Add LPC43 EMC, Ethernet, and alarm timer header files

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4897 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-07-02 19:21:59 +00:00
parent 3102dcbb37
commit 27a374c973
5 changed files with 1225 additions and 17 deletions

View File

@ -0,0 +1,117 @@
/************************************************************************************
* arch/arm/src/lpc43xx/chip/lpc43_atimer.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_ATIMER_H
#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_ATIMER_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define LPC43_ATIMER_COUNT_OFFSET 0x0000 /* Downcounter register */
#define LPC43_ATIMER_PRESET_OFFSET 0x0004 /* Preset value register */
#define LPC43_ATIMER_CLREN_OFFSET 0x0fd8 /* Interrupt clear enable register */
#define LPC43_ATIMER_SETEN_OFFSET 0x0fdc /* Interrupt set enable register */
#define LPC43_ATIMER_STATUS_OFFSET 0x0fe0 /* Status register */
#define LPC43_ATIMER_ENABLE_OFFSET 0x0fe4 /* Enable register */
#define LPC43_ATIMER_CLRSTAT_OFFSET 0x0fe8 /* Clear register */
#define LPC43_ATIMER_SETSTAT_OFFSET 0x0fec /* Set register */
/* Register Addresses ***************************************************************/
#define LPC43_ATIMER_COUNT (LPC43_ATIMER_BASE+LPC43_ATIMER_COUNT_OFFSET)
#define LPC43_ATIMER_PRESET (LPC43_ATIMER_BASE+LPC43_ATIMER_PRESET_OFFSET)
#define LPC43_ATIMER_CLREN (LPC43_ATIMER_BASE+LPC43_ATIMER_CLREN_OFFSET)
#define LPC43_ATIMER_SETEN (LPC43_ATIMER_BASE+LPC43_ATIMER_SETEN_OFFSET)
#define LPC43_ATIMER_STATUS (LPC43_ATIMER_BASE+LPC43_ATIMER_STATUS_OFFSET)
#define LPC43_ATIMER_ENABLE (LPC43_ATIMER_BASE+LPC43_ATIMER_ENABLE_OFFSET)
#define LPC43_ATIMER_CLRSTAT (LPC43_ATIMER_BASE+LPC43_ATIMER_CLRSTAT_OFFSET)
#define LPC43_ATIMER_SETSTAT (LPC43_ATIMER_BASE+LPC43_ATIMER_SETSTAT_OFFSET)
/* Register Bit Definitions *********************************************************/
/* Downcounter register */
#define ATIMER_COUNT_MASK 0xffff /* Bits 0-15: Down counter */
/* Bits 16-31: Reserved */
/* Preset value register */
#define ATIMER_PRESET_MASK 0xffff /* Bits 0-15: Counter reload value */
/* Bits 16-31: Reserved */
/* Interrupt clear enable register */
#define ATIMER_CLREN (1 << 0) /* Bit 0: Clear interrupt enable */
/* Bits 1-31: Reserved */
/* Interrupt set enable register */
#define ATIMER_SETEN (1 << 0) /* Bit 0: Set interrupt enable */
/* Bits 1-31: Reserved */
/* Status register */
#define ATIMER_STATUS (1 << 0) /* Bit 0: Interrupt status */
/* Bits 1-31: Reserved */
/* Enable register */
#define ATIMER_ENABLE (1 << 0) /* Bit 0: Interrupt enable status */
/* Bits 1-31: Reserved */
/* Clear register */
#define ATIMER_CLRSTAT (1 << 0) /* Bit 0: Clear interrupt status */
/* Bits 1-31: Reserved */
/* Set register */
#define ATIMER_SETSTAT (1 << 0) /* Bit 0: Set interrupt status */
/* Bits 1-31: Reserved */
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_ATIMER_H */

View File

@ -0,0 +1,425 @@
/****************************************************************************************************
* arch/arm/src/lpc43xx/chip/lpc43_emc.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_EMC_H
#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_EMC_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
/****************************************************************************************************
* Pre-processor Definitions
****************************************************************************************************/
/* Register Offsets *********************************************************************************/
#define LPC43_EMC_CONTROL_OFFSET 0x0000 /* EMC Control register */
#define LPC43_EMC_STATUS_OFFSET 0x0004 /* EMC Status register */
#define LPC43_EMC_CONFIG_OFFSET 0x0008 /* EMC Configuration register */
#define LPC43_EMC_DYNCONTROL_OFFSET 0x0020 /* Dynamic Memory Control register */
#define LPC43_EMC_DYNREFRESH_OFFSET 0x0024 /* Dynamic Memory Refresh Timer register */
#define LPC43_EMC_DYNREADCONFIG_OFFSET 0x0028 /* Dynamic Memory Read Configuration register */
#define LPC43_EMC_DYNRP_OFFSET 0x0030 /* Dynamic Memory Precharge Command Period register */
#define LPC43_EMC_DYNRAS_OFFSET 0x0034 /* Dynamic Memory Active to Precharge Command Period register */
#define LPC43_EMC_DYNSREX_OFFSET 0x0038 /* Dynamic Memory Self Refresh Exit Time register */
#define LPC43_EMC_DYNAPR_OFFSET 0x003c /* Dynamic Memory Last Data Out to Active Time register */
#define LPC43_EMC_DYNDAL_OFFSET 0x0040 /* Dynamic Memory Data In to Active Command Time register */
#define LPC43_EMC_DYNWR_OFFSET 0x0044 /* Dynamic Memory Write Recovery Time register */
#define LPC43_EMC_DYNRC_OFFSET 0x0048 /* Dynamic Memory Active to Active Command Period register */
#define LPC43_EMC_DYNRFC_OFFSET 0x004c /* Dynamic Memory Auto-refresh Period register */
#define LPC43_EMC_DYNXSR_OFFSET 0x0050 /* Dynamic Memory Exit Self Refresh register */
#define LPC43_EMC_DYNRRD_OFFSET 0x0054 /* Dynamic Memory Active Bank A to Active Bank B Time register */
#define LPC43_EMC_DYNMRD_OFFSET 0x0058 /* Dynamic Memory Load Mode register to Active Command Time */
#define LPC43_EMC_STATEXTWAIT_OFFSET 0x0080 /* Static Memory Extended Wait register */
#define LPC43_EMC_DYNCONFIG_CSOFFSET 0x0000
#define LPC43_EMC_DYNRASCAS_CSOFFSET 0x0004
#define LPC43_EMC_DYNCS_OFFSET(n) (0x100 + ((n) << 5))
#define LPC43_EMC_DYNCONFIG_OFFSET(n) (DYNCS_OFFSET(n)+DYNCONFIG_CSOFFSET)
#define LPC43_EMC_DYNRASCAS_OFFSET(n) (DYNCS_OFFSET(n)+DYNRASCAS_CSOFFSET)
#define LPC43_EMC_DYNCONFIG0_OFFSET 0x0100 /* Dynamic Memory Configuration register CS0 */
#define LPC43_EMC_DYNRASCAS0_OFFSET 0x0104 /* Dynamic Memory RAS & CAS Delay register CS0 */
#define LPC43_EMC_DYNCONFIG1_OFFSET 0x0120 /* Dynamic Memory Configuration register CS1 */
#define LPC43_EMC_DYNRASCAS1_OFFSET 0x0124 /* Dynamic Memory RAS & CAS Delay register CS1 */
#define LPC43_EMC_DYNCONFIG2_OFFSET 0x0140 /* Dynamic Memory Configuration register CS2 */
#define LPC43_EMC_DYNRASCAS2_OFFSET 0x0144 /* Dynamic Memory RAS & CAS Delay register CS2 */
#define LPC43_EMC_DYNCONFIG3_OFFSET 0x0160 /* Dynamic Memory Configuration register CS3 */
#define LPC43_EMC_DYNRASCAS3_OFFSET 0x0164 /* ynamic Memory RAS & CAS Delay register CS3 */
#define LPC43_EMC_STATCONFIG_CSOFFSET 0x0000 /* Static Memory Configuration register */
#define LPC43_EMC_STATWAITWEN_CSOFFSET 0x0004 /* Static Memory Write Enable Delay register */
#define LPC43_EMC_STATWAITOEN_CSOFFSET 0x0008 /* Static Memory Output Enable Delay register */
#define LPC43_EMC_STATWAITRD_CSOFFSET 0x000c /* Static Memory Read Delay register */
#define LPC43_EMC_STATWAITPAGE_CSOFFSET 0x0010 /* Static Memory Write Delay registers */
#define LPC43_EMC_STATWAITWR_CSOFFSET 0x0014 /* Static Memory Page Mode Read Delay register */
#define LPC43_EMC_STATWAITTURN_CSOFFSET 0x0018 /* Static Memory Turn Round Delay register */
#define LPC43_EMC_STATCS_OFFSET(n) (0x0200 + ((n) << 5))
#define LPC43_EMC_STATCONFIG_OFFSET(n) (LPC43_EMC_STATCS_OFFSET(n)+LPC43_EMC_STATCONFIG_CSOFFSET)
#define LPC43_EMC_STATWAITWEN_OFFSET(n) (LPC43_EMC_STATCS_OFFSET(n)+LPC43_EMC_STATWAITWEN_CSOFFSET)
#define LPC43_EMC_STATWAITOEN_OFFSET(n) (LPC43_EMC_STATCS_OFFSET(n)+LPC43_EMC_STATWAITOEN_CSOFFSET)
#define LPC43_EMC_STATWAITRD_OFFSET(n) (LPC43_EMC_STATCS_OFFSET(n)+LPC43_EMC_STATWAITRD_CSOFFSET)
#define LPC43_EMC_STATWAITPAGE_OFFSET(n) (LPC43_EMC_STATCS_OFFSET(n)+LPC43_EMC_STATWAITPAGE_CSOFFSET)
#define LPC43_EMC_STATWAITWR_OFFSET(n) (LPC43_EMC_STATCS_OFFSET(n)+LPC43_EMC_STATWAITWR_CSOFFSET)
#define LPC43_EMC_STATWAITTURN_OFFSET(n) (LPC43_EMC_STATCS_OFFSET(n)+LPC43_EMC_STATWAITTURN_CSOFFSET)
#define LPC43_EMC_STATCONFIG0_OFFSET 0x0200 /* Static Memory Configuration register CS0 */
#define LPC43_EMC_STATWAITWEN0_OFFSET 0x0204 /* Static Memory Write Enable Delay register CS0 */
#define LPC43_EMC_STATWAITOEN0_OFFSET 0x0208 /* Static Memory Output Enable Delay register CS0 */
#define LPC43_EMC_STATWAITRD0_OFFSET 0x020c /* Static Memory Read Delay register CS0 */
#define LPC43_EMC_STATWAITPAGE0_OFFSET 0x0210 /* Static Memory Page Mode Read Delay register CS0 */
