More files for the Cortex-M0/NUC120 port
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5659 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
7c919b80a1
commit
2e08ba1b37
@ -51,6 +51,47 @@
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
/* Clocking *************************************************************************/
|
||||
/* Crystal frequencies */
|
||||
|
||||
#define BOARD_HIGHSPEED_XTAL_FREQUENCY 12000000
|
||||
#define BOARD_LOWSPEED_XTAL_FREQUENCY 32768
|
||||
|
||||
/* PLL: The PLL must be 48MHz x N times when using USB
|
||||
*
|
||||
* FOUT = FIN x (NF/NR) x (1 / NO)
|
||||
* FIN = Input reference clock frequency
|
||||
* NF = Feedback divider
|
||||
* = (FB_DV + 2)
|
||||
* NR = Input divider
|
||||
* = (IN_DV + 2)
|
||||
* NO = 1 if OUT_DV == 0
|
||||
* 2 if OUT_DV == 1 or 2
|
||||
* 4 if OUT_DV == 3
|
||||
*
|
||||
* FOUT = 12000000 x 48 / 3 / 4
|
||||
* = 48MHz
|
||||
*/
|
||||
|
||||
#define BOARD_PLL_FIN BOARD_HIGHSPEED_XTAL_FREQUENCY
|
||||
#define BOARD_PLL_FB_DV 46
|
||||
#define BOARD_PLL_NF (BOARD_PLL_FB_DV+2)
|
||||
#define BOARD_PLL_IN_DV 1
|
||||
#define BOARD_PLL_NR (BOARD_PLL_IN_DV+2)
|
||||
#define BOARD_PLL_OUT_DV 3
|
||||
#define BOARD_PLL_NO 4
|
||||
|
||||
#define BOARD_PLL_FOUT \
|
||||
(BOARD_PLL_FIN * BOARD_PLL_NF / BOARD_PLL_NR / BOARD_PLL_NO)
|
||||
|
||||
/* HCLK. FOUT is the HCLK source clock. */
|
||||
|
||||
#define BOARD_HCLK_N 0
|
||||
#define BOARD_HCLK_FREQUENCY (BOARD_PLL_FOUT / (BOARD_HCLK_N + 1))
|
||||
|
||||
/* USB. FOUT is the source. The USB CLK must be 48MHz */
|
||||
|
||||
#define BOARD_USB_N 0
|
||||
#define BOARD_USB_FREQUENCY (BOARD_PLL_FOUT / (BOARD_USB_N + 1))
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
/* The NuTiny has a single green LED that can be controlled from sofware. This LED
|
||||
|
||||
@ -414,7 +414,7 @@ CONFIG_DISABLE_MOUNTPOINT=y
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
CONFIG_MM_REGIONS=1
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
|
||||
113
configs/nutiny-nuc120/scripts/ld.script
Normal file
113
configs/nutiny-nuc120/scripts/ld.script
Normal file
@ -0,0 +1,113 @@
|
||||
/****************************************************************************
|
||||
* configs/nutiny-nuc120/scripts/ld.script
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The NUC120LE3AN has 128Kb of FLASH beginning at address 0x0000:0000 and
|
||||
* 16Kb of SRAM at address 0x20000000.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x00000000, LENGTH = 128K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 16K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@ -103,10 +103,14 @@
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledinit
|
||||
* Name: nuc_ledinit
|
||||
*
|
||||
* Description:
|
||||
* Initialize the on-board LED
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledinit(void)
|
||||
void nuc_ledinit(void)
|
||||
{
|
||||
nuc_configgpio(GPIO_LED);
|
||||
}
|
||||
|
||||
@ -52,7 +52,7 @@
|
||||
|
||||
/* NuTiny-EVB-120 GPIOs *****************************************************************************/
|
||||
/* The NuTiny has a single green LED that can be controlled from sofware. This LED
|
||||
* is connected to PIN17. It is pulled high so a low value will illuminate the LED.
|
||||
* is connected to PIN17 (PB.0). It is pulled high so a low value will illuminate the LED.
|
||||
*
|
||||
* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
|
||||
* NuTiny. The following definitions describe how NuttX controls the LEDs:
|
||||
@ -71,6 +71,8 @@
|
||||
* LED_IDLE NUC1XX is is sleep mode (Optional, not used)
|
||||
*/
|
||||
|
||||
#define GPIO_LED (GPIO_OUTPUT | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
|
||||
|
||||
/* Button definitions ***************************************************************/
|
||||
/* The NuTiny has no buttons */
|
||||
|
||||
@ -111,6 +113,19 @@ void weak_function nuc_spiinitialize(void);
|
||||
void weak_function nuc_usbinitialize(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************************************
|
||||
* Name: nuc_ledinit
|
||||
*
|
||||
* Description:
|
||||
* Initialize the on-board LED
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void nuc_ledinit(void);
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_NUTINY_NUC120_SRC_NUTINY_NUC120_H */
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user