sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

boards/xtensa/esp32: add initial commit for the ESP32-SPARROW-KIT

Browse Source 
ESP32-SPARROW-KIT is built upon ESP32-WROVER-KIT by adding various
peripherals. This is an initial commits that only backports the code
as it is, without further changes.

Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
This commit is contained in:
Robert-Ionut Alexa 2022-11-21 17:05:17 +02:00 committed by Xiang Xiao
parent 98a9762e2a
commit 3351146c0b
18 changed files with 2145 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
boards/Kconfig
View File

@ -253,6 +253,23 @@ config ARCH_BOARD_ESP32_LYRAT
Development Framework (ADF). It is designed for smart speakers and smart-home
applications. This port is for board version 4.3.
config ARCH_BOARD_ESP32_SPARROWKIT
bool "Espressif ESP-SPARROW-KIT"
depends on ARCH_CHIP_ESP32WROVER
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if ESP32_GPIO_IRQ
---help---
ESP32-SPARROW-KIT is a custom-made board based on Espressif's ESP32WROVER chip
and built upon the ESP32-WROVERKIT board. It is designed for a university
course and its purpose is to allow the user to enable support by default for
various peripherals which have been soldered into the board:
LTR308 ambient light sensor
BME680 sensor
MicroSD card slot
SSD1306 OLED display
I2S microphone
config ARCH_BOARD_ESP32_WROVERKIT
bool "Espressif ESP-WROVER-KIT"
depends on ARCH_CHIP_ESP32WROVER
@ -2669,6 +2686,7 @@ config ARCH_BOARD
default "ttgo_eink5_v2" if ARCH_BOARD_TTGO_T5V2_ESP32
default "esp32-ethernet-kit" if ARCH_BOARD_ESP32_ETHERNETKIT
default "esp32-lyrat" if ARCH_BOARD_ESP32_LYRAT
default "esp32-sparrow-kit" if ARCH_BOARD_ESP32_SPARROWKIT
default "esp32-wrover-kit" if ARCH_BOARD_ESP32_WROVERKIT
default "esp32c3-devkit" if ARCH_BOARD_ESP32C3_DEVKIT
default "esp32c3-devkit-rust-1" if ARCH_BOARD_ESP32C3_DEVKIT_RUST1
@ -3672,6 +3690,9 @@ endif
if ARCH_BOARD_ESP32_LYRAT
source "boards/xtensa/esp32/esp32-lyrat/Kconfig"
endif
if ARCH_BOARD_ESP32_SPARROWKIT
source "boards/xtensa/esp32/esp32-sparrow-kit/Kconfig"
endif
if ARCH_BOARD_ESP32_WROVERKIT
source "boards/xtensa/esp32/esp32-wrover-kit/Kconfig"
endif

8
boards/xtensa/esp32/esp32-sparrow-kit/Kconfig Normal file
View File

@ -0,0 +1,8 @@
#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
if ARCH_BOARD_ESP32_SPARROWKIT
endif # ARCH_BOARD_ESP32_SPARROWKIT

45
boards/xtensa/esp32/esp32-sparrow-kit/configs/nsh/defconfig Normal file
View File

@ -0,0 +1,45 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_ARCH_LEDS is not set
# CONFIG_NSH_ARGCAT is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_CMDPARMS is not set
CONFIG_ARCH="xtensa"
CONFIG_ARCH_BOARD="esp32-sparrow-kit"
CONFIG_ARCH_BOARD_COMMON=y
CONFIG_ARCH_BOARD_ESP32_SPARROWKIT=y
CONFIG_ARCH_CHIP="esp32"
CONFIG_ARCH_CHIP_ESP32=y
CONFIG_ARCH_CHIP_ESP32WROVER=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_XTENSA=y
CONFIG_BOARD_LOOPSPERMSEC=16717
CONFIG_BUILTIN=y
CONFIG_ESP32_UART0=y
CONFIG_FS_PROCFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_IDLETHREAD_STACKSIZE=3072
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_MM_REGIONS=3
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=114688
CONFIG_RAM_START=0x20000000
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_START_DAY=6
CONFIG_START_MONTH=12
CONFIG_START_YEAR=2011
CONFIG_SYSTEM_NSH=y
CONFIG_UART0_SERIAL_CONSOLE=y

107
boards/xtensa/esp32/esp32-sparrow-kit/include/board.h Normal file
View File

@ -0,0 +1,107 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/include/board.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_XTENSA_ESP32_ESP32_SPARROW_KIT_INCLUDE_BOARD_H
#define __BOARDS_XTENSA_ESP32_ESP32_SPARROW_KIT_INCLUDE_BOARD_H
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* The ESP32 Wrover kit board uses a 40MHz crystal oscillator. */
#define BOARD_XTAL_FREQUENCY 40000000
#ifdef CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ
# define BOARD_CLOCK_FREQUENCY (CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ * 1000000)
#else
# define BOARD_CLOCK_FREQUENCY 80000000
#endif
/* GPIO definitions *********************************************************/
/* Display */
#define DISPLAY_SPI 2
#define DISPLAY_DC 21
#define DISPLAY_RST 18
#define DISPLAY_BCKL 5
/* LED definitions **********************************************************/
/* Define how many LEDs this board has (needed by userleds) */
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_LED3 2
#define BOARD_NLEDS 3
#define BOARD_LED_RED BOARD_LED1
#define BOARD_LED_GREEN BOARD_LED2
#define BOARD_LED_BLUE BOARD_LED3
/* LED bits for use with autoleds */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 3 LEDs on
* board the ESP-SPARROW-KIT. The following definitions describe how
* NuttX controls the LEDs:
*/
/* These values index an array that contains the bit definitions for the
* correct LEDs (see esp32_autoleds.c).
*/
#define LED_STARTED 0 /* LED2 */
#define LED_HEAPALLOCATE 1 /* LED3 */
#define LED_IRQSENABLED 2 /* LED3 + LED2 */
#define LED_STACKCREATED 3 /* LED3 */
#define LED_INIRQ 4 /* LED1 + LED3 */
#define LED_SIGNAL 5 /* LED2 + LED3 */
#define LED_ASSERTION 6 /* LED1 + LED2 + LED3 */
#define LED_PANIC 7 /* LED1 + N/C + N/C */
/* The values below are used only to distinguish between the CPUs.
* The LEDs are actually mapped as:
* CPU0 -> GPIO_LED1 (Red LED)
* CPU1 -> GPIO_LED2 (Green LED)
* Note that from the previous list only LED_HEAPALLOCATE will still be
* valid. This is to avoid collisions and to keep a way to show a successful
* heap allocation. The LED used is still LED3 (Blue LED).
*/
#ifdef CONFIG_ARCH_LEDS_CPU_ACTIVITY
# define LED_CPU0 8
# define LED_CPU1 9
# define LED_CPU (LED_CPU0 + up_cpu_index())
#endif
/* GPIO pins used by the GPIO Subsystem */
#define BOARD_NGPIOIN 1 /* Amount of GPIO Input pins */
#define BOARD_NGPIOOUT 1 /* Amount of GPIO Output pins */
#define BOARD_NGPIOINT 1 /* Amount of GPIO Input w/ Interruption pins */
#endif /* __BOARDS_XTENSA_ESP32_ESP32_SPARROW_KIT_INCLUDE_BOARD_H */

