include: nuttx: net: nxstyle error fix
Nxstyle error fix to silence the CI. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit is contained in:
Alin Jerpelea
Xiang Xiao
parent
fe4be428f5
commit
2b6cad5178
@ -114,7 +114,8 @@ struct net_driver_s; /* Forward reference */
|
||||
* The arp_ipin() function should be called by Ethernet device drivers
|
||||
* whenever an IP packet arrives from the network. The function will
|
||||
* check if the address is in the ARP cache, and if so the ARP cache entry
|
||||
* will be refreshed. If no ARP cache entry was found, a new one is created.
|
||||
* will be refreshed.
|
||||
* If no ARP cache entry was found, a new one is created.
|
||||
*
|
||||
* This function expects that an IP packet with an Ethernet header is
|
||||
* present in the d_buf buffer and that the length of the packet is in the
|
||||
@ -144,10 +145,11 @@ void arp_ipin(FAR struct net_driver_s *dev);
|
||||
* Ethernet header is present in the d_buf buffer and that the length of
|
||||
* the packet is set in the d_len field.
|
||||
*
|
||||
* When the function returns, the value of the field d_len indicates whether
|
||||
* the device driver should send out the ARP reply packet or not. If d_len
|
||||
* is zero, no packet should be sent; If d_len is non-zero, it contains the
|
||||
* length of the outbound packet that is present in the d_buf buffer.
|
||||
* When the function returns, the value of the field d_len indicates
|
||||
* whether the device driver should send out the ARP reply packet or not.
|
||||
* If d_len is zero, no packet should be sent; If d_len is non-zero, it
|
||||
* contains the length of the outbound packet that is present in the d_buf
|
||||
* buffer.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
@ -54,8 +54,8 @@
|
||||
* CONFIG_ENCX24J600 - Enabled ENCX24J600 support
|
||||
* CONFIG_ENCX24J600_SPIMODE - Controls the SPI mode
|
||||
* CONFIG_ENCX24J600_FREQUENCY - Define to use a different bus frequency
|
||||
* CONFIG_ENCX24J600_NINTERFACES - Specifies the number of physical ENCX24J600
|
||||
* devices that will be supported.
|
||||
* CONFIG_ENCX24J600_NINTERFACES - Specifies the number of physical
|
||||
* ENCX24J600 devices that will be supported.
|
||||
* CONFIG_ENCX24J600_HALFDUPPLEX - Default is full duplex
|
||||
*/
|
||||
|
||||
|
||||
@ -39,7 +39,7 @@
|
||||
#ifndef __INCLUDE_NUTTX_NET_FTMAC100_H
|
||||
#define __INCLUDE_NUTTX_NET_FTMAC100_H
|
||||
|
||||
/****************************************************************************'
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
@ -47,11 +47,11 @@
|
||||
|
||||
#ifdef CONFIG_NET_FTMAC100
|
||||
|
||||
/****************************************************************************'
|
||||
/****************************************************************************
|
||||
* Pre-processor definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Interrupt status register & interrupt mask register definitions*/
|
||||
/* Interrupt status register & interrupt mask register definitions */
|
||||
|
||||
#define FTMAC100_INT_RPKT_FINISH (1 << 0)
|
||||
#define FTMAC100_INT_NORXBUF (1 << 1)
|
||||
@ -146,7 +146,7 @@
|
||||
#define FTMAC100_RXDES1_RXBUF_SIZE(x) ((x) & 0x7ff)
|
||||
#define FTMAC100_RXDES1_EDORR (1 << 31)
|
||||
|
||||
/****************************************************************************'
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
@ -194,25 +194,25 @@ struct ftmac100_register_s
|
||||
|
||||
/* Transmit descriptor, aligned to 16 bytes */
|
||||
|
||||
struct ftmac100_txdes_s
|
||||
struct __attribute__ ((aligned(16))) ftmac100_txdes_s
|
||||
{
|
||||
uint32_t txdes0;
|
||||
uint32_t txdes1;
|
||||
uint32_t txdes2; /* TXBUF_BADR */
|
||||
uint32_t txdes3; /* not used by HW */
|
||||
} __attribute__ ((aligned(16)));
|
||||
};
|
||||
|
||||
/* Receive descriptor, aligned to 16 bytes */
|
||||
|
||||
struct ftmac100_rxdes_s
|
||||
struct __attribute__ ((aligned(16))) ftmac100_rxdes_s
|
||||
{
|
||||
uint32_t rxdes0;
|
||||
uint32_t rxdes1;
|
||||
uint32_t rxdes2; /* RXBUF_BADR */
|
||||
uint32_t rxdes3; /* not used by HW */
|
||||
} __attribute__ ((aligned(16)));
|
||||
};
|
||||
|
||||
/****************************************************************************'
|
||||
/****************************************************************************
|
||||
* Pre-processor definitions
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
