SAMA5 CAN: Add register definition file

This commit is contained in:
Gregory Nutt 2013-10-21 12:22:27 -06:00
parent f890af8e53
commit 2edc58e383

View File

@ -0,0 +1,321 @@
/************************************************************************************
* arch/arm/src/sama5/chip/sam_can.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_SAMA5_CHIP_SAM_CAN_H
#define __ARCH_ARM_SRC_SAMA5_CHIP_SAM_CAN_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "chip/sam_memorymap.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
#define SAM_CAN_NMAILBOXES 8
/* CAN Register Offsets *************************************************************/
#define SAM_CAN_MR_OFFSET 0x0000 /* Mode Register */
#define SAM_CAN_IER_OFFSET 0x0004 /* Interrupt Enable Register */
#define SAM_CAN_IDR_OFFSET 0x0008 /* Interrupt Disable Register */
#define SAM_CAN_IMR_OFFSET 0x000c /* Interrupt Mask Register */
#define SAM_CAN_SR_OFFSET 0x0010 /* Status Register */
#define SAM_CAN_BR_OFFSET 0x0014 /* Baudrate Register */
#define SAM_CAN_TIM_OFFSET 0x0018 /* Timer Register */
#define SAM_CAN_TIMESTP_OFFSET 0x001c /* Timestamp Register */
#define SAM_CAN_ECR_OFFSET 0x0020 /* Error Counter Register */
#define SAM_CAN_TCR_OFFSET 0x0024 /* Transfer Command Register */
#define SAM_CAN_ACR_OFFSET 0x0028 /* Abort Command Register */
#define SAM_CAN_WPMR_OFFSET 0x00e4 /* Write Protect Mode Register */
#define SAM_CAN_WPSR_OFFSET 0x00e8 /* Write Protect Status Register */
#define SAM_CAN_MBn_OFFSET(n) (0x0200 + ((n) << 5))
#define SAM_CAN_MMR_OFFSET 0x0000 /* Mailbox Mode Register */
#define SAM_CAN_MAM_OFFSET 0x0004 /* Mailbox Acceptance Mask Register */
#define SAM_CAN_MID_OFFSET 0x0008 /* Mailbox ID Register */
#define SAM_CAN_MFID_OFFSET 0x000c /* Mailbox Family ID Register */
#define SAM_CAN_MSR_OFFSET 0x0010 /* Mailbox Status Register */
#define SAM_CAN_MDL_OFFSET 0x0014 /* Mailbox Data Low Register */
#define SAM_CAN_MDH_OFFSET 0x0018 /* Mailbox Data High Register */
#define SAM_CAN_MCR_OFFSET 0x001c /* Mailbox Control Register */
#define SAM_CAN_MnMR_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MMR_OFFSET)
#define SAM_CAN_MnAM_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MAM_OFFSET)
#define SAM_CAN_MnID_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MID_OFFSET)
#define SAM_CAN_MnFID_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MFID_OFFSET)