#define LPC43_EMC_STATWAITWR0_OFFSET 0x0214 /* Static Memory Write Delay register CS0 */
#define LPC43_EMC_STATWAITTURN0_OFFSET 0x0218 /* Static Memory Turn Round Delay register CS0 */
#define LPC43_EMC_STATCONFIG1_OFFSET 0x0220 /* Static Memory Configuration register CS1 */
#define LPC43_EMC_STATWAITWEN1_OFFSET 0x0224 /* Static Memory Write Enable Delay register CS1 */
#define LPC43_EMC_STATWAITOEN1_OFFSET 0x0228 /* Static Memory Output Enable Delay register CS1 */
#define LPC43_EMC_STATWAITRD1_OFFSET 0x022c /* Static Memory Read Delay register CS1 */
#define LPC43_EMC_STATWAITPAGE1_OFFSET 0x0230 /* Static Memory Page Mode Read Delay register CS1 */
#define LPC43_EMC_STATWAITWR1_OFFSET 0x0234 /* Static Memory Write Delay registers CS1 */
#define LPC43_EMC_STATWAITTURN1_OFFSET 0x0238 /* Static Memory Turn Round Delay register CS1 */
#define LPC43_EMC_STATCONFIG2_OFFSET 0x0240 /* Static Memory Configuration register CS2 */
#define LPC43_EMC_STATWAITWEN2_OFFSET 0x0244 /* Static Memory Write Enable Delay register CS2 */
#define LPC43_EMC_STATWAITOEN2_OFFSET 0x0248 /* Static Memory Output Enable Delay register CS2 */
#define LPC43_EMC_STATWAITRD2_OFFSET 0x024c /* Static Memory Read Delay register CS2 */
#define LPC43_EMC_STATWAITPAGE2_OFFSET 0x0250 /* Static Memory Page Mode Read Delay register CS2 */
#define LPC43_EMC_STATWAITWR2_OFFSET 0x0254 /* Static Memory Write Delay registers CS2 */
#define LPC43_EMC_STATWAITTURN2_OFFSET 0x0258 /* Static Memory Turn Round Delay register CS2 */
#define LPC43_EMC_STATCONFIG3_OFFSET 0x0260 /* Static Memory Configuration register CS3 */
#define LPC43_EMC_STATWAITWEN3_OFFSET 0x0264 /* Static Memory Write Enable Delay register CS3 */
#define LPC43_EMC_STATWAITOEN3_OFFSET 0x0268 /* Static Memory Output Enable Delay register CS3 */
#define LPC43_EMC_STATWAITRD3_OFFSET 0x026c /* Static Memory Read Delay register CS3 */
#define LPC43_EMC_STATWAITPAGE3_OFFSET 0x0270 /* Static Memory Page Mode Read Delay register CS3 */
#define LPC43_EMC_STATWAITWR3_OFFSET 0x0274 /* Static Memory Write Delay registers CS3 */
#define LPC43_EMC_STATWAITTURN3_OFFSET 0x0278 /* Static Memory Turn Round Delay register CS3 */
/* Register Addresses *******************************************************************************/
#define LPC43_EMC_CONTROL (LPC43_EMC_BASE+LPC43_EMC_CONTROL_OFFSET)
#define LPC43_EMC_STATUS (LPC43_EMC_BASE+LPC43_EMC_STATUS_OFFSET)
#define LPC43_EMC_CONFIG (LPC43_EMC_BASE+LPC43_EMC_CONFIG_OFFSET)
#define LPC43_EMC_DYNCONTROL (LPC43_EMC_BASE+LPC43_EMC_DYNCONTROL_OFFSET)
#define LPC43_EMC_DYNREFRESH (LPC43_EMC_BASE+LPC43_EMC_DYNREFRESH_OFFSET)
#define LPC43_EMC_DYNREADCONFIG (LPC43_EMC_BASE+LPC43_EMC_DYNREADCONFIG_OFFSET)
#define LPC43_EMC_DYNRP (LPC43_EMC_BASE+LPC43_EMC_DYNRP_OFFSET)
#define LPC43_EMC_DYNRAS (LPC43_EMC_BASE+LPC43_EMC_DYNRAS_OFFSET)
#define LPC43_EMC_DYNSREX (LPC43_EMC_BASE+LPC43_EMC_DYNSREX_OFFSET)
#define LPC43_EMC_DYNAPR (LPC43_EMC_BASE+LPC43_EMC_DYNAPR_OFFSET)
#define LPC43_EMC_DYNDAL (LPC43_EMC_BASE+LPC43_EMC_DYNDAL_OFFSET)
#define LPC43_EMC_DYNWR (LPC43_EMC_BASE+LPC43_EMC_DYNWR_OFFSET)
#define LPC43_EMC_DYNRC (LPC43_EMC_BASE+LPC43_EMC_DYNRC_OFFSET)
#define LPC43_EMC_DYNRFC (LPC43_EMC_BASE+LPC43_EMC_DYNRFC_OFFSET)
#define LPC43_EMC_DYNXSR (LPC43_EMC_BASE+LPC43_EMC_DYNXSR_OFFSET)
#define LPC43_EMC_DYNRRD (LPC43_EMC_BASE+LPC43_EMC_DYNRRD_OFFSET)
#define LPC43_EMC_DYNMRD (LPC43_EMC_BASE+LPC43_EMC_DYNMRD_OFFSET)
#define LPC43_EMC_STATEXTWAIT (LPC43_EMC_BASE+LPC43_EMC_STATEXTWAIT_OFFSET)
#define LPC43_EMC_DYNCS(n) (LPC43_EMC_BASE+LPC43_EMC_DYNCS_OFFSET(n))
#define LPC43_EMC_DYNCONFIG(n) (LPC43_EMC_BASE+LPC43_EMC_DYNCONFIG_OFFSET(n))
#define LPC43_EMC_DYNRASCAS(n) (LPC43_EMC_BASE+LPC43_EMC_DYNRASCAS_OFFSET(n))
#define LPC43_EMC_DYNCONFIG0 (LPC43_EMC_BASE+LPC43_EMC_DYNCONFIG0_OFFSET)
#define LPC43_EMC_DYNRASCAS0 (LPC43_EMC_BASE+LPC43_EMC_DYNRASCAS0_OFFSET)
#define LPC43_EMC_DYNCONFIG1 (LPC43_EMC_BASE+LPC43_EMC_DYNCONFIG1_OFFSET)
#define LPC43_EMC_DYNRASCAS1 (LPC43_EMC_BASE+LPC43_EMC_DYNRASCAS1_OFFSET)
#define LPC43_EMC_DYNCONFIG2 (LPC43_EMC_BASE+LPC43_EMC_DYNCONFIG2_OFFSET)
#define LPC43_EMC_DYNRASCAS2 (LPC43_EMC_BASE+LPC43_EMC_DYNRASCAS2_OFFSET)
#define LPC43_EMC_DYNCONFIG3 (LPC43_EMC_BASE+LPC43_EMC_DYNCONFIG3_OFFSET)
#define LPC43_EMC_DYNRASCAS3 (LPC43_EMC_BASE+LPC43_EMC_DYNRASCAS3_OFFSET)
#define LPC43_EMC_STATCS(n) (LPC43_EMC_BASE+LPC43_EMC_STATCS_OFFSET(n))
#define LPC43_EMC_STATCONFIG(n) (LPC43_EMC_BASE+LPC43_EMC_STATCONFIG_OFFSET(n))
#define LPC43_EMC_STATWAITWEN(n) (LPC43_EMC_BASE+LPC43_EMC_STATWAITWEN_OFFSET(n))
#define LPC43_EMC_STATWAITOEN(n) (LPC43_EMC_BASE+LPC43_EMC_STATWAITOEN_OFFSET(n))
#define LPC43_EMC_STATWAITRD(n) (LPC43_EMC_BASE+LPC43_EMC_STATWAITRD_OFFSET(n))
#define LPC43_EMC_STATWAITPAGE(n) (LPC43_EMC_BASE+LPC43_EMC_STATWAITPAGE_OFFSET(n))
#define LPC43_EMC_STATWAITWR(n) (LPC43_EMC_BASE+LPC43_EMC_STATWAITWR_OFFSET(n))
#define LPC43_EMC_STATWAITTURN(n) (LPC43_EMC_BASE+LPC43_EMC_STATWAITTURN_OFFSET(n))
#define LPC43_EMC_STATCONFIG0 (LPC43_EMC_BASE+LPC43_EMC_STATCONFIG0_OFFSET)
#define LPC43_EMC_STATWAITWEN0 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWEN0_OFFSET)
#define LPC43_EMC_STATWAITOEN0 (LPC43_EMC_BASE+LPC43_EMC_STATWAITOEN0_OFFSET)
#define LPC43_EMC_STATWAITRD0 (LPC43_EMC_BASE+LPC43_EMC_STATWAITRD0_OFFSET)
#define LPC43_EMC_STATWAITPAGE0 (LPC43_EMC_BASE+LPC43_EMC_STATWAITPAGE0_OFFSET)
#define LPC43_EMC_STATWAITWR0 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWR0_OFFSET)
#define LPC43_EMC_STATWAITTURN0 (LPC43_EMC_BASE+LPC43_EMC_STATWAITTURN0_OFFSET)
#define LPC43_EMC_STATCONFIG1 (LPC43_EMC_BASE+LPC43_EMC_STATCONFIG1_OFFSET)
#define LPC43_EMC_STATWAITWEN1 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWEN1_OFFSET)
#define LPC43_EMC_STATWAITOEN1 (LPC43_EMC_BASE+LPC43_EMC_STATWAITOEN1_OFFSET)
#define LPC43_EMC_STATWAITRD1 (LPC43_EMC_BASE+LPC43_EMC_STATWAITRD1_OFFSET)
#define LPC43_EMC_STATWAITPAGE1 (LPC43_EMC_BASE+LPC43_EMC_STATWAITPAGE1_OFFSET)
#define LPC43_EMC_STATWAITWR1 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWR1_OFFSET)
#define LPC43_EMC_STATWAITTURN1 (LPC43_EMC_BASE+LPC43_EMC_STATWAITTURN1_OFFSET)
#define LPC43_EMC_STATCONFIG2 (LPC43_EMC_BASE+LPC43_EMC_STATCONFIG2_OFFSET)
#define LPC43_EMC_STATWAITWEN2 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWEN2_OFFSET)
#define LPC43_EMC_STATWAITOEN2 (LPC43_EMC_BASE+LPC43_EMC_STATWAITOEN2_OFFSET)
#define LPC43_EMC_STATWAITRD2 (LPC43_EMC_BASE+LPC43_EMC_STATWAITRD2_OFFSET)
#define LPC43_EMC_STATWAITPAGE2 (LPC43_EMC_BASE+LPC43_EMC_STATWAITPAGE2_OFFSET)
#define LPC43_EMC_STATWAITWR2 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWR2_OFFSET)
#define LPC43_EMC_STATWAITTURN2 (LPC43_EMC_BASE+LPC43_EMC_STATWAITTURN2_OFFSET)
#define LPC43_EMC_STATCONFIG3 (LPC43_EMC_BASE+LPC43_EMC_STATCONFIG3_OFFSET)
#define LPC43_EMC_STATWAITWEN3 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWEN3_OFFSET)
#define LPC43_EMC_STATWAITOEN3 (LPC43_EMC_BASE+LPC43_EMC_STATWAITOEN3_OFFSET)
#define LPC43_EMC_STATWAITRD3 (LPC43_EMC_BASE+LPC43_EMC_STATWAITRD3_OFFSET)
#define LPC43_EMC_STATWAITPAGE3 (LPC43_EMC_BASE+LPC43_EMC_STATWAITPAGE3_OFFSET)
#define LPC43_EMC_STATWAITWR3 (LPC43_EMC_BASE+LPC43_EMC_STATWAITWR3_OFFSET)
#define LPC43_EMC_STATWAITTURN3 (LPC43_EMC_BASE+LPC43_EMC_STATWAITTURN3_OFFSET)
/* Register Bit Definitions *************************************************************************/
/* EMC Control register */
#define EMC_CONTROL_ENA (1 << 0) /* Bit 0: EMC Enable */
#define EMC_CONTROL_ADDRMIRROR (1 << 1) /* Bit 1: Address mirror */
#define EMC_CONTROL_LOWPOWER (1 << 2) /* Bit 2: Low-power mode */
/* Bits 3-31: Reserved */
/* EMC Status register */
#define EMC__
#define EMC_STATUS_BUSY (1 << 0) /* Bit 0: Busy */
#define EMC_STATUS_WB (1 << 1) /* Bit 1: Write buffer status */
#define EMC_CONFIG_SA (1 << 2) /* Bit 2: Self-refresh acknowledge */
/* Bits 3-31: Reserved */
/* EMC Configuration register */
#define EMC_CONFIG_EM (1 << 0) /* Bit 0: Endian mode */
/* Bits 1-7: Reserved */
#define EMC_CONFIG_CR (1 << 8) /* Bit 8: Clock Ratio */
/* Bits 9-31: Reserved */
/* Dynamic Memory Control register */
#define EMC_DYNCONTROL_
#define EMC_DYNCONTROL_CE (1 << 0) /* Bit 0: Dynamic memory clock enable */