128
boards/xtensa/esp32/esp32-sparrow-kit/include/board_memorymap.h Normal file
View File

@ -0,0 +1,128 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/include/board_memorymap.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_XTENSA_ESP32_ESP32_SPARROW_KIT_INCLUDE_BOARD_MEMORYMAP_H
#define __BOARDS_XTENSA_ESP32_ESP32_SPARROW_KIT_INCLUDE_BOARD_MEMORYMAP_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <stdint.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Kernel ROM */
#define KIROM_START (uintptr_t)__kirom_start
#define KIROM_SIZE (uintptr_t)__kirom_size
#define KDROM_START (uintptr_t)__kdrom_start
#define KDROM_SIZE (uintptr_t)__kdrom_size
/* Kernel RAM */
#define KIRAM_0_START (uintptr_t)__kiram_0_start
#define KIRAM_0_SIZE (uintptr_t)__kiram_0_size
#define KIRAM_0_END (uintptr_t)__kiram_0_end
#define KIRAM_1_START (uintptr_t)__kiram_1_start
#define KIRAM_1_SIZE (uintptr_t)__kiram_1_size
#define KIRAM_1_END (uintptr_t)__kiram_1_end
#define KDRAM_0_START (uintptr_t)__kdram_0_start
#define KDRAM_0_SIZE (uintptr_t)__kdram_0_size
#define KDRAM_0_END (uintptr_t)__kdram_0_end
#define KDRAM_1_START (uintptr_t)__kdram_1_start
#define KDRAM_1_SIZE (uintptr_t)__kdram_1_size
#define KDRAM_1_END (uintptr_t)__kdram_1_end
/* Exception vectors */
#define VECTORS_START (uintptr_t)__vectors_start
#define VECTORS_END (uintptr_t)__vectors_end
/* User ROM */
#define UIROM_START (uintptr_t)__uirom_start
#define UIROM_SIZE (uintptr_t)__uirom_size
#define UIROM_END (uintptr_t)__uirom_end
#define UDROM_START (uintptr_t)__udrom_start
#define UDROM_SIZE (uintptr_t)__udrom_size
#define UDROM_END (uintptr_t)__udrom_end
/* User RAM */
#define UIRAM_START (uintptr_t)__uiram_start
#define UIRAM_SIZE (uintptr_t)__uiram_size
#define UIRAM_END (uintptr_t)__uiram_end
#define UDRAM_START (uintptr_t)__udram_start
#define UDRAM_SIZE (uintptr_t)__udram_size
#define UDRAM_END (uintptr_t)__udram_end
/****************************************************************************
* Public Data
****************************************************************************/
/* Kernel ROM (RX) */
extern uint8_t __kirom_start[];
extern uint8_t __kirom_size[];
extern uint8_t __kdrom_start[];
extern uint8_t __kdrom_size[];
/* Kernel RAM (RW) */
extern uint8_t __kiram_0_start[];
extern uint8_t __kiram_0_size[];
extern uint8_t __kiram_0_end[];
extern uint8_t __kiram_1_start[];
extern uint8_t __kiram_1_size[];
extern uint8_t __kiram_1_end[];
extern uint8_t __kdram_0_start[];
extern uint8_t __kdram_0_size[];
extern uint8_t __kdram_0_end[];
extern uint8_t __kdram_1_start[];
extern uint8_t __kdram_1_size[];
extern uint8_t __kdram_1_end[];
/* Exception vectors */
extern uint8_t __vectors_start[];
extern uint8_t __vectors_end[];
/* User ROM (RX) */
extern uint8_t __uirom_start[];
extern uint8_t __uirom_size[];
extern uint8_t __uirom_end[];
extern uint8_t __udrom_start[];
extern uint8_t __udrom_size[];
extern uint8_t __udrom_end[];
/* User RAM (RW) */
extern uint8_t __uiram_start[];
extern uint8_t __uiram_size[];
extern uint8_t __uiram_end[];
extern uint8_t __udram_start[];
extern uint8_t __udram_size[];
extern uint8_t __udram_end[];
#endif /* __BOARDS_XTENSA_ESP32_ESP32_SPARROW_KIT_INCLUDE_BOARD_MEMORYMAP_H */

1
boards/xtensa/esp32/esp32-sparrow-kit/scripts/.gitignore vendored Normal file
View File