#define SAM_CAN_MnSR_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MSR_OFFSET)
#define SAM_CAN_MnDL_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MDL_OFFSET)
#define SAM_CAN_MnDH_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MDH_OFFSET)
#define SAM_CAN_MnCR_OFFSET(n) (SAM_CAN_MAILBOX_OFFSET(n)+SAM_CAN_MCR_OFFSET)
/* CAN Register Addresses ***********************************************************/
#define SAM_CAN0_MR (SAM_CAN0_VBASE+SAM_CAN_MR_OFFSET)
#define SAM_CAN0_IER (SAM_CAN0_VBASE+SAM_CAN_IER_OFFSET)
#define SAM_CAN0_IDR (SAM_CAN0_VBASE+SAM_CAN_IDR_OFFSET)
#define SAM_CAN0_IMR (SAM_CAN0_VBASE+SAM_CAN_IMR_OFFSET)
#define SAM_CAN0_SR (SAM_CAN0_VBASE+SAM_CAN_SR_OFFSET)
#define SAM_CAN0_BR (SAM_CAN0_VBASE+SAM_CAN_BR_OFFSET)
#define SAM_CAN0_TIM (SAM_CAN0_VBASE+SAM_CAN_TIM_OFFSET)
#define SAM_CAN0_TIMESTP (SAM_CAN0_VBASE+SAM_CAN_TIMESTP_OFFSET)
#define SAM_CAN0_ECR (SAM_CAN0_VBASE+SAM_CAN_ECR_OFFSET)
#define SAM_CAN0_TCR (SAM_CAN0_VBASE+SAM_CAN_TCR_OFFSET)
#define SAM_CAN0_ACR (SAM_CAN0_VBASE+SAM_CAN_ACR_OFFSET)
#define SAM_CAN0_WPMR (SAM_CAN0_VBASE+SAM_CAN_WPMR_OFFSET)
#define SAM_CAN0_WPSR (SAM_CAN0_VBASE+SAM_CAN_WPSR_OFFSET)
#define SAM_CAN0_MB_BASE(n) (SAM_CAN0_VBASE+SAM_CAN_MBn_OFFSET(n))
#define SAM_CAN0_MMR(n) (SAM_CAN0_VBASE+SAM_CAN_MnMR_OFFSET(n))
#define SAM_CAN0_MAM(n) (SAM_CAN0_VBASE+SAM_CAN_MnAM_OFFSET(n))
#define SAM_CAN0_MID(n) (SAM_CAN0_VBASE+SAM_CAN_MnID_OFFSET(n))
#define SAM_CAN0_MFID(n) (SAM_CAN0_VBASE+SAM_CAN_MnFID_OFFSET(n))
#define SAM_CAN0_MSR(n) (SAM_CAN0_VBASE+SAM_CAN_MnSR_OFFSET(n))
#define SAM_CAN0_MDL(n) (SAM_CAN0_VBASE+SAM_CAN_MnDL_OFFSET(n))
#define SAM_CAN0_MDH(n) (SAM_CAN0_VBASE+SAM_CAN_MnDH_OFFSET(n))
#define SAM_CAN0_MCR(n) (SAM_CAN0_VBASE+SAM_CAN_MnCR_OFFSET(n))
#define SAM_CAN1_MR (SAM_CAN1_VBASE+SAM_CAN_MR_OFFSET)
#define SAM_CAN1_IER (SAM_CAN1_VBASE+SAM_CAN_IER_OFFSET)
#define SAM_CAN1_IDR (SAM_CAN1_VBASE+SAM_CAN_IDR_OFFSET)
#define SAM_CAN1_IMR (SAM_CAN1_VBASE+SAM_CAN_IMR_OFFSET)
#define SAM_CAN1_SR (SAM_CAN1_VBASE+SAM_CAN_SR_OFFSET)
#define SAM_CAN1_BR (SAM_CAN1_VBASE+SAM_CAN_BR_OFFSET)
#define SAM_CAN1_TIM (SAM_CAN1_VBASE+SAM_CAN_TIM_OFFSET)
#define SAM_CAN1_TIMESTP (SAM_CAN1_VBASE+SAM_CAN_TIMESTP_OFFSET)
#define SAM_CAN1_ECR (SAM_CAN1_VBASE+SAM_CAN_ECR_OFFSET)
#define SAM_CAN1_TCR (SAM_CAN1_VBASE+SAM_CAN_TCR_OFFSET)
#define SAM_CAN1_ACR (SAM_CAN1_VBASE+SAM_CAN_ACR_OFFSET)
#define SAM_CAN1_WPMR (SAM_CAN1_VBASE+SAM_CAN_WPMR_OFFSET)