#define EMC_DYNCONTROL_CS (1 << 1) /* Bit 1: Dynamic memory clock control */
#define EMC_DYNCONTROL_SR (1 << 2) /* Bit 2: Self-refresh request, EMCSREFREQ */
/* Bits 3-4: Reserved */
#define EMC_DYNCONTROL_MMC (1 << 5) /* Bit 5: Memory clock control */
/* Bit 6: Reserved */
#define EMC_DYNCONTROL_SI_SHIFT (7) /* Bits 7-8: SDRAM initialization */
#define EMC_DYNCONTROL_SI_MASK (3 << EMC_DYNCONTROL_SI_SHIFT)
# define EMC_DYNCONTROL_SI_NORMAL (0 << EMC_DYNCONTROL_SI_SHIFT) /* SDRAM NORMAL command */
# define EMC_DYNCONTROL_SI_MODE (1 << EMC_DYNCONTROL_SI_SHIFT) /* SDRAM MODE command */
# define EMC_DYNCONTROL_SI_PALL (2 << EMC_DYNCONTROL_SI_SHIFT) /* SDRAM PALL (precharge all) command */
# define EMC_DYNCONTROL_SI_ MASK (3 << EMC_DYNCONTROL_SI_SHIFT) /* SDRAM NOP (no operation) command) */
/* Bits 9-31: Reserved */
/* Dynamic Memory Refresh Timer register */
#define EMC_DYNREFRESH_SHIFT (0) /* Bits 0-10: Refresh timer */
#define EMC_DYNREFRESH_MASK (0x7ff << EMC_DYNREFRESH_SHIFT)
/* Bits 11-31: Reserved */
/* Dynamic Memory Read Configuration register */
#define EMC_DYNREADCONFIG_SHIFT (0) /* Bits 0-1: Read data strategy */
#define EMC_DYNREADCONFIG_MASK (3 << EMC_DYNREADCONFIG_SHIFT)
# define EMC_DYNREADCONFIG_0p5CCLK (1 << EMC_DYNREADCONFIG_SHIFT) /* Command delayed by 0.5 CCLK */
# define EMC_DYNREADCONFIG_1p5CCLK (2 << EMC_DYNREADCONFIG_SHIFT) /* Command delayed by 1.5 CCLK */
# define EMC_DYNREADCONFIG_2p5CCLK (3 << EMC_DYNREADCONFIG_SHIFT) /* Command delayed by 2.5 CCLK */
/* Bits 2-31: Reserved */
/* Dynamic Memory Precharge Command Period register */
#define EMC_DYNRP_SHIFT (0) /* Bits 0-3: Precharge command period */
#define EMC_DYNRP_MASK (15 << EMC_DYNRP_SHIFT)
# define EMC_DYNRP(n) (((n)-1) << EMC_DYNRP_SHIFT) /* Delay n CCLK cycles */
/* Bits 2-31: Reserved */
/* Dynamic Memory Active to Precharge Command Period register */
#define EMC_DYNRAS_SHIFT (0) /* Bits 0-3: Active to precharge command period */
#define EMC_DYNRAS_MASK (15 << EMC_DYNRAS_SHIFT)
# define EMC_DYNRAS(n) (((n)-1) << EMC_DYNRAS_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Dynamic Memory Self Refresh Exit Time register */
#define EMC_DYNSREX_SHIFT (0) /* Bits 0-3: Self-refresh exit time */
#define EMC_DYNSREX_MASK (15 << EMC_DYNSREX_SHIFT)
# define EMC_DYNSREX(n) (((n)-1) << EMC_DYNSREX_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Dynamic Memory Last Data Out to Active Time register */
#define EMC_DYNAPR_SHIFT (0) /* Bits 0-3: Last-data-out to active command time */
#define EMC_DYNAPR_MASK (15 << EMC_DYNAPR_SHIFT)
# define EMC_DYNAPR(n) (((n)-1) << EMC_DYNAPR_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Dynamic Memory Data In to Active Command Time register */
#define EMC_DYNDAL_SHIFT (0) /* Bits 0-3: Data-in to active command */
#define EMC_DYNDAL_MASK (15 << EMC_DYNDAL_SHIFT)
# define EMC_DYNDAL(n) (((n)-1) << EMC_DYNDAL_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Dynamic Memory Write Recovery Time register */
#define EMC_DYNWR_SHIFT (0) /* Bits 0-3: Write recovery time */
#define EMC_DYNWR_MASK (15 << EMC_DYNWR_SHIFT)
# define EMC_DYNWR(n) (((n)-1) << EMC_DYNWR_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Dynamic Memory Active to Active Command Period register */
#define EMC_DYNRC_SHIFT (0) /* Bits 0-4: Active to active command period */
#define EMC_DYNRC_MASK (31 << EMC_DYNRC_SHIFT)
# define EMC_DYNRC(n) (((n)-1) << EMC_DYNRC_SHIFT) /* Delay n CCLK cycles */
/* Bits 5-31: Reserved */
/* Dynamic Memory Auto-refresh Period register */
#define EMC_DYNRFC_SHIFT (0) /* Bits 0-4: Auto-refresh period and
* auto-refresh to active command period */
#define EMC_DYNRFC_MASK (31 << EMC_DYNRFC_SHIFT)
# define EMC_DYNRFC(n) (((n)-1) << EMC_DYNRFC_SHIFT) /* Delay n CCLK cycles */
/* Bits 5-31: Reserved */
/* Dynamic Memory Exit Self Refresh register */
#define EMC_DYNXSR_SHIFT (0) /* Bits 0-4: Exit self-refresh to active command time */
#define EMC_DYNXSR_MASK (31 << EMC_DYNXSR_SHIFT)
# define EMC_DYNXSR(n) (((n)-1) << EMC_DYNXSR_SHIFT) /* Delay n CCLK cycles */
/* Bits 5-31: Reserved */
/* Dynamic Memory Active Bank A to Active Bank B Time register */
#define EMC_DYNRRD_SHIFT (0) /* Bits 0-3: Active bank A to active bank B latency */
#define EMC_DYNRRD_MASK (15 << EMC_DYNRRD_SHIFT)
# define EMC_DYNRRD(n) (((n)-1) << EMC_DYNRRD_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Dynamic Memory Load Mode register to Active Command Time */
#define EMC_DYNMRD_SHIFT (0) /* Bits 0-3: Load mode register to active command time */
#define EMC_DYNMRD_MASK (15 << EMC_DYNMRD_SHIFT)
# define EMC_DYNMRD(n) (((n)-1) << EMC_DYNMRD_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Static Memory Extended Wait register */
#define EMC_STATEXTWAIT_SHIFT (0) /* Bits 0-9: Extended wait time out */
#define EMC_STATEXTWAIT_MASK (0x3ff << EMC_STATEXTWAIT_SHIFT)
# define EMC_STATEXTWAIT(n) (((n)-1) << EMC_STATEXTWAIT_SHIFT) /* Delay n CCLK cycles */
/* Bits 10-31: Reserved */
/* Dynamic Memory Configuration registers */
/* Bits 0-2: Reserved */
#define EMC_DYNCONFIG_MD_SHIFT (3) /* Bits 3-4: Memory device */
#define EMC_DYNCONFIG_MD_MASK (3 << EMC_DYNCONFIG_MD_SHIFT)
# define EMC_DYNCONFIG_MD_SDRAM (0 << EMC_DYNCONFIG_MD_SHIFT) /* SDRAM (POR reset value) */
/* Bits 5-6: Reserved */
#define EMC_DYNCONFIG_AM0_SHIFT (7) /* Bits 7-12: AM0 Address mapping (see user manual) */
#define EMC_DYNCONFIG_AM0_MASK (0x3f << EMC_DYNCONFIG_AM0_SHIFT)
/* Bit 13: Reserved */
#define EMC_DYNCONFIG_AM1 (1 << 14) /* Bit 14: AM1 Address mapping (see user manual) */
/* Bits 15-18: Reserved */
#define EMC_DYNCONFIG_BENA (1 << 10) /* Bit 19: Buffer enable */
#define EMC_DYNCONFIG_WP (1 << 20) /* Bit 20: Write protect. */
/* Bits 21-31: Reserved */
/* Dynamic Memory RAS & CAS Delay registers */
#define EMC_DYNRASCAS_RAS_SHIFT (0) /* Bits 0-1: RAS latency (active to read/write delay) */
#define EMC_DYNRASCAS_RAS_MASK (3 << EMC_DYNRASCAS_RAS_SHIFT)
# define EMC_DYNRASCAS_RAS_1CCLK (1 << EMC_DYNRASCAS_RAS_SHIFT) /* One CCLK cycle */
# define EMC_DYNRASCAS_RAS_2CCLK (2 << EMC_DYNRASCAS_RAS_SHIFT) /* Two CCLK cycles */
# define EMC_DYNRASCAS_RAS_3CCLK (3 << EMC_DYNRASCAS_RAS_SHIFT) /* Three CCLK cycles (POR reset value) */
/* Bits 2-7: Reserved */
#define EMC_DYNRASCAS_CAS_SHIFT (8) /* Bits 8-9: CAS latency */
#define EMC_DYNRASCAS_CAS_MASK (3 << EMC_DYNRASCAS_CAS_SHIFT)
# define EMC_DYNRASCAS_CAS_1CCLK (1 << EMC_DYNRASCAS_CAS_SHIFT) /* One CCLK cycle */
# define EMC_DYNRASCAS_CAS_2CCLK (2 << EMC_DYNRASCAS_CAS_SHIFT) /* Two CCLK cycles */
# define EMC_DYNRASCAS_CAS_3CCLK (3 << EMC_DYNRASCAS_CAS_SHIFT) /* Three CCLK cycles (POR reset value) */
/* Bits 10-31: Reserved */
/* Static Memory Configuration registers */
#define EMC_STATCONFIG_MW_SHIFT (0) /* Bits 0-1: Memory width */
#define EMC_STATCONFIG_MW_MASK (3 << EMC_STATCONFIG_MW_SHIFT)
# define EMC_STATCONFIG_MW_8BITS (0 << EMC_STATCONFIG_MW_SHIFT)
# define EMC_STATCONFIG_MW_16BITS (1 << EMC_STATCONFIG_MW_SHIFT)
# define EMC_STATCONFIG_MW_32BITS (2 << EMC_STATCONFIG_MW_SHIFT)
/* Bit 2: Reserved */
#define EMC_STATCONFIG_PM (1 << 3) /* Bit 3: Page mode */
/* Bits 4-5: Reserved */
#define EMC_STATCONFIG_PC (1 << 6) /* Bit 6: Chip select polarity */
#define EMC_STATCONFIG_PB (1 << 7) /* Bit 7: Byte lane state */
#define EMC_STATCONFIG_EW (1 << 8) /* Bit 8: Extended wait */
/* Bits 9-18: Reserved */
#define EMC_STATCONFIG_BENA (1 << 19) /* Bit 19: Buffer enable */
#define EMC_STATCONFIG_WP (1 << 20) /* Bit 20: Write protect */
/* Bits 21-31: Reserved */
/* Static Memory Write Enable Delay registers */
#define EMC_STATWAITWEN_SHIFT (0) /* Bits 0-3: Wait write enable */
#define EMC_STATWAITWEN_MASK (15 << EMC_STATWAITWEN_SHIFT)
# define EMC_STATWAITWEN(n) (((n)-1) << EMC_STATWAITWEN_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Static Memory Output Enable Delay registers */
#define EMC_STATWAITOEN_SHIFT (0) /* Bits 0-3: Wait output enable */
#define EMC_STATWAITOEN_MASK (15 << EMC_STATWAITOEN_SHIFT)
# define EMC_STATWAITOEN(n) (((n)-1) << EMC_STATWAITOEN_SHIFT) /* Delay n CCLK cycles */
/* Bits 4-31: Reserved */
/* Static Memory Read Delay registers */