@ -0,0 +1 @@
/esp32_out.ld

92
boards/xtensa/esp32/esp32-sparrow-kit/scripts/Make.defs Normal file
View File

@ -0,0 +1,92 @@
############################################################################
# boards/xtensa/esp32/esp32-sparrow-kit/scripts/Make.defs
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
###########################################################################
include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk
include $(TOPDIR)/tools/esp32/Config.mk
include $(TOPDIR)/arch/xtensa/src/lx6/Toolchain.defs
# This is the generated memory layout linker script. It will always be
# generated at the board level.
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32_out.ld
# Pick the linker scripts from the board level if they exist, if not
# pick the common linker scripts.
ifneq ($(wildcard $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32.ld),)
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32.ld
else
ifeq ($(CONFIG_BUILD_PROTECTED),y)
ARCHSCRIPT += $(BOARD_COMMON_DIR)$(DELIM)scripts$(DELIM)kernel-space.ld
else
ifeq ($(CONFIG_ESP32_APP_FORMAT_MCUBOOT),y)
ARCHSCRIPT += $(BOARD_COMMON_DIR)$(DELIM)scripts$(DELIM)esp32_mcuboot.ld
else
ARCHSCRIPT += $(BOARD_COMMON_DIR)$(DELIM)scripts$(DELIM)esp32.ld
endif
endif
endif
ifneq ($(wildcard $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32_rom.ld),)
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32_rom.ld
else
ARCHSCRIPT += $(BOARD_COMMON_DIR)$(DELIM)scripts$(DELIM)esp32_rom.ld
endif
ifneq ($(wildcard $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32.template.ld),)
LDSCRIPT_TEMPLATE = $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32.template.ld
else
ifeq ($(CONFIG_BUILD_PROTECTED),y)
LDSCRIPT_TEMPLATE = $(BOARD_COMMON_DIR)$(DELIM)scripts$(DELIM)protected.template.ld
else
LDSCRIPT_TEMPLATE = $(BOARD_COMMON_DIR)$(DELIM)scripts$(DELIM)flat.template.ld
endif
endif
ARCHPICFLAGS = -fpic
# if SPIRAM/PSRAM is used then we need to include a workaround
ifeq ($(CONFIG_ESP32_SPIRAM),y)
ARCHCFLAGS += -mfix-esp32-psram-cache-issue
endif
CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
# Loadable module definitions
CMODULEFLAGS = $(CFLAGS) -mtext-section-literals
LDMODULEFLAGS = -r -e module_initialize
LDMODULEFLAGS += -T $(call CONVERT_PATH,$(TOPDIR)/libs/libc/modlib/gnu-elf.ld)
# ELF module definitions
CELFFLAGS = $(CFLAGS) -mtext-section-literals
CXXELFFLAGS = $(CXXFLAGS) -mtext-section-literals
LDELFFLAGS = -r -e main
LDELFFLAGS += -T $(call CONVERT_PATH,$(TOPDIR)$(DELIM)binfmt$(DELIM)libelf$(DELIM)gnu-elf.ld)

66
boards/xtensa/esp32/esp32-sparrow-kit/src/Make.defs Normal file
View File

@ -0,0 +1,66 @@
#############################################################################
# boards/xtensa/esp32/esp32-sparrow-kit/src/Make.defs
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
#############################################################################
include $(TOPDIR)/Make.defs
CONFIGFILE = $(TOPDIR)$(DELIM)include$(DELIM)nuttx$(DELIM)config.h
CSRCS = esp32_boot.c esp32_bringup.c
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += esp32_autoleds.c
else
CSRCS += esp32_userleds.c
endif
ifeq ($(CONFIG_BOARDCTL),y)
CSRCS += esp32_appinit.c
ifeq ($(CONFIG_BOARDCTL_RESET),y)
CSRCS += esp32_reset.c
endif
endif
ifeq ($(CONFIG_MMCSD),y)
CSRCS += esp32_mmcsd.c
endif
ifeq ($(CONFIG_DEV_GPIO),y)
CSRCS += esp32_gpio.c
endif
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += esp32_buttons.c
endif
SCRIPTOUT = $(BOARD_DIR)$(DELIM)scripts$(DELIM)esp32_out.ld
.PHONY = context distclean
$(SCRIPTOUT): $(LDSCRIPT_TEMPLATE) $(CONFIGFILE)
$(Q) $(CC) -isystem $(TOPDIR)/include -C -P -x c -E $(LDSCRIPT_TEMPLATE) -o $@
context:: $(SCRIPTOUT)
distclean::
$(call DELFILE, $(SCRIPTOUT))
DEPPATH += --dep-path board
VPATH += :board
CFLAGS += $(shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)board$(DELIM)board)

118
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32-sparrow-kit.h Normal file
View File

@ -0,0 +1,118 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32-sparrow-kit.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_XTENSA_ESP32_ESP32_SPARROWKIT_SRC_ESP32_SPARROWKIT_H
#define __BOARDS_XTENSA_ESP32_ESP32_SPARROWKIT_SRC_ESP32_SPARROWKIT_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* ESP-SPARROW-KIT GPIOs ****************************************************/
/* LEDs */
#define GPIO_LED1 0
#define GPIO_LED2 2
#define GPIO_LED3 4
/* BOOT Button */
#define BUTTON_BOOT 0
/* TIMERS */
#define TIMER0 0
#define TIMER1 1
#define TIMER2 2
#define TIMER3 3
/* ONESHOT */
#define ONESHOT_TIMER 1
#define ONESHOT_RESOLUTION_US 1
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: esp32_bringup
*
* Description:
* Perform architecture-specific initialization
*
* CONFIG_BOARD_LATE_INITIALIZE=y :
* Called from board_late_initialize().
*
* CONFIG_BOARD_LATE_INITIALIZE=y && CONFIG_BOARDCTL=y :
* Called from the NSH library via board_app_initialize()
*
****************************************************************************/
int esp32_bringup(void);
/****************************************************************************
* Name: esp32_mmcsd_initialize
*
* Description:
* Initialize SPI-based SD card and card detect thread.
*
****************************************************************************/
int esp32_mmcsd_initialize(int minor);
/****************************************************************************
* Name: esp32_spiflash_init
*
* Description:
* Initialize the SPIFLASH and register the MTD device.
****************************************************************************/
int esp32_spiflash_init(void);
/****************************************************************************
* Name: esp32_gpio_init
****************************************************************************/
#ifdef CONFIG_DEV_GPIO
int esp32_gpio_init(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_XTENSA_ESP32_ESP32_SPARROWKIT_SRC_ESP32_SPARROWKIT_H */

80
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_appinit.c Normal file
View File