#define SAM_CAN1_WPSR (SAM_CAN1_VBASE+SAM_CAN_WPSR_OFFSET)
#define SAM_CAN1_MB_BASE(n) (SAM_CAN1_VBASE+SAM_CAN_MBn_OFFSET(n))
#define SAM_CAN1_MMR(n) (SAM_CAN1_VBASE+SAM_CAN_MnMR_OFFSET(n))
#define SAM_CAN1_MAM(n) (SAM_CAN1_VBASE+SAM_CAN_MnAM_OFFSET(n))
#define SAM_CAN1_MID(n) (SAM_CAN1_VBASE+SAM_CAN_MnID_OFFSET(n))
#define SAM_CAN1_MFID(n) (SAM_CAN1_VBASE+SAM_CAN_MnFID_OFFSET(n))
#define SAM_CAN1_MSR(n) (SAM_CAN1_VBASE+SAM_CAN_MnSR_OFFSET(n))
#define SAM_CAN1_MDL(n) (SAM_CAN1_VBASE+SAM_CAN_MnDL_OFFSET(n))
#define SAM_CAN1_MDH(n) (SAM_CAN1_VBASE+SAM_CAN_MnDH_OFFSET(n))
#define SAM_CAN1_MCR(n) (SAM_CAN1_VBASE+SAM_CAN_MnCR_OFFSET(n))
/* CAN Register Bit Definitions *****************************************************/
/* Mode Register */
#define CAN_MR_CANEN (1 << 0) /* Bit 0: CAN Controller Enable */
#define CAN_MR_LPM (1 << 1) /* Bit 1: Disable/Enable Low-power Mode */
#define CAN_MR_ABM (1 << 2) /* Bit 2: Disable/Enable Autobaud/Listen mode */
#define CAN_MR_OVL (1 << 3) /* Bit 3: Disable/Enable Overload Frame */
#define CAN_MR_TEOF (1 << 4) /* Bit 4: Timestamp Messages at each End of Frame */
#define CAN_MR_TTM (1 << 5) /* Bit 5: Disable/Enable Time Triggered Mode */
#define CAN_MR_TIMFRZ (1 << 6) /* Bit 6: Enable Timer Freeze */
#define CAN_MR_DRPT (1 << 7) /* Bit 7: Disable Repeat */
/* Interrupt Enable Register, Interrupt Disable Register, Interrupt Mask Register,
* and Status Register
*/
#define CAN_INT_MB(n) (1 << (n)) /* Bit n: Mailbox n Event */
#define CAN_INT_MB0 (1 << 0) /* Bit 0: Mailbox 0 Event */
#define CAN_INT_MB1 (1 << 1) /* Bit 1: Mailbox 1 Event */
#define CAN_INT_MB2 (1 << 2) /* Bit 2: Mailbox 2 Event */
#define CAN_INT_MB3 (1 << 3) /* Bit 3: Mailbox 3 Event */
#define CAN_INT_MB4 (1 << 4) /* Bit 4: Mailbox 4 Event */
#define CAN_INT_MB5 (1 << 5) /* Bit 5: Mailbox 5 Event */
#define CAN_INT_MB6 (1 << 6) /* Bit 6: Mailbox 6 Event */
#define CAN_INT_MB7 (1 << 7) /* Bit 7: Mailbox 7 Event */
#define CAN_INT_ERRA (1 << 16) /* Bit 16: Error Active Mode */
#define CAN_INT_WARN (1 << 17) /* Bit 17: Warning Limit */
#define CAN_INT_ERRP (1 << 18) /* Bit 18: Error Passive Mode */
#define CAN_INT_BOFF (1 << 19) /* Bit 19: Bus Off Mode */
#define CAN_INT_SLEEP (1 << 20) /* Bit 20: CAN Controller in Low-power Mode */
#define CAN_INT_WAKEUP (1 << 21) /* Bit 21: Wake-up Interrupt Enable */
#define CAN_INT_TOVF (1 << 22) /* Bit 22: Timer Overflow */
