AT91SAM3 now supports kernel-mode heap; SAM3U-EK knsh configuration converted to use kconfig-frontends tool

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5726 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2013-03-10 19:31:10 +00:00
parent 263b317427
commit 2e625a0c22
4 changed files with 605 additions and 510 deletions

View File

@ -1,44 +0,0 @@
############################################################################
# configs/sam3u-ek/nsh/appconfig
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/nsh
# The NSH library
CONFIGURED_APPS += system/readline
CONFIGURED_APPS += nshlib

File diff suppressed because it is too large Load Diff

View File

@ -35,36 +35,47 @@
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c
CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c up_lcd.c
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif
ifeq ($(CONFIG_SAM3U_HSMCI),y)
CSRCS += up_mmcsd.c
CSRCS += up_lcd.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif
ifeq ($(CONFIG_SAM3U_HSMCI),y)
CSRCS += up_mmcsd.c
endif
ifeq ($(CONFIG_USBMSC),y)
CSRCS += up_usbmsc.c
CSRCS += up_usbmsc.c
endif
ifeq ($(CONFIG_INPUT_ADS7843E),y)
CSRCS += up_touchscreen.c
CSRCS += up_touchscreen.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
COBJS = $(CSRCS:.c=$(OBJEXT))
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}"
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/common}"
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
CFLAGS += -I$(ARCH_SRCDIR)/chip
CFLAGS += -I$(ARCH_SRCDIR)/common
CFLAGS += -I$(ARCH_SRCDIR)/armv7-m
endif
all: libboard$(LIBEXT)

View File

@ -61,27 +61,22 @@
/* PORT and SLOT number probably depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_SAM3UEK
# define NSH_HAVEUSBDEV 1
# define NSH_HAVEMMCSD 1
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_NSH_MMCSDSLOTNO
# endif
# ifndef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO 0
# endif
#else
/* Add configuration for new SAM3U boards here */
# error "Unrecognized SAM3U board"
# undef NSH_HAVEUSBDEV
# undef NSH_HAVEMMCSD
#define NSH_HAVE_USBDEV 1
#define NSH_HAVE_MMCSD 1
#if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_NSH_MMCSDSLOTNO
#endif
#ifndef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO 0
#endif
/* Can't support USB features if USB is not enabled */
#ifndef CONFIG_USBDEV
# undef NSH_HAVEUSBDEV
# undef NSH_HAVE_USBDEV
#endif
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
@ -89,7 +84,7 @@
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_SAM3U_HSMCI)
# undef NSH_HAVEMMCSD
# undef NSH_HAVE_MMCSD
#endif
#ifndef CONFIG_NSH_MMCSDMINOR
@ -126,7 +121,7 @@
int nsh_archinitialize(void)
{
#ifdef NSH_HAVEMMCSD
#ifdef NSH_HAVE_MMCSD
FAR struct sdio_dev_s *sdio;
int ret;