diff --git a/configs/sam3u-ek/README.txt b/configs/sam3u-ek/README.txt
index 4bb8caa2e3..5c673f6b10 100644
--- a/configs/sam3u-ek/README.txt
+++ b/configs/sam3u-ek/README.txt
@@ -583,8 +583,8 @@ Configuration sub-directories
             CONFIG_ADS7843E_SPIDEV=2          : Use SPI CS 2 for communication
             CONFIG_ADS7843E_SPIMODE=0         : Use SPI mode 0
             CONFIG_ADS7843E_FREQUENCY=1000000 : SPI BAUD 1MHz
-            CONFIG_ADS7843E_THRESHX=39        : These will probably need to be tuned
-            CONFIG_ADS7843E_THRESHY=51
+            CONFIG_ADS7843E_THRESHX=51        : These will probably need to be tuned
+            CONFIG_ADS7843E_THRESHY=39
 
           System Type -> Peripherals:
             CONFIG_SAM34_SPI=y                : Enable support for SPI
diff --git a/configs/sam4l-xplained/README.txt b/configs/sam4l-xplained/README.txt
index bb7ffa71a2..1525a94e04 100644
--- a/configs/sam4l-xplained/README.txt
+++ b/configs/sam4l-xplained/README.txt
@@ -739,18 +739,17 @@ Configuration sub-directories
       an 'unsigned long int'.  If this error occurs, then you may need to
       toggle the value of CONFIG_CXX_NEWLONG.
 
-      STATUS:  As of 2013-6-18, the microSD slot on the I/O1 is marginally
-      functional but needs more TLC.  It seems to behave poorly when
-      debug output is enabled -- know idea why.  And writing to the SD card
-      does not work.  Here is some example of the bad write behavior:
+      STATUS:  As of 2013-6-18, this configuration appears completely
+      functional.  Testing, however, has been very light.  Example:
 
         NuttShell (NSH) NuttX-6.28
         nsh> mount -t vfat /dev/mmcsd0 /mnt/stuff
         nsh> ls /mnt/stuff
         /mnt/stuff:
-         sharmanto.txt
-        nsh> cat /mnt/stuff/sharmanto.txt
-        Hi, from Sharmanto
         nsh> echo "This is a test" >/mnt/stuff/atest.txt
         nsh> ls /mnt/stuff
         /mnt/stuff:
+         atest.txt
+        nsh> cat /mnt/stuff/atest.txt
+        This is a test
+        nsh>