#define CAN_INT_TSTP (1 << 23) /* Bit 23: Timestamp */
#define CAN_INT_CERR (1 << 24) /* Bit 24: Mailbox CRC Error */
#define CAN_INT_SERR (1 << 25) /* Bit 25: Mailbox Stuffing Error */
#define CAN_INT_AERR (1 << 26) /* Bit 26: Acknowledgment Error */
#define CAN_INT_FERR (1 << 27) /* Bit 27: Form Error */
#define CAN_INT_BERR (1 << 28) /* Bit 28: Bit Error */
#define CAN_SR_RBSY (1 << 29) /* Bit 29: Receiver busy */
#define CAN_SR_TBSY (1 << 30) /* Bit 30: Transmitter busy */
#define CAN_SR_OVLSY (1 << 31) /* Bit 31: Overload busy */
/* Baudrate Register */
#define CAN_BR_PHASE2_SHIFT (0) /* Bits 0-2: Phase 2 segment */
#define CAN_BR_PHASE2_MASK (7 << CAN_BR_PHASE2_SHIFT)
# define CAN_BR_PHASE2(n) ((uint32_t)(n) << CAN_BR_PHASE2_SHIFT)
#define CAN_BR_PHASE1_SHIFT (4) /* Bits 4-6: Phase 1 segment */
#define CAN_BR_PHASE1_MASK (7 << CAN_BR_PHASE1_SHIFT)
# define CAN_BR_PHASE1(n) ((uint32_t)(n) << CAN_BR_PHASE1_SHIFT)
#define CAN_BR_PROPAG_SHIFT (8) /* Bits 8-10: Programming time segment */
#define CAN_BR_PROPAG_MASK (7 << CAN_BR_PROPAG_SHIFT)
# define CAN_BR_PROPAG(n) ((uint32_t)(n) << CAN_BR_PROPAG_SHIFT)
#define CAN_BR_SJW_SHIFT (12) /* Bits 12-13: Re-synchronization jump width */
#define CAN_BR_SJW_MASK (3 << CAN_BR_SJW_SHIFT)
# define CAN_BR_SJW(n) ((uint32_t)(n) << CAN_BR_SJW_SHIFT)
#define CAN_BR_BRP_SHIFT (16) /* Bits 16-22: Baudrate Prescaler */
#define CAN_BR_BRP_MASK (0x7f << CAN_BR_BRP_SHIFT)
# define CAN_BR_BRP(n) ((uint32_t)(n) << CAN_BR_BRP_SHIFT)
#define CAN_BR_SMP (1 << 24) /* Bit 24: Sampling Mode */
/* Timer Register */
#define CAN_TIM_MASK (0xffff) /* Bit 0-15: Timer */
/* Timestamp Register */
#define CAN_TIMESTP_MASK (0xffff) /* Bit 0-15: Timestamp */
/* Error Counter Register */
#define CAN_ECR_REC_SHIFT (0) /* Bits 0-7: Receive Error Counter */
#define CAN_ECR_REC_MASK (0xff << CAN_ECR_REC_SHIFT)
#define CAN_ECR_TEC_SHIFT (16) /* Bits 16-24: Transmit Error Counter */
#define CAN_ECR_TEC_MASK (0x1ff << CAN_ECR_TEC_SHIFT)
/* Transfer Command Register */
#define CAN_TCR_MB(n) (1 << (n)) /* Bit n: Transfer Request for Mailbox n */
#define CAN_TCR_MB0 (1 << 0) /* Bit 0: Transfer Request for Mailbox 0 */
#define CAN_TCR_MB1 (1 << 1) /* Bit 1: Transfer Request for Mailbox 1 */
#define CAN_TCR_MB2 (1 << 2) /* Bit 2: Transfer Request for Mailbox 2 */
#define CAN_TCR_MB3 (1 << 3) /* Bit 3: Transfer Request for Mailbox 3 */
#define CAN_TCR_MB4 (1 << 4) /* Bit 4: Transfer Request for Mailbox 4 */