#define EMC_STATWAITRD_SHIFT (0) /* Bits 0-4: Non-page mode read wait states or
* asynchronous page mode read first access wait state */
#define EMC_STATWAITRD_MASK (31 << EMC_STATWAITRD_SHIFT)
# define EMC_STATWAITRD(n) (((n)-1) << EMC_STATWAITRD_SHIFT) /* Delay n CCLK cycles */
/* Bits 5-31: Reserved */
/* Static Memory Page Mode Read Delay registers */
#define EMC_STATWAITPAGE_SHIFT (0) /* Bits 0-4: Asynchronous page mode read after the
* first read wait states */
#define EMC_STATWAITPAGE_MASK (31 << EMC_STATWAITPAGE_SHIFT)
# define EMC_STATWAITPAGE(n) (((n)-1) << EMC_STATWAITPAGE_SHIFT) /* Delay n CCLK cycles */
/* Bits 5-31: Reserved */
/* Static Memory Write Delay registers */
#define EMC_STATWAITWR_SHIFT (0) /* Bits 0-4: Write wait states */
#define EMC_STATWAITWR_MASK (31 << EMC_STATWAITWR_SHIFT)
# define EMC_STATWAITWR(n) (((n)-1) << EMC_STATWAITWR_SHIFT) /* Delay n CCLK cycles */
/* Bits 5-31: Reserved */
/* Static Memory Turn Round Delay registers */
#define EMC_STATWAITTURN_SHIFT (0) /* Bits 0-3: Bus turnaround cycles */
#define EMC_STATWAITTURN_MASK (15 << EMC_STATWAITTURN_SHIFT)
# define EMC_STATWAITTURN(n) (((n)-1) << EMC_STATWAITTURN_SHIFT) /* Delay n CCLK cycles */
/* Bits 5-31: Reserved */
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public Data
****************************************************************************************************/
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_EMC_H */

View File

@ -0,0 +1,666 @@
/****************************************************************************************************
* arch/arm/src/lpc43xx/chip/lpc43_ethernet.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_ETHERNET_H
#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_ETHERNET_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
/****************************************************************************************************
* Pre-processor Definitions
****************************************************************************************************/
/* Register Offsets *********************************************************************************/
/* MAC Registers */
#define LPC43_ETH_MACCFG_OFFSET 0x0000 /* MAC configuration register */
#define LPC43_ETH_MACFFLT_OFFSET 0x0004 /* MAC frame filter register */
#define LPC43_ETH_MACHTHI_OFFSET 0x0008 /* MAC hash table high register */
#define LPC43_ETH_MACHTLO_OFFSET 0x000c /* MAC hash table low register */
#define LPC43_ETH_MACMIIA_OFFSET 0x0010 /* MAC MII address register */
#define LPC43_ETH_MACMIID_OFFSET 0x0014 /* MAC MII data register */
#define LPC43_ETH_MACFC_OFFSET 0x0018 /* MAC flow control register */
#define LPC43_ETH_MACVLANT_OFFSET 0x001c /* MAC VLAN tag register */
#define LPC43_ETH_MACDBG_OFFSET 0x0024 /* MAC debug register */
#define LPC43_ETH_MACRWFFLT_OFFSET 0x0028 /* MAC remote wakeup frame filter reg */
#define LPC43_ETH_MACPMTCS_OFFSET 0x002c /* MAC PMT control and status register */
#define LPC43_ETH_MACINTR_OFFSET 0x0038 /* MAC interrupt status register */
#define LPC43_ETH_MACIM_OFFSET 0x003c /* MAC interrupt mask register */
#define LPC43_ETH_MACA0HI_OFFSET 0x0040 /* MAC address 0 high register */
#define LPC43_ETH_MACA0LO_OFFSET 0x0044 /* MAC address 0 low register */
/* IEEE 1588 time stamp registers */
#define LPC43_ETH_TSCTRL_OFFSET 0x0700 /* Time stamp control register */
#define LPC43_ETH_SSINCR_OFFSET 0x0704 /* Sub-second increment register */
#define LPC43_ETH_SECONDS_OFFSET 0x0708 /* System time seconds register */
#define LPC43_ETH_NANOSEC_OFFSET 0x070c /* System time nanoseconds register */
#define LPC43_ETH_SECUPD_OFFSET 0x0710 /* System time seconds update register */
#define LPC43_ETH_NSECUPD_OFFSET 0x0714 /* System time nanoseconds update register */
#define LPC43_ETH_ADDEND_OFFSET 0x0718 /* Time stamp addend register */
#define LPC43_ETH_TGTSEC_OFFSET 0x071c /* Target time seconds register */
#define LPC43_ETH_TGTNSEC_OFFSET 0x0720 /* Target time nanoseconds register */
#define LPC43_ETH_HIGHWORD_OFFSET 0x0724 /* System time higher word seconds register */
#define LPC43_ETH_TSSTAT_OFFSET 0x0728 /* Time stamp status register */
/* DMA Registers */
#define LPC43_ETH_DMABMODE_OFFSET 0x1000 /* DMA bus mode register */
#define LPC43_ETH_DMATXPD_OFFSET 0x1004 /* DMA transmit poll demand register */
#define LPC43_ETH_DMARXPD_OFFSET 0x1008 /* DMA receive poll demand register */
#define LPC43_ETH_DMARXDLA_OFFSET 0x100c /* DMA receive descriptor list address register */
#define LPC43_ETH_DMATXDLA_OFFSET 0x1010 /* DMA transmit descriptor list address register */
#define LPC43_ETH_DMASTAT_OFFSET 0x1014 /* DMA status register */
#define LPC43_ETH_DMAOPMODE_OFFSET 0x1018 /* DMA operation mode register */
#define LPC43_ETH_DMAINTEN_OFFSET 0x101c /* DMA interrupt enable register */
#define LPC43_ETH_DMAMFBO_OFFSET 0x1020 /* DMA missed frame and buffer overflow counter register */
#define LPC43_ETH_DMARXWDT_OFFSET 0x1024 /* DMA receive status watchdog timer register */
#define LPC43_ETH_DMACHTXD_OFFSET 0x1048 /* DMA current host transmit descriptor register */
#define LPC43_ETH_DMACHRXD_OFFSET 0x104c /* DMA current host receive descriptor register */
#define LPC43_ETH_DMACHTXBUF_OFFSET 0x1050 /* DMA current host transmit buffer address register */
#define LPC43_ETH_DMACHRXBUF_OFFSET 0x1054 /* DMA current host receive buffer address register */
/* Register Base Addresses **************************************************************************/
/* MAC Registers */
#define LPC43_ETH_MACCR (LPC43_ETHERNET_BASE+LPC43_ETH_MACCFG_OFFSET)
#define LPC43_ETH_MACFFLT (LPC43_ETHERNET_BASE+LPC43_ETH_MACFFLT_OFFSET)
#define LPC43_ETH_MACHTHI (LPC43_ETHERNET_BASE+LPC43_ETH_MACHTHI_OFFSET)
#define LPC43_ETH_MACHTLO (LPC43_ETHERNET_BASE+LPC43_ETH_MACHTLO_OFFSET)
#define LPC43_ETH_MACMIIA (LPC43_ETHERNET_BASE+LPC43_ETH_MACMIIA_OFFSET)
#define LPC43_ETH_MACMIID (LPC43_ETHERNET_BASE+LPC43_ETH_MACMIID_OFFSET)
#define LPC43_ETH_MACFC (LPC43_ETHERNET_BASE+LPC43_ETH_MACFC_OFFSET)
#define LPC43_ETH_MACVLANT (LPC43_ETHERNET_BASE+LPC43_ETH_MACVLANT_OFFSET)
#define LPC43_ETH_MACDBG (LPC43_ETHERNET_BASE+LPC43_ETH_MACDBG_OFFSET)
#define LPC43_ETH_MACRWFFLT (LPC43_ETHERNET_BASE+LPC43_ETH_MACRWFFLT_OFFSET)
#define LPC43_ETH_MACPMTCS (LPC43_ETHERNET_BASE+LPC43_ETH_MACPMTCS_OFFSET)
#define LPC43_ETH_MACSR (LPC43_ETHERNET_BASE+LPC43_ETH_MACINTR_OFFSET)
#define LPC43_ETH_MACIM (LPC43_ETHERNET_BASE+LPC43_ETH_MACIM_OFFSET)
#define LPC43_ETH_MACA0HI (LPC43_ETHERNET_BASE+LPC43_ETH_MACA0HI_OFFSET)
#define LPC43_ETH_MACA0LO (LPC43_ETHERNET_BASE+LPC43_ETH_MACA0LO_OFFSET)
/* IEEE 1588 time stamp registers */
#define LPC43_ETH_TSCTRL (LPC43_ETHERNET_BASE+LPC43_ETH_TSCTRL_OFFSET)
#define LPC43_ETH_SSINCR (LPC43_ETHERNET_BASE+LPC43_ETH_SSINCR_OFFSET)
#define LPC43_ETH_SECONDS (LPC43_ETHERNET_BASE+LPC43_ETH_SECONDS_OFFSET)
#define LPC43_ETH_NANOSEC (LPC43_ETHERNET_BASE+LPC43_ETH_NANOSEC_OFFSET)
#define LPC43_ETH_SECUPD (LPC43_ETHERNET_BASE+LPC43_ETH_SECUPD_OFFSET)
#define LPC43_ETH_NSECUPD (LPC43_ETHERNET_BASE+LPC43_ETH_NSECUPD_OFFSET)
#define LPC43_ETH_ADDEND (LPC43_ETHERNET_BASE+LPC43_ETH_ADDEND_OFFSET)
#define LPC43_ETH_TGTSEC (LPC43_ETHERNET_BASE+LPC43_ETH_TGTSEC_OFFSET)
#define LPC43_ETH_TGTNSEC (LPC43_ETHERNET_BASE+LPC43_ETH_TGTNSEC_OFFSET)
#define LPC43_ETH_HIGHWORD (LPC43_ETHERNET_BASE+LPC43_ETH_HIGHWORD_OFFSET)
#define LPC43_ETH_TSSTAT (LPC43_ETHERNET_BASE+LPC43_ETH_TSSTAT_OFFSET)
/* DMA Registers */
#define LPC43_ETH_DMABMODE (LPC43_ETHERNET_BASE+LPC43_ETH_DMABMODE_OFFSET)
#define LPC43_ETH_DMATXPD (LPC43_ETHERNET_BASE+LPC43_ETH_DMATXPD_OFFSET)
#define LPC43_ETH_DMARXPD (LPC43_ETHERNET_BASE+LPC43_ETH_DMARXPD_OFFSET)
#define LPC43_ETH_DMARXDLA (LPC43_ETHERNET_BASE+LPC43_ETH_DMARXDLA_OFFSET)
#define LPC43_ETH_DMATXDLA (LPC43_ETHERNET_BASE+LPC43_ETH_DMATXDLA_OFFSET)
#define LPC43_ETH_DMASTAT (LPC43_ETHERNET_BASE+LPC43_ETH_DMASTAT_OFFSET)
#define LPC43_ETH_DMAOPMODE (LPC43_ETHERNET_BASE+LPC43_ETH_DMAOPMODE_OFFSET)
#define LPC43_ETH_DMAINTEN (LPC43_ETHERNET_BASE+LPC43_ETH_DMAINTEN_OFFSET)
#define LPC43_ETH_DMAMFBO (LPC43_ETHERNET_BASE+LPC43_ETH_DMAMFBO_OFFSET)