@ -0,0 +1,80 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_appinit.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <nuttx/board.h>
#include "esp32-sparrow-kit.h"
#ifdef CONFIG_BOARDCTL
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform application specific initialization. This function is never
* called directly from application code, but only indirectly via the
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
*
* Input Parameters:
* arg - The boardctl() argument is passed to the board_app_initialize()
* implementation without modification. The argument has no
* meaning to NuttX; the meaning of the argument is a contract
* between the board-specific initialization logic and the
* matching application logic. The value could be such things as a
* mode enumeration value, a set of DIP switch settings, a
* pointer to configuration data read from a file or serial FLASH,
* or whatever you would like to do with it. Every implementation
* should accept zero/NULL as a default configuration.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
int board_app_initialize(uintptr_t arg)
{
#ifdef CONFIG_BOARD_LATE_INITIALIZE
/* Board initialization already performed by board_late_initialize() */
return OK;
#else
/* Perform board-specific initialization */
return esp32_bringup();
#endif
}
#endif /* CONFIG_BOARDCTL */

185
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_autoleds.c Normal file
View File

@ -0,0 +1,185 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_autoleds.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "esp32_gpio.h"
#include "esp32-sparrow-kit.h"
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* The following definitions map the encoded LED setting to GPIO settings */
#ifndef CONFIG_ARCH_LEDS_CPU_ACTIVITY
# define LED_STARTED_BITS (BOARD_LED2_BIT)
# define LED_HEAPALLOCATE_BITS (BOARD_LED3_BIT)
# define LED_IRQSENABLED_BITS (BOARD_LED3_BIT | BOARD_LED2_BIT)
# define LED_STACKCREATED_BITS (BOARD_LED3_BIT)
# define LED_INIRQ_BITS (BOARD_LED1_BIT | BOARD_LED3_BIT)
# define LED_SIGNAL_BITS (BOARD_LED2_BIT | BOARD_LED3_BIT)
# define LED_ASSERTION_BITS (BOARD_LED1_BIT | BOARD_LED2_BIT |\
BOARD_LED3_BIT)
# define LED_PANIC_BITS (BOARD_LED1_BIT)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifndef CONFIG_ARCH_LEDS_CPU_ACTIVITY
static const unsigned int g_ledbits[8] =
{
LED_STARTED_BITS,
LED_HEAPALLOCATE_BITS,
LED_IRQSENABLED_BITS,
LED_STACKCREATED_BITS,
LED_INIRQ_BITS,
LED_SIGNAL_BITS,
LED_ASSERTION_BITS,
LED_PANIC_BITS
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
static inline void led_clrbits(unsigned int clrbits)
{
if ((clrbits & BOARD_LED1_BIT) != 0)
{
esp32_gpiowrite(GPIO_LED1, false);
}
if ((clrbits & BOARD_LED2_BIT) != 0)
{
esp32_gpiowrite(GPIO_LED2, false);
}
if ((clrbits & BOARD_LED3_BIT) != 0)
{
esp32_gpiowrite(GPIO_LED3, false);
}
}
static inline void led_setbits(unsigned int setbits)
{
if ((setbits & BOARD_LED1_BIT) != 0)
{
esp32_gpiowrite(GPIO_LED1, true);
}
if ((setbits & BOARD_LED2_BIT) != 0)
{
esp32_gpiowrite(GPIO_LED2, true);
}
if ((setbits & BOARD_LED3_BIT) != 0)
{
esp32_gpiowrite(GPIO_LED3, true);
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_autoled_initialize
****************************************************************************/
void board_autoled_initialize(void)
{
/* Configure LED1-4 GPIOs for output */
esp32_configgpio(GPIO_LED1, OUTPUT);
esp32_configgpio(GPIO_LED2, OUTPUT);
esp32_configgpio(GPIO_LED3, OUTPUT);
}
/****************************************************************************
* Name: board_autoled_on
****************************************************************************/
void board_autoled_on(int led)
{
#ifdef CONFIG_ARCH_LEDS_CPU_ACTIVITY
switch (led)
{
case LED_CPU0:
esp32_gpiowrite(GPIO_LED1, true);
break;
case LED_CPU1:
esp32_gpiowrite(GPIO_LED2, true);
break;
case LED_HEAPALLOCATE:
esp32_gpiowrite(GPIO_LED3, true);
break;
default:
break;
}
#else
led_clrbits(BOARD_LED1_BIT | BOARD_LED2_BIT | BOARD_LED3_BIT);
led_setbits(g_ledbits[led]);
#endif
}
/****************************************************************************
* Name: board_autoled_off
****************************************************************************/
void board_autoled_off(int led)
{
#ifdef CONFIG_ARCH_LEDS_CPU_ACTIVITY
switch (led)
{
case LED_CPU0:
esp32_gpiowrite(GPIO_LED1, false);
break;
case LED_CPU1:
esp32_gpiowrite(GPIO_LED2, false);
break;
case LED_HEAPALLOCATE:
esp32_gpiowrite(GPIO_LED3, false);
break;
default:
break;
}
#else
led_clrbits(g_ledbits[led]);
#endif
}
#endif /* CONFIG_ARCH_LEDS */

101
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_boot.c Normal file
View File

@ -0,0 +1,101 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_boot.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <nuttx/board.h>
#include <nuttx/mm/mm.h>
#include <arch/board/board.h>
#include <arch/esp32/memory_layout.h>
#include "esp32-sparrow-kit.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: esp32_board_initialize
*
* Description:
* All ESP32 architectures must provide the following entry point.
* This entry point is called early in the initialization -- after all
* memory has been configured and mapped but before any devices have been
* initialized.
*
****************************************************************************/
void esp32_board_initialize(void)
{
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
board_autoled_initialize();
#endif
}
/****************************************************************************
* Name: board_late_initialize
*
* Description:
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_late_initialize(). board_late_initialize() will
* be called immediately after up_initialize() is called and just before
* the initial application is started. This additional initialization
* phase may be used, for example, to initialize board-specific device
* drivers.
*
****************************************************************************/
#ifdef CONFIG_BOARD_LATE_INITIALIZE
void board_late_initialize(void)
{
/* Perform board-specific initialization */
esp32_bringup();
#ifdef CONFIG_SMP
/* To avoid corrupting the heap, this region of memory (~3KB) is not
* included until the APP CPU has started.
* So we can't add it with the rest of the regions at xtensa_add_region(),
* that function is called early from up_initialize(). We wait until the
* SMP bringup is complete.
*/
umm_addregion((void *)HEAP_REGION_ROMAPP_START,
(size_t)(HEAP_REGION_ROMAPP_END - HEAP_REGION_ROMAPP_START));
#endif
}
#endif

