sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Cosmetic changes, updates to README files, updates to some comments

Browse Source
This commit is contained in:
Gregory Nutt 2014-06-30 17:52:59 -06:00
parent 1bfcf7b764
commit 3286fd69fe
2 changed files with 12 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
configs/sama5d4-ek/README.txt
View File

@ -3355,9 +3355,17 @@ Configurations
If these behaviors are a problem for you, then you may want to
disable HSMCI0 as well.
9. Networking support via the can be added to NSH by modifying the
configuration. See the "Networking" section above for detailed
configuration settings.
9. Networking is supported via EMAC0. See the "Networking" section
above for detailed configuration settings. DHCP is not used in
this configuration; rather, a hard-coded IP address of 10.0.0.2 is
used with a netmask of 255.255.255.0. The host is assumed to be
10.0.0.1 in places. You can reconfigure to enabled DHCPC or to
change these addresses as you see fit.
Since networking is enabled, you will see some boot-up delays until
the network connection is established. These delays can be quite
large if no network is attached (A production design would bring up
the network asynchronously to avoid these start up delays).
10. The SAMA5D4-EK includes for an AT25 serial DataFlash. That support is
NOT enabled in this configuration. Support for that serial FLASH can

2
configs/viewtool-stm32f107/README.txt
View File

@ -592,7 +592,7 @@ Configurations
3. Since networking is enabled, you will see some boot-up delays when
the network connection is established. These delays can be quite
large is no network is attached (A production design to bring up the
large if no network is attached (A production design to bring up the
network asynchronously to avoid these start up delays).
4. This configuration uses the default USART1 serial console. That