/*********************************************************************************************
|
||||
/****************************************************************************
|
||||
* include/nuttx/net/gmii.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
@ -31,23 +31,23 @@
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*********************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __INCLUDE_NUTTX_NET_GMII_H
|
||||
#define __INCLUDE_NUTTX_NET_GMII_H
|
||||
|
||||
/*********************************************************************************************
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
*********************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/net/mii.h>
|
||||
|
||||
/*********************************************************************************************
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
*********************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/* MII register offsets **********************************************************************/
|
||||
/* MII register offsets *****************************************************/
|
||||
|
||||
/* Common MII management registers. The IEEE 802.3 standard specifies a
|
||||
* register set for controlling and gathering status from the PHY layer. The
|
||||
@ -71,9 +71,11 @@
|
||||
#define GMII_ERDRR 13 /* Extend Register - Data Read Register */
|
||||
#define GMII_ESTATUS MII_ESTATUS /* Extended MII status register */
|
||||
|
||||
/* Extended Registers: Registers 16-31 may be used for vendor specific abilities */
|
||||
/* Extended Registers:
|
||||
* Registers 16-31 may be used for vendor specific abilities
|
||||
*/
|
||||
|
||||
/* Micrel KSZ9021/31 Vendor Specific Register Addresses **************************************/
|
||||
/* Micrel KSZ9021/31 Vendor Specific Register Addresses *********************/
|
||||
|
||||
#define GMII_KSZ90x1_RLPBK 17 /* Remote loopback, LED mode */
|
||||
#define GMII_KSZ90x1_LINKMD 18 /* LinkMD(c) cable diagnostic */
|
||||
@ -93,7 +95,7 @@
|
||||
#define GMII_KSZ90X1_RRDPSR 261 /* RGMII RX data pad skew */
|
||||
#define GMII_KSZ90x1_ATR 263 /* Analog test register */
|
||||
|
||||
/* MII register bit settings *****************************************************************/
|
||||
/* MII register bit settings ************************************************/
|
||||
|
||||
/* MII Control register bit definitions */
|
||||
|
||||
@ -271,7 +273,7 @@
|
||||
|
||||
/* Extend Register - Data Read Register (16-bit data value) */
|
||||
|
||||
/* Micrel KSZ9021/31 Vendor Specific Register Bit Definitions ********************************/
|
||||
/* Micrel KSZ9021/31 Vendor Specific Register Bit Definitions ***************/
|
||||
|
||||
/* KSZ8021/31 Register 27: Interrupt control/status */
|
||||
|
||||
@ -293,13 +295,13 @@
|
||||
#define GMII_KSZ90x1_INT_RF (1 << 1) /* Remote fault interrupt */
|
||||
#define GMII_KSZ90x1_INT_LU (1 << 0) /* Link up interrupt */
|
||||
|
||||
/*********************************************************************************************
|
||||
/****************************************************************************
|
||||
* Type Definitions
|
||||
*********************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/*********************************************************************************************
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
*********************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef __cplusplus
|
||||
#define EXTERN extern "C"
|
||||
|
||||
@ -107,8 +107,8 @@ struct icmp_hdr_s
|
||||
uint16_t icmpchksum; /* Checksum of ICMP header and data */
|
||||
|
||||
/* All ICMP packets have an 8-byte header and variable-sized data section.
|
||||
* The first 4 bytes of the header have fixed format, while the last 4 bytes
|
||||
* depend on the type/code of that ICMP packet.
|
||||
* The first 4 bytes of the header have fixed format, while the last
|
||||
* 4 bytes depend on the type/code of that ICMP packet.
|
||||
*/
|
||||
|
||||
/* ICMP_ECHO_REQUEST and ICMP_ECHO_REPLY data */
|
||||
|
||||
@ -2,7 +2,8 @@
|
||||
* include/nuttx/net/icmpv6.h
|
||||
* Header file for the NuttX ICMPv6 stack.
|
||||
*
|
||||
* Copyright (C) 2007-2009, 2012, 2014, 2017 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2007-2009, 2012, 2014, 2017 Gregory Nutt.