395
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_bringup.c Normal file
View File

@ -0,0 +1,395 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_bringup.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <syslog.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <syslog.h>
#include <debug.h>
#include <stdio.h>
#include <syslog.h>
#include <errno.h>
#include <nuttx/fs/fs.h>
#include <nuttx/himem/himem.h>
#include "esp32_partition.h"
#include <arch/board/board.h>
#ifdef CONFIG_USERLED
# include <nuttx/leds/userled.h>
#endif
#ifdef CONFIG_TIMER
#include <esp32_tim_lowerhalf.h>
#endif
#ifdef CONFIG_ONESHOT
# include "esp32_board_oneshot.h"
#endif
#ifdef CONFIG_WATCHDOG
# include "esp32_board_wdt.h"
#endif
#ifdef CONFIG_ESP32_SPIFLASH
# include "esp32_board_spiflash.h"
#endif
#ifdef CONFIG_ESP32_BLE
# include "esp32_ble.h"
#endif
#ifdef CONFIG_ESP32_WIFI
# include "esp32_board_wlan.h"
#endif
#ifdef CONFIG_ESP32_I2C
# include "esp32_board_i2c.h"
#endif
#ifdef CONFIG_SENSORS_BMP180
# include "esp32_bmp180.h"
#endif
#ifdef CONFIG_INPUT_BUTTONS
# include <nuttx/input/buttons.h>
#endif
#ifdef CONFIG_VIDEO_FB
# include <nuttx/video/fb.h>
#endif
#ifdef CONFIG_ESP32_RT_TIMER
# include "esp32_rt_timer.h"
#endif
#ifdef CONFIG_LCD_DEV
# include <nuttx/board.h>
# include <nuttx/lcd/lcd_dev.h>
#endif
#ifdef CONFIG_RTC_DRIVER
# include "esp32_rtc_lowerhalf.h"
#endif
#ifdef CONFIG_LCD_BACKPACK
# include "esp32_lcd_backpack.h"
#endif
#include "esp32-sparrow-kit.h"
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: esp32_bringup
*
* Description:
* Perform architecture-specific initialization
*
* CONFIG_BOARD_LATE_INITIALIZE=y :
* Called from board_late_initialize().
*
* CONFIG_BOARD_LATE_INITIALIZE=n && CONFIG_BOARDCTL=y :
* Called from the NSH library
*
****************************************************************************/
int esp32_bringup(void)
{
int ret;
#if defined(CONFIG_ESP32_SPIRAM) && \
defined(CONFIG_ESP32_SPIRAM_BANKSWITCH_ENABLE)
ret = esp_himem_init();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to init HIMEM: %d\n", ret);
}
#endif
#ifdef CONFIG_FS_PROCFS
/* Mount the procfs file system */
ret = nx_mount(NULL, "/proc", "procfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to mount procfs at /proc: %d\n", ret);
}
#endif
#ifdef CONFIG_FS_TMPFS
/* Mount the tmpfs file system */
ret = nx_mount(NULL, CONFIG_LIBC_TMPDIR, "tmpfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to mount tmpfs at %s: %d\n",
CONFIG_LIBC_TMPDIR, ret);
}
#endif
#ifdef CONFIG_LCD_BACKPACK
/* slcd:0, i2c:0, rows=2, cols=16 */
ret = board_lcd_backpack_init(0, 0, 2, 16);
if (ret < 0)
{
syslog(LOG_ERR, "Failed to initialize PCF8574 LCD, error %d\n", ret);
}
#endif
#ifdef CONFIG_MMCSD
ret = esp32_mmcsd_initialize(0);
if (ret < 0)
{
syslog(LOG_ERR, "Failed to initialize SD slot: %d\n", ret);
}
#endif
#ifdef CONFIG_ESP32_SPIFLASH
ret = esp32_spiflash_init();
if (ret)
{
syslog(LOG_ERR, "ERROR: Failed to initialize SPI Flash\n");
}
#endif
#ifdef CONFIG_ESP32_PARTITION_TABLE
ret = esp32_partition_init();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to initialize partition error=%d\n",
ret);
}
#endif
#ifdef CONFIG_ESP32_RT_TIMER
ret = esp32_rt_timer_init();
if (ret < 0)
{
syslog(LOG_ERR, "Failed to initialize RT timer: %d\n", ret);
}
#endif
#ifdef CONFIG_ESP32_BLE
ret = esp32_ble_initialize();
if (ret)
{
syslog(LOG_ERR, "ERROR: Failed to initialize BLE: %d\n", ret);
}
#endif
#ifdef CONFIG_ESP32_WIFI
ret = board_wlan_init();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to initialize wireless subsystem=%d\n",
ret);
}
#endif
/* First, register the timer drivers and let timer 1 for oneshot
* if it is enabled.
*/
#ifdef CONFIG_TIMER
#if defined(CONFIG_ESP32_TIMER0) && !defined(CONFIG_ESP32_RT_TIMER)
ret = esp32_timer_initialize("/dev/timer0", TIMER0);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize timer driver: %d\n",
ret);
}
#endif
#if defined(CONFIG_ESP32_TIMER1) && !defined(CONFIG_ONESHOT)
ret = esp32_timer_initialize("/dev/timer1", TIMER1);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize timer driver: %d\n",
ret);
}
#endif
#ifdef CONFIG_ESP32_TIMER2
ret = esp32_timer_initialize("/dev/timer2", TIMER2);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize timer driver: %d\n",
ret);
}
#endif
#ifdef CONFIG_ESP32_TIMER3
ret = esp32_timer_initialize("/dev/timer3", TIMER3);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize timer driver: %d\n",
ret);
}
#endif
#endif /* CONFIG_TIMER */
/* Now register one oneshot driver */
#if defined(CONFIG_ONESHOT) && defined(CONFIG_ESP32_TIMER1)
ret = esp32_oneshot_init(ONESHOT_TIMER, ONESHOT_RESOLUTION_US);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: esp32_oneshot_init() failed: %d\n", ret);
}
#endif /* CONFIG_ONESHOT */
#ifdef CONFIG_USERLED
/* Register the LED driver */
ret = userled_lower_initialize("/dev/userleds");
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: userled_lower_initialize() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_WATCHDOG
/* Configure watchdog timer */
ret = board_wdt_init();
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize watchdog drivers: %d\n",
ret);
}
#endif
#ifdef CONFIG_DEV_GPIO
ret = esp32_gpio_init();
if (ret < 0)
{
syslog(LOG_ERR, "Failed to initialize GPIO Driver: %d\n", ret);
}
#endif
#ifdef CONFIG_I2C_DRIVER
#ifdef CONFIG_ESP32_I2C0
ret = esp32_i2c_register(0);
if (ret < 0)
{
syslog(LOG_ERR, "Failed to initialize I2C Driver for I2C0: %d\n", ret);
}
#endif
#ifdef CONFIG_ESP32_I2C1
ret = esp32_i2c_register(1);
if (ret < 0)
{
syslog(LOG_ERR, "Failed to initialize I2C Driver for I2C1: %d\n", ret);
}
#endif
#endif
#ifdef CONFIG_SENSORS_BMP180
/* Try to register BMP180 device in I2C0 */
ret = board_bmp180_initialize(0, 0);
if (ret < 0)
{
syslog(LOG_ERR, "Failed to initialize BMP180 driver: %d\n", ret);
}
#endif
#ifdef CONFIG_INPUT_BUTTONS
/* Register the BUTTON driver */
ret = btn_lower_initialize("/dev/buttons");
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: btn_lower_initialize() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_VIDEO_FB
ret = fb_register(0, 0);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to initialize Frame Buffer Driver.\n");
}
#endif
#ifdef CONFIG_LCD_DEV
ret = board_lcd_initialize();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: board_lcd_initialize() failed: %d\n", ret);
}
ret = lcddev_register(0);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: lcddev_register() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_RTC_DRIVER
/* Instantiate the ESP32 RTC driver */
ret = esp32_rtc_driverinit();
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to Instantiate the RTC driver: %d\n", ret);
}
#endif
/* If we got here then perhaps not all initialization was successful, but
* at least enough succeeded to bring-up NSH with perhaps reduced
* capabilities.
*/
UNUSED(ret);
return OK;
}

