sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Cosmetic changes from review of last PR.

Browse Source
This commit is contained in:
Gregory Nutt 2019-04-27 07:17:09 -06:00
parent f06a2cabb5
commit 2b81d0dbb3
1 changed files with 15 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
configs/nucleo-144/include/board.h
View File

@ -61,6 +61,7 @@
************************************************************************************/
/* Clocking *************************************************************************/
/* The Nucleo-144 board provides the following clock sources:
*
* MCO: 8 MHz from MCO output of ST-LINK is used as input clock
@ -143,8 +144,6 @@
#define STM32_RCC_DCKCFGR1_DFSDM1SRC 0
#define STM32_RCC_DCKCFGR1_ADFSDM1SRC 0
/* Configure factors for PLLI2S clock */
#define CONFIG_STM32F7_PLLI2S 1
@ -253,7 +252,9 @@
# define GPIO_SDMMC2_D2 GPIO_SDMMC2_D2_1
# define GPIO_SDMMC2_D3 GPIO_SDMMC2_D3_1
#endif
/* DMA Channl/Stream Selections *****************************************************/
/* Stream selections are arbitrary for now but might become important in the future
* if we set aside more DMA channels/streams.
*
@ -287,6 +288,7 @@
#define BOARD_FLASH_WAITSTATES 7
/* LED definitions ******************************************************************/
/* The Nucleo-144 board has numerous LEDs but only three, LD1 a Green LED, LD2 a Blue
* LED and LD3 a Red LED, that can be controlled by software. The following
* definitions assume the default Solder Bridges are installed.
@ -338,6 +340,7 @@
*/
/* Button definitions ***************************************************************/
/* The STM32F7 Discovery supports one button: Pushbutton B1, labeled "User", is
* connected to GPIO PI11. A high value will be sensed when the button is depressed.
*/
@ -349,6 +352,7 @@
/* Alternate function pin selections ************************************************/
/* TIM */
#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1
#define GPIO_TIM2_CH1OUT GPIO_TIM2_CH1OUT_1
#define GPIO_TIM3_CH1OUT GPIO_TIM3_CH1OUT_1
@ -375,7 +379,7 @@
/* USART3:
* Use USART3 and the USB virtual COM port
*/
*/
#if defined(CONFIG_NUCLEO_CONSOLE_VIRTUAL)
# define GPIO_USART3_RX GPIO_USART3_RX_3
@ -397,18 +401,18 @@
* ------- --------- -----
*/
# define GPIO_UART4_RX GPIO_UART4_RX_1
# define GPIO_UART4_TX GPIO_UART4_TX_1
# define GPIO_UART4_RX GPIO_UART4_RX_1
# define GPIO_UART4_TX GPIO_UART4_TX_1
/* USART3 seems to be forced selected by the Nucleo-F746ZG kconfig - bug */
# define GPIO_USART3_RX GPIO_USART3_RX_1
# define GPIO_USART3_TX GPIO_USART3_TX_1
# define GPIO_USART3_RX GPIO_USART3_RX_1
# define GPIO_USART3_TX GPIO_USART3_TX_1
/* USART6 seems to be forced selected by the Nucleo-F722E kconfig - bug */
# define GPIO_USART6_RX GPIO_USART6_RX_2
# define GPIO_USART6_TX GPIO_USART6_TX_2
# define GPIO_USART6_RX GPIO_USART6_RX_2
# define GPIO_USART6_TX GPIO_USART6_TX_2
#endif
@ -422,6 +426,7 @@
*/
/* DMA channels *************************************************************/
/* ADC */
#define ADC1_DMA_CHAN DMAMAP_ADC1_1
@ -506,3 +511,4 @@
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_1
#endif /* __CONFIG_NUCLEO_144_INCLUDE_BOARD_H */