#define CAN_TCR_MB5 (1 << 5) /* Bit 5: Transfer Request for Mailbox 5 */
#define CAN_TCR_MB6 (1 << 6) /* Bit 6: Transfer Request for Mailbox 6 */
#define CAN_TCR_MB7 (1 << 7) /* Bit 7: Transfer Request for Mailbox 7 */
#define CAN_TCR_TIMRST (1 << 31) /* Bit 31: Timer Reset */
/* Abort Command Register */
#define CAN_ACR_MB(n) (1 << (n)) /* Bit n: Abort Request for Mailbox n */
#define CAN_ACR_MB0 (1 << 0) /* Bit 0: Abort Request for Mailbox 0 */
#define CAN_ACR_MB1 (1 << 1) /* Bit 1: Abort Request for Mailbox 1 */
#define CAN_ACR_MB2 (1 << 2) /* Bit 2: Abort Request for Mailbox 2 */
#define CAN_ACR_MB3 (1 << 3) /* Bit 3: Abort Request for Mailbox 3 */
#define CAN_ACR_MB4 (1 << 4) /* Bit 4: Abort Request for Mailbox 4 */
#define CAN_ACR_MB5 (1 << 5) /* Bit 5: Abort Request for Mailbox 5 */
#define CAN_ACR_MB6 (1 << 6) /* Bit 6: Abort Request for Mailbox 6 */
#define CAN_ACR_MB7 (1 << 7) /* Bit 6: Abort Request for Mailbox 7 */
/* Write Protect Mode Register */
#define CAN_WPMR_WPEN (1 << 0) /* Bit 0: Write Protection Enable */
#define CAN_WPMR_WPKEY_SHIFT (8) /* Bits 8-31: CAN Write Protection Key Password */
#define CAN_WPMR_WPKEY_MASK (0xffffff << CAN_WPMR_WPKEY_SHIFT)
# define CAN_WPMR_WPKEY (0x43414e << CAN_WPMR_WPKEY_SHIFT) /* "CAN" in ASCII */
/* Write Protect Status Register */
#define CAN_WPSR_WPVS (1 << 0) /* Bit 0: Write Protection Violation Status */
#define CAN_WPSR_WPVSRC_SHIFT (8) /* Bits 8-15: Write Protection Violation Source */
#define CAN_WPSR_WPVSRC_MASK (0xff << CAN_WPSR_WPVSRC_SHIFT)
/* Mailbox Mode Register */
#define CAN_MMR_MTIMEMARK_SHIFT (0) /* Bits 0-15: Mailbox Timemark */
#define CAN_MMR_MTIMEMARK_MASK (0xffff << CAN_MMR_MTIMEMARK_SHIFT)
# define CAN_MMR_MTIMEMARK(n) ((uint32_t)(n) << 19)
#define CAN_MMR_PRIOR_SHIFT (16) /* Bits 16-nn: Mailbox Priority */
#define CAN_MMR_PRIOR_MASK (15 << CAN_MMR_PRIOR_SHIFT)
# define CAN_MMR_PRIOR(n) ((uint32_t)(n) << CAN_MMR_PRIOR_SHIFT)
#define CAN_MMR_MOT_SHIFT (24) /* Bits 24-26: Mailbox Object Type */
#define CAN_MMR_MOT_MASK (7 << CAN_MMR_MOT_SHIFT)
# define CAN_MMR_MOT_DISABLED (0 << CAN_MMR_MOT_SHIFT) /* Mailbox is disabled */
# define CAN_MMR_MOT_RX (1 << CAN_MMR_MOT_SHIFT) /* Reception Mailbox */
# define CAN_MMR_MOT_RXOVRWR (2 << CAN_MMR_MOT_SHIFT) /* Reception mailbox with overwrite */
# define CAN_MMR_MOT_TX (3 << CAN_MMR_MOT_SHIFT) /* Transmit mailbox */
# define CAN_MMR_MOT_CONSUMER (4 << CAN_MMR_MOT_SHIFT) /* Consumer Mailbox */
# define CAN_MMR_MOT_PRODUCER (5 << CAN_MMR_MOT_SHIFT) /* Producer Mailbox */
/* Mailbox Acceptance Mask Register */