166
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_buttons.c Normal file
View File

@ -0,0 +1,166 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_buttons.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <debug.h>
#include <errno.h>
#include <stdbool.h>
#include <stdio.h>
#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <nuttx/irq.h>
#include <arch/irq.h>
#include "esp32_gpio.h"
#include "esp32-sparrow-kit.h"
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_button_initialize
*
* Description:
* board_button_initialize() must be called to initialize button resources.
* After that, board_buttons() may be called to collect the current state
* of all buttons or board_button_irq() may be called to register button
* interrupt handlers.
*
****************************************************************************/
uint32_t board_button_initialize(void)
{
esp32_configgpio(BUTTON_BOOT, INPUT_FUNCTION_3 | PULLUP);
return 1;
}
/****************************************************************************
* Name: board_buttons
*
* Description:
* After board_button_initialize() has been called, board_buttons() may be
* called to collect the state of all buttons. board_buttons() returns an
* 8-bit bit set with each bit associated with a button. See the
* BUTTON_*_BIT definitions in board.h for the meaning of each bit.
*
****************************************************************************/
uint32_t board_buttons(void)
{
uint8_t ret = 0;
int i = 0;
int n = 0;
bool b0 = esp32_gpioread(BUTTON_BOOT);
for (i = 0; i < 10; i++)
{
up_mdelay(1); /* TODO */
bool b1 = esp32_gpioread(BUTTON_BOOT);
if (b0 == b1)
{
n++;
}
else
{
n = 0;
}
if (3 == n)
{
break;
}
b0 = b1;
}
iinfo("b=%d n=%d\n", b0, n);
/* Low value means that the button is pressed */
if (!b0)
{
ret = 0x1;
}
return ret;
}
/****************************************************************************
* Name: board_button_irq
*
* Description:
* board_button_irq() may be called to register an interrupt handler that
* will be called when a button is depressed or released. The ID value is
* a button enumeration value that uniquely identifies a button resource.
* See the BUTTON_* definitions in board.h for the meaning of enumeration
* value.
*
****************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
int board_button_irq(int id, xcpt_t irqhandler, void *arg)
{
int ret;
DEBUGASSERT(id == BUTTON_BOOT);
int irq = ESP32_PIN2IRQ(BUTTON_BOOT);
if (NULL != irqhandler)
{
/* Make sure the interrupt is disabled */
esp32_gpioirqdisable(irq);
ret = irq_attach(irq, irqhandler, arg);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: irq_attach() failed: %d\n", ret);
return ret;
}
gpioinfo("Attach %p\n", irqhandler);
gpioinfo("Enabling the interrupt\n");
/* Configure the interrupt for rising and falling edges */
esp32_gpioirqenable(irq, CHANGE);
}
else
{
gpioinfo("Disable the interrupt\n");
esp32_gpioirqdisable(irq);
}
return OK;
}
#endif

391
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_gpio.c Normal file
View File