#define LPC43_ETH_DMARXWDT (LPC43_ETHERNET_BASE+LPC43_ETH_DMARXWDT_OFFSET)
#define LPC43_ETH_DMACHTXD (LPC43_ETHERNET_BASE+LPC43_ETH_DMACHTXD_OFFSET)
#define LPC43_ETH_DMACHRXD (LPC43_ETHERNET_BASE+LPC43_ETH_DMACHRXD_OFFSET)
#define LPC43_ETH_DMACHTXBUF (LPC43_ETHERNET_BASE+LPC43_ETH_DMACHTXBUF_OFFSET)
#define LPC43_ETH_DMACHRXBUF (LPC43_ETHERNET_BASE+LPC43_ETH_DMACHRXBUF_OFFSET)
/* Register Bit-Field Definitions *******************************************************************/
/* MAC Registers */
/* MAC configuration register */
/* Bits 0-1: Reserved */
#define ETH_MACCFG_RE (1 << 2) /* Bit 2: Receiver enable */
#define ETH_MACCFG_TE (1 << 3) /* Bit 3: Transmitter enable */
#define ETH_MACCFG_DF (1 << 4) /* Bit 4: Deferral check */
#define ETH_MACCFG_BL_SHIFT (5) /* Bits 5-6: Back-off limit */
#define ETH_MACCFG_BL_MASK (3 << ETH_MACCFG_BL_SHIFT)
# define ETH_MACCFG_BL_10 (0 << ETH_MACCFG_BL_SHIFT) /* 00: k = min (n, 10) */
# define ETH_MACCFG_BL_8 (1 << ETH_MACCFG_BL_SHIFT) /* 01: k = min (n, 8) */
# define ETH_MACCFG_BL_4 (2 << ETH_MACCFG_BL_SHIFT) /* 10: k = min (n, 4) */
# define ETH_MACCFG_BL_1 (3 << ETH_MACCFG_BL_SHIFT) /* 11: k = min (n, 1) */
#define ETH_MACCFG_ACS (1 << 7) /* Bit 7: Automatic pad/CRC stripping */
#define ETH_MACCFG_LUD (1 << 8) /* Bit 8: Link up/down */
#define ETH_MACCFG_RD (1 << 9) /* Bit 9: Disable Retry */
/* Bit 10: Reserved */
#define ETH_MACCFG_DM (1 << 11) /* Bit 11: Duplex mode */
#define ETH_MACCFG_LM (1 << 12) /* Bit 12: Loopback mode */
#define ETH_MACCFG_DO (1 << 13) /* Bit 13: Disable receive own */
#define ETH_MACCFG_FES (1 << 14) /* Bit 14: Fast Ethernet speed */
#define ETH_MACCFG_PS (1 << 15) /* Bit 15: Port select */
#define ETH_MACCFG_DCRS (1 << 16) /* Bit 16: Disable carrier sense during transmission */
#define ETH_MACCFG_IFG_SHIFT (17) /* Bits 17-19: Interframe gap */
#define ETH_MACCFG_IFG_MASK (7 << ETH_MACCFG_IFG_SHIFT)
# define ETH_MACCFG_IFG(n) ((12-((n) >> 3)) << ETH_MACCFG_IFG_SHIFT) /* n bit times, n=40,48,..96 */
#define ETH_MACCFG_JE (1 << 20) /* Bit 20: Jumbo frame enable */
/* Bit 21: Reserved */
#define ETH_MACCFG_JD (1 << 22) /* Bit 22: Jabber disable */
#define ETH_MACCFG_WD (1 << 23) /* Bit 23: Watchdog disable */
#define ETH_MACCFG_CSTF (1 << 25) /* Bits 25: CRC stripping for Type frames */
/* Bots 24-31: Reserved */
/* MAC frame filter register */
#define ETH_MACFFLT_PR (1 << 0) /* Bit 0: Promiscuous mode */
/* Bits 1-2: Reserved */
#define ETH_MACFFLT_DAIF (1 << 3) /* Bit 3: Destination address inverse filtering */
#define ETH_MACFFLT_PM (1 << 4) /* Bit 4: Pass all multicast */
#define ETH_MACFFLT_DBF (1 << 5) /* Bit 5: Disable Broadcast Frames */
#define ETH_MACFFLT_PCF_SHIFT (6) /* Bits 6-7: Pass control frames */
#define ETH_MACFFLT_PCF_MASK (3 << ETH_MACFFLT_PCF_SHIFT)
# define ETH_MACFFLT_PCF_NONE (0 << ETH_MACFFLT_PCF_SHIFT) /* Prevents all control frames */
# define ETH_MACFFLT_PCF_PAUSE (1 << ETH_MACFFLT_PCF_SHIFT) /* Prevents all except Pause control frames */
# define ETH_MACFFLT_PCF_ALL (2 << ETH_MACFFLT_PCF_SHIFT) /* Forwards all control frames */
# define ETH_MACFFLT_PCF_FILTER (3 << ETH_MACFFLT_PCF_SHIFT) /* Forwards all that pass address filter */
#define ETH_MACFFLT_SAIF (1 << 8) /* Bit 8: Source address inverse filtering */
#define ETH_MACFFLT_SAF (1 << 9) /* Bit 9: Source address filter */
/* Bits 10-30: Reserved */
#define ETH_MACFFLT_RA (1 << 31) /* Bit 31: Receive all */
/* MAC hash table high/low register (32-bit values) */
/* MAC MII address register */
#define ETH_MACMIIA_GB (1 << 0) /* Bit 0: MII busy */
#define ETH_MACMIIA_WR (1 << 1) /* Bit 1: MII write */
#define ETH_MACMIIA_CR_SHIFT (2) /* Bits 2-5: Clock range */
#define ETH_MACMIIA_CR_MASK (15 << ETH_MACMIIA_CR_SHIFT)
# define ETH_MACMIIA_CR_60_100 (0 << ETH_MACMIIA_CR_SHIFT) /* 60-100 MHz CLK_M4_ETHERNET/42 */
# define ETH_MACMIIA_CR_100_150 (1 << ETH_MACMIIA_CR_SHIFT) /* 100-150 MHz CLK_M4_ETHERNET/62 */
# define ETH_MACMIIA_CR_20_35 (2 << ETH_MACMIIA_CR_SHIFT) /* 20-35 MHz CLK_M4_ETHERNET/16 */
# define ETH_MACMIIA_CR_35_60 (3 << ETH_MACMIIA_CR_SHIFT) /* 35-60 MHz CLK_M4_ETHERNET/26 */
# define ETH_MACMIIA_CR_150_168 (4 << ETH_MACMIIA_CR_SHIFT) /* 150-168 MHz CLK_M4_ETHERNET/102 */
# define ETH_MACMIIA_CR_150_168 (5 << ETH_MACMIIA_CR_SHIFT) /* 250 - 300 MHz CLK_M4_ETHERNET/124 */
# define ETH_MACMIIA_CR_DIV42 (8 << ETH_MACMIIA_CR_SHIFT) /* 60-100 MHz CLK_M4_ETHERNET/42 */
# define ETH_MACMIIA_CR_DIV62 (9 << ETH_MACMIIA_CR_SHIFT) /* 100-150 MHz CLK_M4_ETHERNET/62 */
# define ETH_MACMIIA_CR_DIV16 (10 << ETH_MACMIIA_CR_SHIFT) /* 20-35 MHz CLK_M4_ETHERNET/16 */
# define ETH_MACMIIA_CR_DIV26 (11 << ETH_MACMIIA_CR_SHIFT) /* 35-60 MHz CLK_M4_ETHERNET/26 */
# define ETH_MACMIIA_CR_DIV102 (12 << ETH_MACMIIA_CR_SHIFT) /* 150-168 MHz CLK_M4_ETHERNET/102 */
# define ETH_MACMIIA_CR_DIV124 (13 << ETH_MACMIIA_CR_SHIFT) /* 250 - 300 MHz CLK_M4_ETHERNET/124 */
# define ETH_MACMIIA_CR_DIV42_2 (14 << ETH_MACMIIA_CR_SHIFT) /* 60-100 MHz CLK_M4_ETHERNET/42 */
# define ETH_MACMIIA_CR_DIV62_2 (15 << ETH_MACMIIA_CR_SHIFT) /* 100-150 MHz CLK_M4_ETHERNET/62 */
#define ETH_MACMIIA_MR_SHIFT (6) /* Bits 6-10: MII register */
#define ETH_MACMIIA_MR_MASK (31 << ETH_MACMIIA_MR_SHIFT)
#define ETH_MACMIIA_PA_SHIFT (11) /* Bits 11-15: PHY address */
#define ETH_MACMIIA_PA_MASK (31 << ETH_MACMIIA_PA_SHIFT)
/* Bits 16-31: Reserved */
/* MAC MII data register */
#define ETH_MACMIID_MASK (0xffff)
/* MAC flow control register */
#define ETH_MACFC_FCB (1 << 0) /* Bit 0: Flow control busy/back pressure activate */
#define ETH_MACFC_TFE (1 << 1) /* Bit 1: Transmit flow control enable */
#define ETH_MACFC_RFE (1 << 2) /* Bit 2: Receive flow control enable */
#define ETH_MACFC_UP (1 << 3) /* Bit 3: Unicast pause frame detect */
#define ETH_MACFC_PLT_SHIFT (4) /* Bits 4-5: Pause low threshold */
#define ETH_MACFC_PLT_MASK (3 << ETH_MACFC_PLT_SHIFT)
# define ETH_MACFC_PLT(n) ((n) << ETH_MACFC_PLT_SHIFT)
/* Bit 6: Reserved */
#define ETH_MACFC_DZPQ (1 << 7) /* Bit 7: Disable Zero-Quanta Pause */
/* Bits 8-15: Reserved */
#define ETH_MACFC_PT_SHIFT (16) /* Bits 16-31: Pause time */
#define ETH_MACFC_PT_MASK (0xffff << ETH_MACFC_PT_SHIFT)
/* MAC VLAN tag register */
#define ETH_MACVLANT_VL_SHIFT (0) /* Bits 0-15: VLAN tag identifier (for receive frames) */
#define ETH_MACVLANT_VL_MAS K (0xffff << ETH_MACVLANT_VLANTI_SHIFT)
#define ETH_MACVLANT_ETV (1 << 16) /* Bit 16: 12-bit VLAN tag comparison */
/* MAC debug register */
#define ETH_MACDBG_RXACTIVE (1 << 0) /* Bit 0: MAC MII receive protocol engine active */
#define ETH_MACDBG_FS0_SHIFT (1) /* Bits 1-2: MAC small FIFO read / write controllers status */
#define ETH_MACDBG_FS0_MASK (3 << ETH_MACDBG_FS0_SHIFT)
#define ETH_MACDBG_RFS1 (1 << 4) /* Bit 4: Rx FIFO write controller active */
#define ETH_MACDBG_RFS_SHIFT (5) /* Bits 5-6: Rx FIFO read controller status */
#define ETH_MACDBG_RFS_MASK (3 << ETH_MACDBG_RFS_SHIFT)
# define ETH_MACDBG_RFS_IDLE (0 << ETH_MACDBG_RFS_SHIFT) /* 00: IDLE state */
# define ETH_MACDBG_RFS_RFRAME (1 << ETH_MACDBG_RFS_SHIFT) /* 01: Reading frame data */
# define ETH_MACDBG_RFS_RSTATUS (2 << ETH_MACDBG_RFS_SHIFT) /* 10: Reading frame status (or time-stamp) */
# define ETH_MACDBG_RFS_FLUSHING (3 << ETH_MACDBG_RFS_SHIFT) /* 11: Flushing the frame data and status */
/* Bit 7: Reserved */
#define ETH_MACDBG_RFFL_SHIFT (8) /* Bits 8-9: Rx FIFO fill level */
#define ETH_MACDBG_RFFL_MASK (3 << ETH_MACDBG_RFFL_SHIFT)
# define ETH_MACDBG_RFFL_EMPTY (0 << ETH_MACDBG_RFFL_SHIFT) /* 00: RxFIFO empty */
# define ETH_MACDBG_RFFL_DEACT (1 << ETH_MACDBG_RFFL_SHIFT) /* 01: RxFIFO fill-level below flow-control de-activate threshold */
# define ETH_MACDBG_RFFL_ACTIV (2 << ETH_MACDBG_RFFL_SHIFT) /* 10: RxFIFO fill-level above flow-control activate threshold */
# define ETH_MACDBG_RFFL_FULL (3 << ETH_MACDBG_RFFL_SHIFT) /* 11: RxFIFO full */
/* Bits 10-15: Reserved */
#define ETH_MACDBG_TXACTIVE (1 << 16) /* Bit 16: MAC MII transmit engine active */
#define ETH_MACDBG_TXSTAT_SHIFT (17) /* Bits 17-18: State of the MAC transmit frame controller module */
#define ETH_MACDBG_TXSTAT_MASK (3 << ETH_MACDBG_TXSTAT_SHIFT)
