLE=y
|
||||
# CONFIG_FS_WRITABLE is not set
|
||||
# CONFIG_FS_NAMED_SEMAPHORES is not set
|
||||
CONFIG_FS_MQUEUE_MPATH="/var/mqueue"
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
# CONFIG_FS_FAT is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_TMPFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_BINFS is not set
|
||||
CONFIG_FS_PROCFS=y
|
||||
# CONFIG_FS_PROCFS_REGISTER is not set
|
||||
|
||||
#
|
||||
# Exclude individual procfs entries
|
||||
#
|
||||
# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set
|
||||
# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set
|
||||
# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set
|
||||
# CONFIG_FS_UNIONFS is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_ARCH_HAVE_HEAP2 is not set
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Wireless Support
|
||||
#
|
||||
|
||||
#
|
||||
# Binary Loader
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_BINFMT_EXEPATH is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
CONFIG_BUILTIN=y
|
||||
# CONFIG_PIC is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIBC_LONG_LONG=y
|
||||
# CONFIG_LIBC_IOCTL_VARIADIC is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_LIBC_LOCALTIME is not set
|
||||
# CONFIG_TIME_EXTENDED is not set
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
# CONFIG_ARCH_HAVE_TLS is not set
|
||||
# CONFIG_LIBC_NETDB is not set
|
||||
# CONFIG_NETDB_HOSTFILE is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_LIB_CRC64_FAST is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
# CONFIG_LIB_HEX2BIN is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
# CONFIG_UCLIBCXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
|
||||
#
|
||||
# CAN Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_CHAT is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_MEDIA is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTERM is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PCA9635 is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_PPPD is not set
|
||||
# CONFIG_EXAMPLES_RFID_READUID is not set
|
||||
# CONFIG_EXAMPLES_RGBLED is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERIALBLASTER is not set
|
||||
# CONFIG_EXAMPLES_SERIALRX is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMP is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
# CONFIG_EXAMPLES_WEBSERVER is not set
|
||||
|
||||
#
|
||||
# File System Utilities
|
||||
#
|
||||
# CONFIG_FSUTILS_INIFILE is not set
|
||||
# CONFIG_FSUTILS_PASSWD is not set
|
||||
|
||||
#
|
||||
# GPS Utilities
|
||||
#
|
||||
# CONFIG_GPSUTILS_MINMEA_LIB is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
# CONFIG_GRAPHICS_TRAVELER is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_BAS is not set
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_MICROPYTHON is not set
|
||||
# CONFIG_INTERPRETERS_MINIBASIC is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_ESP8266 is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
# CONFIG_NSH_MOTD is not set
|
||||
|
||||
#
|
||||
# Command Line Configuration
|
||||
#
|
||||
CONFIG_NSH_READLINE=y
|
||||
# CONFIG_NSH_CLE is not set
|
||||
CONFIG_NSH_LINELEN=64
|
||||
# CONFIG_NSH_DISABLE_SEMICOLON is not set
|
||||
# CONFIG_NSH_CMDPARMS is not set
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
# CONFIG_NSH_ARGCAT is not set
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
# CONFIG_NSH_DISABLE_ADDROUTE is not set
|
||||
# CONFIG_NSH_DISABLE_BASENAME is not set
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
# CONFIG_NSH_DISABLE_CMP is not set
|
||||
CONFIG_NSH_DISABLE_DATE=y
|
||||
# CONFIG_NSH_DISABLE_DD is not set
|
||||
# CONFIG_NSH_DISABLE_DF is not set
|
||||
# CONFIG_NSH_DISABLE_DELROUTE is not set
|
||||
# CONFIG_NSH_DISABLE_DIRNAME is not set
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_IFUPDOWN is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
CONFIG_NSH_DISABLE_LOSMART=y
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MV is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
CONFIG_NSH_DISABLE_PRINTF=y
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TIME is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNAME is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
|
||||
CONFIG_NSH_PROC_MOUNTPOINT="/proc"
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
|
||||
#
|
||||
# Scripting Support
|
||||
#
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLE_ITEF is not set
|
||||
# CONFIG_NSH_DISABLE_LOOPS is not set
|
||||
|
||||
#
|
||||
# Console Configuration
|
||||
#
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
# CONFIG_NSH_ALTCONDEV is not set
|
||||
# CONFIG_NSH_ARCHINIT is not set
|
||||
# CONFIG_NSH_LOGIN is not set
|
||||
# CONFIG_NSH_CONSOLE_LOGIN is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# Platform-specific Support
|
||||
#
|
||||
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||
|
||||
#
|
||||
# System Libraries and NSH Add-Ons
|
||||
#
|
||||
# CONFIG_SYSTEM_CLE is not set
|
||||
# CONFIG_SYSTEM_CUTERM is not set
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
# CONFIG_SYSTEM_HEX2BIN is not set
|
||||
# CONFIG_SYSTEM_HEXED is not set
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
CONFIG_READLINE_HAVE_EXTMATCH=y
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
# CONFIG_READLINE_TABCOMPLETION is not set
|
||||
# CONFIG_READLINE_CMD_HISTORY is not set
|
||||
# CONFIG_SYSTEM_SUDOKU is not set
|
||||
# CONFIG_SYSTEM_SYSTEM is not set
|
||||
# CONFIG_SYSTEM_TEE is not set
|
||||
# CONFIG_SYSTEM_UBLOXMODEM is not set
|
||||
# CONFIG_SYSTEM_VI is not set
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
80
configs/esp32-core/nsh/setenv.sh
Normal file
80
configs/esp32-core/nsh/setenv.sh
Normal file
@ -0,0 +1,80 @@
|
||||
#!/bin/bash
|
||||
# configs/stm32f4discovery/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
|
||||
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH variable
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
Loading…
Reference in New Issue
Block a user