sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix some LPC17xx GPIO/button interrupt logic

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4246 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2011-12-31 23:09:33 +00:00
parent cdd9badaff
commit 323a124d44
2 changed files with 24 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
configs/olimex-lpc1766stk/README.txt
View File

@ -545,9 +545,15 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator
(gdb) symbol-file nuttx
(gdb) load nuttx
Loading the symbol-file is only useful if you have built NuttX to
NOTES:
1. Loading the symbol-file is only useful if you have built NuttX to
inclulde debug symbols (by setting CONFIG_DEBUG_SYMBOLS=y in the
.config file).
2. I usually have to reset, halt, and 'load nuttx' a second time. For
some reason, the first time apparently does not fully program the
FLASH.
3. The MCU must be halted prior to loading code using 'mon reset'
as described below.
OpenOCD will support several special 'monitor' commands. These
GDB commands will send comments to the OpenOCD monitor. Here
@ -556,9 +562,10 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator
(gdb) monitor reset
(gdb) monitor halt
The MCU must be halted prior to loading code. Reset will restart
the processor after loading code. The 'monitor' command can be
abbreviated as just 'mon'.
NOTES:
1. The MCU must be halted using 'mon halt' prior to loading code.
2. Reset will restart the processor after loading code.
3. The 'monitor' command can be abbreviated as just 'mon'.
Olimex LPC1766-STK Configuration Options
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@ -827,6 +834,12 @@ Where <subdir> is one of the following:
Support for the board's SPI-based MicroSD card is included
(but not passing tests as of this writing).
NOTE: If you start the program with no SD card inserted, there will be
a substantial delay. This is because there is no hardware support to sense
whether or not an SD card is inserted. As a result, the driver has to
go through many retries and timeouts before it finally decides that there
is not SD card in the slot.
nx:
And example using the NuttX graphics system (NX). This example
uses the Nokia 6100 LCD driver.

2
configs/olimex-lpc1766stk/src/up_buttons.c
View File

@ -111,7 +111,7 @@ void up_buttoninit(void)
{
int i;
/* Configure the GPIO pins as inputs. */
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
{