# define ETH_MACDBG_TXSTAT_IDLE (0 << ETH_MACDBG_TXSTAT_SHIFT) /* 00: Idle */
# define ETH_MACDBG_TXSTAT_WAITING (1 << ETH_MACDBG_TXSTAT_SHIFT) /* 01: Waiting for Status of previous frame or IFG/backoff period to be over */
# define ETH_MACDBG_TXSTAT_PAUSE (2 << ETH_MACDBG_TXSTAT_SHIFT) /* 10: Generating and transmitting a Pause control frame */
# define ETH_MACDBG_TXSTAT_FRAME (3 << ETH_MACDBG_TXSTAT_SHIFT) /* 11: Transferring input frame for transmission */
#define ETH_MACDBG_PAUSE (1 << 19) /* Bit 19: MAC transmitter in pause */
#define ETH_MACDBG_TFRS_SHIFT (20) /* Bits 20-21: State of the TxFIFO read Controller */
#define ETH_MACDBG_TFRS_MASK (3 << ETH_MACDBG_TFRS_SHIFT)
# define ETH_MACDBG_TFRS_IDLE (0 << ETH_MACDBG_TFRS_SHIFT) /* 00: Idle state */
# define ETH_MACDBG_TFRS_READ (1 << ETH_MACDBG_TFRS_SHIFT) /* 01: Read state */
# define ETH_MACDBG_TFRS_WAITING (2 << ETH_MACDBG_TFRS_SHIFT) /* 10: Waiting for TxStatus from MAC transmitter */
# define ETH_MACDBG_TFRS_WRITING (3 << ETH_MACDBG_TFRS_SHIFT) /* 11: Writing the received TxStatus or flushing the TxFIFO */
#define ETH_MACDBG_TFS1 (1 << 22) /* Bit 22: Tx FIFO write active */
/* Bit 23: Reserved */
#define ETH_MACDBG_TFNE (1 << 24) /* Bit 24: Tx FIFO not empty */
#define ETH_MACDBG_TFF (1 << 25) /* Bit 25: Tx FIFO full */
/* Bits 26-31: Reserved */
/* MAC remote wakeup frame filter reg. Provides 32-bit access to remote remote wake-up filters. */
/* MAC PMT control and status register */
#define ETH_MACPMTCS_PD (1 << 0) /* Bit 0: Power down */
#define ETH_MACPMTCS_MPE (1 << 1) /* Bit 1: Magic Packet enable */
#define ETH_MACPMTCS_WFE (1 << 2) /* Bit 2: Wakeup frame enable */
/* Bits 3-4: Reserved */
#define ETH_MACPMTCS_MPR (1 << 5) /* Bit 5: Magic packet received */
#define ETH_MACPMTCS_WFR (1 << 6) /* Bit 6: Wakeup frame received */
#define ETH_MACPMTCS_GU (1 << 9) /* Bit 9: Global unicast */
/* Bits 10-30: Reserved */
#define ETH_MACPMTCS_WFFRPR (1 << 31) /* Bit 31: Wake-up Frame Filter Register Pointer Reset */
/* MAC interrupt status register */
/* Bits 0-2: Reserved */
#define ETH_MACINTR_PMT (1 << 3) /* Bit 3: PMT status */
/* Bits 4-8: Reserved */
#define ETH_MACINTR_TS (1 << 9) /* Bit 9: Time stamp trigger status */
/* Bits 10-31: Reserved */
/* MAC interrupt mask register */
/* Bits 0-2: Reserved */
#define ETH_MACIM_PMTIM (1 << 3) /* Bit 3: PMT interrupt mask */
/* Bits 4-8: Reserved */
#define ETH_MACIM_TSIM (1 << 9) /* Bit 9: Time stamp interrupt mask */
/* Bits 10-31: Reserved */
#define ETH_MACIM_ALLINTS (ETH_MACIM_PMTIM|ETH_MACIM_TSTIM)
/* MAC address 0 high register */
#define ETH_MACA0HI_MACA0H_SHIFT (0) /* Bits 0-15: MAC address0 high [47:32] */
#define ETH_MACA0HI_MACA0H_MASK (0xffff << ETH_MACA0HI_MACA0H_SHIFT)
/* Bits 16-30: Reserved */
#define ETH_MACA0HI_MO (1 << 31) /* Bit 31: Always 1 */
/* MAC address 0 low register (MAC address0 low [31:0]) */
/* Time stamp control register */
#define ETH_TSCTRL_TSENA (1 << 0) /* Bit 0: Time stamp enable */
#define ETH_TSCTRL_TSCFUPDT (1 << 1) /* Bit 1: Time stamp fine or coarse update */
#define ETH_TSCTRL_TSINIT (1 << 2) /* Bit 2: Time stamp initialize */
#define ETH_TSCTRL_TSUPDT (1 << 3) /* Bit 3: Time stamp up */
#define ETH_TSCTRL_TSTRIG (1 << 4) /* Bit 4: Time stamp interrupt trigger enable */
#define ETH_TSCTRL_TSADDREG (1 << 5) /* Bit 5: Addend reg update */
/* Bits 6-7: Reserved */
#define ETH_TSCTRL_TSENALL (1 << 8) /* Bit 8: Enable time stamp for all frames */
#define ETH_TSCTRL_TSCTRLSSR (1 << 9) /* Bit 9: Time stamp digital or binary rollover control */
#define ETH_TSCTRL_TSVER2ENA (1 << 10) /* Bit 10: Enable PTP packet snooping for version 2 format */
#define ETH_TSCTRL_TSIPENA (1 << 11) /* Bit 11: Enable time stamp snapshot for ptp over ethernet frames */
#define ETH_TSCTRL_TSIPV6ENA (1 << 12) /* Bit 12: Enable time stamp snapshot for IPv6 frames */
#define ETH_TSCTRL_TSIPV4ENA (1 << 13) /* Bit 13: Enable time stamp snapshot for IPv4 frames */
#define ETH_TSCTRL_TSEVNTENA (1 << 14) /* Bit 14: Enable time stamp snapshot for event messages */
#define ETH_TSCTRL_TSMSTRENA (1 << 15) /* Bit 15: Enable snapshot for messages relevant to master */
#define ETH_TSCTRL_TSCNT_SHIFT (16) /* Bits 16-17: Time stamp clock node type */
#define ETH_TSCTRL_TSCNT_MASK (3 << ETH_TSCTRL_TSCNT_SHIFT)
# define ETH_TSCTRL_TSCNT_ORDINARY (0 << ETH_TSCTRL_TSCNT_SHIFT) /* 00: Ordinary clock */
# define ETH_TSCTRL_TSCNT_BOUNDARY (1 << ETH_TSCTRL_TSCNT_SHIFT) /* 01: Boundary clock */
# define ETH_TSCTRL_TSCNT_E2E (2 << ETH_TSCTRL_TSCNT_SHIFT) /* 10: End-to-end transparent clock */
# define ETH_TSCTRL_TSCNT_P2P (3 << ETH_TSCTRL_TSCNT_SHIFT) /* 11: Peer-to-peer transparent clock */
#define ETH_TSCTRL_TSENMACADDR (1 << 18) /* Bit 18: Enable MAC address for PTP frame filtering */
/* Bits 19-31: Reserved */
/* Sub-second increment register */
#define ETH_SSINCR_MASK (0xff) /* Bits 0-7: Sub-second increment value */
/* Bits 8-31: Reserved */
/* System time seconds register (32-bit) */
/* System time nanoseconds register */
#define ETH_NANOSEC_MASK (0x7fffffff) /* Bits 0-30: Time stamp sub seconds */
#define ETH_NANOSEC_PSNT (1 << 31) /* Bit 31: Positive or negative time */
/* System time seconds update register (32-bit) */
/* System time nanoseconds update register */
#define ETH_NSECUPD_MASK (0x7fffffff) /* Bits 0-30: Time stamp sub seconds */
#define ETH_NSECUPD_ADDSUB (1 << 31) /* Bit 31: Add or subtract time */
/* Time stamp addend register (32-bit) */
/* Target time seconds register (32-bit) */
/* Target time nanoseconds register (32-bit) */
#define ETH_TGTNSEC_MASK (0x7fffffff) /* Bits 0-30: Target time stamp low */
/* Bit 31: Reserved */
/* System time higher words seconds register */
#define ETH_HIGHWORD_MASK (0x0000ffff) /* Bits 0-15:Time stamp higher word */
#define ETH_HIGHWORD_ADDSUB (1 << 31) /* Bit 31: Add or subtract time */
/* Time stamp status register */
#define ETH_TSSTAT_TSSOVF (1 << 0) /* Bit 0: Time stamp second overflow */
#define ETH_TSSTAT_TSTARGT (1 << 1) /* Bit 1: Time stamp target time reached */
/* Bits 2-31: Reserved */
/* DMA Registers */
/* DMA bus mode register */
#define ETH_DMABMODE_SWR (1 << 0) /* Bit 0: Software reset */
#define ETH_DMABMODE_DA (1 << 1) /* Bit 1: DMA arbitration scheme */
#define ETH_DMABMODE_DSL_SHIFT (2) /* Bits 2-6: Descriptor skip length */
#define ETH_DMABMODE_DSL_MASK (31 << ETH_DMABMODE_DSL_SHIFT)
# define ETH_DMABMODE_DSL(n) ((n) << ETH_DMABMODE_DSL_SHIFT)
#define ETH_DMABMODE_ATDS (1 << 7) /* Bit 7: Alternate descriptor size */
#define ETH_DMABMODE_PBL_SHIFT (8) /* Bits 8-13: Programmable burst length */
#define ETH_DMABMODE_PBL_MASK (0x3f << ETH_DMABMODE_PBL_SHIFT)
# define ETH_DMABMODE_PBL(n) ((n) << ETH_DMABMODE_PBL_SHIFT) /* n=1, 2, 4, 8, 16, 32 */
#define ETH_DMABMODE_PR_SHIFT (14) /* Bits 14-15: Rx-to-Tx priority ratio */
#define ETH_DMABMODE_PR_MASK (3 << ETH_DMABMODE_PR_SHIFT)
# define ETH_DMABMODE_PR_1TO1 (0 << ETH_DMABMODE_PR_SHIFT) /* 00: 1-to-1 */
# define ETH_DMABMODE_PR_2TO1 (1 << ETH_DMABMODE_PR_SHIFT) /* 01: 2-to-1 */
# define ETH_DMABMODE_PR_3TO1 (2 << ETH_DMABMODE_PR_SHIFT) /* 10: 3-to-1 */
# define ETH_DMABMODE_PR_4TO1 (3 << ETH_DMABMODE_PR_SHIFT) /* 11: 4-to-1 */
#define ETH_DMABMODE_FB (1 << 16) /* Bit 16: Fixed burst */
#define ETH_DMABMODE_RPBL_SHIFT (17) /* Bits 17-22: RxDMA PBL */
#define ETH_DMABMODE_RPBL_MASK (0x3f << ETH_DMABMODE_RPBL_SHIFT)
# define ETH_DMABMODE_RPBL(n) ((n) << ETH_DMABMODE_RPBL_SHIFT) /* n=1, 2, 4, 8, 16, 32 */
#define ETH_DMABMODE_USP (1 << 23) /* Bit 23: Use separate PBL */
#define ETH_DMABMODE_PBL8X (1 << 24) /* Bit 24: 8 x PBL mode */
#define ETH_DMABMODE_AAL (1 << 25) /* Bit 25: Address-aligned beats */
#define ETH_DMABMODE_MB (1 << 26) /* Bit 26: Mixed burst */
#define ETH_DMABMODE_TXPR (1 << 27) /* Bit 27: Tx DMA has higher priority than Rx DMA */
/* Bits 28-31: Reserved */
/* DMA transmit poll demand register (32-bit) */
/* DMA receive poll demand register (32-bit) */
/* DMA receive descriptor list address register (32-bit address) */
/* DMA transmit descriptor list address register (32-bit address) */
/* Interrupt bit definitions common between the DMA status register (DMASTAT) and
* the DMA interrupt enable register (DMAINTEN).