|
||||
* All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* This logic was leveraged from uIP which also has a BSD-style license:
|
||||
@ -121,7 +122,7 @@
|
||||
/* Prefix option flags */
|
||||
|
||||
#define ICMPv6_PRFX_FLAG_L (1 << 7) /* On-link flag */
|
||||
#define ICMPv6_PRFX_FLAG_A (1 << 6) /* Autonomous address-configuration flag
|
||||
#define ICMPv6_PRFX_FLAG_A (1 << 6) /* Autonomous address-configuration flag */
|
||||
|
||||
/* Return with size of an option (in full octects) using the size of a link
|
||||
* layer address taking into account a header of the two-bytes.
|
||||
|
||||
@ -1,7 +1,8 @@
|
||||
/****************************************************************************
|
||||
* include/nuttx/net/ioctl.h
|
||||
*
|
||||
* Copyright (C) 2007-2008, 2010-2013, 2015-2016 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2007-2008, 2010-2013, 2015-2016 Gregory Nutt.
|
||||
* All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
/************************************************************************************************************
|
||||
/****************************************************************************
|
||||
* include/nuttx/net/ipopt.h
|
||||
* Defines values for the IPv4 header options
|
||||
*
|
||||
@ -32,20 +32,20 @@
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __INCLUDE_NUTTX_NET_IPOPT_H
|
||||
#define __INCLUDE_NUTTX_NET_IPOPT_H
|
||||
|
||||
/************************************************************************************************************
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
/************************************************************************************************************
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/* IP Header Options:
|
||||
*
|
||||
@ -99,6 +99,7 @@
|
||||
#define IPOPT_TYPE_CLASS_MASK (3 << IPOPT_TYPE_CLASS_SHIFT)
|
||||
# define IPOPT_TYPE_CLASS_CTRL (0 << IPOPT_TYPE_CLASS_SHIFT) /* Control */
|
||||
# define IPOPT_TYPE_CLASS_MEASURE (2 << IPOPT_TYPE_CLASS_SHIFT) /* Debugging and measurement */
|
||||
|
||||
#define IPOPT_TYPE_COPIED (1 << 7) /* Bit 7: IP layer must copy option to each fragment */
|
||||
#define IPOPT_TYPE_NOTCOPIED (0)
|
||||
|
||||
@ -113,7 +114,7 @@
|
||||
(uint32_t)(ptr) << 8 | (uint32_t)(data))
|
||||
|
||||
/* Option Copy Class Length Description References
|
||||
* ------ ---- ----- --------- ------------------------------------------------
|
||||
* ------ ---- ----- --------- ----------------------------------------------
|
||||
* 0 0 0 1 End of options list (RFC 791)
|
||||
* 1 0 0 1 NOP (RFC 791
|
||||
* 2 1 0 11 Security (RFC 791, RFC 1108)
|
||||
@ -235,16 +236,16 @@
|
||||
#define IPOPT_QS_TYPE \
|
||||
IPOPT_MKTYPE(IPOPT_TYPE_NOTCOPIED, IPOPT_TYPE_CLASS_CTRL, IPOPT_TYPE_OPTION_QS)
|
||||
|
||||
/************************************************************************************************************
|
||||
/****************************************************************************
|
||||
* Public Type Definitions
|
||||
************************************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************************************
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************************************
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#endif /* __INCLUDE_NUTTX_NET_IPOPT_H */
|
||||
|
||||
@ -34,9 +34,9 @@
|
||||
/* Extension headers carry optional Internet Layer information, and are
|
||||
* placed between the fixed IPv6 header and the upper-layer protocol header.
|
||||
* The headers form a chain, using the Next Header fields. The Next Header
|
||||
* field in the fixed header indicates the type of the first extension header;
|
||||
* the Next Header field of the last extension header indicates the type of
|
||||
* the upper-layer protocol header in the payload of the packet.
|
||||
* field in the fixed header indicates the type of the first extension
|
||||
* header; the Next Header field of the last extension header indicates the
|
||||
* type of the upper-layer protocol header in the payload of the packet.
|
||||
*
|
||||
* All extension headers are a multiple of 8 octets in size; some extension
|
||||
* headers require internal padding to meet this requirement.
|
||||
@ -46,8 +46,9 @@
|
||||
* processed at every intermediate node on the packet's path, including
|
||||
* sending and receiving node.
|
||||
*
|
||||
* If a node does not recognize a specific extension header, it should discard
|
||||
* the packet and send a Parameter Problem message (ICMPv6 type 4, code 1).