@ -0,0 +1,391 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_gpio.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <nuttx/irq.h>
#include <arch/irq.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/ioexpander/gpio.h>
#include <arch/board/board.h>
#include "esp32-sparrow-kit.h"
#include "esp32_gpio.h"
#include "hardware/esp32_gpio_sigmap.h"
#if defined(CONFIG_DEV_GPIO) && !defined(CONFIG_GPIO_LOWER_HALF)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#if !defined(CONFIG_ESP32_GPIO_IRQ) && BOARD_NGPIOINT > 0
# error "NGPIOINT is > 0 and GPIO interrupts aren't enabled"
#endif
/* Output pins. GPIO16 is used as an example, any other outputs could be
* used.
*/
#define GPIO_OUT1 16
/* Input pins. GPIO17 is used as an example, any other inputs could be
* used.
*/
#define GPIO_IN1 17
/* Interrupt pins. GPIO22 is used as an example, any other inputs could be
* used.
*/
#define GPIO_IRQPIN1 22
/****************************************************************************
* Private Types
****************************************************************************/
struct esp32gpio_dev_s
{
struct gpio_dev_s gpio;
uint8_t id;
};
struct esp32gpint_dev_s
{
struct esp32gpio_dev_s esp32gpio;
pin_interrupt_t callback;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
#if BOARD_NGPIOOUT > 0
static int gpout_read(struct gpio_dev_s *dev, bool *value);
static int gpout_write(struct gpio_dev_s *dev, bool value);
#endif
#if BOARD_NGPIOIN > 0
static int gpin_read(struct gpio_dev_s *dev, bool *value);
#endif
#if BOARD_NGPIOINT > 0
static int gpint_read(struct gpio_dev_s *dev, bool *value);
static int gpint_attach(struct gpio_dev_s *dev,
pin_interrupt_t callback);
static int gpint_enable(struct gpio_dev_s *dev, bool enable);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#if BOARD_NGPIOOUT > 0
static const struct gpio_operations_s gpout_ops =
{
.go_read = gpout_read,
.go_write = gpout_write,
.go_attach = NULL,
.go_enable = NULL,
};
/* This array maps the GPIO pins used as OUTPUT */
static const uint32_t g_gpiooutputs[BOARD_NGPIOOUT] =
{
GPIO_OUT1
};
static struct esp32gpio_dev_s g_gpout[BOARD_NGPIOOUT];
#endif
#if BOARD_NGPIOIN > 0
static const struct gpio_operations_s gpin_ops =
{
.go_read = gpin_read,
.go_write = NULL,
.go_attach = NULL,
.go_enable = NULL,
};
/* This array maps the GPIO pins used as INTERRUPT INPUTS */
static const uint32_t g_gpioinputs[BOARD_NGPIOIN] =
{
GPIO_IN1
};
static struct esp32gpio_dev_s g_gpin[BOARD_NGPIOIN];
#endif
#if BOARD_NGPIOINT > 0
static const struct gpio_operations_s gpint_ops =
{
.go_read = gpint_read,
.go_write = NULL,
.go_attach = gpint_attach,
.go_enable = gpint_enable,
};
/* This array maps the GPIO pins used as INTERRUPT INPUTS */
static const uint32_t g_gpiointinputs[BOARD_NGPIOINT] =
{
GPIO_IRQPIN1,
};
static struct esp32gpint_dev_s g_gpint[BOARD_NGPIOINT];
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: gpout_read
****************************************************************************/
#if BOARD_NGPIOOUT > 0
static int gpout_read(struct gpio_dev_s *dev, bool *value)
{
struct esp32gpio_dev_s *esp32gpio = (struct esp32gpio_dev_s *)dev;
DEBUGASSERT(esp32gpio != NULL && value != NULL);
DEBUGASSERT(esp32gpio->id < BOARD_NGPIOOUT);
gpioinfo("Reading...\n");
*value = esp32_gpioread(g_gpiooutputs[esp32gpio->id]);
return OK;
}
/****************************************************************************
* Name: gpout_write
****************************************************************************/
static int gpout_write(struct gpio_dev_s *dev, bool value)
{
struct esp32gpio_dev_s *esp32gpio = (struct esp32gpio_dev_s *)dev;
DEBUGASSERT(esp32gpio != NULL);
DEBUGASSERT(esp32gpio->id < BOARD_NGPIOOUT);
gpioinfo("Writing %d\n", (int)value);
esp32_gpiowrite(g_gpiooutputs[esp32gpio->id], value);
return OK;
}
#endif
/****************************************************************************
* Name: gpin_read
****************************************************************************/
#if BOARD_NGPIOIN > 0
static int gpin_read(struct gpio_dev_s *dev, bool *value)
{
struct esp32gpio_dev_s *esp32gpio = (struct esp32gpio_dev_s *)dev;
DEBUGASSERT(esp32gpio != NULL && value != NULL);
DEBUGASSERT(esp32gpio->id < BOARD_NGPIOIN);
gpioinfo("Reading... pin %d\n", g_gpioinputs[esp32gpio->id]);
*value = esp32_gpioread(g_gpioinputs[esp32gpio->id]);
return OK;
}
#endif
/****************************************************************************
* Name: esp32gpio_interrupt
****************************************************************************/
#if BOARD_NGPIOINT > 0
static int esp32gpio_interrupt(int irq, void *context, void *arg)
{
struct esp32gpint_dev_s *esp32gpint =
(struct esp32gpint_dev_s *)arg;
DEBUGASSERT(esp32gpint != NULL && esp32gpint->callback != NULL);
gpioinfo("Interrupt! callback=%p\n", esp32gpint->callback);
esp32gpint->callback(&esp32gpint->esp32gpio.gpio,
esp32gpint->esp32gpio.id);
return OK;
}
/****************************************************************************
* Name: gpint_read
****************************************************************************/
static int gpint_read(struct gpio_dev_s *dev, bool *value)
{
struct esp32gpint_dev_s *esp32gpint =
(struct esp32gpint_dev_s *)dev;
DEBUGASSERT(esp32gpint != NULL && value != NULL);
DEBUGASSERT(esp32gpint->esp32gpio.id < BOARD_NGPIOINT);
gpioinfo("Reading int pin...\n");
*value = esp32_gpioread(g_gpiointinputs[esp32gpint->esp32gpio.id]);
return OK;
}
/****************************************************************************
* Name: gpint_attach
****************************************************************************/
static int gpint_attach(struct gpio_dev_s *dev,
pin_interrupt_t callback)
{
struct esp32gpint_dev_s *esp32gpint =
(struct esp32gpint_dev_s *)dev;
int irq = ESP32_PIN2IRQ(g_gpiointinputs[esp32gpint->esp32gpio.id]);
int ret;
gpioinfo("Attaching the callback\n");
/* Make sure the interrupt is disabled */
esp32_gpioirqdisable(irq);
ret = irq_attach(irq,
esp32gpio_interrupt,
&g_gpint[esp32gpint->esp32gpio.id]);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: gpint_attach() failed: %d\n", ret);
return ret;
}
gpioinfo("Attach %p\n", callback);
esp32gpint->callback = callback;
return OK;
}
/****************************************************************************
* Name: gpint_enable
****************************************************************************/
static int gpint_enable(struct gpio_dev_s *dev, bool enable)
{
struct esp32gpint_dev_s *esp32gpint =
(struct esp32gpint_dev_s *)dev;
int irq = ESP32_PIN2IRQ(g_gpiointinputs[esp32gpint->esp32gpio.id]);
if (enable)
{
if (esp32gpint->callback != NULL)
{
gpioinfo("Enabling the interrupt\n");
/* Configure the interrupt for rising edge */
esp32_gpioirqenable(irq, RISING);
}
}
else
{
gpioinfo("Disable the interrupt\n");
esp32_gpioirqdisable(irq);
}
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: esp32_gpio_init
****************************************************************************/
int esp32_gpio_init(void)
{
int pincount = 0;
int i;
#if BOARD_NGPIOOUT > 0
for (i = 0; i < BOARD_NGPIOOUT; i++)
{
/* Setup and register the GPIO pin */
g_gpout[i].gpio.gp_pintype = GPIO_OUTPUT_PIN;
g_gpout[i].gpio.gp_ops = &gpout_ops;
g_gpout[i].id = i;
gpio_pin_register(&g_gpout[i].gpio, pincount);
/* Configure the pins that will be used as output */
esp32_gpio_matrix_out(g_gpiooutputs[i], SIG_GPIO_OUT_IDX, 0, 0);
esp32_configgpio(g_gpiooutputs[i], OUTPUT_FUNCTION_3 |
INPUT_FUNCTION_3);
esp32_gpiowrite(g_gpiooutputs[i], 0);
pincount++;
}
#endif
#if BOARD_NGPIOIN > 0
for (i = 0; i < BOARD_NGPIOIN; i++)
{
/* Setup and register the GPIO pin */
g_gpin[i].gpio.gp_pintype = GPIO_INPUT_PIN;
g_gpin[i].gpio.gp_ops = &gpin_ops;
g_gpin[i].id = i;
gpio_pin_register(&g_gpin[i].gpio, pincount);
/* Configure the pins that will be used as INPUT */
esp32_configgpio(g_gpioinputs[i], INPUT_FUNCTION_3);
pincount++;
}
#endif
#if BOARD_NGPIOINT > 0
for (i = 0; i < BOARD_NGPIOINT; i++)
{
/* Setup and register the GPIO pin */
g_gpint[i].esp32gpio.gpio.gp_pintype = GPIO_INTERRUPT_PIN;
g_gpint[i].esp32gpio.gpio.gp_ops = &gpint_ops;
g_gpint[i].esp32gpio.id = i;
gpio_pin_register(&g_gpint[i].esp32gpio.gpio, pincount);
/* Configure the pins that will be used as interrupt input */
esp32_configgpio(g_gpiointinputs[i], INPUT_FUNCTION_3 | PULLDOWN);
pincount++;
}
#endif
return OK;
}
#endif /* CONFIG_DEV_GPIO && !CONFIG_GPIO_LOWER_HALF */