*/
#define ETH_DMAINT_TI (1 << 0) /* Bit 0: Transmit interrupt */
#define ETH_DMAINT_TPS (1 << 1) /* Bit 1: Transmit process stopped */
#define ETH_DMAINT_TU (1 << 2) /* Bit 2: Transmit buffer unavailable */
#define ETH_DMAINT_TJT (1 << 3) /* Bit 3: Transmit jabber timeout */
#define ETH_DMAINT_OVF (1 << 4) /* Bit 4: Receive overflow */
#define ETH_DMAINT_UNF (1 << 5) /* Bit 5: Transmit underflow */
#define ETH_DMAINT_RI (1 << 6) /* Bit 6: Receive interrupt */
#define ETH_DMAINT_RU (1 << 7) /* Bit 7: Receive buffer unavailable */
#define ETH_DMAINT_RPS (1 << 8) /* Bit 8: Receive process stopped */
#define ETH_DMAINT_RWT (1 << 9) /* Bit 9: Receive watchdog timeout */
#define ETH_DMAINT_ETI (1 << 10) /* Bit 10: Early transmit interrupt */
/* Bits 11-12: Reserved */
#define ETH_DMAINT_FBI (1 << 13) /* Bit 13: Fatal bus error interrupt */
#define ETH_DMAINT_ERI (1 << 14) /* Bit 14: Early receive interrupt */
#define ETH_DMAINT_AIS (1 << 15) /* Bit 15: Abnormal interrupt summary */
#define ETH_DMAINT_NIS (1 << 16) /* Bit 16: Normal interrupt summary */
/* Bits 17-31: Reserved */
/* DMA operation mode register */
/* Bit 0: Reserved */
#define ETH_DMAOPMODE_SR (1 << 1) /* Bit 1: Start/stop receive */
#define ETH_DMAOPMODE_OSF (1 << 2) /* Bit 2: Operate on second frame */
#define ETH_DMAOPMODE_RTC_SHIFT (3) /* Bits 3-4: Receive threshold control */
#define ETH_DMAOPMODE_RTC_MASK (3 << ETH_DMAOPMODE_RTC_SHIFT)
# define ETH_DMAOPMODE_RTC_64 (0 << ETH_DMAOPMODE_RTC_SHIFT)
# define ETH_DMAOPMODE_RTC_32 (1 << ETH_DMAOPMODE_RTC_SHIFT)
# define ETH_DMAOPMODE_RTC_96 (2 << ETH_DMAOPMODE_RTC_SHIFT)
# define ETH_DMAOPMODE_RTC_128 (3 << ETH_DMAOPMODE_RTC_SHIFT)
/* Bit 5: Reserved */
#define ETH_DMAOPMODE_FUF (1 << 6) /* Bit 6: Forward undersized good frames */
#define ETH_DMAOPMODE_FEF (1 << 7) /* Bit 7: Forward error frames */
/* Bits 8-12: Reserved */
#define ETH_DMAOPMODE_ST (1 << 13) /* Bit 13: Start/stop transmission */
#define ETH_DMAOPMODE_TTC_SHIFT (14) /* Bits 14-16: Transmit threshold control */
#define ETH_DMAOPMODE_TTC_MASK (7 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_64 (0 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_128 (1 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_192 (2 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_256 (3 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_40 (4 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_32 (5 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_24 (6 << ETH_DMAOPMODE_TTC_SHIFT)
# define ETH_DMAOPMODE_TTC_16 (7 << ETH_DMAOPMODE_TTC_SHIFT)
/* Bits 17-19: Reserved */
#define ETH_DMAOPMODE_FTF (1 << 20) /* Bit 20: Flush transmit FIFO */
/* Bits 21-23: Reserved */
#define ETH_DMAOPMODE_DFF (1 << 24) /* Bit 24: Disable flushing of received frames */
/* Bits 25-31: Reserved */
/* DMA missed frame and buffer overflow counter register */
#define ETH_DMAMFBO_FMC_SHIFT (0) /* Bits 0-15: Number of frames missed */
#define ETH_DMAMFBO_FMC_MASK (0xffff << ETH_DMAMFBO_FMC_SHIFT)
#define ETH_DMAMFBO_OC (1 << 16) /* Bit 16: Overflow bit for missed frame counter */
#define ETH_DMAMFBO_FMA_SHIFT (17) /* Bits 17-27: Number of frames missed by the application */
#define ETH_DMAMFBO_FMA_MASK (0x7ff << ETH_DMAMFBO_FMA_SHIFT)
#define ETH_DMAMFBO_OF (1 << 28) /* Bit 28: Overflow bit for FIFO overflow counter */
/* Bits 29-31: Reserved */
/* DMA receive status watchdog timer register */
#define ETH_DMARXWDT_MASK (0xff) /* Bits 9-6: RI watchdog timeout */
/* Bits 8-31: Reserved */
/* DMA current host transmit descriptor register (32-bit address) */
/* DMA current host receive descriptor register (32-bit address) */
/* DMA current host transmit buffer address register (32-bit address) */
/* DMA current host receive buffer address register (32-bit address) */
/* DMA Descriptors **********************************************************************************/
/* TDES0: Transmit descriptor Word0 */
#define ETH_TDES0_DB (1 << 0) /* Bit 0: Deferred bit */
#define ETH_TDES0_UF (1 << 1) /* Bit 1: Underflow error */
#define ETH_TDES0_ED (1 << 2) /* Bit 2: Excessive deferral */
#define ETH_TDES0_CC_SHIFT (3) /* Bits 3-6: Collision count */
#define ETH_TDES0_CC_MASK (15 << ETH_TDES0_CC_SHIFT)
#define ETH_TDES0_VF (1 << 7) /* Bit 7: VLAN frame */
#define ETH_TDES0_EC (1 << 8) /* Bit 8: Excessive collision */
#define ETH_TDES0_LC (1 << 9) /* Bit 9: Late collision */
#define ETH_TDES0_NC (1 << 10) /* Bit 10: No carrier */
#define ETH_TDES0_LC (1 << 11) /* Bit 11: Loss of carrier */
#define ETH_TDES0_IPE (1 << 12) /* Bit 12: IP payload error */
#define ETH_TDES0_FF (1 << 13) /* Bit 13: Frame flushed */
#define ETH_TDES0_JT (1 << 14) /* Bit 14: Jabber timeout */
#define ETH_TDES0_ES (1 << 15) /* Bit 15: Error summary */
#define ETH_TDES0_IHE (1 << 16) /* Bit 16: IP header error */
#define ETH_TDES0_TTSS (1 << 17) /* Bit 17: Transmit time stamp status */
/* Bits 18-19: Reserved */
#define ETH_TDES0_TCH (1 << 20) /* Bit 20: Second address chained */
#define ETH_TDES0_TER (1 << 21) /* Bit 21: Transmit end of ring */
/* Bits 22-24: Reserved */
#define ETH_TDES0_TTSE (1 << 25) /* Bit 25: Transmit time stamp enable */
#define ETH_TDES0_DP (1 << 26) /* Bit 26: Disable pad */
#define ETH_TDES0_DC (1 << 27) /* Bit 27: Disable CRC */
#define ETH_TDES0_FS (1 << 28) /* Bit 28: First segment */
#define ETH_TDES0_LS (1 << 29) /* Bit 29: Last segment */
#define ETH_TDES0_IC (1 << 30) /* Bit 30: Interrupt on completion */
#define ETH_TDES0_OWN (1 << 31) /* Bit 31: Own bit */
/* TDES1: Transmit descriptor Word1 */
#define ETH_TDES1_TBS1_SHIFT (0) /* Bits 0-12: Transmit buffer 1 size */
#define ETH_TDES1_TBS1_MASK (0x1fff << ETH_TDES1_TBS1_SHIFT)
#define ETH_TDES1_TBS2_SHIFT (16) /* Bits 16-28: Transmit buffer 2 size */
#define ETH_TDES1_TBS2_MASK (0x1fff << ETH_TDES1_TBS2_SHIFT)
/* TDES2: Transmit descriptor Word2 (32-bit address) */
/* TDES3: Transmit descriptor Word3 (32-bit address) */
/* TDES6: Transmit descriptor Word6 (32-bit time stamp) */
/* TDES7: Transmit descriptor Word7 (32-bit time stamp) */
/* RDES0: Receive descriptor Word0 */
#define ETH_RDES0_ESA (1 << 0) /* Bit 0: Extended status available */
#define ETH_RDES0_CE (1 << 1) /* Bit 1: CRC error */
#define ETH_RDES0_DE (1 << 2) /* Bit 2: Dribble bit error */
#define ETH_RDES0_RE (1 << 3) /* Bit 3: Receive error */
#define ETH_RDES0_RWT (1 << 4) /* Bit 4: Receive watchdog timeout */
#define ETH_RDES0_FT (1 << 5) /* Bit 5: Frame type */
#define ETH_RDES0_LC (1 << 6) /* Bit 6: Late collision */
#define ETH_RDES0_TSA (1 << 7) /* Bit 7: Time stamp available */
#define ETH_RDES0_LS (1 << 8) /* Bit 8: Last descriptor */
#define ETH_RDES0_FS (1 << 9) /* Bit 9: First descriptor */
#define ETH_RDES0_VLAN (1 << 10) /* Bit 10: VLAN tag */
#define ETH_RDES0_OE (1 << 11) /* Bit 11: Overflow error */
#define ETH_RDES0_LE (1 << 12) /* Bit 12: Length error */
#define ETH_RDES0_SAF (1 << 13) /* Bit 13: Source address filter fail */
#define ETH_RDES0_DE (1 << 14) /* Bit 14: Descriptor error */
#define ETH_RDES0_ES (1 << 15) /* Bit 15: Error summary */
#define ETH_RDES0_FL_SHIFT (16) /* Bits 16-29: Frame length */
#define ETH_RDES0_FL_MASK (0x3fff << ETH_RDES0_FL_SHIFT)
#define ETH_RDES0_AFM (1 << 30) /* Bit 30: Destination address filter fail */
#define ETH_RDES0_OWN (1 << 31) /* Bit 31: Own bit */
/* RDES1: Receive descriptor Word1 */
#define ETH_RDES1_RBS1_SHIFT (0) /* Bits 0-12: Receive buffer 1 size */
#define ETH_RDES1_RBS1_MASK (0x1fff << ETH_RDES1_RBS1_SHIFT)
/* Bit 13: Reserved */
#define ETH_RDES1_RCH (1 << 14) /* Bit 14: Second address chained */
#define ETH_RDES1_RER (1 << 15) /* Bit 15: Receive end of ring */
#define ETH_RDES1_RBS2_SHIFT (16) /* Bits 16-28: Receive buffer 2 size */
#define ETH_RDES1_RBS2_MASK (0x1fff << ETH_RDES1_RBS2_SHIFT)
/* Bit 29-31: Reserved */