|
||||
* If a node does not recognize a specific extension header, it should
|
||||
* discard the packet and send a Parameter Problem message (ICMPv6 type 4,
|
||||
* code 1).
|
||||
* When a Next Header value 0 appears in a header other than the fixed header
|
||||
* a node should do the same.
|
||||
*/
|
||||
@ -79,8 +80,8 @@
|
||||
* fragmented packets (in IPv6, the traffic source must do fragmentation-
|
||||
* routers do not perform fragmentation of the packets they forward)
|
||||
* - Mobility EH is used in support of Mobile IPv6 service
|
||||
* - Authentication EH is similar in format and use to the IPv4 authentication
|
||||
* header defined in RFC2402.
|
||||
* - Authentication EH is similar in format and use to the IPv4
|
||||
* authentication header defined in RFC2402.
|
||||
* - Encapsulating Security Payload EH is similar in format and use to the
|
||||
* IPv4 ESP header defined in RFC2406 [5]. All information following the
|
||||
* Encapsulating Security Header (ESH) is encrypted and for that reason, it
|
||||
|
||||
@ -6,7 +6,8 @@
|
||||
* Copyright (C) 2007, 2009, 2011-2018 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Derived largely from portions of uIP with has a similar BSD-styple license:
|
||||
* Derived largely from portions of uIP with has a similar BSD-styple
|
||||
* license:
|
||||
*
|
||||
* Copyright (c) 2001-2003, Adam Dunkels.
|
||||
* All rights reserved.
|
||||
@ -215,8 +216,8 @@ struct netdev_varaddr_s
|
||||
#endif
|
||||
|
||||
/* This structure collects information that is specific to a specific network
|
||||
* interface driver. If the hardware platform supports only a single instance
|
||||
* of this structure.
|
||||
* interface driver. If the hardware platform supports only a single
|
||||
* instance of this structure.
|
||||
*/
|
||||
|
||||
struct devif_callback_s; /* Forward reference */
|
||||
@ -230,7 +231,8 @@ struct net_driver_s
|
||||
#ifdef CONFIG_NET
|
||||
FAR struct net_driver_s *flink;
|
||||
|
||||
/* This is the name of network device assigned when netdev_register was called.
|
||||
/* This is the name of network device assigned when netdev_register was
|
||||
* called.
|
||||
* This name is only used to support socket ioctl lookups by device name
|
||||
* Examples: "eth0"
|
||||
*/
|
||||
@ -242,7 +244,9 @@ struct net_driver_s
|
||||
|
||||
uint8_t d_flags;
|
||||
|
||||
/* Multi network devices using multiple link layer protocols are supported */
|
||||
/* Multi network devices using multiple link layer protocols are
|
||||
* supported
|
||||
*/
|
||||
|
||||
uint8_t d_lltype; /* See enum net_lltype_e */
|
||||
uint8_t d_llhdrlen; /* Link layer header size */
|
||||
@ -309,7 +313,7 @@ struct net_driver_s
|
||||
|
||||
#ifdef CONFIG_NET_TCPURGDATA
|
||||
/* This pointer points to any urgent TCP data that has been received. Only
|
||||
* present if compiled with support for urgent data (CONFIG_NET_TCPURGDATA).
|
||||
* present if compiled with support for urgent data(CONFIG_NET_TCPURGDATA).
|
||||
*/
|
||||
|
||||
FAR uint8_t *d_urgdata;
|
||||
@ -334,8 +338,8 @@ struct net_driver_s
|
||||
|
||||
uint16_t d_len;
|
||||
|
||||
/* When d_buf contains outgoing xmit data, d_sndlen is non-zero and represents
|
||||
* the amount of application data after d_appdata
|
||||
/* When d_buf contains outgoing xmit data, d_sndlen is non-zero and
|
||||
* represents the amount of application data after d_appdata
|
||||
*/
|
||||
|
||||
uint16_t d_sndlen;
|
||||
@ -579,9 +583,9 @@ void neighbor_out(FAR struct net_driver_s *dev);
|
||||
*
|
||||
* Description:
|
||||
* This function should be called before sending out a packet. The function
|
||||
* checks the destination address of the packet to see whether the target of
|
||||
* packet is ourself and then consume the packet directly by calling input
|
||||
* process functions.
|
||||
* checks the destination address of the packet to see whether the target
|
||||
* of packet is ourself and then consume the packet directly by calling
|
||||
* input process functions.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero is returned if the packet don't loop back to ourself, otherwise
|
||||
@ -594,8 +598,8 @@ int devif_loopback(FAR struct net_driver_s *dev);
|
||||
/****************************************************************************
|
||||
* Carrier detection
|
||||
*
|
||||
* Call netdev_carrier_on when the carrier has become available and the device
|
||||
* is ready to receive/transmit packets.