84
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_mmcsd.c Normal file
View File

@ -0,0 +1,84 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_mmcsd.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <debug.h>
#include <nuttx/config.h>
#include <nuttx/mmcsd.h>
#include <nuttx/spi/spi.h>
#include <pthread.h>
#include <sched.h>
#include <time.h>
#include <unistd.h>
#include "esp32_spi.h"
#include "esp32-sparrow-kit.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Definitions
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: esp32_mmcsd_initialize
*
* Description:
* Initialize SPI-based SD card and card detect thread.
****************************************************************************/
int esp32_mmcsd_initialize(int minor)
{
struct spi_dev_s *spi;
int rv;
mcinfo("INFO: Initializing mmcsd card\n");
spi = esp32_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
if (spi == NULL)
{
mcerr("ERROR: Failed to initialize SPI port %d\n", 2);
return -ENODEV;
}
rv = mmcsd_spislotinitialize(minor, 0, spi);
if (rv < 0)
{
mcerr("ERROR: Failed to bind SPI port %d to SD slot %d\n",
2, 0);
return rv;
}
spiinfo("INFO: mmcsd card has been initialized successfully\n");
return OK;
}

63
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_reset.c Normal file
View File

@ -0,0 +1,63 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_reset.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/arch.h>
#include <nuttx/board.h>
#ifdef CONFIG_BOARDCTL_RESET
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_reset
*
* Description:
* Reset board. Support for this function is required by board-level
* logic if CONFIG_BOARDCTL_RESET is selected.
*
* Input Parameters:
* status - Status information provided with the reset event. This
* meaning of this status information is board-specific. If not
* used by a board, the value zero may be provided in calls to
* board_reset().
*
* Returned Value:
* If this function returns, then it was not possible to power-off the
* board due to some constraints. The return value in this case is a
* board-specific reason for the failure to shutdown.
*
****************************************************************************/
int board_reset(int status)
{
up_systemreset();
return 0;
}
#endif /* CONFIG_BOARDCTL_RESET */

94
boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_userleds.c Normal file
View File

@ -0,0 +1,94 @@
/****************************************************************************
* boards/xtensa/esp32/esp32-sparrow-kit/src/esp32_userleds.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "esp32_gpio.h"
#include "esp32-sparrow-kit.h"
/****************************************************************************
* Private Data
****************************************************************************/
/* This array maps an LED number to GPIO pin configuration */
static const uint32_t g_ledcfg[BOARD_NLEDS] =
{
GPIO_LED1, GPIO_LED2, GPIO_LED3
};
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_userled_initialize
****************************************************************************/
uint32_t board_userled_initialize(void)
{
uint8_t i;
/* Configure the LEDs GPIOs as outputs */
for (i = 0; i < BOARD_NLEDS; i++)
{
esp32_configgpio(g_ledcfg[i], OUTPUT);
}
return BOARD_NLEDS;
}
/****************************************************************************
* Name: board_userled
****************************************************************************/
void board_userled(int led, bool ledon)
{
if ((unsigned)led < BOARD_NLEDS)
{
esp32_gpiowrite(g_ledcfg[led], ledon);
}
}
/****************************************************************************
* Name: board_userled_all
****************************************************************************/
void board_userled_all(uint32_t ledset)
{
uint8_t i;
for (i = 0; i < BOARD_NLEDS; i++)
{
esp32_gpiowrite(g_ledcfg[i], (ledset & (1 << i)) != 0);
}
}