/* RDES2: Receive descriptor Word2 (32-bit address) */
/* RDES3: Receive descriptor Word3 (32-bit address) */
/* RDES4: Receive descriptor Word4 */
/* Bits 0-5: Reserved */
#define ETH_RDES4_IPV4 (1 << 6) /* Bit 6: IPv4 packet received */
#define ETH_RDES4_IPV6 (1 << 7) /* Bit 7: IPv6 packet received */
#define ETH_RDES4_MT_SHIFT (8) /* Bits 8-11: Message type */
#define ETH_RDES4_MT_MASK (15 << ETH_RDES4_MT_SHIFT)
# define ETH_RDES4_MT_NONE (0 << ETH_RDES4_MT_SHIFT) /* No PTP message received */
# define ETH_RDES4_MT_SYNC (1 << ETH_RDES4_MT_SHIFT) /* SYNC (all clock types) */
# define ETH_RDES4_MT_FOLLOWUP (2 << ETH_RDES4_MT_SHIFT) /* Follow_Up (all clock types) */
# define ETH_RDES4_MT_DELAYREQ (3 << ETH_RDES4_MT_SHIFT) /* Delay_Req (all clock types) */
# define ETH_RDES4_MT_DELAYRESP (4 << ETH_RDES4_MT_SHIFT) /* Delay_Resp (all clock types) */
# define ETH_RDES4_MT_PDELREQAM (5 << ETH_RDES4_MT_SHIFT) /* Pdelay_Req (in peer-to-peer
* transparent clock) */
# define ETH_RDES4_MT_PDELREQMM (6 << ETH_RDES4_MT_SHIFT) /* Pdelay_Resp (in peer-to-peer
* transparent clock) */
# define ETH_RDES4_MT_PDELREQFUS (7 << ETH_RDES4_MT_SHIFT) /* Pdelay_Resp_Follow_Up (in
* peer-to-peer transparent clock) */
# define ETH_RDES4_MT_PDELREQFUS (8 << ETH_RDES4_MT_SHIFT) /* Announce */
# define ETH_RDES4_MT_PDELREQFUS (9 << ETH_RDES4_MT_SHIFT) /* Management */
# define ETH_RDES4_MT_PDELREQFUS (10 << ETH_RDES4_MT_SHIFT) /* Signaling */
# define ETH_RDES4_MT_PDELREQFUS (15 << ETH_RDES4_MT_SHIFT) /* PTP packet with Reserved message type */
#define ETH_RDES4_PTPTYPE (1 << 12) /* Bit 12: PTP frame type */
#define ETH_RDES4_PTPVERSION (1 << 13) /* Bit 13: PTP version */
/* Bits 14-31: Reserved */
/* RDES5: Receive descriptor Word5 - Reserved */
/* RDES6: Receive descriptor Word6 (32-bit time stamp) */
/* RDES7: Receive descriptor Word7 (32-bit time stamp) */
/****************************************************************************************************
* Public Types
****************************************************************************************************/
#ifndef __ASSEMBLY__
/* Ethernet TX DMA Descriptor. Descriptor size can be 4 DWORDS (16 bytes) or 8 DWORDS (32 bytes)
* depending on the setting of the ATDS bit in the DMA Bus Mode register.
*/
struct eth_txdesc_s
{
/* Normal DMA descriptor words */
volatile uint32_t tdes0; /* Status */
volatile uint32_t tdes1; /* Control and buffer1/2 lengths */
volatile uint32_t tdes2; /* Buffer1 address pointer */
volatile uint32_t tdes3; /* Buffer2 or next descriptor address pointer */
/* Alternate DMA descriptor with time stamp */
#ifdef CONFIG_LPC43_ETH_ALTDESC
volatile uint32_t tdes4; /* Reserved */
volatile uint32_t tdes5; /* Reserved */
volatile uint32_t tdes6; /* Time Stamp Low value for transmit and receive */
volatile uint32_t tdes7; /* Time Stamp High value for transmit and receive */
#endif
};
/* Ethernet RX DMA Descriptor. Descriptor size can be 4 DWORDS (16 bytes) or 8 DWORDS (32 bytes)
* depending on the setting of the ATDS bit in the DMA Bus Mode register.
*/
struct eth_rxdesc_s
{
volatile uint32_t rdes0; /* Status */
volatile uint32_t rdes1; /* Control and buffer1/2 lengths */
volatile uint32_t rdes2; /* Buffer1 address pointer */
volatile uint32_t rdes3; /* Buffer2 or next descriptor address pointer */
/* Alternate DMA descriptor with time stamp and PTP support */
#ifdef CONFIG_LPC43_ETH_ALTDESC
volatile uint32_t rdes4; /* Extended status for PTP receive descriptor */
volatile uint32_t rdes5; /* Reserved */
volatile uint32_t rdes6; /* Time Stamp Low value for transmit and receive */
volatile uint32_t rdes7; /* Time Stamp High value for transmit and receive */
#endif
};
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
#endif /* __ASSEMBLY__ */
#endif /* LPC43_NETHERNET > 0 */
#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_ETHERNET_H */

View File

@ -120,7 +120,7 @@
/* RTC Domain Peripherals */
#define LPC43_ALARM_BASE (LPC43_RTCPERIPH_BASE + 0x00000000)
#define LPC43_ATIMER_BASE (LPC43_RTCPERIPH_BASE + 0x00000000)
#define LPC43_BACKUP_BASE (LPC43_RTCPERIPH_BASE + 0x00001000)
#define LPC43_PMC_BASE (LPC43_RTCPERIPH_BASE + 0x00002000)
#define LPC43_CREG_BASE (LPC43_RTCPERIPH_BASE + 0x00003000)

View File

@ -1,8 +1,8 @@
/****************************************************************************************************
* arch/arm/src/stm32/chip/stm32_eth.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -722,17 +722,25 @@
#define ETH_RDES1_RBS1_MASK (0x1fff << ETH_RDES1_RBS1_SHIFT)
#define ETH_RDES1_RCH (1 << 14) /* Bit 14: Second address chained */
#define ETH_RDES1_RER (1 << 15) /* Bit 15: Receive end of ring */
#define ETH_RDES1_DIC (1 << 31) /* Bit 31: Disable interrupt on completion */
#define ETH_RDES1_RBS2_SHIFT (16) /* Bits 16-28: Receive buffer 2 size */
#define ETH_RDES1_RBS2_MASK (0x1fff << ETH_RDES1_RBS2_SHIFT)
#define ETH_RDES1_DIC (1 << 31) /* Bit 31: Disable interrupt on completion */
/* RDES2: Receive descriptor Word2 (32-bit address) */
/* RDES3: Receive descriptor Word3 (32-bit address) */
/* RDES4: Receive descriptor Word4 */
#define ETH_RDES4_PV (1 << 13) /* Bit 13: PTP version */
#define ETH_RDES4_PFT (1 << 12) /* Bit 12: PTP frame type */
#define ETH_RDES4_IPPT_SHIFT (0) /* Bits 0-2: IP payload type */
#define ETH_RDES4_IPPT_MASK (7 << ETH_RDES4_IPPT_SHIFT)
# define ETH_RDES4_IPPT_UDP (1 << ETH_RDES4_IPPT_SHIFT) /* UDP payload in IP datagram */
# define ETH_RDES4_IPPT_TCP (2 << ETH_RDES4_IPPT_SHIFT) /* TCP payload in IP datagram */
# define ETH_RDES4_IPPT_ICMP (3 << ETH_RDES4_IPPT_SHIFT) /* ICMP payload in IP datagram */
#define ETH_RDES4_IPHE (1 << 3) /* Bit 3: IP header error */
#define ETH_RDES4_IPPE (1 << 4) /* Bit 4: IP payload error */
#define ETH_RDES4_IPCB (1 << 5) /* Bit 5: IP checksum bypassed */
#define ETH_RDES4_IPV4PR (1 << 6) /* Bit 6: IPv4 packet received */
#define ETH_RDES4_IPV6PR (1 << 7) /* Bit 7: IPv6 packet received */
#define ETH_RDES4_PMT_SHIFT (8) /* Bits 8-11: PTP message type */
#define ETH_RDES4_PMT_MASK (15 << ETH_RDES4_PMT_SHIFT)
# define ETH_RDES4_PMT_NONE (0 << ETH_RDES4_PMT_SHIFT) /* No PTP message received */
@ -740,7 +748,7 @@
# define ETH_RDES4_PMT_FOLLOWUP (2 << ETH_RDES4_PMT_SHIFT) /* Follow_Up (all clock types) */
# define ETH_RDES4_PMT_DELAYREQ (3 << ETH_RDES4_PMT_SHIFT) /* Delay_Req (all clock types) */
# define ETH_RDES4_PMT_DELAYRESP (4 << ETH_RDES4_PMT_SHIFT) /* Delay_Resp (all clock types) */
# define ETH_RDES4_PMT_PDELREQAM (5 << ETH_RDES4_PMT_SHIFT) /* 0101: Pdelay_Req (in peer-to-peer
# define ETH_RDES4_PMT_PDELREQAM (5 << ETH_RDES4_PMT_SHIFT) /* Pdelay_Req (in peer-to-peer
* transparent clock) or Announce (in
* ordinary or boundary clock) */
# define ETH_RDES4_PMT_PDELREQMM (6 << ETH_RDES4_PMT_SHIFT) /* Pdelay_Resp (in peer-to-peer
@ -750,16 +758,8 @@
* peer-to-peer transparent clock) or
* Signaling (for ordinary or boundary
* clock) */
#define ETH_RDES4_IPV6PR (1 << 7) /* Bit 7: IPv6 packet received */
#define ETH_RDES4_IPV4PR (1 << 6) /* Bit 6: IPv4 packet received */
#define ETH_RDES4_IPCB (1 << 5) /* Bit 5: IP checksum bypassed */
#define ETH_RDES4_IPPE (1 << 4) /* Bit 4: IP payload error */
#define ETH_RDES4_IPHE (1 << 3) /* Bit 3: IP header error */
#define ETH_RDES4_IPPT_SHIFT (0) /* Bits 0-2: IP payload type */
#define ETH_RDES4_IPPT_MASK (7 << ETH_RDES4_IPPT_SHIFT)
# define ETH_RDES4_IPPT_UDP (1 << ETH_RDES4_IPPT_SHIFT) /* UDP payload in IP datagram */
# define ETH_RDES4_IPPT_TCP (2 << ETH_RDES4_IPPT_SHIFT) /* TCP payload in IP datagram */
# define ETH_RDES4_IPPT_ICMP (3 << ETH_RDES4_IPPT_SHIFT) /* ICMP payload in IP datagram */
#define ETH_RDES4_PFT (1 << 12) /* Bit 12: PTP frame type */
#define ETH_RDES4_PV (1 << 13) /* Bit 13: PTP version */
/* RDES5: Receive descriptor Word5 - Reserved */
/* RDES6: Receive descriptor Word6 (32-bit time stamp) */