diff --git a/configs/stm3210e-eval/RIDE/defconfig b/configs/stm3210e-eval/RIDE/defconfig
index cc08dc9c01..5ad48fd6f1 100755
--- a/configs/stm3210e-eval/RIDE/defconfig
+++ b/configs/stm3210e-eval/RIDE/defconfig
@@ -67,6 +67,7 @@
 #   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
 #   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
 #
 CONFIG_ARCH=arm
 CONFIG_ARCH_ARM=y
@@ -86,6 +87,7 @@ CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
 
 #
 # Identify toolchain
diff --git a/configs/stm3210e-eval/include/board.h b/configs/stm3210e-eval/include/board.h
index 4792ab6aff..7950541360 100755
--- a/configs/stm3210e-eval/include/board.h
+++ b/configs/stm3210e-eval/include/board.h
@@ -41,6 +41,7 @@
  * Included Files
  ************************************************************************************/
 
+#include <nuttx/config.h>
 #ifndef __ASSEMBLY__
 # include <sys/types.h>
 #endif
diff --git a/configs/stm3210e-eval/nsh/defconfig b/configs/stm3210e-eval/nsh/defconfig
index 5a41b5b1ee..bcf5723887 100755
--- a/configs/stm3210e-eval/nsh/defconfig
+++ b/configs/stm3210e-eval/nsh/defconfig
@@ -67,6 +67,7 @@
 #   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
 #   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
 #
 CONFIG_ARCH=arm
 CONFIG_ARCH_ARM=y
@@ -86,6 +87,7 @@ CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=y
 
 #
 # Identify toolchain and linker options
diff --git a/configs/stm3210e-eval/ostest/defconfig b/configs/stm3210e-eval/ostest/defconfig
index 0ea76f6cdf..b6fd693a34 100755
--- a/configs/stm3210e-eval/ostest/defconfig
+++ b/configs/stm3210e-eval/ostest/defconfig
@@ -67,6 +67,7 @@
 #   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
 #   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
 #
 CONFIG_ARCH=arm
 CONFIG_ARCH_ARM=y
@@ -86,6 +87,7 @@ CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
 
 #
 # Identify toolchain and linker options
diff --git a/configs/stm3210e-eval/src/up_boot.c b/configs/stm3210e-eval/src/up_boot.c
index afa03d074b..527f9d9192 100755
--- a/configs/stm3210e-eval/src/up_boot.c
+++ b/configs/stm3210e-eval/src/up_boot.c
@@ -71,18 +71,7 @@
  ************************************************************************************/
 
 void stm32_boardinitialize(void)
-{
-  /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
-   * brought into the build
-   */
-
-#if defined(CONFIG_STM32_DMA1) || defined(CONFIG_STM32_DMA2)
-  if (stm32_dmainitialize)
-    {
-      stm32_dmainitialize();
-    }
-#endif
-
+{
   /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
    * stm32_spiinitialize() has been brought into the link.
    */
@@ -93,18 +82,18 @@ void stm32_boardinitialize(void)
       stm32_spiinitialize();
     }
 #endif
-
-   /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
-    * disabled, and 3) the weak function stm32_usbinitialize() has been brought
-    * into the build.
-    */
-
-#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
+
+   /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
+    * disabled, and 3) the weak function stm32_usbinitialize() has been brought
+    * into the build.
+    */
+
+#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
   if (stm32_usbinitialize)
     {
       stm32_usbinitialize();
     }
-#endif
+#endif
 
   /* Configure on-board LEDs if LED support has been selected. */
 
diff --git a/configs/stm3210e-eval/usbserial/defconfig b/configs/stm3210e-eval/usbserial/defconfig
index 23910eb2d3..77fd6212b2 100755
--- a/configs/stm3210e-eval/usbserial/defconfig
+++ b/configs/stm3210e-eval/usbserial/defconfig
@@ -67,6 +67,7 @@
 #   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
 #   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
 #
 CONFIG_ARCH=arm
 CONFIG_ARCH_ARM=y
@@ -86,6 +87,7 @@ CONFIG_ARCH_BOOTLOADER=n
 CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
 
 #
 # Identify toolchain and linker options