#define CAN_MAM_MIDvB_SHIFT (0) /* Bits 0-17: Complementary bits for identifier */
#define CAN_MAM_MIDvB_MASK (0x3ffff << CAN_MAM_MIDvB_SHIFT)
# define CAN_MAM_MIDvB(n) ((uint32_t)(n) << CAN_MAM_MIDvB_SHIFT)
#define CAN_MAM_MIDvA_SHIFT (18) /* Bits 18-28: Identifier for standard frame mode */
#define CAN_MAM_MIDvA_MASK (0x7ff << CAN_MAM_MIDvA_SHIFT)
# define CAN_MAM_MIDvA(n) ((uint32_t)(n) << CAN_MAM_MIDvA_SHIFT)
#define CAN_MAM_MIDE (1 << 29) /* Bit 29: Identifier Version */
/* Mailbox ID Register */
#define CAN_MID_MIDvB_SHIFT (0) /* Bits 0-17: Complementary bits for identifier */
#define CAN_MID_MIDvB_MASK (0x3ffff << CAN_MID_MIDvB_SHIFT)
# define CAN_MID_MIDvB(n) ((uint32_t)(n) << CAN_MID_MIDvB_SHIFT)
#define CAN_MID_MIDvA_SHIFT (18) /* Bits 18-28: Identifier for standard frame mode */
#define CAN_MID_MIDvA_MASK (0x7ff << CAN_MID_MIDvA_SHIFT)
# define CAN_MID_MIDvA(n) ((uint32_t)(n) << CAN_MID_MIDvA_SHIFT)
#define CAN_MID_MIDE (1 << 29) /* Bit 19: Identifier Version */
/* Mailbox Family ID Register */
#define CAN_MFID_MASK (0x1fffffff)
/* Mailbox Status Register */
#define CAN_MSR_MTIMESTAMP_SHIFT (0) /* Bits 0-15: Timer value */
#define CAN_MSR_MTIMESTAMP_MASK (0xffff << CAN_MSR_MTIMESTAMP_SHIFT)
#define CAN_MSR_MDLC_SHIFT (16) /* Bits 16-19: Mailbox Data Length Code */
#define CAN_MSR_MDLC_MASK (15 << CAN_MSR_MDLC_SHIFT)
#define CAN_MSR_MRTR (1 << 20) /* Bit 20: Mailbox Remote Transmission Request */
#define CAN_MSR_MABT (1 << 22) /* Bit 22: Mailbox Message Abort */
#define CAN_MSR_MRDY (1 << 23) /* Bit 23: Mailbox Ready */
#define CAN_MSR_MMI (1 << 24) /* Bit 24: Mailbox Message Ignored */
/* Mailbox Data Low Register (32-bit data low value) */
/* Mailbox Data High Register (32-bit data high value) */
/* Mailbox Control Register */
#define CAN_MCR_MDLC_SHIFT (16) /* Bits 16-19: Mailbox Data Length Code */
#define CAN_MCR_MDLC_MASK (15 << CAN_MCR_MDLC_SHIFT)
# define CAN_MCR_MDLC(n) ((uint32_t)(n) << CAN_MCR_MDLC_SHIFT)
#define CAN_MCR_MRTR (1 << 20) /* Bit 20: Mailbox Remote Transmission Request */
#define CAN_MCR_MACR (1 << 22) /* Bit 22: Abort Request for Mailbox n */
#define CAN_MCR_MTCR (1 << 23) /* Bit 23: Mailbox Transfer Command */
#endif /* __ARCH_ARM_SRC_SAMA5_CHIP_SAM_CAN_H */