|
||||
* Call netdev_carrier_on when the carrier has become available and the
|
||||
* device is ready to receive/transmit packets.
|
||||
*
|
||||
* Call detdev_carrier_off when the carrier disappeared and the device has
|
||||
* moved into non operational state.
|
||||
@ -642,7 +646,8 @@ ssize_t net_ioctl_arglen(int cmd);
|
||||
*
|
||||
* buf - A pointer to the buffer over which the checksum is to be computed.
|
||||
*
|
||||
* len - The length of the buffer over which the checksum is to be computed.
|
||||
* len - The length of the buffer over which the checksum is to be
|
||||
* computed.
|
||||
*
|
||||
* Returned Value:
|
||||
* The Internet checksum of the buffer.
|
||||
|
||||
@ -137,9 +137,9 @@ struct radiodev_properties_s
|
||||
* driver must still provide its (single) reassembly buffer in d_buf;
|
||||
* that buffer is still used for the case where the packet is not
|
||||
* fragmented into many frames. In either case, the packet buffer will
|
||||
* have a size of advertised MTU of the protocol, CONFIG_NET_6LOWPAN_PKTSIZE,
|
||||
* plus CONFIG_NET_GUARDSIZE and some additional overhead for reassembly
|
||||
* state data.
|
||||
* have a size of advertised MTU of the protocol,
|
||||
* CONFIG_NET_6LOWPAN_PKTSIZE, plus CONFIG_NET_GUARDSIZE and some
|
||||
* additional overhead for reassembly state data.
|
||||
*
|
||||
* The radio network driver should then inform the network of the recipt
|
||||
* of a frame by calling sixlowpan_input() or ieee802154_input(). That
|
||||
@ -184,6 +184,7 @@ struct radio_driver_s
|
||||
#endif
|
||||
|
||||
/* MAC network driver callback functions **********************************/
|
||||
|
||||
/**************************************************************************
|
||||
* Name: r_get_mhrlen
|
||||
*
|
||||
|
||||
@ -65,6 +65,7 @@
|
||||
****************************************************************************/
|
||||
|
||||
/* Frame format definitions *************************************************/
|
||||
|
||||
/* Fragment header.
|
||||
*
|
||||
* The fragment header is used when the payload is too large to fit in a
|
||||
@ -164,7 +165,9 @@
|
||||
* Values of fields within the IPHC encoding first byte
|
||||
* (Using MS-to-LS bit numbering of the draft RFC)
|
||||
*/
|
||||
|
||||
/* Bits 0-2: 011 */
|
||||
|
||||
#define SIXLOWPAN_IPHC_TC_MASK 0x18 /* Bits 3-4: Traffic Class, Flow Label */
|
||||
# define SIXLOWPAN_IPHC_TC_00 0x00 /* ECN+DSCP+4-bit Pad+Flow Label (4 bytes) */
|
||||
# define SIXLOWPAN_IPHC_TC_01 0x08 /* ECN+2-bit Pad+ Flow Label (3 bytes), DSCP is elided. */
|
||||
@ -467,9 +470,10 @@ struct sixlowpan_reassbuf_s
|
||||
* - The io_flink field points to the next frame in the list (if enable)
|
||||
* - The last frame in the list will have io_flink == NULL.
|
||||
*
|
||||
* An non-NULL d_buf of size CONFIG_NET_6LOWPAN_PKTSIZE + CONFIG_NET_GUARDSIZE
|
||||
* must also be provided. The frame will be decompressed and placed in
|
||||
* the d_buf. Fragmented packets will also be reassembled in the d_buf as
|
||||
* An non-NULL d_buf of size CONFIG_NET_6LOWPAN_PKTSIZE +
|
||||
* CONFIG_NET_GUARDSIZE must also be provided.
|
||||
* The frame will be decompressed and placed in the d_buf.
|
||||
* Fragmented packets will also be reassembled in the d_buf as
|
||||
* they are received (meaning for the driver, that two packet buffers are
|
||||
* required: One for reassembly of RX packets and one used for TX polling).
|
||||
*
|
||||
|
||||
@ -50,7 +50,9 @@
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ***********************************************************/
|
||||
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* SLIP Configuration:
|
||||
*
|
||||
* CONFIG_NET_SLIP - Enables building of the SLIP driver
|
||||
@ -58,8 +60,8 @@
|
||||
* threads. Default: 2048
|
||||
* CONFIG_NET_SLIP_DEFPRIO - Provides the priority for SLIP RX and TX
|
||||
* threads. Default 128.
