esp32s3-devkit: Add support for BMP180 pressure sensor

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>

boards/xtensa/esp32s3/common/src/Make.defs

@@ -36,6 +36,10 @@ ifeq ($(CONFIG_I2C_DRIVER),y)
   CSRCS += esp32s3_board_i2c.c
 endif
 
+ifeq ($(CONFIG_SENSORS_BMP180),y)
+  CSRCS += esp32s3_board_bmp180.c
+endif
+
 DEPPATH += --dep-path src
 VPATH += :src
 CFLAGS += $(shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)board$(DELIM)src)

boards/xtensa/esp32s3/common/src/esp32s3_board_bmp180.c

@@ -0,0 +1,75 @@
+/****************************************************************************
+ * boards/xtensa/esp32s3/common/src/esp32s3_board_bmp180.c
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+#include <stdio.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/i2c/i2c_master.h>
+#include <nuttx/sensors/bmp180.h>
+
+#include "esp32s3_i2c.h"
+#include "esp32s3-devkit.h"
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_bmp180_initialize
+ *
+ * Description:
+ *   Initialize and register the BMP180 Pressure Sensor driver.
+ *
+ * Input Parameters:
+ *   devno - The device number, used to build the device path as /dev/pressN
+ *   busno - The I2C bus number
+ *
+ * Returned Value:
+ *   Zero (OK) on success; a negated errno value on failure.
+ *
+ ****************************************************************************/
+
+int board_bmp180_initialize(int devno, int busno)
+{
+  struct i2c_master_s *i2c;
+  char devpath[12];
+
+  /* Initialize BMP180 */
+
+  i2c = esp32s3_i2cbus_initialize(busno);
+  if (i2c == NULL)
+    {
+      return -ENODEV;
+    }
+
+  /* Register the barometer sensor */
+
+  (void)snprintf(devpath, sizeof(devpath), "/dev/press%d", devno);
+
+  return bmp180_register(devpath, i2c);
+}
+

boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3-devkit.h

@@ -97,5 +97,24 @@ int board_spiflash_init(void);
 int board_i2c_init(void);
 #endif
 
+/****************************************************************************
+ * Name: board_bmp180_initialize
+ *
+ * Description:
+ *   Initialize and register the BMP180 Pressure Sensor driver.
+ *
+ * Input Parameters:
+ *   devno - The device number, used to build the device path as /dev/pressN
+ *   busno - The I2C bus number
+ *
+ * Returned Value:
+ *   Zero (OK) on success; a negated errno value on failure.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_SENSORS_BMP180
+int board_bmp180_initialize(int devno, int busno);
+#endif
+
 #endif /* __ASSEMBLY__ */
 #endif /* __BOARDS_XTENSA_ESP32S3_ESP32S3_DEVKIT_SRC_ESP32S3_DEVKIT_H */

boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c

@@ -141,6 +141,17 @@ int esp32s3_bringup(void)
     }
 #endif
 
+#ifdef CONFIG_SENSORS_BMP180
+  /* Try to register BMP180 device in I2C0 */
+
+  ret = board_bmp180_initialize(0, ESP32S3_I2C0);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR,
+             "Failed to initialize BMP180 driver for I2C0: %d\n", ret);
+    }
+#endif
+
 #ifdef CONFIG_INPUT_BUTTONS
   /* Register the BUTTON driver */