|
||||
* CONFIG_NET_NET_SLIP_PKTSIZE - Provides the size of the SLIP packet buffers.
|
||||
* Default 296
|
||||
* CONFIG_NET_NET_SLIP_PKTSIZE - Provides the size of the SLIP packet
|
||||
* buffers. Default 296
|
||||
*
|
||||
* The Linux slip module hard-codes its MTU size to 296 (40 bytes for the
|
||||
* IP+TCP headers plus 256 bytes of data). So you might as well set
|
||||
|
||||
@ -189,7 +189,7 @@ struct tcp_stats_s
|
||||
net_stats_t rst; /* Number of received TCP RST (reset) segments */
|
||||
net_stats_t rexmit; /* Number of retransmitted TCP segments */
|
||||
net_stats_t syndrop; /* Number of dropped SYNs due to too few
|
||||
available connections */
|
||||
* available connections */
|
||||
net_stats_t synrst; /* Number of SYNs for closed ports triggering a RST */
|
||||
};
|
||||
#endif
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* include/nuttx/net/w5500.h
|
||||
* WIZnet W5500 Ethernet Controller
|
||||
*
|
||||
@ -32,14 +32,14 @@
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __INCLUDE_NUTTX_NET_W5500_H
|
||||
#define __INCLUDE_NUTTX_NET_W5500_H
|
||||
|
||||
/************************************************************************************'
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
@ -48,11 +48,11 @@
|
||||
|
||||
#ifdef CONFIG_NET_W5500
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/* W5500 Register Addresses *********************************************************/
|
||||
/* W5500 Register Addresses *************************************************/
|
||||
|
||||
/* Common Register Block */
|
||||
|
||||
@ -153,7 +153,7 @@
|
||||
#define W5500_SN_KPALVTR 0x002f /* Keep alive timer */
|
||||
/* 0x0030-0xffff: Reserved */
|
||||
|
||||
/* W5500 Register Bitfield Definitions **********************************************/
|
||||
/* W5500 Register Bitfield Definitions **************************************/
|
||||
|
||||
/* Common Register Block */
|
||||
|
||||
@ -197,6 +197,7 @@
|
||||
# define PHYCFGR_OPMDC_POWER_DOWN (6 << PHYCFGR_OPMDC_SHIFT) /* Power Down mode */
|
||||
# define PHYCFGR_OPMDC_ALLCAP_AN (7 << PHYCFGR_OPMDC_SHIFT) /* All capable,
|
||||
* Auto-negotiation */
|
||||
|
||||
#define PHYCFGR_OPMD (1 << 6) /* Bit 6: Configure PHY Operation Mode */
|
||||
#define PHYCFGR_RST (1 << 7) /* Bit 7: Reset */
|
||||
|
||||
@ -238,7 +239,9 @@
|
||||
#define SN_CR_SEND_KEEP 0x22 /* Send TCP keep-alive packet */
|
||||
#define SN_CR_RECV 0x40 /* Complete received data in Socket n RX buffer */
|
||||
|
||||
/* Socket n Interrupt Register (SN_IR) and Socket n Interrupt Mask Register (SN_IMR) */
|
||||
/* Socket n Interrupt Register (SN_IR) and
|
||||
* Socket n Interrupt Mask Register (SN_IMR)
|
||||
*/
|
||||
|
||||
#define SN_INT_CON (1 << 0) /* Bit 0: Connection with peer successful */
|
||||
#define SN_INT_DISCON (1 << 1) /* Bit 1: FIN or FIN/ACK received from peer */
|
||||
@ -281,9 +284,9 @@
|
||||
#define SN_TXBUF_8KB 5
|
||||
#define SN_TXBUF_16KB 16
|
||||
|
||||
/************************************************************************************'
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/* This structure describes the lower-half interface provided by board-
|
||||
* specific logic.
|
||||
@ -308,11 +311,11 @@ struct w5500_lower_s
|
||||
void (*reset)(FAR const struct w5500_lower_s *lower, bool reset);
|
||||
};
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* Name: w5500_initialize
|
||||
*
|
||||
* Description:
|
||||
@ -326,7 +329,7 @@ struct w5500_lower_s
|
||||
*
|
||||
* Assumptions:
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
int w5500_initialize(FAR struct w5500_lower_s *lower);
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user